检索结果-南通市图书馆

mechanically driven assembly of biomimetic 2D-material microtextures with bioinspired multifunctionality

Nano Research 2024年第2期17卷 663-678页

作者： Yang Li lin jing joshua m.Little Haochen Yang Tsai-Chun Chung Po-Yen Chen Department of Chemical and Biomolecular Engineering University of MarylandCollege ParkMD 20740USA maryland Robotics Center University of MarylandCollege ParkMD 20742USA School of materials Science and Engineering Nanyang Technological University50 Nanyang AvenueSingapore 639798Singapore

Nature provides a wealth of bio-inspiration for advanced material *** various nanomaterials into biomimetic microtextures with bioinspired functionalities has spurred increasing research interests and facilitated technological advances in various *** recent years,two-dimensional materials(2Dms)have emerged as important building block units in the biomimicry field due to their distinct chemical,physical,electrical,electrochemical,and catalytic *** this review article,various mechanically driven assembly approaches are summarized to fabricate various genealogies of biomimetic 2Dm microtextures with bio-inspired ***,sequential deformation strategies are discussed to programmably construct higher dimensional 2Dm microtextures,ranging from wrinkles/crumples(one-time deformation)to multiscale hierarchies(multiple deformations).Next,the current progress using higher dimensional 2Dm microtextures to imitate different biological structures and/or induce bio-inspired multifunctionality is systematically *** showcases of bio-inspiration and biomimicry using different 2Dm nanosheets are highlighted:(1)wrinkle patterns of an earthworm that spur the design of strain sensors with programmable working ranges and sensitivities,(2)wrinkle appearance of a Shar-Pei dog that motivates the fabrication of stretchable energy storage devices,(3)hierarchical scale textures of a desert lizard that inspire cation-induced gelation platforms for 2Dm aerogels,and(4)wrinkle skin of an elephant that influences the development of 2Dm protective skin for soft ***,challenges and future opportunities of adopting 2Dm nanosheets to assemble biomimetic microstructures with synergistic functionalities are discussed.

关键词： two-dimensional(2D)materials mechanically driven assembly biomimetic microtextures functional nanocomposite bio-inspired multifunctionality

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimal structural design for a certain near-space composite propeller of airship using adaptive region division blending model

引用

Chinese journal of Aeronautics 2024年第5期37卷 301-316页

作者： Weigang AN Tianyu lin Shigen WANG School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China

Near-space airship is a frontier and hotspot in current military research and development,and the near-space composite propeller is the key technology for its *** order to obtain higher aerodynamic efficiency at an altitude of 22 km,a certain near-space composite propeller is designed as a long and slender aerodynamic shape with a 10 m diameter,which brings many challenges to the composite structure *** initial design is obtained by the composite structure variable stiffness design method using based on fixed region division blending ***,it weighs 23.142 kg,exceeding the required 20 *** order to meet the structural design requirements of the propeller,a variable stiffness design method using the adaptive region division blending model is proposed in this *** with the methods using the fixed region division blending model,this method optimizes region division,stacking thickness and stacking sequence in a single level,considering the coupling effect among *** a more refined region division,this method can provide a more optimal design for composite tapered ***,to improve the efficiency of optimization subjected to manufacturing constraints,a hierarchical penalty function is proposed to quickly filter out the solutions that do not meet manufacturing *** above methods combined with a Genetic Algorithm(GA)using specific encoding are adopted to optimize the near-space composite *** optimal design of the structure weighs 18.831 kg,with all manufacturing constraints and all structural response constraints being *** with the initial design,the optimal design has a more refined region division,and achieves a weight reduction of 18.6%.This demonstrates that a refined region division can significantly improve the mechanical performance of the composite tapered structure.

关键词： Structural optimization Composite tapered structure Genetic algorithm Adaptive region division manufacturing constraint Near-space composite propeller

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sequential good lattice point sets for computer experiments

引用

Science China mathematics 2024年第9期67卷 2153-2170页

作者： Xue-Ru Zhang Yong-Dao Zhou min-Qian Liu Dennis K.j.lin NITFID LPMC&KLMDASRSchool of Statistics and Data ScienceNankai UniversityTianjin 300071China Department of Statistics Purdue UniversityWest LafayetteIN 47907USA

Sequential Latin hypercube designs(SLHDs) have recently received great attention for computer experiments, with much of the research restricted to invariant spaces. The related systematic construction methods are inflexible, and algorithmic methods are ineffective for large designs. For designs in contracting spaces, systematic construction methods have not been investigated yet. This paper proposes a new method for constructing SLHDs via good lattice point sets in various experimental spaces. These designs are called sequential good lattice point(SGLP) sets. moreover, we provide efficient approaches for identifying the(nearly)optimal SGLP sets under a given criterion. Combining the linear level permutation technique, we obtain a class of asymptotically optimal SLHDs in invariant spaces, where the L1-distance in each stage is either optimal or asymptotically optimal. Numerical results demonstrate that the SGLP set has a better space-filling property than the existing SLHDs in invariant spaces. It is also shown that SGLP sets have less computational complexity and more adaptability.

关键词： contracting space maximin distance nested Latin hypercube design sequential design space-fillingdesign

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A soft-contact hybrid electromagnetic–triboelectric nanogenerator for self-powered water splitting towards hydrogen production

引用

Nano Research 2024年第7期17卷 6567-6574页

作者： Fuxue ma Yingjie Wu Shuge Dai Pei lin junlu Sun lin Dong Key Laboratory of material Physics of ministry of Education and School of Physics and MicroelectronicsZhengzhou UniversityZhengzhou 450000China

The effective acquisition of hydrogen energy from the ocean offers a promising sustainable solution for increasing global energy ***,a self-powered high-efficient hydrogen generation system is proposed by integrating a triboelectric–electromagnetic hybrid nanogenerator(TEHG),power management circuit(PmC),and an electrolytic *** the wind triggering,as-fabricated TEHG can effectively convert breeze energy into electric energy,which demonstrates a high output current of 20.3 mA at a speed rotation of 700 rpm and the maximal output power of 13.8 mW at a load of 10 mΩ.Remarkably,asdesigned self-powered system can perform a steady and continuous water splitting to produce hydrogen(1.5μL·min^(−1))by adding a matching capacitor between the PmC and electrolytic *** the circuit,the capacitor can not only function as a charge compensation source for water splitting,but also stabilize the working *** other self-powered water splitting systems,the proposed system does not need catalysts or the complex electrical energy storage/release process,thus improving the hydrogen production efficiency and reducing the *** work provides an effective strategy for clean hydrogen energy production and demonstrates the huge potential of the constructed self-powered system toward carbon neutralization.

关键词： wind energy harvester hybrid nanogenerator energy conversion and management hydrogen energy production

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis and characteristics of transparent Gd_(2)O_(3)ceramics with cubic structure

引用

journal of Advanced Ceramics 2024年第4期13卷 463-468页

作者： Akio Ikesue Yan lin Aung World Lab Co. Nagoya456-8587Japan

Transparent Gd_(2)O_(3)ceramics with a cubic crystal structure were successfully synthesized for the first *** Gd_(2)O_(3)ceramics subjected to hot isostatic press(HIP)at 1070℃consisted of uniform grains of 2-3μm,and only a few residual pores could be detected inside the materials.X-ray diffraction(XRD)shows that the obtained polycrystalline materials have a cubic crystal structure,and the transmission polarized light observation shows that there is no birefringence inside the materials,indicating inherent optical properties of the cubic crystal *** optical absorption edge is 640 nm(optical band gap:2.1 eV),and the transmittance in the visible to near-infrared region is 72%,which is close to the theoretical transmittance calculated from Fresnel *** constant of this material is almost wavelength-independent,and it is diamagnetic since it has the opposite polarity to that of common paramagnetic materials.

关键词： gadolinium oxide cubic hot isostatic press(HiP) diamagnetic Verdet constant

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Systematic Review of Computer Vision Techniques for Quality Control in End-of-line Visual Inspection of Antenna Parts

引用

Computers, materials & Continua 2024年第8期80卷 2387-2421页

作者： Zia Ullah lin Qi E.j.Solteiro Pires Arsénio Reis Ricardo Rodrigues Nunes School of Electrical and Information Engineering Zhengzhou UniversityZhengzhou450001China School of Science and Technology Universidade de Trás-os-Montes e Alto DouroVila Real5000-801Portugal

The rapid evolution of wireless communication technologies has underscored the critical role of antennas in ensuring seamless *** defects,ranging from manufacturing imperfections to environmental wear,pose significant challenges to the reliability and performance of communication *** review paper navigates the landscape of antenna defect detection,emphasizing the need for a nuanced understanding of various defect types and the associated challenges in visual *** review paper serves as a valuable resource for researchers,engineers,and practitioners engaged in the design and maintenance of communication *** insights presented here pave the way for enhanced reliability in antenna systems through targeted defect detection *** this study,a comprehensive literature analysis on computer vision algorithms that are employed in end-of-line visual inspection of antenna parts is *** PRISmA principles will be followed throughout the review,and its goals are to provide a summary of recent research,identify relevant computer vision techniques,and evaluate how effective these techniques are in discovering defects during *** contains articles from scholarly journals as well as papers presented at conferences up until june *** research utilized search phrases that were relevant,and papers were chosen based on whether or not they met certain inclusion and exclusion *** this study,several different computer vision approaches,such as feature extraction and defect classification,are broken down and ***,their applicability and performance are *** review highlights the significance of utilizing a wide variety of datasets and measurement *** findings of this study add to the existing body of knowledge and point researchers in the direction of promising new areas of investigation,such as real-time inspection systems and multispectral *** review,on its whole,of

关键词： Computer vision end-of-line visual inspection of antenna parts machine learning algorithms image processing techniques deep learning models

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Correlation Study on Grain Size Characteristics and Geotechnical Properties of Surface Sediments in Qingdao Offshore Area

引用

journal of Ocean University of China 2024年第3期23卷 721-730页

作者： LI Anlong WANG Panpan GUO Xijun jI Xiangkun SHEN Kunming lin lin YAN Zhichao YUAN lin Key Laboratory of Submarine Geosciences and Prospecting Techniques Ministry of Education and College of Marine GeosciencesOcean University of ChinaQingdao 266100China College of marine Geoscience Ocean University of ChinaQingdao 266100China China Construction Second Engineering Bureau Co. LTDYueyang 414000China Tianjin Research Institute for Water Transport Engineering M.O.T.Tianjin 3000456China Lianyungang Xuwei Port Holding Group Co. Ltd.Lianyungang 222042China

The comprehension of sediment grain size parameters and the corresponding sedimentary environment holds paramount importance in elucidating the engineering geological attributes of the subaqueous *** study delineated the sedimentary environment zoning in the northern sea area of Qingdao through cluster analysis of grain size parameters derived from 123 surface sediment *** study analyzed the correlation between sediment geotechnical indices and grain size parameters across diverse sedimentary environments.A correlation equation was established for samples exhibiting a strong *** study found four distinct sedimentary environments in the study area:coastal,transitional,shallow sea,and *** the same sedimentary environment,the average grain size and sorting coefficient exhibit significant correlations with geotechnical indices such as water content,density,shear strength,plastic limit,liquid limit,and plastic ***,notable disparities in the correlation between grain size parameters and geotechnical indices emerge across different sedimentary environments.

关键词： grain size parameters cluster analysis sedimentary environment correlations geotechnical indexes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm.j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A new elastoplastic model for bolt-grouted fractured rock

引用

International journal of mining Science and Technology 2024年第7期34卷 995-1016页

作者： Haoyi Li Shuangying Zuo Peiyuan lin State Key Laboratory for Tunnel Engineering Sun Yat-Sen UniversityGuangzhou 510275China Southern marine Science and Engineering Guangdong Laboratory Zhuhai 519082China School of Civil Engineering Sun Yat-Sen UniversityGuangzhou 510275China College of Resources and Environmental Engineering Guizhou UniversityGuiyang 550025China

Complexities in mechanical behaviours of rock masses mainly stem from inherent discontinuities,which calls for advanced bolt-grouting techniques for stability *** the mechanical properties of bolt-grouted fractured rock mass(BGFR)and developing accurate prediction methods are crucial to optimize the BGFR support *** paper establishes a new elastoplastic(E-P)model based on the orthotropic and the mohr-Coulomb(m-C)plastic-yielding *** elastic parameters of the model were derived through a meso-mechanical analysis of composite materials mechanics(Cmm).Laboratory BGFR specimens were prepared and uniaxial compression test and variable-angle shear test considering different bolt arrangements were carried out to obtain the mechanical parameters of the *** showed that the anisotropy of BGFR mainly depends on the relative volume content of each component material in a certain ***,the mechanical parameters deduced from the theory of composite materials which consider the short fibre effect are shown to be in good agreement with those determined by laboratory experiments,and the variation rules maintained good ***,a case study of a real tunnel project is provided to highlight the effectiveness,validity and robustness of the developed E-P model in prediction of stresses and deformations.

关键词： Bolt-grouted fractured rock mass Elastoplastic model Composite materials mechanics Laboratory experiment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Association of daily sitting time and leisure-time physical activity with body fat among ***

引用

journal of Sport and Health Science 2024年第2期13卷 195-203页

作者： jingwen Liao min Hu Kellie Imm Clifton j.Holmes jie Zhu Chao Cao lin Yang Guangdong Provincial Key Laboratory of Physical Activity and Health Promotion Guangzhou Sport UniversityGuangzhou 510500China Scientific Research Center Guangzhou Sport UniversityGuangzhou 510500China Division of Epidemiology&Genetics Department of Population and Public Health SciencesKeck School of Medicine of the University of Southern CaliforniaLos AngelesCA 90033USA Program in Physical Therapy Washington University School of MedicineSt.LouisMO 63110USA Center for Human Nutrition Washington University School of MedicineSt.LouisMO 63110USA Department of Plastic and Reconstructive Surgery Shanghai East HospitalTongji UniversityShanghai 200070China Department of Cancer Epidemiology and Prevention Research Alberta Health ServicesCalgary T2S 3C3Canada Department of Oncology and Community Health Sciences University of CalgaryCalgary T2N 1N4Canada

Background:Prolonged sitting and reduced physical activity lead to low energy ***,little is known about the joint impact of daily sitting time and physical activity on body fat *** investigated the independent and joint associations of daily sitting time and physical activity with body fat among ***:This was a cross-sectional analysis of *** representative data from the National Health and Nutrition Examination Survey2011-2018 among adults aged 20 years or *** sitting time and leisure-time physical activity(LTPA)were self-reported using the Global Physical Activity *** fat(total and trunk fat percentage)was determined via dual X-ray ***:Among 10,808 adults,about 54.6%spent 6 h/day or more sitting;more than one-half reported no LTPA(inactive)or less than 150 min/week LTPA(insufficiently active)with only 43.3%reported 150 min/week or more LTPA(active)in the past *** fully adjusting for sociodemographic data,lifestyle behaviors,and chronic conditions,prolonged sitting time and low levels of LTPA were associated with higher total and trunk fat percentages in both *** stratifying by LTPA,the association between daily sitting time and body fat appeared to be stronger in those who were inactive/insuufficiently *** the joint analyses,inactive/insuufficiently active adults who reported sitting more than 8 h/day had the highest total(female:3.99%(95%confidence interval(95%CI):3.09%-4.88%);male:3.79%(95%CI:2.75%-4.82%))and trunk body fat percentages(female:4.21%(95%CI:3.09%-5.32%);male:4.07%(95%CI:2.95%-5.19%))when compared with those who were active and sitting less than 4 h/***:Prolonged daily sitting time was associated with increased body fat among *** higher body fat associated with 6 h/day sitting may not be offset by achieving recommended levels of physical activity.

关键词： Adults Body fat distribution Physical activity Sitting time

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：