检索结果-南通市图书馆

Hybrid Strategy of Partitioned and Monolithic Methods for Solving Strongly Coupled Analysis of Inverse and Direct Piezoelectric and Circuit Coupling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第8期140卷 1371-1386页

作者： Daisuke Ishihara Syunnosuke Nozaki tomoya Niho Naoto Takayama Department of Intelligent and Control Systems Kyushu Institute of TechnologyFukuokaJapan

The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy *** strongly coupled analysis methods based on direct numerical modeling for this phenomenon can be classified into partitioned or monolithic *** formulation has its advantages and disadvantages,and the choice depends on the characteristics of each coupled *** study proposes a new option:a coupled analysis strategy that combines the best features of the existing formulations,namely,the hybrid partitioned-monolithic *** analysis of inverse piezoelectricity and the monolithic analysis of direct piezoelectric and circuit interaction are strongly coupled using a partitioned iterative hierarchical *** a typical benchmark problem of a piezoelectric energy harvester,this research compares the results from the proposed method to those from the conventional strongly coupled partitioned iterative method,discussing the accuracy,stability,and computational *** proposed hybrid concept is effective for coupled multi-physics problems,including various coupling conditions.

关键词： Structure-piezoelectric-circuit interaction energy harvesting partitioned method monolithic method hybrid method

Investigation of Inside-Out Tracking Methods for Six Degrees of Freedom Pose Estimation of a Smartphone in Augmented Reality

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第5期79卷 3047-3065页

作者： Chanho Park Takefumi ogawa Graduate School of Engineering The University of TokyoTokyo113-0033Japan Information Technology Center The University of TokyoChiba277-0882Japan

Six degrees of freedom(6DoF)input interfaces are essential formanipulating virtual objects through translation or rotation in three-dimensional(3D)space.A traditional outside-in tracking controller requires the installation of expensive hardware in *** inside-out tracking controllers have been proposed,they often suffer from limitations such as interaction limited to the tracking range of the sensor(e.g.,a sensor on the head-mounted display(HMD))or the need for pose value modification to function as an input interface(e.g.,a sensor on the controller).This study investigates 6DoF pose estimation methods without restricting the tracking range,using a smartphone as a controller in augmented reality(AR)*** approach involves proposing methods for estimating the initial pose of the controller and correcting the pose using an inside-out tracking *** addition,seven pose estimation algorithms were presented as candidates depending on the tracking range of the device sensor,the tracking method(e.g.,marker recognition,visual-inertial odometry(VIO)),and whether modification of the initial pose is *** two experiments(discrete and continuous data),the performance of the algorithms was *** results demonstrate enhanced final pose accuracy achieved by correcting the initial ***,the importance of selecting the tracking algorithm based on the tracking range of the devices and the actual input value of the 3D interaction was emphasized.

关键词： Smartphone inside-out tracking 6DoF pose 3D interaction augmented reality

Natural Convection Melting in a Rectangular Heat Storage Tank of Carbon Nanotube Dispersed Latent Heat Storage Material

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 847-855页

作者： Shin-ichi MORITA tomoya SAITO Kazunori TAKAI Yasutaka HAYAMIZU Naoto HARUKI Division of Mechanical and Electrical Engineering Kitami Institute of Technology165 Koen-choKitami-shiHokkaido090-8507Japan National Institute of Technology Yonago College4448 Hikona-cyoYonago-shiTottori683-8502Japan Okayama Prefectural University 111 KubokiSoja-shiOkayama719-1197Japan

A dispersion system fluid can convect even if the dispersoid is a solid ***,heat exchange performance can be improved while maintaining fluidity using a material with high thermal conductivity as the *** study presents the melting performance evaluation results of a latent heat storage material with a carbon nanotube(CNT)dispersion system with high thermal conductivity,which enhances the thermal conductivity of the latent heat storage material and does not limit free *** the thermal conductivity and enhancing the melting convection of the heat storage material result in increased latent heat storage *** this study,the thermal conductivity of the latent heat storage material was successfully increased by dispersing CNTs in the *** 0.1%(in mass)of multi-wall CNT(MWCNT)was dispersed in a paraffin-based latent heat storage material,the shear stress increased by 1.5 times at a shear rate of 500 s^(-1),while taking into account the potential effects of convective ***,a latent heat storage experiment was conducted in a rectangular heat storage tank using the CNT dispersion composition ratio as a parameter.A rectangular vessel with a heated vertical surface was used for the latent heat storage *** melting speed was determined by comparing the amount of latent heat stored in a CNT-dispersed latent heat storage material and a single-phase latent heat storage material *** experimental results show that the time required for the latent heat storage material to completely melt in the heat storage tank was the shortest for the single-phase latent heat storage material ***,the fastest melting progress was observed for the sample with 0.02%(in mass)MWCNT content in the melting rate range of up to approximately 40%in the *** results indicate that this phenomenon is caused by the difference in the melting rates in the upper part of the *** generated data are useful for det

关键词： latent heat storage phase change carbon nano tube free convection heat transfer

Evaluation of temperature dependent vortex pinning properties in strongly pinned YBa_(2)Cu_(3)O_(7-δ)thin films with Y_(2)BaCuO_(5)nanoinclusions

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Superconductivity 2024年第1期9卷 95-105页

作者： Alok K.Jha Kaname Matsumoto tomoya Horide Shrikant Saini Ataru Ichinose Paolo Mele Yutaka Yoshida Satoshi Awaji Department of Materials Science and Engineering Kyushu Institute of TechnologyTobata-kuKitakyushu 804-8550Japan Department of Mechanical and Control Engineering Kyushu Institute of TechnologyTobata-kuKitakyushu 804-8550Japan Central Research Institute of Electrical Power Industry YokosukaKanagawa 240-0196Japan College of Engineering-Innovative Global Program Shibaura Institute of TechnologyMinuma-kuSaitama 337-8570Japan Department of Energy Engineering and Science Nagoya UniversityChikusa-kuNagoya 464-8603Japan Institute for Materials Research Tohoku UniversityAoba-kuSendai 980-8577Japan

The pinning of quantized magnetic vortices in superconducting YBa_(2)Cu_(3)O_(7-δ)(YBCO or Y123)thin films with Y_(2)BaCuO_(5)(Y211)nanoinclusions have been investigated over wide temperature range(4.2-77 K).The concentration of Y211 nanoinclusions has been systematically varied inside YBCO thin films prepared by laser ablation technique using surface modified target *** pinning force density values(Fp∼0.5 TNm^(−3)at 4.2 K,9 T)have been observed for the YBCO film with moderate concentration of Y211 nanoinclusions(3.6 area%on ablation target).In addition,uniform enhancement in critical current density(J_(c))was observed in the angular dependent J_(c)measurement of YBCO+Y211 nanocomposite films.Y211 nanoinclusions have been found to be very efficient in pinning the quantized vortices thereby enhancing the in‐field J_(c)values over a wide range of *** the concentration of Y211 secondary phase into Y123 film matrix results into agglomeration of Y211 phase and observed as increased Y211 nanoparticle *** larger secondary phase nanoparticles are not as efficient pinning centers at lower temperatures as they are at higher temperatures due to substantial reduction of the coherence length at lower *** of the temperature dependence of J_(c)for YBCO+Y211 nanocomposite films has been conducted and possible vortex pinning mechanism in these nanocomposite films has been discussed.

关键词： YBCO thin film Critical current Vortex pinning Nanoscale APCs

External defects and severity level evaluation of potato using single and multispectral imaging in near infrared region Author links open overlay panel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Information Processing in Agriculture 2024年第1期11卷 80-90页

作者： Dimas Firmanda Al Riza Slamet Widodo Kazuya Yamamoto Kazunori Ninomiya Tetsuhito Suzuki Yuichi ogawa Naoshi Kondo Laboratory of Biosensing Engineering Graduate School of AgricultureKyoto UniversityKitashirakawaKyoto 6068267Japan Department of Biosystems Engineering Faculty of Agricultural TechnologyUniversitas BrawijayaJl.VeteranMalang 65145Indonesia Department of Mechanical and Biosystem Engineering Bogor Agricultural UniversityJl.Raya Darmaga Kampus IPB DarmagaBogor 16680Indonesia Technology Development Department Shibuya Seiki Co.Ltd.66Takaoka-choMatsuyamaEhime 7918036Japan

Non-invasive potato defects detection has been demanded for sorting and grading *** on the classification of the defects has been available,however,investigation on the severity level calculation is *** the detection of the common scab,it has been found that imaging in the infrared region provide an interesting characteristic that could distinguish defected area to normal ***,investigations on this wavelength range is interesting to add more knowledge and for *** this research,the multispectral image has been obtained and investigated especially at three wavelengths(950,1150,1600 nm).Image pre-processing and pseudo-color conversion techniques were explored to enhance the contrast between defects,normal background skin area and soil *** show that external defects,such as common scab and some mechanical damage types,appear brighter in the near infrared region,especially at 1600 nm against the normal skin *** has been found that pseudo-color images conversion provides more information regarding type if surface characteristics compared to grayscale single *** segmentation using pseudo-color images after multiplication operation pre-processing could be used for common scab and mechanical damage detection excluding soil deposits with a Dice Sorensen coefficient of *** addition,image segmentation using single image at 1600 nm shown relatively better results with Dice Sorensen coefficient of 0.72 with note that thick soil deposits will also be *** severity level evaluation had an R2 correlation of 0.84 against standard measurements of severity.

关键词： Multispectral imaging Pseudo-color Common scab External defects Near infrared

Accuracy and Utility of Vessel Analysis Using Non-Contrast CT for Planning Endovascular Aortic Repair

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Open Journal of Medical Imaging 2024年第3期14卷 96-105页

作者： Midori Komita-Moriya Yukihisa ogawa Akiyuki Kotoku Shintaro Nawata Kenji Kuramochi Yasuyoshi ogawa Kiyoshi Chiba Hiroshi Nishimaki Hidefumi Mimura Department of Radiology St. Marianna University School of Medicine Kanagawa Japan Department of Radiology Tokai University School of Medicine Hachioji Hospital Tokyo Japan Radiological Technology St. Marianna University School of Medicine Kanagawa Japan Department of Cardiovascular Surgery St. Marianna University School of Medicine Kanagawa Japan

Objectives: This study aimed to determine whether errors in vascular measurements would affect device selection in endovascular aortic repair (EVAR) by comparing measurements obtained using non-contrast computed tomography (NCT) with those obtained using contrast-enhanced CT (CECT). Materials and Methods: This single-center, retrospective study included 25 patients who underwent EVAR for abdominal aortic aneurysm at our institution. A 1-mm horizontal cross-sectional slice of NCT and CECT from each patient was retrospectively reviewed. The area from the abdominal aorta to the common iliac artery was divided into four zones. A centerline was created using the NCT by manually plotting the center points. Subsequently, the centerlines were automatically extracted and manually corrected during the arterial phase of CECT. The diameter and length of each zone were measured for each modality. The mean diameters and lengths of the target vessels were compared between NCT and CECT. Results: The measurements obtained using both methods were reproducible and demonstrated good agreement. The mean differences in vessel length and diameter measurements for each segment between NCT and CECT were not statistically significant, indicating good consistency. Conclusion: NCT may be useful for preoperative EVAR evaluation in patients with renal dysfunction or allergies to contrast agents.

关键词： Non-Contrast CT Vessel Analysis EVAR Contrast-Enhanced CT Abdominal Aortic Aneurysm

Preoperative albumin-bilirubin score and liver resection percentage determine postoperative liver regeneration after partial hepatectomy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2024年第14期30卷 2006-2017页

作者： Kazuhiro Takahashi Masahiko Gosho Yoshihiro Miyazaki Hiromitsu Nakahashi Osamu Shimomura Kinji Furuya Manami Doi Yohei Owada Koichi ogawa Yusuke Ohara Yoshimasa Akashi Tsuyoshi Enomoto Shinji Hashimoto Tatsuya Oda Department of Gastrointestinal and Hepatobiliary-Pancreatic Surgery University of TsukubaTsukuba 3058-575IbarakiJapan Department of Biostatistics University of TsukubaTsukuba 3058-575IbarakiJapan

BACKGROUND The success of liver resection relies on the ability of the remnant liver to *** of the knowledge regarding the pathophysiological basis of liver regeneration comes from rodent studies,and data on humans are ***,there is limited knowledge about the preoperative factors that influence postoperative *** To quantify postoperative remnant liver volume by the latest volumetric software and investigate perioperative factors that affect posthepatectomy liver *** A total of 268 patients who received partial hepatectomy were *** were grouped into right hepatectomy/trisegmentectomy(RH/Tri),left hepa-tectomy(LH),segmentectomy(Seg),and subsegmentectomy/nonanatomical hepatectomy(Sub/Non)*** regeneration index(RI)and late rege-neration rate were defined as(postoperative liver volume)/[total functional liver volume(TFLV)]×100 and(RI at 6-months-RI at 3-months)/RI at 6-months,*** lower 25th percentile of RI and the higher 25th percentile of late regeneration rate in each group were defined as“low regeneration”and“delayed regeneration”.“Restoration to the original size”was defined as regeneration of the liver volume by more than 90%of the TFLV at 12 months *** The numbers of patients in the RH/Tri,LH,Seg,and Sub/Non groups were 41,53,99 and 75,*** RI plateaued at 3 months in the LH,Seg,and Sub/Non groups,whereas the RI increased until 12 months in the RH/Tri *** to our multivariate analysis,the preoperative albumin-bilirubin(ALBI)score was an independent factor for low regeneration at 3 months[odds ratio(OR)95%CI=2.80(1.17-6.69),P=0.02;per 1.0 up]and 12 months[OR=2.27(1.01-5.09),P=0.04;per 1.0 up].Multivariate analysis revealed that only liver resection percentage[OR=1.03(1.00-1.05),P=0.04]was associated with delayed ***,multivariate analysis demonstrated that the preoperative ALBI score[OR=2.63(1.00-1.05),P=0.02;per 1.

关键词： Liver regeneration Albumin-bilirubin score Liver resection percentage Partial hepatectomy Human Regeneration index

Effects of catalyst loading amount on the synthesis of poly（3-hexylthiophene） via externally initiated Kumada catalyst-transfer polycondensation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Materials Science 2014年第4期8卷 383-390页

作者： Jin WANG tomoya HIGASHIHARA Advanced Materials Division Suzhou Institute of Nano-Tech and Nano-Bionics Chinese Academy of Sciences 398 Ruoshui Road Suzhou 215123 China Department of Polymer Science and Engineering Faculty of Engineering Yamagata University 4-3-16 Jonan Yonezawa City Yamaqata 992-8510 Japan Japan Science and Technology Agency (JST) 4-1-8 Honcho Kawaguchi Saitama 332-0012 Japan

A series of model polymerization are carried out via the one-pot externally initiated Kumada catalyst-transfer polycondensation （KCTP） of 2-bromo-5-chloromagne- slum thiophene monomers, and the excess amount of initiators or catalysts are found no need to be isolated during the polycondensation process. Especially, the impacts of the nickel catalyst loading variation on regioregularity （rr）, yield, molecular weight （Mn）, polydispersity （PDI） and initiation efficiency of poly（3-hexylthiophene）（P3HT） are systematically investigated. The IH NMR, size-exclusion chromatography （SEC）, and MALDI-TOF mass spectroscopy results indicated that an excess amount of catalyst does not influence yield, rr, Mn, and PDI of P3HT, nor the initiation efficiency. However, the PDI of the product is broad, and the Mn and rr values decreased in the absence of 1,3-bis （diphenylphosphino）propane （dppp）. It can be concluded that the in-situ KCTP polymerization of P3HT is a practical and effective process. These results are especially valuable for the synthesis of all-conjugated block copolymers where macroinitiators are used.

关键词： Kumada catalyst-transfer polycondensation (KCTP) poly(3-hexylthio-phene) (P3HT) regioregularity (rr)

Estimations of the Maximum Tangential Velocity V_(θm) in the Vortex Core Region and also the Mean Rotational Velocity V_(oi) near the Concave Wall Surface in the Returned Flow Type Cyclone Dust Collector

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2010年第6期19卷 553-560页

作者： Akira ogawa T 110-0011. Minowa 2-14-7 Taitou-Ku Tokyo Japan

There are many types of cyclone dust collectors for separating the fine solid and dust particles from gases in the various industries and also in the home used purposes. For estimating the power loss and the collection efficiency, one of the most important factors is the maximum tangential velocity V0m in the vortex core region in the cyclone body. In order to determine V0~ by the simple method, it is useful to apply the mechanical balance of the angular momentum fluxes under the assumption of ogawa combined vortex model which is composed of the quasi-forced vortex in the vortex core region and also the quasi-free vortex surrounded the vortex core region and also under the assumption of the introduction of equivalent length Heq corresponding to the cone spaces of the cyclone body and the dust bunker. On the other hand, the mean rotational velocity Voi near the concave wall surface is also estimated by the mechanical balance of angular momentum fluxes with the moment of viscous friction force. For confirming the general applications of the obtained equations, the returned flow types cyclones changed the throat diameter D3 are designed. The material of the cyclone is the transparent acrylic resin. Therefore the inner surface of the cyclone body can be regarded as smooth surface. The comparisons of the measured velocities V~ and Voi by a cylindrical Pitot tube are shown in good agreement with those of the proposed equations. The above stated results are described in detail.

关键词： Cyclone Dust Collector Maximum Tangential Velocity Mean Rotational Velocity Angular Momentum Flux Equivalent Length Surface Frictional Force ogawa Combined Vortex Model Reynolds Number.