检索结果-南通市图书馆

焊料对锰铝青铜补焊件显微组织和力学性能的影响（英文）

在线全文

学校读者我要写书评

暂无评论

中国有色金属学报：英文版 2017年第3期27卷 507-513页

作者： m.R.mIRZADEHRAHNI B.BEIDOKHTI m.haddad-sabzevar materials and metallurgical Engineering Department Faculty of EngineeringFerdowsi University of MashhadMashhadIran

使用不同金属焊料对UNS C95700锰铝青铜板进行补焊,研究焊件的显微组织和力学性能。结果表明,焊件主要显微组织为具有不同形貌的α,β和κ相。锰的加入使焊件显微组织中α相的含量由80%(无mn焊件)降低到57%(12.5%mn焊件)。在高镍焊件中... 详细信息

使用不同金属焊料对UNS C95700锰铝青铜板进行补焊,研究焊件的显微组织和力学性能。结果表明,焊件主要显微组织为具有不同形貌的α,β和κ相。锰的加入使焊件显微组织中α相的含量由80%(无mn焊件)降低到57%(12.5%mn焊件)。在高镍焊件中κ相的形貌为层状,而在高锰焊件中κ相形貌变为球状。相对于使用高镍焊料获得的焊件,采用高锰焊料获得的焊件具有较高的抗拉强度和弯曲强度。当以非合金焊料ERCuAl-A2为衬底、高锰焊料(ERCumnNiAl)为填充焊道进行补焊时,焊件的力学性能最佳。此焊件的抗拉强度比基体金属的抗拉强度提高了39%,且弯曲试验后仍未发生开裂现象。

关键词：锰铝青铜焊接焊料显微组织力学性能

不同温度下AA6061/Al_2O_3纳米复合材料的加工图和组织评价（英文）

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous metals Society of China 2017年第6期27卷 1248-1256页

作者： H.R.EZATPOUR S.A.SAJJADI m.haddad sabzevar A.CHAICHI G.R.EBRAHImI Faculty of Engineering Sabzevar University of New Technology Sabzevar *** Iran Department of materials Science and metallurgical Engineering Engineering FacultyFerdowsi University of Mashhad Mashhad Iran Department of mechanical & Industrial Engineering Louisiana State University Baton Rouge Louisiana 70803 USA Department of materials and Polymer Engineering Hakim Sabzevari University Sabzevar Iran

为确定热加工性能的最佳条件,在温度350~500°C、应变率0.0005~0.5 s^(-1)下研究Al6061/Al_2O_3纳米复合材料的热压缩行为。采用双曲正弦函数得到材料热压缩测试活化能为285 kJ/mol。用动态材料模型和相应的加工图,确定了温度450°C、... 详细信息

为确定热加工性能的最佳条件,在温度350~500°C、应变率0.0005~0.5 s^(-1)下研究Al6061/Al_2O_3纳米复合材料的热压缩行为。采用双曲正弦函数得到材料热压缩测试活化能为285 kJ/mol。用动态材料模型和相应的加工图,确定了温度450°C、应变速率0.0005 s^(-1)和温度500°C、应变速率0.0005~0.5 s^(-1)为Al6061/Al_2O_3材料的热加工性能安全区,最大功率损耗率为38%。由于材料大变形,在温度400°C和应变速率0.5 s^(-1)下得到了被伸长和扭结晶粒。

关键词：纳米复合材料热压缩测试加工图动态再结晶流变失稳

Uncovering the dominant contribution of intermediate volatility compounds in secondary organic aerosol formation from biomass-burning emissions

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 150-158页

作者： Kun Li Jun Zhang David m.Bell Tiantian Wang Houssni Lamkaddam Tianqu Cui Lu Qi mihnea Surdu Dongyu Wang Lin Du Imad El haddad Jay G.Slowik Andre S.H.Prevot Environment Research Institute Shandong University Laboratory of Atmospheric Chemistry Paul Scherrer Institute

Organic vapors from biomass burning are a major source of secondary organic aerosols(SOAs). Previous smog chamber studies found that the SOA contributors in biomass-burning emissions are mainly volatile organic compounds(VOCs). While intermediate volatility organic compounds(IVOCs) are efficient SOA precursors and contribute a considerable fraction of biomass-burning emissions, their contribution to SOA formation has not been directly observed. Here, by deploying a newly-developed oxidation flow reactor to study SOA formation from wood burning, we find that IVOCs can contribute ～70% of the formed SOA, i.e.>2 times more than VOCs. This previously missing SOA fraction is interpreted to be due to the high wall losses of semi-volatile oxidation products of IVOCs in smog chambers. The finding in this study reveals that SOA production from biomass burning is much higher than previously thought, and highlights the urgent need for more research on the IVOCs from biomass burning and potentially other emission sources.

关键词： atmospheric chemistry biomass burning secondary organic aerosol intermediate volatility organic compounds

Influence of cerium ions on structure-dependent magnetic properties of Ba-Sr m-type hexaferrite nanocrystals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 364-372,I0005页

作者： Ram A.Pawar Sunil m.Patange P.m.Dighe Sher Singh meena Abdullah GAl-Sehemi mehboobali Pannipara Santosh S.Jadhav Department of Physics ArtsCommerce and Science CollegeAhmednagar413711MaharashtraIndia Department of Physics Shri Krishna MahavidyalayaGunjotiDistOsmanabad413606MaharashtraIndia Padmashri Vikhe Patil College of Arts Science and CommercePravaranagarA/P.Loni(Kd)Tal.RahataDistAhmednagar413713MaharashtraIndia Solid State Physics Division Bhabha Atomic Research CentreMumbai400085MaharashtraIndia Department of Chemistry King Khalid UniversityAbha61413Saudi Arabia Department of Physics D.S.M's ArtsCommerce and Science CollegeJintur431509MaharashtraIndia

The present study is a systematic effort to investigate the structure-sensitive magnetic parameters of Ce^(3+) substituted Ba-Sr hexaferrite nanocrystals chemically formulated as Ba_(0.5)Sr_(0.5)Ce_(x)Fe_(12-x)O_(19) where x=0.0-0.2 with Δx=0.05.The hexaferrite powders were prepared using the sol-gel self-ignition route and structurally characterized by means of powder X-ray diffraction and Fourier transform infrared spectroscopy.The creation of the m-type hexaferrite phase within the synthesized samples was revealed from the Rietveld refinement of the X-ray diffractograms.The occurrence of a secondary phase of CeO_(2) was revealed within the hexaferrites for the substitution,x> 0.The refined X-ray diffraction data were utilized to compute the lattice parameters,X-ray density,and lattice parameter ratio.The crystal structure plotted from the refined XRD data reveals the occupancy of the ions at different lattice sites.The XPS data of the hexaferrite were analyzed to confirm the oxidation states of the constituent elements.The nanocrystalline nature of the hexaferrites was revealed from the crystallite sizes calculated using Scherer's formula.The analysis of FTIR spectra confirms that only a fraction of Ce^(3+)accommodated in the lattice and the remaining Ce content reside in the form of the CeO_(2) phase.The morphology of the hexaferrites was analyzed from the FESEm profiles of the ferrite samples.The magnetic behavior study was performed by analyzing the Curie temperature,hysteresis loops,and hyperfine interactions by means of susceptibility,V.S.m,and mossbauer spectroscopy,respectively.The hexaferrites with increasing coercivity,decreasing saturation magnetization,and decreasing Curie temperature are reported in the study.The substituted Ce^(3+)ions inhibit the grain growth and create lattice imperfections giving rise to hexaferrites with tuned magnetic parameters suitable for different applications.

关键词： Ba-Sr hexaferrite Ce^(3+)substitution XPS Saturation magnetization Coercivity m?ssbauer spectroscopy

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.J.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency domains.Three different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into account.Also,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss factor.Following the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL software.Subsequent parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse modes.The results show that considering the rubber viscoelasticity enhances the wave attenuation performance.moreover,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal counterpart.The 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Engineering of efficient visible light photocatalysts:Ti_(1-x+y)Cu_(x)La_(y)O_(2)(x=0.03;y=0,0.005,0.01) compositions

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 497-505,I0003页

作者： S.m.Yakout A.m.Youssef Inorganic Chemistry Department National Research Centre(NRC)El Buhouth StDokkiCairo12622Egypt

In dye-photocatalysis, widening the wavelengths absorption range of catalysts as well as aborting the recombination of the photoexcited charge carriers(electrons-holes pairs) are of paramount significance.In the current study, we report the photocatalytic characteristics of four compositions composed of TiO_(2),Ti_(0.97)Cu_(0.03)O_(2), Ti_(0.965)Cu_(0.03)La_(0.005)O_(2)and Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)powders for two harmful dyes(Congo red and methylene blue). The X-ray diffraction technique verified the configuration of mixed anatase and rutile phases in pure TiO_(2)and Ti_(0.97)Cu_(0.03)O_(2)powders while Ti_(0.965)Cu_(0.03)La_(0.005)O_(2)and Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)powders possess anatase phase only. The changes of the band gap structure and dimensions of the unit cell volume of TiO_(2)confirm the substitution of Ti^(4+)sites by Cu^(2+)and La^(3+)ions. Remarkable widening of wavelengths absorption with formation of long absorption tails were found in TiO_(2)(3.13 e V) through insertion of La^(3+)plus Cu^(2+)ions. Ti_(0.965)Cu_(0.03)La_(0.005)O_(2)and Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)samples exhibit a visible light band gap of 2.3 and 2.7 e V, respectively. Based on SEm images, incorporation of Cu^(2+)and La^(3+)ions influences the surface morphology of TiO_(2). The resulting Ti_(0.97)Cu_(0.03)O_(2), Ti_(0.965)Cu_(0.03)La_(0.005)O_(2)and Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)powders present enhanced photocatalytic activity towards Congo red dye degradation compared to pure one under natural solar spectrum. The best Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)catalyst exhibits superior photocatalytic activity of 96% for 10 ppm CR dye in 20 min as well as above average photocatalytic efficiency of 63% for 30 ppm CR dye in 120 min. As well, it showed acceptable photodegradation activity of 52% for 30 ppm mB solution in 140 min of sunlight irradiation. The heightened photodegradation efficiency of Ti_(0.96)Cu_(0.03)La_(0.01)O_(2)catalyst can be clarified in terms of higher charge carriers' separation(Cu^(2+)+ e-→ Cu^(+), L

关键词： Semiconductor TiO_(2) Rare earths Congo red methylene blue Solar spectrum Photodegradation

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 543-562页

作者： H.m.FEIZABAD m.H.YAS Department of mechanical Engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent years.Bamboo fibers are renowned for their good mechanical properties,abundance,and short cycle growth.As beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic foundation.Three different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the thickness.The elastic properties of the composite are determined with the law of mixture.Employing Hamilton’s principle,the governing equations of motion are obtained.The generalized differential quadrature method(GDQm)is then applied to the equations to obtain the results.The achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam change.Furthermore,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber distribution.Eventually,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQm)

Nonlinear dynamic modeling of planar moving Timoshenko beam considering non-rigid non-elastic axial effects

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 479-496页

作者： m.ABBASI GAVARI m.R.HOmAEINEZHAD Faculty of mechanical Engineering K.N.Toosi University of TechnologyTehran 19991-43344Iran

Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible manipulator.The manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse deformation.To accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation effects.By applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(Amm)is used to solve this nonlinear system of governing equations with appropriate shape functions.The assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the other.In addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is investigated.Despite the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the arm.Finally,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element approach.The comparison confirms the validity of the proposed dynamic model for the system.According to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.

关键词： planar moving Timoshenko beam non-rigid non-elastic axial effect as-sumed mode method(Amm) nonlinear motion analysis

Impact of increasing one-carbon metabolites on traumatic brain injury outcome using pre-clinical models

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第8期19卷 1728-1733页

作者： Sanika m.Joshi Theresa Currier Thomas Nafisa m.Jadavji College of Osteopathic medicine Midwestern UniversityGlendaleCAUSA Department of Biomedical Sciences Midwestern UniversityGlendaleCAUSA Department of Child Health College of Medicine–PhoenixUniversity of ArizonaPhoenixAZUSA College of Veterinary medicine Midwestern UniversityGlendaleCAUSA Department of Neuroscience Carleton UniversityOttawaCanada

Traumatic brain injury is a major cause of death and disability worldwide,affecting over 69 million individuals yearly.One-carbon metabolism has been shown to have beneficial effects after brain damage,such as ischemic stroke.However,whether increasing one-carbon metabolite vitamins impacts traumatic brain injury outcomes in patients requires more investigation.The aim of this review is to evaluate how one-carbon metabolites impact outcomes after the onset of traumatic brain injury.Pubmed,Web of Science,and Google Scholar databases were searched for studies that examined the impact of B-vitamin supplementation on traumatic brain injury outcomes.The search terms included combinations of the following words:traumatic brain injury,dietary supplementation,one-carbon metabolism,and B-vitamins.The focus of each literature search was basic science data.The year of publication in the literature searches was not limited.Our analysis of the literature has shown that dietary supplementation of B-vitamins has significantly improved the functional and behavioral recove ry of animals with traumatic brain injury compared to controls.Howeve r,this improvement is dosage-dependent and is contingent upon the onset of supplementation and whether there is a sustained or continuous delive ry of vitamin supplementation post-traumatic brain injury.The details of supplementation post-traumatic brain injury need to be further investigated.Overall,we conclude that B-vitamin supplementation improves behavioral outcomes and reduces cognitive impairment post-traumatic brain injury in animal model systems.Further investigation in a clinical setting should be stro ngly considered in co njunction with current medical treatments for traumatic brain injury-affected individuals.

关键词： folic acid nicotinamide one-carbon metabolism riboflavin traumatic brain injury vitamin B12 vitamin B2 vitamin B3