检索结果-南通市图书馆

Power Quality Improvement and Signal Conditioning of PV Array and Grid Interfaced Off-board Charger for Electric Vehicles with V2G and G2V Capabilities

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electrical Engineering 2023年第4期9卷 132-143页

作者： Shailendra Kumar Tapesh Upadhyay om hari gupta Department of Electrical Engineering Indian Institute of TechnologyBhilai 492015India Department of Electrical Engineering Maulana Azad National Institute of Technology(MANIT)Bhopal 462003India Department of Electrical Engineering National Institute of TechnologyJamshedpur 831014India

In this work,we present a photovoltaic(PV)-based off-board charging system integrated with the grid using a voltage source converter(VSC).The control of the grid-tied off-board charger is derived from the joint logarithmic hyperbolic cosine robust sparse adaptive filter(JLHCAF)*** algorithm effectively tracks the fundamental component of the load current in a short duration,providing a good dynamic *** to its robustness against impulsive interference,the JLHCAF outperforms other sparsity-aware robust algorithms The cascaded proportional-integral(PI)controller is used to control the bidirectional buck-boost converter for electric vehicle(EV)charging/discharging,which acts in buck operation if the EV is being charged and in boost operation if it is *** reference DC link voltage for the controller is derived by using adaptive MPPT *** bidirectional properties of the system enable various functions,including grid-to-vehicle(G2V),vehicle-to-grid(V2G),PV source-to-grid(PV2G),vehicle-to-home(V2H),and PV source-to-vehicle(PV2V)***,the system can supply power to critical nonlinear *** control strategy ensures compliance with the power quality requirements set by the IEEE standard,as demonstrated in the *** validate the effectiveness of the proposed system,we conducted tests under dynamic conditions by disconnecting and reconnecting household ***,the off-board charging system was subjected to actual conditions,such as variations in solar PV insolation,and its steady-state performance was evaluated through simulation and laboratory experimental *** results,including total harmonic distortion(THD),support the validation of the developed charging system.

关键词： Grid to vehicle(G2V) vehicle to grid(V2G) off-board charger(OBC) power quality total harmonic distortion(THD) electrical vehicles(EVs)

Optimal Control of Nonlinear Inverted Pendulum System Using PID Controller and LQR: Performance Analysis Without and With Disturbance Input

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Automation and computing 2014年第6期11卷 661-670页

作者： Lal Bahadur Prasad Barjeev Tyagi hari om gupta Department of Electrical Engineering Indian Institute of Technology Roorkee Uttarakhand 247667 India

Linear quadratic regulator(LQR) and proportional-integral-derivative(PID) control methods, which are generally used for control of linear dynamical systems, are used in this paper to control the nonlinear dynamical system. LQR is one of the optimal control techniques, which takes into account the states of the dynamical system and control input to make the optimal control *** nonlinear system states are fed to LQR which is designed using a linear state-space model. This is simple as well as robust. The inverted pendulum, a highly nonlinear unstable system, is used as a benchmark for implementing the control methods. Here the control objective is to control the system such that the cart reaches a desired position and the inverted pendulum stabilizes in the upright position. In this paper, the modeling and simulation for optimal control design of nonlinear inverted pendulum-cart dynamic system using PID controller and LQR have been presented for both cases of without and with disturbance input. The Matlab-Simulink models have been developed for simulation and performance analysis of the control schemes. The simulation results justify the comparative advantage of LQR control method.

关键词： Inverted pendulum nonlinear system proportional-integral-derivative (PID) control optimal control linear quadratic regulator (LQR)

On dry machining of AZ31B magnesium alloy using textured cutting tool inserts

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1608-1618页

作者： Shailendra Pawanr Kapil gupta Department of Mechanical and Industrial Engineering Technology University of JohannesburgDoornfontein CampusJohannesburg 2028 South Africa

Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and *** undergo extensive cutting or machining while making products out of *** cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip *** of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining *** paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium *** results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting *** tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was *** chips are discontinuous at low cutting speeds,while continuous at high cutting *** dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.

关键词： Magnesium alloy Dry machining Textured tools Flank wear Sustainability

Direct scaling of residual displacements for bilinear and pinching oscillators

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 129-149页

作者： Mohammad Saifullah Vinay K.gupta Department of Civil Engineering Indian Institute of Technology KanpurKanpur 208016India

The estimation of residual displacements in a structure due to an anticipated earthquake event has increasingly become an important component of performance-based earthquake engineering because controlling these displacements plays an important role in ensuring cost-feasible or cost-effective repairs in a damaged structure after the *** attempt is made in this study to obtain statistical estimates of constant-ductility residual displacement spectra for bilinear and pinching oscillators with 5%initial damping,directly in terms of easily available seismological,site,and model *** of the available models for the bilinear and pinching oscillators are useful when design spectra for a seismic hazard at a site are not *** statistical estimates of a residual displacement spectrum are proposed in terms of earthquake magnitude,epicentral distance,site geology parameter,and three model parameters for a given set of ductility demand and a hysteretic energy capacity coefficient in the case of bilinear and pinching models,as well as for a given set of pinching parameters for displacement and strength at the breakpoint in the case of pinching model *** proposed scaling model is applicable to horizontal ground motions in the western *** earthquake magnitudes less than 7 or epicentral distances greater than 20 km.

关键词： residual displacement spectrum bilinear hysteresis model pinching hysteresis model nonlinear analysis scaling model

Optimizing calcination of coal by-products for maximizing REE leaching recovery and minimizing Al,Ca,and Fe contamination

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1354-1365,I0006页

作者： Tushar gupta Ahmad Nawab Rick Honaker MP Materials Mountain Pass Mine 67750 Bailey RoadMountain PassCA92366USA Department of Mining Engineering University of KentuckyLexingtonKY40506USA

High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable ***,the recovery of contaminants such as Al,Fe,and Ca also increases *** objective of the study was to maximize the REE extraction while minimizing the concentration of contaminant ions(Al,Ca,and Fe)in the leach *** density fractions of the coarse refuse from the Baker and Fire Clay seam coal refuse were pulverized to a top size of 180μm and used as a feedstock for the *** the samples generated from thermal treatment were leached at 1%(w/v)using 1.2 mol/L sulfuric acid at 75℃ for 2 *** results from a parametric program based on a Box-Behnken design were used for modeling and optimization of three operating parameters associated with the lab-scale calcination *** parameters included temperature(400-800℃),ramp rate(2-10℃/min)and holding time(0-120 min).It was determined that the calcination temperature was the most significant parameter influencing REE *** majority of the heavy rare earth elements(HREEs)were found to be present in an insoluble form in the calcination products and were marginally affected by thermal treatment.A strong correlation between light rare earth elements recovery(LREEs)and Al suggested a possible association with *** optimum operating conditions for high REE recovery with comparatively lower contaminant concentration for 1.6 specific gravity float and 2.2 sink fractions of Baker and Fire Clay seam material were determined to be at 776,800℃ and 407,800℃,calcining temperatures,respectively.A higher optimum temperature of 1.6 float fraction of Baker seam relative to Fire Clay seam material was due to elevated pyrite concentration in Baker seam *** treatment at 400℃ converted pyrite into a soluble intermedium iron oxide,resulting in a high Fe content in the ***

关键词： Calcination Optimization Rare earth elements Coal refuse

Operator Equations Inducing Some Generalizations of Slant Hankel Operators

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第8期40卷 2017-2036页

作者： Gopal DATT Bhawna Bansal gupta Department of Mathematics PGDAV CollegeUniversity of DelhiNew Delhi-110065India Department of Mathematics Miranda HouseUniversity of DelhiDelhi-110007India

An extension of slant Hankel operator,namely,the kth-orderλ-slant Hankel operator on the Lebesgue space L^(2)(T^(n)),where T is the unit circle and n≥1,a natural number,is described in terms of the solution of a system of operator equations,which is subsequently expressed in terms of the product of a slant Hankel operator and a unitary *** study is further lifted in Calkin algebra in terms of essentially kth-orderλ-slant Hankel operators on L^(2)(T^(n)).

关键词： Hankel operator Lebesgue space of n-dimensional torus kth-order slant Hankel operator essentially kth-orderλ-slant Hankel operator

Multi-head neural networks for simulating particle breakage dynamics

在线全文

学校读者我要写书评

暂无评论

Theoretical & Applied Mechanics Letters 2024年第2期14卷 130-141页

作者： Abhishek gupta Barada Kanta Mishra School of Mechanical Sciences Indian Institute of Technology(IIT)GoaPonda 403401India School of Chemical and Materials Science Indian Institute of Technology(IIT)GoaPonda 403401India

The breakage of brittle particulate materials into smaller particles under compressive or impact loads can be modelled as an instantiation of the population balance integro-differential *** this paper,the emerging computational science paradigm of physics-informed neural networks is studied for the first time for solving both linear and nonlinear variants of the governing *** conventional methods,the proposed neural network provides rapid simulations of arbitrarily high resolution in particle size,predicting values on arbitrarily fine grids without the need for model *** network is assigned a simple multi-head architecture tailored to uphold monotonicity of the modelled cumulative distribution function over particle *** method is theoretically analyzed and validated against analytical results before being applied to real-world data of a batch grinding *** agreement between laboratory data and numerical simulation encourages the use of physics-informed neural nets for optimal planning and control of industrial comminution processes.

关键词： Particle breakage dynamics Population balance equation Physics-informed neural networks

Microstructural, wettability, and corrosion behaviour of TiO_(2) thin film sputtered on aluminium

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第7期31卷 2210-2224页

作者： Rajeev VERMA Vijay KUMAR Saurabh KANGO Amindra KHILLA Rajeev gupta Department of Industrial and Production Engineering Dr B R Ambedkar National Institute of Technology JalandharJalandhar-144008PunjabIndia Department of Mechanical Engineering Dr B R Ambedkar National Institute of Technology JalandharJalandhar-144008PunjabIndia Department of Physics School of EngineeringUniversity of Petroleum&Energy StudiesDehradun 248007UttarakhandIndia

The study investigated the application of radiofrequency(RF)-sputtered TiO2 coatings at various temperatures to enhance the hydrophobicity and corrosion resistance of Al6061 *** research aimed to establish a correlation between the coating process and the resulting surface *** roughness and wettability were quantified with a surface profilometer and ***,chemical boiling and salt spray corrosion tests were conducted to evaluate any topographical changes during these *** analysis further involved the use of field-emission scanning electron microscopy(FESEM),energy-dispersive spectroscopy(EDS),and X-ray diffraction(XRD)techniques to characterize the deposited *** findings indicated that the TiO2 coating applied at 500℃exhibited the highest water contact angle and superior corrosion resistance compared to other *** characterization confirmed that this specific TiO_(2) coating at 500℃ effectively delays corrosion due to its hydrophobic behavior,making it durable for industrial applications.

关键词： aluminium TiO_(2)coating radiofrequency-sputtering hydrophobic corrosion

Prediabetes in children and adolescents:A ticking bomb!

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Pediatrics 2024年第2期13卷 11-15页

作者： Anju gupta Nitin Choudhary Nishkarsh gupta Department of Anesthesiology Pain Medicine and Critical CareAll India Institute of Medical ScienceNew Delhi 110076India Department of Onco-Anesthesiology and Palliative Medicine All India Institute of Medical ScienceNew Delhi 110029India

Prediabetes in children and adolescents is on the rise which has drawn significant attention over the past *** is an early warning sign of the underlying pathophysiological changes which in due course of time might compound into type II diabetes *** incidence of prediabetes in adolescents ranges from 4%-23%which is alarmingly high and requires active intervention from the *** have discussed early identification of high-risk patients,prompt screening and active intervention to manage this growing problem.

关键词： Prediabetes Children Adolescents Glucose metabolism Complications