检索结果-南通市图书馆

Graphene enables equiatomic FeNiCrCoCu high-entropy alloy with improved TWIP and TRIP effects under shock compression

引用

Journal of Materials Science & Technology 2024年第3期170卷 186-199页

作者： Hongcai Xie Zhichao Ma Wei Zhang Hongwei Zhao luquan ren School of Mechanical and Aerospace Engineering Jilin UniversityChangchun 130025China Key Laboratory of CNC Equipment Reliability Ministry of Education Jilin UniversityChangchun 130025China Key Laboratory of Bionic Engineering Ministry of Education Jilin UniversityChangchun 130025China Weihai Institute for Bionics-Jilin University Weihai 264400China Institute of Structured and Architected Materials Liaoning Academy of MaterialsShenyang 110167China

Graphene(Gr)reinforced high-entropy alloy(HEA)matrix composites are expected as potential candidates for next-generation structural applications in light of outstanding mechanical properties.A deep comprehension of the underlying deformation mechanisms under extreme shock loading is of paramount importance,however,remains lacking due to experimentally technical limitations in *** the present study,by means of nonequilibrium molecular dynamics simulations,dynamic deformation behaviors and corresponding mechanisms in equiatomic FeNiCrCoCu HEA/Gr composite systems were investigated in terms of various shock *** resistance to dislocation propagation imparted by Gr was corroborated to encourage the elevated local stress level by increasing the likelihood of dislocation interplays,which facilitated the onset of twins and hexagonal close-packed(HCP)martensite ***,the advent of Gr was demonstrated to endow the HEA with an additional twinning pathway that induced a structural conversion from HCP to parent face-centered cubic(FCC)inside HCP martensite laths,different from the classical one that necessitated undergoing the intermediate procedure of extrinsic stacking fault(ESF)*** than that,by virtue of an increase in flow stress,the transformation-induced plasticity(TRIP)effect was validated to be additionally evoked as the predominant strain accommodation mechanism at higher strains on the one hand,but which only assisted plasticity in pure systems,and on the other hand,can also act as an auxiliary regulation mode together with the twinning-induced plasticity(TWIP)effect under intermediate strains,but with enhanced contributions relative to pure *** may expect that TRIP and TWIP effects promoted by introducing Gr would considerably inspire a synergistic effect between strength and ductility,contributing to the exceptional shock-resistant performance of FeNiCrCoCu HEAs under extreme regimes.

关键词： Molecular dynamics High-entropy alloy Graphene TRIP TWIP Shock

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Laser-based bionic manufacturing

引用

International Journal of Extreme Manufacturing 2024年第4期6卷 62-84页

作者： Xingran Li Baoyu Zhang Timothy Jakobi Zhenglei Yu luquan ren Zhihui Zhang Key Laboratory of Bionic Engineering(Ministry of Education) Jilin UniversityChangchunPeople's Republic of China Institute of Structured and Architected Materials Liaoning Academy of MaterialsShenyangPeople's Republic of China The University of New South Wales CanberraNorthcott DrCampbellACT 2612Australia

Over millions of years of natural evolution,organisms have developed nearly perfect structures and *** self-fabrication of organisms serves as a valuable source of inspiration for designing the next-generation of structural materials,and is driving the future paradigm shift of modern materials science and ***,the complex structures and multifunctional integrated optimization of organisms far exceed the capability of artificial design and fabrication technology,and new manufacturing methods are urgently needed to achieve efficient reproduction of biological *** one of the most valuable advanced manufacturing technologies of the 21st century,laser processing technology provides an efficient solution to the critical challenges of bionic *** review outlines the processing principles,manufacturing strategies,potential applications,challenges,and future development outlook of laser processing in bionic manufacturing *** primary manufacturing strategies for laser-based bionic manufacturing are elucidated:subtractive manufacturing,equivalent manufacturing,and additive *** progress and trends in bionic subtractive manufacturing applied to micro/nano structural surfaces,bionic equivalent manufacturing for surface strengthening,and bionic additive manufacturing aiming to achieve bionic spatial structures,are ***,the key problems faced by laser-based bionic manufacturing,its limitations,and the development trends of its existing technologies are discussed.

关键词： bionic manufacturing laser processing bionic micro/nano structural surface bionic strengthening surface bionic spatial structure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design,Testing and Control of a Magnetorheological Damper for Knee Prostheses

引用

Journal of Bionic Engineering 2024年第4期21卷 1788-1800页

作者： Hounan Song Yu Cao Wei Chen Lei ren Yongxin Ma Kunyang Wang Xu Wang Yao Zhang luquan ren Key Laboratory of Bionic Engineering Ministry of EducationJilin UniversityChangchun130022People’s Republic of China Department of Mechanical Aerospace and Civil EngineeringThe University of ManchesterManchesterM139PLUK

This study aims to develop a magnetorheological(MR)damper for semi-active knee prostheses to restore the walking ability of transfemoral *** core dimensions of the MR damper were determined via theoretical magnetic field calculations,and the theoretical relationship between current and joint torque was derived through electromagnetic ***,a physical prototype of the semi-active prosthetic knee equipped with the MR damper was *** on the data obtained from angle sensor,pressure sensor(loadcell),and inertial measurement unit(IMU)on the prosthesis,a matching control algorithm is *** joint torque of the MR damper can be adaptively adjusted according to the walking speed of the amputee,allowing the amputee to realize a natural *** effectiveness of the control program was verified by the ADAMS and MATLAB *** results of the test and simulation show that the MR damper can provide sufficient torque needed for normal human activities.

关键词： Semi-active knee prosthesis Magnetorheological damper Theoretical analysis ADAMS and MATLAB co-simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Role of Multi-scale Hierarchical Structures in Regulating Wetting State and Wetting Properties of Structured Surfaces

引用

Journal of Bionic Engineering 2024年第3期21卷 1347-1359页

作者： Yue Jiang Xinyi Li Zhichao Ma Zhihui Zhang Cuie Wen Zhonghao Jiang Nan Lin luquan ren Key Laboratory of Bionic Engineering of Ministry of Education College of Biological and Agricultural EngineeringJilin UniversityChangchun130022China Hubei Provincial Engineering Technology Research Center for Microgrid College of Electrical Engineering and New EnergyChina Three Gorges UniversityYichang443002China School of Mechanical and Aerospace Engineering Jilin UniversityChangchun130025China Centre for Additive Manufacturing School of EngineeringRMIT UniversityMelbourneVictoria3001Australia Key Laboratory of Automobile Materials of Ministry of Education College of Materials Science and EngineeringJilin UniversityChangchun130025China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry Jilin UniversityChangchun130012China

Amplifying the intrinsic wettability of substrate material by changing the solid/liquid contact area is considered to be the main mechanism for controlling the wettability of rough or structured *** theoretical analysis and experimental exploration,we have found that in addition to this wettability structure amplification effect,the surface structure also simultaneously controls surface wettability by regulating the wetting state via changing the threshold Young angles of the Cassie-Baxter and Wenzel wetting *** wetting state regulation effect provides us with an alternative strategy to overcome the inherent limitation in surface chemistry by tailoring surface *** wetting state regulation effect created by multi-scale hierarchical structures is quite significant and plays is a crucial role in promoting the superhydrophobicity,superhydrophilicity and the transition between these two extreme wetting properties,as well as stabilizing the Cassie-Baxter superhydrophobic state on the fabricated lotus-like hierarchically structured Cu surface and the natural lotus leaf.

关键词： Hierarchical structure Wetting state regulation Wetting transition Superhydrophobicity Superhydrophilicity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Selective‑Response Hypersensitive Bio‑Inspired Strain Sensor Enabled by Hysteresis Effect and Parallel Through‑Slits Structures

引用

Nano-Micro Letters 2024年第2期16卷 139-153页

作者： Qun Wang Zhongwen Yao Changchao Zhang Honglie Song Hanliang Ding Bo Li Shichao Niu Xinguan Huang Chuanhai Chen Zhiwu Han luquan ren Key Laboratory of Bionic Engineering(Ministry of Education) Jilin UniversityChangchunJilin 130022People’s Republic of China Liaoning Academy of Materials LiaoningShenyang 110167People’s Republic of China Key Laboratory of CNC Equipment Reliability(Ministry of Education) Jilin UniversityChangchunJilin 130022People’s Republic of China

Flexible strain sensors are promising in sensing minuscule mechanical signals,and thereby widely used in various advanced ***,the effective integration of hypersensitivity and highly selective response into one flexible strain sensor remains a huge ***,inspired by the hysteresis strategy of the scorpion slit receptor,a bio-inspired flexible strain sensor(BFSS)with parallel through-slit arrays is designed and ***,BFSS consists of conductive monolayer graphene and viscoelastic styrene–isoprene–styrene block *** the synergistic effect of the bio-inspired slit structures and flexible viscoelastic materials,BFSS can achieve both hypersensitivity and highly selective frequency ***,the BFSS exhibits a high gage factor of 657.36,and a precise identification of vibration frequencies at a resolution of 0.2 Hz through undergoing different morphological changes to high-frequency vibration and low-frequency ***,the BFSS possesses a wide frequency detection range(103 Hz)and stable durability(1000 cycles).It can sense and recognize vibration signals with different characteristics,including the frequency,amplitude,and *** work,which turns the hysteresis effect into a"treasure,"can provide new design ideas for sensors for potential applications including human–computer interaction and health monitoring of mechanical equipment.

关键词： Bio-inspired strain sensors Hysteresis effect Hypersensitivity Selective frequency response Health monitoring applications

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design of bionic water jet thruster with double-chamber driven by electromagnetic force

引用

International Journal of Mechanical System Dynamics 2024年第3期4卷 292-302页

作者： Chong Cao Yasong Zhang Chengchun Zhang Chun Shen Wen Cheng Zhenjiang Wei Zhengyang Wu luquan ren Key Laboratory of Bionic Engineering(Ministry of Education) Jilin UniversityChangchunChina Weihai Junming Power Technology Co.Ltd. WeihaiChina

In response to the limitations of the single-chamber water jet thruster used in underwater vehicles mimicked by natural cephalopods,a novel approach involving a double-chamber water jet thruster has been *** thruster utilizes electromagnetic force to manipulate the diaphragm,thereby altering the volume of the upper and lower chambers to achieve water jet *** investigations were conducted to determine the tensile length-force characteristics of the diaphragm made of ***,key parameters of essential propulsion components,such as solenoid coils,electromagnets,and currents,were established based on the tensile length-force curve,and the propulsion capabilities of the system were evaluated through theoretical *** assessments indicate that the system does not produce reverse thrust regardless of whether the coil moves up or *** experimental results demonstrate that the maximum peak propulsion force generated by the dual-chamber water jet thruster within a 3-s cycle is 0.253N.

关键词： water jet thruster diaphragm electromagnetic force

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Restudies on Body Surface of Dung Beetle and Application of Its Bionics Flexible Technique

引用

Journal of Bionic Engineering 2004年第1期1卷 53-60页

作者： Jiurong Sun 1, Jianqiao Li 2, Hong Cheng 1, Zhendong Dai 3, luquan ren 2 1.College of Life Sciences, Peking University, Beijing, 100871,P.R. China 2.Key Laboratory of Terrain-Machine Bionics Engineering (Ministry of Education,China), Jilin University at Nanling Campus, Changchun, 130022,P.R.China 3.College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016,P.R.China College of Life Sciences Peking University Beijing 100871P.R. China Key Laboratory of Terrain-Machine Bionics Engineering Ministry of Education China Jilin University at Nanling Campus Changchun 130022 P. R. China College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and Astronautics Nanjing 210016 P. R. China

A scanning electron microscope was used to observe the structures of the setae on the surface of a dung beetle Copris ochus, Motschulsky. There are lots of setae on the body surface, especially on the ventral part surface and lateral to the legs which are different in size, arrangement and shape. These setae have different lengths and many thorns on the whole seta. The top ends of these setae stand up without furcations which direct uprightly towards the surface of the touched soil. By the method of removing these setae, getting the insect weight before and after digging into the dung we affirm farther that the setae on the beetle body surface form the anti-stick and non-adherent gentle interface. The soil machines and components made by imitating the gentle body surface of beetles have favorable non-adherent results.

关键词： dung beetle seta flexible surface scanning electron microscopy bionics soil adhesion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on Camshaft Treated by Bionic Laser Melting Process in Aqueous Media Cooling

Study on Camshaft Treated by Bionic Laser Melting Process in...

引用

The 3rd International Conference of Bionic Engineering(ICBE’10)

作者： Yu Zhao 1 2 Dongxue Song 1 luquan ren 2 Li Chen 1 2 1 Key Laboratory of Advanced Structrural Materials Ministry of Education Changchun University of Techology Changchun 130012 China 2 Key Laboratory of Bionic Engineering (Jilin University) Ministry of Education P.R.China

Biomimetic coupling wear resistance model was created according to biomimetic coupling phenomenon and biomimetic coupling theory. The model utilize the preparation of aqueous media by laser cooling techniques and process biological coupling unit on the gray cast iron surface according to the organism form. The bionic coupled unit is made in accordance with the laws of organism combination and a bionic coupling surface which is similar to the organism form is produced with material surface which can improve the wear resistance of the camshaft. Studies show that the region treated with aqueous media by laser can get small grains with uniform size. The hardness and wear resistance is improved.

关键词： Bionic coupling Laser melting Camshaft

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

New advances in biomimetic surface

引用

Science China(Technological Sciences) 2016年第10期59卷 1619-1620页

作者： ren luquan Key Laboratory of Bionic Engineering Ministry of Education Jilin University

Anti-adhesion is a common phenomenon in living organisms, which is the evolution results to adapt their living surroundings. From the perspective of surface type, there are two typical anti-adhesion mechanisms： micro- and nano- surface structures and liquid-covered surface. Many living organisms possess one or two of these anti-adhesion surfac- es in order to achieve superior anti-adhesion, for example, soil animals like mole cricket and earthworm [1]. Carnivo- rous pitcher plant Nepenthes can capture and digest insects to meet the fundamental nutrients needs. When the insects crawl on its slippery peristome, they could easy-sliding into the picher, known as ＂aquaplaning＂. Wong et al. [2] at Harvard University has designed and fabricated slippery surface mimicking this slippery mechanism in Nepenthes, the results of which was published in Nature. However, questions remain about the mechanism underlying its func- tion, especially for the liquid film formation mechanism.

关键词： Biomimetics Hydrophilicity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biomechanics of Musculoskeletal System and Its Biomimetic Implications： A Review

引用

Journal of Bionic Engineering 2014年第2期11卷 159-175页

作者： Lei ren Zhihui Qian luquan ren School of Mechanical Aerospace and Civil Engineering University of Manchester Manchester M13 9PL UK Key Laboratory of Bionic Engineering (Ministry of Education China) Jilin University Changchun 130022 P. R. China

Biological musculoskeletal system （MSK）, composed of numerous bones, cartilages, skeletal muscles, tendons, ligaments etc., provides form, support, movement and stability for human or animal body. As the result of million years of selection and evolution, the biological MSK evolves to be a nearly perfect mechanical mechanism to support and transport the human or animal body, and would provide enormously rich resources to inspire engineers to innovate new technology and methodology to develop robots and mechanisms as effective and economical as the biological systems. This paper provides a general review of the current status of musculoskeletal biomechanics studies using both experimental and computational methods. This includes the use of the latest three-dimensional motion analysis systems, various medical imaging modalities, and also the advanced rigid-body and continuum mechanics musculoskeletal modelling techniques. Afterwards, several representative biomimetic studies based on ideas and concepts inspired from the structures and biomechanical functions of the biological MSK are dis- cussed. Finally, the major challenges and also the future research directions in musculoskeletal biomechanics and its biomimetic studies are proposed.

关键词： musculoskeletal system biomechanics multi-scale biomimetics biologically inspired robots and mechanisms

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：