检索结果-南通市图书馆

Fracture sealing performance of granular lost circulation materials at elevated temperature:A theoretical and coupled CFD-DEM simulation study

引用

Petroleum Science 2024年第1期21卷 567-581页

作者： Chong Lin Qi-Cong Xu Lie-Xiang Han Gao Li Hai He hong-ling zhou Ji-Ping She CCDC Drilling&Production Technology Research Institute Guanghan618300SichuanChina State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina College of Materials Science and Engineering Chongqing UniversityChongqing400044China State Key Lab of Oil and Gas Reservoir Geology and Exploitation(Chengdu University of Technology) Chengdu610059SichuanChina College of Energy Chengdu University of TechnologyChengdu610059SichuanChina

Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)*** circulation material(LCM)is a regular preventive and remedial measure for lost ***,conventional LCMs seem ineffective in high-temperature *** may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature *** understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in *** summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling *** conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing *** results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid ***,softer,and less frictional LCM particles have lower bridging probability and slower bridging *** particles tend to form dual-particle bridges rather than single-particle *** result in a deeper,tighter,but unstable sealing *** drilling fluid viscosity leads to faster and shallower sealing zones.

关键词： Geothermal well drilling HTHP formationLost circulation material CFD-DEM Fracture sealing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two Monte Carlo-based simulators for imaging-system modeling and projection simulation of flat-panel X-ray source

引用

Nuclear Science and Techniques 2024年第7期35卷 31-46页

作者： Meng-Ke Qi Ting He Yi-Wen zhou Jing Kang Zeng-Xiang Pan Song Kang Wang-Jiang Wu Jun Chen ling-hong zhou Yuan Xu School of Biomedical Engineering Southern Medical UniversityGuangzhou510515China State Key Laboratory of Optoelectronic Materials and Technologies Guangdong Province Key Laboratory of Display Material and TechnologySchool of Electronics and Information TechnologySun Yat-sen UniversityGuangzhou510275China Department of Radiotherapy Guangdong Provincial People’s Hospital(Guangdong Academy of Medical Sciences)Southern Medical UniversityGuangzhou510515China

The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging *** imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in *** conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection ***,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in *** study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)*** two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the ***-system modeling was performed by modeling the FPXS,imaging geometry,and *** gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence *** entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were *** accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation *** results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.

关键词： Flat-panel X-ray source(FPXS) Imaging-system modeling Projection simulation Monte Carlo-based simulators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

低价锆氧化物Zr_(3)O的结构、热力学和弹性性质第一性原理研究

引用

Transactions of Nonferrous Metals Society of China 2024年第3期34卷 952-965页

作者：周虹伶陈莉君杨晓玲刘许旸孙超栾佰峰重庆大学材料科学与工程学院轻合金材料国际合作联合实验室沈阳材料科学国家研究中心重庆400044 重庆大学航空航天学院重庆400044 中国核动力研究设计院反应堆燃料及材料重点实验室成都610213 重庆大学机械传动国家重点实验室重庆400044

采用第一性原理系统地研究3种Zr_(3)O晶形(空间群分别为R3c(斜方六面体)、R32(斜方六面体)和P6322(六面体))的晶格动力学及其与温度相关的热力学和力学性质。计算得到的3种Zr_(3)O晶形的晶体结构参数与实验结果一致。此外,证明3种Zr_(3)... 详细信息

采用第一性原理系统地研究3种Zr_(3)O晶形(空间群分别为R3c(斜方六面体)、R32(斜方六面体)和P6322(六面体))的晶格动力学及其与温度相关的热力学和力学性质。计算得到的3种Zr_(3)O晶形的晶体结构参数与实验结果一致。此外,证明3种Zr_(3)O结构在动力学和热力学上均具有稳定性。获得了3种Zr_(3)O晶形在0~1500 K温度范围内的熵、焓、吉布斯自由能、比热容、热膨胀系数和弹性模量等性质。发现3种Zr_(3)O晶形在0K时的相对稳定性顺序为Zr_(3)O(R3c)>Zr_(3)O(R32)>Zr_(3)O(P6_(3)22);然而,在50 K时Zr_(3)O(R3c)转变成Zr_(3)O(R32),在540K时转变为Zr_(3)O(P6_(3)22)。相较于其他2种Zr_(3)O相,Zr_(3)O(R32)表现出更优越的力学性能。

关键词：第一性原理 Zr_(3)O 晶格动力学热力学性质弹性模量

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of sintering temperature on the microstructure and properties of foamed glass-ceramics prepared from high-titanium blast furnace slag and waste glass

引用

International Journal of Minerals,Metallurgy and Materials 2017年第8期24卷 931-936页

作者： Chang-hong Chen Ke-qin Feng Yu zhou hong-ling zhou School of Manufacturing Science and Engineering Sichuan University

Foamed glass-ceramics were prepared via a single-step sintering method using high-titanium blast furnace slag and waste glass as the main raw materials The influence of sintering temperature(900–1060℃) on the microstructure and properties of foamed glass-ceramics was studied. The results show that the crystal shape changed from grainy to rod-shaped and finally turned to multiple shapes as the sintering temperature was increased from 900 to 1060℃. With increasing sintering temperature, the average pore size of the foamed glass-ceramics increased and subsequently decreased. By contrast, the compressive strength and the bulk density decreased and subsequently increased. An excessively high temperature, however, induced the coalescence of pores and decreased the compressive strength. The optimal properties, including the highest compressive strength(16.64 MPa) among the investigated samples and a relatively low bulk density(0.83 g/cm^3), were attained in the case of the foamed glass-ceramics sintered at 1000℃.

关键词： foamed glass-ceramics sintering temperature blast furnace slag waste glass crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of CeO_2 addition on the preparation of foamed glass-ceramics from high-titanium blast furnace slag

引用

International Journal of Minerals,Metallurgy and Materials 2018年第6期25卷 689-695页

作者： hong-ling zhou Ke-qin Feng Chang-hong Chen Zi-di Yan School of Manufacturing Science and Engineering Sichuan University

Foamed glass-ceramics doped with cerium oxide（CeO_2）were successfully prepared from high-titanium blast furnace slag by one-step *** influence of CeO_2 addition（1.5wt%–3.5wt%）on the crystalline phases,microstructure,and properties of foamed glass-ceramics was *** show that CeO_2 improves the stability of the glass phase and changes the two-dimensional crystallization mechanism into three-dimensional *** analysis indicates the presence of Ca（Mg,Fe）Si_2O_6 and Ca（Ti,Mg,Al）（Si,Al）_2O_（6 ）in all sintered *** with CeO_2,Ti CeO_4 precipitates,and crystallinity increases,leading to increased thickness of pore walls and uniform *** comprehensive properties of foamed glass-ceramics are better than that of samples without CeO_*** particular,the sample added with a suitable amount of CeO_2（2.5wt%）exhibits bulk density that is similar to and compressive strength（14.9 MPa）that is more than twice of foamed glass-ceramics without CeO_2.

关键词： foamed glass-ceramics cerium oxide blast furnace slag sintering crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of aluminium nitride as a foaming agent on the preparation of foam glass-ceramics from high-titanium blast furnace slag

引用

International Journal of Minerals,Metallurgy and Materials 2016年第5期23卷 595-600页

作者： Huan Shi Ke-qin Feng Hai-bo Wang Chang-hong Chen hong-ling zhou School of Manufacturing Science and Engineering Sichuan University Chengdu 610065 China School of Materials Engineering Panzhihua College Panzhihua 617000 China

To effectively reuse high-titanium blast furnace slag （TS）, foam glass-ceramics were successfully prepared by powder sintering at 1000℃. TS and waste glass were used as the main raw materials, aluminium nitride （AIN） as the foaming agent, and borax as the fluxing agent. The influence of the amount of A1N added （lwt%-5wt%） on the crystalline phases, microstructure, and properties of the produced foam glass-ceramics was studied. The results showed that the main crystal phases were perovskite, diopside, and augite. With increasing A1N content, a transformation from diopside to augite occurred and the crystallinity of the pyroxene phases slightly decreased. Initially, the aver- age pore size and porosity of the foam glass-ceramics increased and subsequently decreased; similarly, their bulk density and compressive strength decreased and subsequently increased. The optimal properties were obtained when the foam glass-ceramics were prepared by adding 4wt% AIN.

关键词： blast furnace slag aluminium nitride powder sintering foam glass-ceramics crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Structural parameter optimization of a furrow opener based on EDEM software

引用

International Journal of Agricultural and Biological Engineering 2024年第3期17卷 115-120页

作者： Longjie Wang Bin zhou Chang Wan ling zhou College of Mechanical and Electrical Engineering Tarim UniversityAlar 843300XinjiangChina Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region Alar 843300XinjiangChina Xinjiang Production and Construction Corps(XPCC)Key Laboratory of Utilization and Equipment of Special Agricultural and Forestry Products in Southern Xinjiang Alar 843300XinjiangChina

To reduce the ditching resistance of a furrow opener during operation,single-factor and multiple-factor combinations were used to explore the influence of the furrow opener’s advance speed,blade opening angle,and width on the ditching resistance based on the discrete element method(DEM).A DEM simulation of the furrow opener was *** changing these influencing factors,the parameters with the least resistance to operation were *** openers were fabricated according to the optimized results,and soil trench tests were carried *** and soil groove tests showed that the minimum ditching resistance was 58.54 N when the current advance speed was 4.47 m/s,the blade opening angle was 32.02°,and the furrow opener width was 51.45 *** error between the simulated value of the ditching resistance and the soil trench test was within 10%,and the trends of resistance change were essentially the same,indicating that it is feasible to optimize the structural parameters of a trench furrow opener using *** research results can provide a reference for the parameter optimization of furrow openers.

关键词： furrow opener discrete element optimization ditching resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tomographic particle image velocimetry measurement on three-dimensional swirling flow in dual-stage counter-rotating swirler

引用

Chinese Journal of Aeronautics 2024年第3期37卷 7-20页

作者： Yuyang zhou ling DONG Mingtao SHANG Jibao LI Akira RINOSHIKA Key Laboratory of Fluid Mechanics of Ministry of Education Beihang UniversityBeijing 100191China School of Mechanical and Automotive Engineering Shanghai University of Engineering ScienceShanghai 201620China AECC Commercial Aircraft Engine Co. Ltd.Shanghai 200241China Department of Mechanical Systems Engineering Yamagata UniversityYamagata 992-8510Japan

Three-Dimensional(3D)swirling flow structures,generated by a counter-rotating dualstage swirler in a confined chamber with a confinement ratio of 1.53,were experimentally investigated at Re=2.3×10^(5)using Tomographic Particle Image Velocimetry(Tomo-PIV)and planar Particle Image Velocimetry(PIV).Based on the analysis of the 3D time-averaged swirling flow structures and 3D Proper Orthogonal Decomposition(POD)of the Tomo-PIV data,typical coherent flow structures,including the Corner Recirculation Zone(CRZ),Central Recirculation Zone(CTRZ),and Lip Recirculation Zone(LRZ),were *** counter-rotating dual-stage swirler with a Venturi flare generates the independence process of vortex breakdown from the main stage and pilot stage,leading to the formation of an LRZ and a smaller CTRZ near the nozzle *** confinement squeezes the CRZ to the corner and causes a reverse rotation flow to limit the shape of the CTRZ.A large-scale flow structure caused by the main stage features an explosive breakup,flapping,and Precessing Vortex Core(PVC).The explosive breakup mode dominates the swirling flow structures owing to the expansion and construction of the main jet,whereas the flapping mode is related to the wake *** limits the expansion of PVC and causes it to contract after the impacting area.

关键词： Coherent structures Dual-stage counter-rotating swirler cup Precessing vortex core Proper orthogonal decomposition Swirling flow Tomographic particle image velocimetry

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

LncRNA HCP5-encoded protein contributes to adriamycin resistance through ERK/mTOR pathway-mediated autophagy in breast cancer cells

引用

Genes & Diseases 2024年第4期11卷 69-72页

作者： Jia-Ni Xing Yi-Ni Shang Zheng-ling Yu Shun-Heng zhou Wang-Yang Chen Li-hong Wang Department of Pathophysiology Medical College of Southeast UniversityNanjingJiangsu 210009China Department of Biomedical Engineering Nanjing University of Aeronautics and AstronauticsNanjingJiangsu 211106China School of Medicine Taizhou UniversityTaizhouZhejiang 318000China Jiangsu Provincial Key Laboratory of Critical Care Medicine NanjingJiangsu 210009China

Adriamycin(ADR),also known as doxorubicin,is an anthracycline anticancer drug and a chemotherapeutic drug commonly used in breast cancer treatments.1 However,breast cancer patients can gradually become tolerant to ***,improving the curative effect of ADR remains an urgent problem to be *** is a complex catabolic process;normal living cells break down damaged organelles or aggregated molecules and absorb energy to maintain homeostasis through autophagy.

关键词： breast cancer homeostasis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Positive definiteness of real quadratic forms resulting from the variable-step L1-type approximations of convolution operators

引用

Science China Mathematics 2024年第2期67卷 237-252页

作者： hong-Lin Liao Tao Tang Tao zhou School of Mathematics Nanjing University of Aeronautics and AstronauticsNanjing 211106China Division of Science and Technology BNU-HKBU United International CollegeZhuhai 519087China SUSTech International Center for Mathematics Shenzhen 518055China NCMIS&LSEC Institute of Computational Mathematics and Scientific/Engineering ComputingAcademy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190China

The positive definiteness of real quadratic forms with convolution structures plays an important rolein stability analysis for time-stepping schemes for nonlocal operators. In this work, we present a novel analysistool to handle discrete convolution kernels resulting from variable-step approximations for convolution *** precisely, for a class of discrete convolution kernels relevant to variable-step L1-type time discretizations, weshow that the associated quadratic form is positive definite under some easy-to-check algebraic conditions. Ourproof is based on an elementary constructing strategy by using the properties of discrete orthogonal convolutionkernels and discrete complementary convolution kernels. To our knowledge, this is the first general result onsimple algebraic conditions for the positive definiteness of variable-step discrete convolution kernels. Using theunified theory, we obtain the stability for some simple nonuniform time-stepping schemes straightforwardly.

关键词： discrete convolution kernels positive definiteness variable time-stepping orthogonal convolution kernels complementary convolution kernels

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：