检索结果-南通市图书馆

Critical review of superplastic magnesium alloys with emphasis on tensile elongation behavior and deformation mechanisms

引用

journal of Magnesium and Alloys 2022年第5期10卷 1133-1153页

作者： H.T.jeong W.j.kim Department of Materials Science and Engineering Hongik UniversitySangsu-dong 72-1 Mapo-guSeoul 121-791South Korea

The tensile elongation behavior and deformation mechanisms of superplastic Mg alloys and Mg composites were examined by extensively reviewing the literature published from the time of the first report on the superplasticity of Mg alloys to the present *** on the superplasticity of Mg alloys have been conducted mainly on Mg-Al-Zn(AZ)series alloys,Mg-Zn-Zr(ZK),Mg-Li and Mg-RE(rare earth)alloys,and in recent years,Mg-RE alloys have attracted the greatest *** effect of grain size and the type and amount of secondary phase particles on the superplasticity of Mg alloys was systematically examined and *** alloys processed by severe plastic deformation(SPD)and powder-metallurgy methods have smaller grain sizes and exhibit superior superplasticity compared to conventionally processed(by extrusion and rolling)Mg *** the AZ alloys,as the volume fraction of the Mg17Al12phase increases,smaller grains are obtained,and the low-temperature superplasticity(LTS)and high-strain-rate superplasticity(HSRS)characteristics become *** ZK60 alloy with finely dispersed Mg Zn2particles exhibits excellent LTS,while the Mg-RE alloys with a high fraction of thermally stable particles exhibit excellent ***-Li alloys can exhibit LTS even at room temperature due to the presence of a high-volume fraction of the body centered cubic(BCC)phase where atomic diffusivity is *** boundary diffusion-and lattice diffusion-controlled grain boundary sliding are found to operate as the dominant deformation mechanisms below~473 K and above~673 K,respectively,at small grain *** mechanism maps were constructed based on the analysis of the deformation behavior of superplastic Mg alloys,and from the maps,the critical conditions for achieving LTS,HSRS and simultaneous achievement of LTS and HRSR were calculated and proposed,and their importance was discussed.

关键词： Magnesium alloys Superplastic Grain size Secondary phase Grain boundary sliding

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of refinement of grains and icosahedral phase on hot compressive deformation and processing maps of Mg-Zn-Y magnesium alloys with different volume fractions of icosahedral phase

引用

journal of Materials Science & Technology 2019年第1期35卷 181-191页

作者： T.Y.Kwak W.j.kim Department of Materials Science and Engineering Hongik University

The effect of the volume fraction of I-phase on the hot compressive behavior and processing maps of the extruded Mg-Zn-Y alloys was examined, and the obtained results were compared with those of the cast alloys in a previous work. The average grain sizes, fractions of dynamically recrystallized(DRXed) grains,and sizes of DRXed grains of the extruded alloys after compressive deformation were significantly smaller,higher and smaller, respectively, than those of the cast alloys after compressive deformation under the same experimental conditions. This was because the microstructures of the extruded alloys, having much more grain boundaries and more refined I-phase particles than the cast alloys, provided a larger number of nucleation sites for dynamic recrystallization than those of the cast alloys. The constitutive equations for high-temperature deformation of the extruded and cast alloys could be derived using the same activation energy for plastic flow, which was close to the activation energy for lattice diffusion in *** with the cast alloys, the onset of the power law breakdown(PLB) occurred at larger ZenerHolloman(Z) parameter values in the extruded alloys. This was because the extruded alloys had finer initial grain sizes and higher fractions of finer DRXed grains compared to the cast alloys, such that the onset of PLB caused by creation of excessive concentrations of deformation-induced vacancies was delayed to a higher strain rate and a lower temperature. The flow-stress difference between the extruded alloys and the cast alloys could be attributed to the difference in the fraction of DRXed grains. According to the processing maps, the extruded alloys exhibited higher power dissipation efficiency and flow stability than the cast alloys. This agreed with the microstructural observations.

关键词： Hot compression Magnesium alloy Processing map Grain refinement Dynamic recrystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The hot compressive deformation behavior of cast Mg-Gd-Y-Zn-Zr alloys with and without LPSO phase in their initial microstructures

引用

journal of Magnesium and Alloys 2022年第10期10卷 2901-2917页

作者： H.T.jeong W.j.kim Departmentof Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

Samples of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy with and without an intragranular lamellae-shaped long period stacking ordered(LPSO)phase were prepared through heat treatment and a series of hot compression tests on these materials were conducted to examine and evaluate the influence of LPSO on the hot compressive deformation behavior and deformation mechanisms at a given alloy *** values of activation energy for plastic flow(Qc)of the solution treated(without LPSO phase)and annealed alloys(with intragranular LPSO phase)were larger than that for pure Mg,indicating that the presence of a high amount of rare earth(RE)elements and LPSO in the Mg matrix significantly increases *** Qcvalue of the annealed alloy was larger than that of the solution treated alloy at all the strain levels(223.3 vs.195.5 k j/mol in average)and the largest difference in Qcbetween the two alloys was recorded at the smallest strain of 0.1 where precipitation of LPSO during deformation was limited in the solution treated *** observations imply that the formation of LPSO phase out of the RE-rich solid solution matrix during deformation increases Qc,but the increment is not so *** of the hot compressive data of the alloys with LPSO phase and the alloys with RE-rich solid solution matrix in literatures indicates the similarity of the effect of the LPSO and RE-rich solid solution matrix phases on Qcand high-temperature strength.

关键词： Magnesium alloys LPSO Deformation mechanism Dynamic recrystallization Activation energy for plastic flow Processing maps

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Superplastic behavior of an ultrafine-grained Mg-13Zn-1.55Y alloy with a high volume fraction of icosahedral phases prepared by high-ratio differential speed rolling

引用

journal of Materials Science & Technology 2017年第9期33卷 919-925页

作者： T.Y.Kwak W.j.kim Rare Metal R&BD Group Korea Institute of Industrial Technology Department of Materials Science and Engineering Hongik University

An ultrafine-grained（UFG） Mg-13Zn-1.55 Y alloy（ZW132） with a high volume fraction（7.4%） of icosahedral phase（I-phase, Mg;Zn;Y） particles was prepared by applying high-ratio differential speed rolling（HRDSR） on the cast microstructure following homogenization. The alloy exhibited excellent superplasticity at low temperatures(tensile elongations of 455% and 1021% 473 K-10;s;and 523 K-10;s;,respectively). Compared with UFG Mg-9.25Zn-1.66 Y alloy（ZW92） with a lower volume fraction of I-phase particles（4.1%）, which was prepared using the same processing routes, the UFG ZW132 alloy exhibited a higher thermal stability of grain size. Rapid grain coarsening, however, occurred at temperatures beyond523 K, leading to a loss of superplasticity. The high-temperature deformation behavior of the HRDSRprocessed ZW132 alloy could be well described assuming that the mechanisms of grain boundary sliding and dislocation climb creep competed with each other and considering that the grain-size was largely increased by accelerated grain growth at the temperatures beyond 523 K.

关键词： Magnesium alloy Superplastic deformation Ultrafine grain Icosahedral quasicrystal Grain growth

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

应用剪切波离散成像斜率值预测移植肾急性排异反应

引用

国际医学放射学杂志 2024年第5期 620-621页

作者： T.M.kim H.Ahn j.Y.Cho A.Han S.I .Min j.Ha 郑永利

目的评价剪切波离散成像斜率值预测移植肾功能不全的价值。方法回顾性分析2022年11月—2023年2月期间行肾移植的128例受试者资料[中位年龄，55(43～62)

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

New para-magnetic(CoFeNi)(50)(CrMo)(50-x)(CB)x(x=20,25,30)non-equiatomic high entropy metallic glasses with wide supercooled liquid region and excellent mechanical properties

引用

journal of Materials Science & Technology 2020年第8期36卷 135-143页

作者： jeong Tae kim Sung Hwan Hong jin Man Park jürgen Eckert Ki Buem kim Erich Schmid Institute of Materials Science Austrian Academy of Sciences(ÖAW)Jahnstrae 128700LeobenAustria Hybrid Materials Center(HMC) Department of Nanotechnology and Advanced Materials EngineeringSejong University209Neungdong-roGwangjin-guSeoul143-747Republic of Korea Global Technology Center(GTC) Samsung Electronics Co.Ltd129 Samsung-roYeongtong-guSuwonsiGyeonggi-do443-742Republic of Korea Department of Materials Science Chair of Materials PhysicsMontanuniversität LeobenJahnstraße 128700LeobenAustria

In this study,high entropy metallic glasses(HEMGs)were developed through a combination of concepts for designing metallic glasses(main element+transition metal+metalloid element)and high-entropy alloys(more than five elements,each element having an atomic concentration between 5 at.%and 35 at.%).The developed metallic glass alloys are composed of Co-Fe-Ni main elements,transition metals(Cr,Mo)and metalloid elements(C,B).Moreover,the present work reports the thermal,mechanical and magnetic properties of(CoFeNi)(50)(CrMo)(50-x)(CB)x alloys with x=20,25,*** developed as-spun HEMGs exhibit typical paramagnetic properties even for a high amount of ferromagnetic elements(Co,Fe,and Ni)and have high elastic modulus(103–160 GPa)and hardness(14–27 GPa),thus possessing mechanical properties similar to well-known Co-based metallic glasses(Co-Cr-Mo-C-B system).In addition,some of the bulk samples prepared with a diameter of 2 mm form bulk metallic glasses with a high compressive strength around 3.5 *** mechanisms determining the stability of the supercooled liquid,as well as the paramagnetic and mechanical properties for the developed non-equiatomic HEMGs,are discussed.

关键词： Metallic glasses Paramagnetism High entropy alloys Phase stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mg-Al Alloys Manufactured by Casting and Hot Working Process

引用

journal of Materials Science & Technology 2008年第1期24卷 96-98页

作者： j.M.kim j.H.jun W.j.jung Department of Applied Materials Eng. Hanbat National University Daejeon 305-719 Korea Light Materials Team Korea Institute of Industrial Technology Incheon 406-800 Korea

Mechanical properties of Mg-Al based alloys at different fabrication state,namely as-cast,hot rolled,and annealed,were investigated to develop the alloys that are suitable for the casting/hot working ***- imental results indicated that the castability such as hot cracking resistance tends to improve with increasing the aluminum ***,the elongation at elevated temperatures was observed to decrease as the AI content increases,implying difficulties in hot forming.A small amount of Zr additions could significantly enhance the room temperature mechanical properties of hot-rolled Mg-6%Al-1%Zn *** tendency of remarkable grain coarsening at high temperatures was effectively reduced by the Zr *** analyses suggested that very fine Al-3Zr precipitates formed in the Zr-added alloy are responsible for the obtained results.

关键词： Magnesium Casting Forming Tensile properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

用于诊断肝细胞癌的肝脏影像报告及数据系统2018版5类：一项最新Meta分析

引用

国际医学放射学杂志 2024年第3期 373-374页

作者： S.Lee Y.Y.kim j.Shin Y.H.Roh j.Y.Choi V.Chernyak 吴玉平

摘要目的该项更新的Meta分析旨在确定使用肝脏影像报告和数据系统（LI-RADS）2018版本（v2018）的LI-RADS LR-5类对肝细胞癌（HCC）的诊断能力，并通过评估成像方

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The Gas-to-Dust Relation in the Dark Cloud L1523-Observational Evidence for CO Gas Depletion

引用

Chinese journal of Astronomy and Astrophysics 2008年第6期8卷 686-692页

作者： H.G.kim B.G.kim j.H.jung Korea Astronomy and Space Science Institute 61-1 Hwaam Yuseong Daejeon 305-348 Korea

Correlation between gas and dust column density has been studied for the dark globule L1523. The 13CO（j=1→0） emission is used for tracing the gas, and the IR emissions, for tracing the dust constituent. In order to match the beam resolution between the images, a beam de-convolution algorithm based on the Maximum Correlation Method （MCM） was applied on the Infrared Astronomical Satellite （IRAS） data. The morphology of 13CO column density map shows a close correlation to that of 100μm dust optical depth. The distribution of the optical depth at 100 μm follows that of gas column density more closely than does the flux map at either 60 or 100μm. The ratio of the 13CO column density to the 100μm optical depth shows a decreasing trend with increasing dust optical depth in the central part, indicating possible molecular gas condensation onto dust particles. The excessive decrease in the CO column density in the envelope may most probably be due to the photo-dissociation of CO molecules.

关键词： ISM: clouds ISM: dust ISM: molecules

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mending the broken in amyotrophic lateral sclerosis: DNA damage and repair in motor neuron degeneration

引用

Neural Regeneration Research 2021年第1期16卷 104-105页

作者： Byung Woo kim Lee j.Martin Department of Pathology Division of Neuropathologythe Pathobiology Graduate Training ProgramJohns Hopkins University School of MedicineBaltimoreMDUSA Department of Neuroscience Johns Hopkins University School of MedicineBaltimoreMDUSA

Amyotrophic lateral sclerosis(ALS)is a fatal neurodegenerative disease that causes paralysis and respiratory failure(Petrov et al.,2017).The driving mechanisms are unknown,and there are no effective treatments(Petrov et al.,2017).Aging and a few gene mutations,a common one being missense mutations in superoxide dismutase-1(SOD1),are risk factors for ALS(Figure 1).The recent Food and Drug Administration approval of edaravone for the treatment of ALS putatively supports a role for oxidative and nitrative stresses in the disease processes(Figure 1A).DNA damage,abnormalities in DNA repair,and other nuclear abnormalities are implicated also in the pathogenesis of human ALS(Bradley and Krasin,1982;kim et al.,2020).

关键词： al. damage degeneration

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：