检索结果-南通市图书馆

Immunopotentiality of Ayurvedic polyherbal formulations “Saribadi” and “Anantamul Salsa” with augmentation of IgM production and lymphocytes proliferation:A preliminary study

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Asian Pacific Journal of Tropical Biomedicine 2016年第7期6卷 568-573页

作者： md.moklesur rahman Sarker Long Chiau Ming md.Zaidul Islam Sarker M Shahabuddin Kabir Choudhuri Department of Immunochemistry Division of Pharmaceutical SciencesOkayama University Graduate School of MedicineDentistry and Pharmaceutical Sciences Department of Pharmacology Faculty of PharmacyLincoln University College Faculty of Pharmacy Brain Degeneration and Therapeutics GroupPharmaceutical and Life Sciences Co Re Universiti Teknologi MARA Department of Pharmaceutical Technology Faculty of PharmacyInternational Islamic University Malaysia Department of Pharmacy Faculty of Biological ScienceJahangirnagar University

Objective:To assess the immunopotentiality of Ayurvedic polyherbal preparations,"Saribadi" and "Anantamul Salsa".Methods: Freshly prepared BALB/c mice splenocytes were cultured with "Saribadi" or"Anantamul Salsa" treatment [doses of 0.25%, 0.50%, 0.75%, 1.00%, 1.50%, 2.00%,3.00% and 4.00%(v/v)] at 37C for 5 days. The immunoglobulin M(IgM) production and lymphocytes proliferation were determined by ELISA and MTT methods, *** contamination was assessed by treating the preparations with polymyxin ***: The doses of "Saribadi" [0.25%, 0.50%, 0.75% and 1.00%(v/v)] significantly increased IgM productions(0.966, 0.728, 0.695 and 0.615 mg/m L vs. control 0.265 mg/m L)and lymphocytes proliferation [absorbance 0.311, 0.394, 0.372 and 0.334 optical density(OD) vs. control 0.162 OD]. Similarly, the doses of "Anantamul Salsa" [0.50%, 0.75%,1.00% and 1.50%(v/v)] promoted IgM productions(0.933, 0.919, 0.917 and 0.892 mg/m L vs. control 0.502 mg/m L) and the doses of "Anantamul Salsa" [0.50%, 0.75%, 1.00%,1.50%, 2.00%, and 3.00%(v/v)] stimulated lymphocytes proliferation(absorbance 0.395,0.326, 0.440, 0.398, 0.452 and 0.355 OD vs. control 0.199 OD). The activity of "Saribadi"and "Anantamul Salsa" was not retarded by the treatment of preparations with polymyxin ***: Immunomodulatory activity of "Saribadi" and "Anantamul Salsa" was unveiled for the first time. "Saribadi" and "Anantamul Salsa" possess immunostimulating potential acting through the induction of lymphocyte proliferation and IgM *** preparations may be useful in strengthening immune responses. However, further cellular and in vivo studies are required.

关键词： "Saribadi" "Anantamul Salsa" Ayurvedic medicine Immunostimulant Lymphocytes Splenocytes Immunoglobulin M antibody Proliferation Differentiation

Capturing transition and non-transition flows with a new shear stress transport model

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2023年第3期36卷 121-136页

作者： md Mizanur rahman School of Mechanical Engineering Hangzhou Dianzi UniversityHangzhou 310018China

A new Shear Stress Transport(SST)k-ω model is devised to integrate salient features of both the non-transitional SST k-ω model and correlation-based γ-Re_(θ) transition *** exceptionally simplified approach is applied to extend the New SST(NSST)model capabilities toward transition/non-transition ***’s stress-intensity factor R_(b)=|-uv|/k can be parameterized with the wall-distance dependent Reynolds number Re_(y)=√ky/v;however,as the Re_(y)is replaced by a“flow-structure-adaptive”parameter R_(μ)=v_(T)/v,the resulting R_(b)is capable of capturing various transition phenomena *** prospective stress-intensity parameter R_(b)=R_(b)(Re_(y),R_(μ))is incorporated in the constitutive relations for eddy-viscosity v_(T) and production term P_(k).The proposed formulation is intrinsically plausible,having a dramatic impact on the prediction of bypass,separation-induced and natural transitions together with non-transitional *** extra viscous-production term P_(k)^(lim) is added with the k-equation to ensure proper generation of k at the viscous sublayer when computing separation-induced transition over a Low-Reynolds Number(LRN)*** demonstrate that the NSST k-ω model maintains an excellent consistency with both SST k-ω and γ-Re_(θ) models.

关键词： γ-Re_(θ)model Non-transition Stress-intensity parameter SST model Transition

Petrophysical properties assessment using wireline logs data at well#3 of Srikail gas field,Bangladesh

在线全文

学校读者我要写书评

暂无评论

China Geology 2022年第3期5卷 393-401页

作者： md.Shahadot Hossain M.moklesur rahman Mst.Habiba Khatu md.Rubel Haque Department of Petroleum and Mining Engineering Jashore University of Science and TechnologyJashore 7408Bangladesh

This study focused on the quantitative analysis of the petrophysical parameters in characterizing the reservoir properties of the Srikail gas field using multi-scale wireline *** parameters(shale volume,porosity,water saturation and hydrocarbon saturation)were estimated from the combination of gamma ray log,resistivity log,density log and neutron log for three hydrocarbon(gas)-bearing zones at well#*** the first time,log records at 0.1 m and 0.2 m intervals were read for this *** showed the average shale volume is 21.07%,53.67%and 51.71%for zone-1,zone-2 and zone-3,*** these zones,the estimated average porosity was 35.89%,29.83%and 28.76%,*** average water saturation of 31.54%,16.83%and 23.39%and average hydrocarbon saturation of 68.46%,83.17%and 76.61%were calculated for zone-1,zone-2 and zone-3,*** zone-2 is regarded the most productive zone of well#*** was found that the values of some parameters(porosity,hydrocarbon saturation and permeability)are higher than the existing ***,this study confirmed that the log reading at minute/close interval provides better quantitive values of the reservoir’s petrophysical *** is expected that this result will contribute to the national gas field development program in future.

关键词： Srikail gas field Multiple wireline logs Reservoir petrophysical properties Quantitative values Gas field development Bangladesh

Probabilistic seismic hazard assessment of Nepal using multiple seismic source models

在线全文

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2018年第4期2卷 327-341页

作者： md.moklesur rahman Ling Bai Key Laboratory of Continental Collision and Plateau Uplift Institute of Tibetan Plateau Research Chinese Academy of Sciences Department of Petroleum and Mining Engineering Jessore University of Science and Technology Department of Geophysics Stanford University

The potential for devastating earthquakes in the Himalayan orogeny has long been recognized. The 2015 MW7.8 Gorkha, Nepal earthquake has heightened the likelihood that major earthquakes will occur along this orogenic belt in the future. Reliable seismic hazard assessment is a critical element in development of policy for seismic hazard mitigation and risk reduction. In this study, we conduct probabilistic seismic hazard assessment using three different seismogenic source models(smoothed gridded, linear, and areal sources)based on the complicated tectonics of the study area. Two sets of ground motion prediction equations are combined in a standard logic tree by taking into account the epistemic uncertainties in hazard estimation. Long-term slip rates and paleoseismic records are also incorporated in the linear source model. Peak ground acceleration and spectral acceleration at 0.2 s and 1.0 s for 2% and 10%probabilities of exceedance in 50 years are estimated. The resulting maps show significant spatial variation in seismic hazard levels. The region of the Lesser Himalaya is found to have high seismic hazard potential. Along the Main Himalayan Thrust from east to west beneath the Main Central Thrust, large earthquakes have occurred regularly in history; hazard values in this region are found to be higher than those shown on existing hazard maps. In essence, the combination of long span earthquake catalogs and multiple seismogenic source models gives improved seismic hazard constraints in Nepal.

关键词： Gorkha earthquake probabilistic seismic hazard peak ground acceleration spectral acceleration source models logic tree

Sensitivity analysis of the DehumReq model to evaluate the impact of predominant factors on dehumidification requirement of greenhouses in cold regions

在线全文

学校读者我要写书评

暂无评论

Information Processing in Agriculture 2023年第2期10卷 216-228页

作者： md Sazan rahman Huiqing Guo Department of Mechanical Engineering University of Saskatchewan57 Campus driveSaskatoonSK S7N 5A9Canada Department of Bioresource Engineering McGill UniversityMacdonald Stewart Building21111 Lakeshore RoadSainte-Anne-de-BellevueQC H9X 3V9Canada

In this study,the sensitivity of a novel dehumidification requirement model(DehumReq)is analyzed to evaluate the effect of the predominant factors on the dehumidification needs of the *** hourly dehumidification demand and sensitivity coefficient(SC)are estimated for three different seasons:warm(July),mild(May),and cold(November),by using the local sensitivity analysis *** on SC values,the solar radiation,air exchange,leaf area index(LAI),and indoor setpoints(temperature,relative humidity(RH),and water vapor partial pressure(WVPP))have significant impact on the dehumidifi-cation needs,and the impact varies from season to *** parameters have a higher SC in summer,whereas solar radiation and LAI have a higher SC in mild *** dehumidification load increases 4 times of its base value with increasing solar radiation by 200 W/m^(2),and the highest LAI(10)caused 5 times increment of the *** changing of WVPP from its base value(1.5 kPa)to maximum(2.9 kPa)reduces the load 70%in *** exchange was found to be the most crucial parameter because it is the main dehumidification approach that has a large range and is easily adjustable for any *** air exchange by ventilation or infiltration will reduce the dehumidification load to zero in May and November and minimizes it to only nighttime load in *** the other parameters,higher ambient air RH and indoor air speed will result in higher the dehumidification load;whereas higher inner surface condensation will result in lower dehumidifi-cation *** result of this study will assist in the selection of the most efficient moisture control strategies and techniques for greenhouse humidity control.

关键词： Greenhouse Dehumidification DehumReq model Sensitivity analysis Solar radiation Air exchange

Crustal structure beneath Tien Shan orogenic belt and its adjacent regions from multi-scale seismic data

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2017年第10期60卷 1769-1782页

作者： N.Ghani KHAN BAI Ling ZHAO JunMeng LI GuoHui M.moklesur rahman CHENG Cheng YANG JianYa Key Laboratory of Continental Collision and Plateau Uplift Institute of Tibetan Plateau ResearchChinese Academy of Sciences Department of Earth Sciences COMSATS Institute of Information Technology (CIIT)

As one of the world's most active intracontinental mountain belts, Tien Shan has posed questions for researchers regarding the formation of different tectonic units and active shallow seismicity. Here, we used a huge data set comprising of 7094 earthquakes from local, regional and teleseismic seismic stations. We used waveform modeling and multi-scale double-difference earthquake relocation technique to better constrain the source parameters of the earthquakes. The new set of events provided us with better initial earthquake locations for further tomographic investigation. We found that reverse-faulting earthquakes dominate the whole study area while the fault plane solutions for earthquakes beneath the northwestern Tarim Basin and the Main Pamir Thrust are diverse. There is a low-velocity anomaly beneath Bashkaingdy at depth of 80 km, and high-velocity anomalies beneath central Tien Shan at shallower depths. These observations are the keys to understand the mechanism of Tien Shan's formation because of Tarim Basin northward and Kazakh Shield's southward subduction in the south and north respectively. Velocities beneath western Tien Shan are relatively high. We thus infer that the Western Tien Shan is relatively less deformed than the eastern Tien Shan primarily due to a relatively brittle mantle.

关键词： Tien Shan Earthquake relocation Velocity anomalies Differential subduction

Test and performance optimization of nozzle inclination angle and swirl combustor in a low-tar biomass gasifier:a biomass power generation system perspective

在线全文

学校读者我要写书评

暂无评论

Carbon Resources Conversion 2022年第2期5卷 139-149页

作者： md Mashiur rahman Agricultural Engineering Division Regional Agricultural Research StationBangladesh Agricultural Research InstituteJamalpur2000Bangladesh DTU Chemical Engineering Technical University of Denmark(DTU)Frederiksborgvej 399DK 4000 RoskildeDenmark

A nozzle inclination angle and swirl combustor inside the low-tar biomass(LTB)gasifier reactor were tested and optimized to evaluate these effects on tar reduction to design tar-free producer *** tar reduction process is mainly based on the concept of a swirling flow created by the nozzle inclination angle,with the inclination angle of 55◦to the radial line,allowing good mixing between pyrolysis gases and gasifying agents.A separate swirl combustor has created large internal annular and reverses flow zones with the help of swirl flow,resulting in homogenized temperature inside the combustor and providing longer residence time;both have a positive effect on the combustion of mixed gasifying air-pyrolysis gases by the thermal cracking in the partial oxidation *** ratio(RR)and combustion degree of volatiles are the two optimization parameters for evaluating the performance of NIA and swirl *** result observed that outstanding tar reduction occurred in this novel *** 86.5 and 12.8%of tar compounds are broken down in the partial oxidation zone and pyrolysis zone using the novel swirl combustor and NIA,respectively;gas outlet has observed producer gas having tar concentration of less than 1%.The optimization results reveal that a lower recycling ratio(recycle gas/gasifying air)and a higher combustion degree of volatiles perform better in biomass ***,this system generated producer gas with the tar concentration at an extremely low level of 7.4 mg/Nm^(3)for a biomass moisture content of 9%and appeared the lower heating value of 4.6–5.1 MJ/Nm^(3).This lower tar concentration might be directly coupled with an internal combustion engine or a gas turbine for power generation.

关键词： Biomass gasification Downdraft moving bed gasifier Nozzle inclination angle Swirl combustor Swirl flow Tar Reduction

Behaviour of self-centring shear walls——A state of the art review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2023年第1期17卷 53-77页

作者： Mehdi JAVADI Reza HASSANLI md Mizanur rahman md Rajibul KARIM UniSA STEM University of South AustraliaAdelaide 5095Australia

The application of unbonded post-tensioning (PT) in structural walls has led to the development of advanced self-centring (rocking) shear wall systems that has significant advantages, including accelerated construction due to the incorporation of prefabricated elements and segmental construction for different materials (e.g., concrete, masonry, and timber), reduced residual drifts, and little damage upon extreme seismic and wind loads. Concrete, masonry, and timber are often used for the construction of unbonded PT structural wall systems. Despite extensive research since the 1980s, there are no well-established design guidelines available on the shear wall configuration with the required energy dissipation system, joint’s locations and acceptance criteria for shear sliding, confinement, seismic performance factors, PT loss, PT force range and residual drifts of shear walls subjected to lateral loads. In this research a comprehensive state-of-the-art literature review was performed on self-centring shear wall system. An extensive study was carried out to collect a database of 100 concrete, masonry, and self-centring shear wall tests from the literature. The established database was then used to review shear walls’ configurations, material, and components to benchmark requirements applicable for design purposes. The behaviour of concrete, masonry and timber shear walls were compared and critically analysed. The general behaviour, force-displacement performance of the walls, ductility, and seismic response factors, were critically reviewed and analysed for different self-centring wall systems to understand the effect of different parameters including configurations of the walls, material used for construction of the wall (concrete, masonry, timber) and axial stress ratio. The outcome of this research can be used to better understand the behaviour of self-centring wall system in order to develop design guidelines for such walls.

关键词： self-centring shear walls rocking walls energy dissipation seismic performance factors PT loss residual drift

Self-centring segmental retaining walls—A new construction system for retaining walls

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2021年第4期15卷 980-1000页

作者： Mehdi JAVADI Reza HASSANLI md Mizanur rahman md Rajibul KARIM UniSA STEM University of South AustraliaMawson Lakes5095Australia

This paper reports on an experimental study on a new self-centring retaining wall *** post-tensioned segmental retaining walls(PSRWs)were experimentally *** of the walls was constructed using seven T-shaped concrete segments with a dry *** walls were tested under incrementally increasing cyclic lateral *** effect of the wall height,levels of post-tensioning(PT)force,and bonded versus unbonded condition of PT reinforcement on the structural behavior of the PSRWs was *** results showed that such PSRWs are structurally adequate for water retaining *** to the results,increasing the wall height decreases initial strength but increases the deformation capacity of the *** larger deformation capacity and ductility of PSRW make it a suitable structural system for fluctuating loads or deformation,e.g.,*** was also found that increasing the PT force increases the wall’s stiffness;however,reduces its *** residual drift and the extent of damage of the unbonded PSRWs were significantly smaller than those of the bonded *** suggest that this newly developed self-centring retaining wall can be a suitable structural system to retain lateral *** to its unique deformation capacity and self-centring behavior,it can potentially be used for seawall application.

关键词： retaining wall segmental precast concrete unbonded post-tensioning water retaining wall seawall