检索结果-南通市图书馆

Numerical Simulation of Sloshing in Rectangular Storage Tank Using Coupled FEM-BEM

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Marine Science and Application 2012年第4期11卷 417-426页

作者： Hassan Saghi mohammad javad ketabdari Department of Civil Engineering Ferdowsi University Mashhad 91779-48974 Iran Faculty of Marine Technology Amirkabir University of Technology Tehran 15875-4413 Iran

Sloshing of liquid can increase the dynamic pressure on the storage sidewalls and bottom in tanker ships and LNG careers. Different geometric shapes were suggested for storage tank to minimize the sloshing pressure on tank perimeter. In this research, a numerical code was developed to model liquid sloshing in a rectangular partially filled tank. Assuming the fluid to be inviscid, Laplace equation and nonlinear free surface boundary conditions are solved using coupled FEM-BEM. The code performance for sloshing modeling is validated against available data. To minimize the sloshing pressure on tank perimeter, rectangular tanks with specific volumes and different aspect ratios were investigated and the best aspect ratios were suggested. The results showed that the rectangular tank with suggested aspect ratios, not only has a maximum surrounded tank volume to the constant available volume, but also reduces the sloshing pressure efficiently.

关键词： rectangular storage tank sloshing phenomenon aspect ratio coupled FEM-BEM

3D Numerical Modeling of Wave Forces on Tandem Fixed Cylinders Using the BEM

在线全文

学校读者我要写书评

暂无评论

Journal of Marine Science and Application 2013年第3期12卷 279-285页

作者： mohammad javad ketabdari mohammad Mahdi Abaiee Ali Ahmadi Faculty of Marine Technology Amirkabir University of TechnologyTehran 15875-4413 Iran Department of Mechanics Sharif University of TechnologyTehran 145888-9694 Iran

In this paper a 3D numerical model was developed to study the complicated interaction between waves and a set of tandem fixed *** fluid was considered to be inviscid and ***,the Helmholtz equation was used as a governing *** boundary element method（BEM） was adopted to discretize the relevant *** boundaries were used in far fields of the study *** waves were generated and propagated towards tandem fixed cylinders to estimate the forces applied on *** attention was paid to consideration of the effect on varying non-dimensional cylinder radius and distance between cylinders,ka and kd on forces and trapped *** middle cylinder wave forces and trapped modes in a set of nine tandem cylinders were validated utilizing analytical *** comparisons confirm the accuracy of the *** results of the inline wave force estimation on n tandem cylinders show that the critical cylinder in the row is the middle one for odd numbers of *** the results show that the critical trapped mode effect occurs for normalized cylinder radiuses close to 0.5 and *** the force estimation for n tandem cylinders confirms that force amplitude of the middle cylinder versus normalized separation distance fluctuates about that of a single cylinder.

关键词： tandem cylinders boundary element method(BEM) wave force diffraction trapped mode Henkel function

Epistemic-Based Investigation of the Probability of Hazard Scenarios Using Bayesian Network for the Lifting Operation of Floating Objects

在线全文

学校读者我要写书评

暂无评论

Journal of Marine Science and Application 2016年第3期15卷 250-259页

作者： Ahmad Bahoo Toroody mohammad Mahdi Abaiee Reza Gholamnia mohammad javad ketabdari Faculty of Engineering Kar Higher Education Institute of Qazvin Qazvin *** Iran Faculty of Marine Technology Amirkabir University of Technology Tehran Tehran 15875-4413 Iran Faculty of Health Safety and Environment Shahid Beheshti University of Medical Science Tehran 19395 Iran

Owing to the increase in unprecedented accidents with new root causes in almost all operational areas, the importance of risk management has dramatically risen. Risk assessment, one of the most significant aspects of risk management, has a substantial impact on the system-safety level of organizations, industries, and operations. If the causes of all kinds of failure and the interactions between them are considered, effective risk assessment can be highly accurate. A combination of traditional risk assessment approaches and modern scientific probability methods can help in realizing better quantitative risk assessment methods. Most researchers face the problem of minimal field data with respect to the probability and frequency of each failure. Because of this limitation in the availability of epistemic knowledge, it is important to conduct epistemic estimations by applying the Bayesian theory for identifying plausible outcomes. In this paper, we propose an algorithm and demonstrate its application in a case study for a light-weight lifting operation in the Persian Gulf of Iran. First, we identify potential accident scenarios and present them in an event tree format. Next, excluding human error, we use the event tree to roughly estimate the prior probability of other hazard-promoting factors using a minimal amount of field data. We then use the Success Likelihood Index Method(SLIM) to calculate the probability of human error. On the basis of the proposed event tree, we use the Bayesian network of the provided scenarios to compensate for the lack of data. Finally, we determine the resulting probability of each event based on its evidence in the epistemic estimation format by building on two Bayesian network types: the probability of hazard promotion factors and the Bayesian theory. The study results indicate that despite the lack of available information on the operation of floating objects, a satisfactory result can be achieved using epistemic data.

关键词： epistemic estimation Bayesian theory light-weight lifting success likelihood index method(SLIM) event tree(ET) Bayesian network

Suspended particulate matter promotes epithelial-to-mesenchymal transition in alveolar epithelial cells via TGF-β1-mediated ROS/IL-8/SMAD3 axis

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第7期141卷 139-150页

作者： Shahrzad Molavinia Dian Dayer mohammad javad Khodayar Gholamreza Goudarzi Maryam Salehcheh Cellular and Molecular Research Center Medical Basic Sciences Research InstituteAhvaz Jundishapur University of Medical SciencesAhvazIran Department of Toxicology School of PharmacyAhvaz Jundishapur University of Medical SciencesAhvazIran Student Research Committee Ahvaz Jundishapur University of Medical SciencesAhvazIran Toxicology Research Center Medical Basic Sciences Research InstituteAhvaz Jundishapur University of Medical SciencesAhvazIran Air Pollution and Respiratory Diseases Research Center Ahvaz Jundishapur University of Medical SciencesAhvazIran Iranian Scientific Association of Clean Air TehranIran

Epidemiological evidence presents that dust storms are related to respiratory diseases,such as pulmonary fibrosis(PF).However,the precise underlying mechanisms of SPM-elicited adverse effects still need to be ***-mesenchymal transition(EMT)process is a characteristic of *** discussed whether suspended particulate matter(SPM)is involved in EMT induction via transforming growth factor-β1(TGF-β1).In this study,a detailed elemental analysis(55 elements),particle size,and morphology were *** investigate the toxicity of SPM,an MTT test was performed to detect cell ***,A549cells were exposed to selected concentrations of SPM(20 and 40μg/mL)for single and repeated *** DCFH-DA assay showed that exposure to SPM could produce reactive oxygen species(ROS).The ELISA assay demonstrated increased levels of interleukin-8(IL-8)and TGF-β1 in the *** blot was used to detect the expression of proteins associated with EMT and the SMAD3-dependent *** of western blot demonstrated that E-cadherin was reduced,whereas p-SMAD3,vimentin,andα-smooth muscle actin were *** findings indicated that SPM triggered EMT by induction of oxidative stress,inflammation,and the TGF-β1/SMAD3 pathway activation.

关键词： Particulate matter TGF-β1 Oxidative stress Epithelial-mesenchymal transition Pulmonary fibrosis Cells

Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2025-2036页

作者： mohammad javad Sohrabi Hamed Mirzadeh Saeed Sadeghpour Abdol Reza Geranmayeh Reza Mahmudi School of Metallurgy and Materials Engineering College of EngineeringUniversity of Tehran14395-515TehranIran Centre for Advanced Steels Research Materials and Mechanical EngineeringUniversity of Oulu90014 OuluFinland

In the present work,plastic deformation mechanisms were initially tailored by adjusting the deformation temperature in the range of 0 to 200℃ in AISI 304L austenitic stainless steel,aiming to optimize the strength-ductility *** was shown that the combined twinning-induced plasticity(TWIP)/transformation-induced plasticity(TRIP)effects and a wider strain range for the TRIP effect up to higher strains by adjusting the deformation temperature are good strategies to improve the strength-ductility synergy of this metastable stainless *** this regard,by consideration of the observed temperature-dependency of plastic deformation,the controlled sequence of TWIP and TRIP effects for archiving superior strength-ductility trade-off was intended by the pre-designed temperature jump tensile ***,the optimum tensile toughness of 846 MJ/m^(3) and total elongation to 133% were obtained by this strategy via exploiting the advantages of the TWIP effect at 100℃ and the TRIP effect at 25℃ at the later stages of the ***,a deformation-temperature-transformation(DTT)diagram was developed for this metastable ***,based on work-hardening analysis,it was found that the main phenomenon constraining further improvement in the ductility and strengthening was the yielding of the deformation-induced α′-martensite.

关键词： metastable stainless steels transformation-induced plasticity twinning-induced plasticity stacking fault energy mechanical properties

Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2182-2188页

作者： mohammad javad Sohrabi Hamed Mirzadeh Saeed Sadeghpour Milad Zolfipour Aghdam Abdol Reza Geranmayeh Reza Mahmudi School of Metallurgy and Materials Engineering College of EngineeringUniversity of Tehran14395-515 TehranIran Centre for Advanced Steels Research Materials and Mechanical EngineeringUniversity of Oulu90014 OuluFinland Department of Mechanical Engineering College of EngineeringUniversity of Tehran14395-515 TehranIran

The effects of deformation temperature on the transformation-induced plasticity(TRIP)-aided 304L,twinning-induced plasti-city(TWIP)-assisted 316L,and highly alloyed stable 904L austenitic stainless steels were compared for the first time to tune the mechan-ical properties,strengthening mechanisms,and strength-ductility *** this purpose,the scanning electron microscopy(SEM),electron backscattered diffraction(EBSD),X-ray diffraction(XRD),tensile testing,work-hardening analysis,and thermodynamics calcu-lations were *** induced plasticity effects led to a high temperature-dependency of work-hardening behavior in the 304L and 316L stainless *** the deformation temperature increased,the metastable 304L stainless steel showed the sequence of TRIP,TWIP,and weakening of the induced plasticity mechanism;while the disappearance of the TWIP effect in the 316L stainless steel was also ***,the solid-solution strengthening in the 904L superaustenitic stainless steel maintained the tensile properties over a wide temper-ature range,surpassing the performance of 304L and 316L stainless *** this regard,the dependency of the total elongation on the de-formation temperature was less pronounced for the 904L alloy due to the absence of additional plasticity *** results re-vealed the importance of solid-solution strengthening and the associated high friction stress for superior mechanical behavior over a wide temperature range.

关键词： austenitic stainless steels mechanical behavior stacking fault energy metastability mechanical twinning

Modeling functional brain connections in methamphetamine and opioid abusers

在线全文

学校读者我要写书评

暂无评论

Medicine in Novel Technology and Devices 2024年第1期21卷 88-96页

作者： Nasimeh Marvi javad Haddadnia mohammad Reza Fayyazi Bordbar Hakim Sabzevari University SabzevarIran Psychiatry and Behavioral Sciences Research Center Mashhad University of Medical SciencesMashhadIran

Substance abuse has become a significant problem *** primary purpose of this study was to model the functional brain connectivity in methamphetamines(Meth)and opioids(Op)groups in comparison with the healthy control(HC)*** data were recorded in Meth(n=8),Op(n=12),and HC groups(n=12)in a closed-eye resting *** NeuCube model based on a spiking neural network was used for EEG data's functional brain connectivity *** NeuCube model was evaluated quantitatively and qualitatively with model descriptive *** results showed the average value of the neuron's activation level,spikes emitted from neurons,and clustering coefficient as a communication parameter in the HC group decreased from 1154,1103,0.026 to 1036,981,0.020 in the Op group and to 511,468,0.009 in the Meth group,*** changes in indices were significant according to the ANOVA test with p〈*** decrease in indices was more significant in the Meth group than in the Op *** research findings showed that the abuse of Meth and Op causes damage to the brain's functional *** damage included shortening and limiting communication routes and decreased neurons'ability to generate membrane potential and emit inhibitory and excitatory *** were reported to be more severe in the Meth group than in the Op group.

关键词： Electroencephalogram Methamphetamines NeuCube model Opioids Spiking neural networks

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

未热解厚热障涂层的隔热能力和黏接强度

Transactions of Nonferrous Metals Society of China 2024年第4期34卷 1226-1236页

作者： mohammad IZADINIA Reza SOLTANI Mahmoud HEYDARZADEH SOHI javad MOSTAGHIMI School of Metallurgy and Materials Engineering College of EngineeringUniversity of TehranTehranIran Centre for Advanced Coating Technologies Department of Mechanical and Industrial EngineeringUniversity of TorontoTorontoOntarioCanada

对比研究使用未热解粉末制备的厚热障涂层(UPTTBC)和传统TBC、厚TBC(TTBC)及密集垂直裂纹(DVC)TTBC 4种涂层的隔热能力和黏接强度。采用降温法测试涂层的隔热能力;根据ASTM C633标准,采用拉拔试验检测涂层的黏接强度。结果显示,UPTTBC和... 详细信息

对比研究使用未热解粉末制备的厚热障涂层(UPTTBC)和传统TBC、厚TBC(TTBC)及密集垂直裂纹(DVC)TTBC 4种涂层的隔热能力和黏接强度。采用降温法测试涂层的隔热能力;根据ASTM C633标准,采用拉拔试验检测涂层的黏接强度。结果显示,UPTTBC和DVC TTBC的黏接强度分别比TTBC高35%和25%。这可能是由于UPTTBC结构中存在亚微米尺度的未熔化区域,起到了阻止裂纹扩展的作用。此外,隔热测试的结果表明,DVCTTBC涂层的隔热能力最差,为0.28℃/μm,而UPTTBC涂层的隔热能力最强,为0.40℃/μm。由于UPTTBCs显微组织中存在亚微米区域,使涂层展现出优越的隔热能力。相反,DVCTTBC因其致密的结构,具有最低的隔热能力。

关键词：厚热障涂层密集垂直裂纹热障涂层未热解粉末黏接强度隔热能力

同方期刊数据库

From Entry to Evasion:A Comprehensive Analysis of Host-Virus Interactions for Monkeypox

在线全文

学校读者我要写书评

暂无评论

Infectious Microbes & Diseases 2024年第2期6卷 56-64页

作者： Vahideh Hamidi Sofiani mohammad Rezaei Zadeh Rukerd javad Charostad mohammad Pardeshenas Reza Ghazi Nasir Arefinia Sara Shafieipour Faranak Salajegheh Mohsen Nakhaie Department of Microbiology Golestan University of Medical SciencesGorganIran Gastroenterology and Hepatology Research Center Institute of Basic and Clinical Physiology SciencesKerman University of Medical SciencesKermanIran Universal Scientific Education and Research Network(USERN) TehranIran Department of Microbiology Faculty of MedicineShahid Sadoughi University of Medical SciencesYazdIran Department of Microbiology School of MedicineKerman University of Medical SciencesKermanIran Department of Biotechnology Golestan University of Medical SciencesGorganIran Student Research Committee Jiroft University of Medical SciencesJiroftIran Physiology Research Center Institute of NeuropharmacologyKerman University of Medical SciencesKermanIran Clinical Research Development Unit School of MedicineAfzalipour HospitalKerman University of Medical SciencesKermanIran

Monkeypox(Mpox)has posed a novel challenge and emerged as a threat to global public health since the onset of its outbreak in *** is spreading throughout the world in both endemic and non-endemic countries,indicating that its behavior is *** prevalence of Mpox and the risk of a global pandemic necessitate a better understanding of Mpox virus replications and interactions with the ***,we attempted to provide a detailed comprehensive review of Mpox virus behavior at the molecular level from the entry level to the establishment of a successful infection,including attachment and entry,DNA replication,protein expression and viron assembly and *** review also describes its strategies to evade host immune responses and inhibit apoptosis,and uncovers underlying molecular mechanisms such as subverted signaling pathways and cellular factors behind host-viral interactions.

关键词： monkeypox immunity apoptosis virus-host interaction