检索结果-南通市图书馆

Environmental Factors Affecting Chromium-manganese Oxidation-Reduction Reactions in Soil

Pedosphere 2011年第1期21卷 84-89页

作者： D.O.P.TREBIEN L.BORTOLON m.j.tedesco C.A.BISSANI F.A.O.CAmARGO Department of Agricultural Engineering Federal University of Santa Catarina Department of Soil Science Federal University of Rio Grande do Sul

Disposal of chromium （Cr） hexavalent form, Cr（Ⅵ）, in soils as additions in organic fertilizers, liming materials or plant nutrient sources can be dangerous since Cr（Ⅵ） can be highly toxic to plants, animals, and humans. In order to explore soil conditions that lead to Cr（Ⅵ） generation, this study were performed using a Paleudult （Dystic Nitosol） from a region that has a high concentration of tannery operations in the Rio Crande do Sul State, southern Brazil. Three laboratory incubation experiments were carried out to examine the influences of soil moisture content and concentration of cobalt and organic matter additions on soil Cr（Ⅵ） formation and release and manganese （mn） oxide reduction with a salt of chromium chloride （CrCl3） and tannery sludge as inorganic and organic sources of Cr（Ⅲ）, respectively. The amount of Cr（Ⅲ） oxidation depended on the concentration of easily reducible mn oxides and the oxidation was more intense at the soil water contents in which mn（Ⅲ/Ⅳ） oxides were more stable. Soluble organic compounds in soil decreased Cr（Ⅵ） formation due to Cr（Ⅲ） complexation. This mechanism also resulted in the decrease in the oxidation of Cr（Ⅲ） due to the tannery sludge additions. Chromium（Ⅲ） oxidation to Cr（Ⅵ） at the solid/solution interface involved the following mechanisms： the formation of a precursor complex on manganese （mn） oxide surfaces, followed by electron transfer from Cr（Ⅲ） to mn（Ⅲ or Ⅳ）, the formation of a successor complex with mn（Ⅱ） and Cr（Ⅵ）, and the breakdown of the successor complex and release of mn（Ⅱ） and Cr（Ⅵ） into the soil solution.

关键词： cobalt Cr(VI) oxidation mn oxides soil moisture tannery sludge

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Eye on the Sky: A UAP Research and Field Study off New York’s Long Island Coast

引用

Open journal of Applied Sciences 2024年第8期14卷 2267-2295页

作者： john joseph tedesco Gerald Thomas tedesco Harvard Universitys Galileo Project Independent Research Affiliate Cambridge USA Consortium for The Scientific Understanding of Natures mysteries Holbrook USA Institute of Electrical and Electronic Engineers Washington USA American Academy of Environmental Engineers and Scientist Annapolis USA Independent Researcher Holbrook USA

A ten-month field research study was meticulously conducted at Robert moses State Park (RmSP) on the south shore of Long Island, NY. The objective was to determine if aerial phenomena of an unknown nature exist over a coastal location and to characterize their properties and behaviors. Primary and secondary field observation methods were utilized in this data-centric study. Forensic engineering principles and methodologies guided the study. The challenges set forward were object detection, observation, and characterization, where multispectral electro-optical devices and radar were employed due to limited visual acuity and intermittent presentation of the phenomena. The primary means of detection utilized a 3 cm X-band radar operating in two scan geometries, the X- and Y-axis. multispectral electro-optical devices were utilized as a secondary means of detection and identification. Data was emphasized using HF and LF detectors and spectrum analyzers incorporating Em, ultrasonic, magnetic, and RF field transducers to record spectral data in these domains. Data collection concentrated on characterizing VIS, NIR, SWIR, LWIR, UVA, UVB, UVC, and the higher energy spectral range of ionizing radiation (alpha, beta, gamma, and X-ray) recorded by Geiger-müller counters as well as special purpose semiconductor diode sensors.

关键词： Unidentified Anomalous Phenomenon (UAP) Forensic Techno-Signatures Office of the Director of National Intelligence (ODNI) multispectral Electro-Optical (mEO) Ultraviolet A Radiation (UVA) Ultraviolet B Radiation (UVB) Ultraviolet C Radiation (UVC) Visible (VIS) Near-Infrared (NIR) Short-Wave Infrared (SWIR) Long-Wave Infrared (LWIR) Low-Frequency (LF) High-Frequency (HF) Radio-Frequency (RF) Alpha Beta Gamma Ultrasonic X-Band Active Radar Kinematics Aerodynamics Luminous Spheroids Robert moses State Park (RmSP)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

引用

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

引用

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

引用

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

引用

journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-montoya j.m.del Río A.de j.morales-Ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.Lindavista Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.Lindavista Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/n

Polymeric nanoparticles of poly(methyl methacrylate) were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR) and ultraviolet-visible(UV-Vis) *** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of [Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85% of [Eu] at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50% of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of6.

关键词： Chelating effect Emulsion polymerization Extraction process Rare earths Stripping process [Eu]recovery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior

引用

Particuology 2024年第7期90卷 412-417页

作者： Lillian m.mawby Bellamarie Ludwig Benjamin j.Lear Department of Chemistry The Pennsylvania State UniversityUniversity ParkPA16802USA Applied Research Laboratory The Pennsylvania State UniversityUniversity ParkPA16802USA

Though silanization of aluminum powder is currently used to improve its flow properties,for use as an alternative fuel source,there are a wide range of experimental parameters for the process and not all of them have been thoroughly *** this is complete,it is unknown if the process is optimized in terms of time,efficiency,and ***,we report on a study into the effects of changes in humidity,degree of agitation,reaction temperature,and curing time upon the deposition of phenyl triethoxysilane into 20μm(d50)aluminum *** confirm the deposition of the coating via diffuse reflectance infrared spectroscopy and x-ray photoelectron *** then characterize the coated particles using apparent density measurements and Carney flow *** analysis of variance,we find that,of the parameters explored,only changes in cure time and reaction temperature provide meaningful changes to the apparent density,while none of our parameters produced statistically significant changes in Carney flow ***,we conclude that,when optimizing silanization of aluminum particles,environmental control of humidity is unneeded and that the reaction can be run with minimal *** ability to largely ignore these parameters is a benefit to large-scale processing.

关键词： Aluminum powder Silane Fluidization Apparent density Carney flow

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Background removal from global auroral images:Data-driven dayglow modeling

引用

Earth and Planetary Physics 2024年第1期8卷 247-257页

作者： A.Ohma m.madelaire K.m.Laundal j.P.Reistad S.m.Hatch S.Gasparini S.j.Walker Birkeland Centre for Space Science Department of Physics and TechnologyUniversity of BergenBergenNorway

Global images of auroras obtained by cameras on spacecraft are a key tool for studying the near-Earth ***,the cameras are sensitive not only to auroral emissions produced by precipitating particles,but also to dayglow emissions produced by photoelectrons induced by *** emissions and scattered sunlight can contribute to the background *** fully utilize such images in space science,background contamination must be removed to isolate the auroral *** we outline a data-driven approach to modeling the background intensity in multiple images by formulating linear inverse problems based on B-splines and spherical *** approach is robust,flexible,and iteratively deselects outliers,such as auroral *** final model is smooth across the terminator and accounts for slow temporal variations and large-scale asymmetries in the *** demonstrate the model by using the three far ultraviolet cameras on the Imager for magnetopause-to-Aurora Global Exploration(ImAGE)*** method can be applied to historical missions and is relevant for upcoming missions,such as the Solar wind magnetosphere Ionosphere Link Explorer(SmILE)mission.

关键词： aurora dayglow modeling global auroral images far ultraviolet images dayglow removal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Greatly enhanced corrosion/wear resistances of epoxy coating for mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

引用

journal of magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.Xue X.j.Li j.H.Chu m.m.Li D.N.Zou L.B.Tong School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of mg alloys.

关键词： mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：