检索结果-南通市图书馆

Defence Technology（防务技术） 2024年第2期32卷 383-392页

作者： li Ding Chong Wan Suhang Chen Zhao qin Kangzhen Xu School of Chemical Engineering/Xi'an Key Laboratory of Special Energy Materials Northwest UniversityXi'an710069China Xi’an Modern Chemistry Research Institute Xi'an710065China

To enhance the catalytic activity of copper ferrite(CuFe_(2)O_(4))nanoparticle and promote its application as combustion catalyst,a low-cost silicon dioxide(SiO_(2))carrier was employed to construct a novel CuFe_(2)O_(4)/SiO_(2)binary composites via solvothermal *** phase structure,morphology and catalytic activity of CuFe_(2)O_(4)/SiO_(2)composites were studied firstly,and thermal decomposition,combustion and safety performance of ammonium perchlorate(AP)and 1,3,5-trinitroperhydro-1,3,5-triazine(RDX)with it affecting were then systematically *** results show that CuFe_(2)O_(4)/SiO_(2)composite can remarkably either advance the decomposition peak temperature of AP and RDX,or reduce the apparent activation energy at their main decomposition ***,the flame propagation rate of RDX was promoted by about 2.73 times with SiO_(2)content of 3 wt%,and safety property of energetic component was also improved greatly,in which depressing the electrostatic discharge sensitivity of pure RDX by about 1.89 *** addition,the effective range of SiO_(2)carrier content in the binary catalyst is found to be 3 to 5 wt%.Therefore,SiO_(2)opens a new insight on the design of combustion catalyst carrier and will promote the application of CuFe_(2)O_(4)catalyst in solid propellant.

关键词： Copper ferrite Silicon dioxide Combustion catalyst Thermal decomposition Laser ignition

Growth and development of children in China:achievements,problems and prospects

在线全文

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第2期20卷 97-104页

作者： Xin-Nan Zong hui li Department of Growth and Development Capital Institute of PediatricsBeijing 100020China

Growth reflects the general condition of society,and is a measure of the nutritional and hygienic status of a population[1,2].Nutrition is one of the most important components of children’s well-being[3].The Chinese government attaches great importance to children’s health and development,with a clear statement and consistent practice for“Children are the future and hope of the motherland”.

关键词： mother statement children

Regio-and Stereoselective Polymerization of Bio-based Ocimene by Rare-Earth Metal Catalysts

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 223-229,I0008页

作者： Qi-Yuan Wang li-Peng Sang Zhen Zhang Yang Jiang hui Tian Xia Zhao Xiang Guo Shi-hui li State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun130022China School of Applied Chemistry and Engineering University of Science and Technology of ChinaHefei230026China Science and Technology on Aerospace Chemical Power Laboratory Hubei Institute of Aerospace ChemotechonologyXiangyang441003China Shanxi Coal Chemical Industry Technology Research Institute Xi’an710000China Hubei Institute of Aerospace Chemotechonology Xiangyang441003China

Coordination polymerization of renewable β-ocimene has been investigated using asymmetric diiminophosphinate lutetium complex1, β-diketiminate yttrium complex 2, bis(phosphino)carbazolide yttrium complex 3, half-sandwich benzyl fluorenyl scandium complex 4 and pyridyl-methylene-fluorenyl rare-metal complexes 5a–5c. Complexes 1, 4 and 5a–5c show trans-1,2-regioselectivities and high activities, of which 5c exhibits excellent isoselectivity(mmmm>99%). Conversely, complexes 2 and 3 promote β-ocimene polymerization to produce isotactic cis-1,4-polyocimenes(cis-1,4>99%, mm>95%). Diblock copolymers cis-1,4-PIP-block-cis-1,4-POc and cis-1,4-PBD-block-cis-1,4-POc are obtained in one-pot reactions of β-ocimene with isoprene and butadiene using complex 3. Epoxidation and hydroxylation of polyocimene afford functionalized polyolefins with enhanced T_(g)(from-20 ℃ to 79 ℃ and 74 ℃) and hydrophilicity.

关键词： Biobased monomer Terpenes Ocimene Rare-earths Polymerization Regio/stereoselectivity Elastomer

Weyl Type Theorem for Bounded linear Operator and Its Functional Calculus

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 528-536页

作者： Gao hui Zi FENG Peng Tong li School of Mathematics Nanjing University of Aeronautics and AstronauticsNanjing 210016P.R.China

Let H be a complex infinite dimensional Hilbert space and B(H)be the algebra of all bounded linear operators on *** this paper,we mainly study the operators that satisfy both a-Weyl's theorem and property(R).Also,the operators whose functional calculus satisfies the two properties are also *** give the features for the operator or its functional calculus for which both a-Weyl's theorem and property(R)hold.

关键词： a-Weyl's theorem property(R) functional calculus

Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 726-741页

作者： Yingzong liu Yuanxing li hui Chen Zongtao Zhu Key Laboratory of Advanced Technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031PR China

Magnesium and aluminum alloys are widely used in various industries because of their excellent properties,and their reliable connection may increase application of *** compounds(IMCs)affect the joint performance of Mg/*** this study,AZ31 Mg alloy with/without a nickel(Ni)coating layer and 6061 Al alloy were joined by ultrasonic-assisted soldering with Sn-3.0Ag-0.5Cu(SAC)*** effects of the Ni coating layer on the microstructure and mechanical properties of Mg/Al joints were systematically *** Ni coating layer had a significant effect on formation of the Mg_(2)Sn IMC and the mechanical properties of Mg/Al *** blocky Mg_(2)Sn IMC formed in the Mg/SAC/Al joints without a Ni coating *** content of the Mg_(2)Sn IMC increased with increasing soldering temperature,but the joint strength *** joint without a Ni coating layer fractured at the blocky Mg_(2)Sn IMC in the solder,and the maximum shear strength was 32.2 *** pre-plating Ni on the Mg substrate,formation of the blocky Mg_(2)Sn IMC was inhibited in the soldering temperature range 240–280℃and the joint strength ***,when the soldering temperature increased to 310℃,the blocky Mg_(2)Sn IMC precipitated again in the *** electron microscopy showed that some nano-sized Mg_(2)Sn IMC and the(Cu,Ni)_(6)Sn_(5)phase formed in the Mg(Ni)/SAC/Al joint soldered at 280℃,indicating that the Ni coating layer could no longer prevent diffusion of Mg into the solder when the soldering temperature was higher than 280℃.The maximum shear strength of the Mg(Ni)/SAC/Al joint was 58.2 MPa for a soldering temperature of 280℃,which was 80.7%higher than that of the Mg/SAC/Al joint,and the joint was broken at the Mg(Ni)/SAC ***-plating Ni is a feasible way to inhibit formation of IMCs when joining dissimilar metals.

关键词： Ultrasonic-assisted soldering Mg_(2)Sn Ni coating layer Shear strength

Development of CONTHAC-3D and hydrogen distribution analysis of HPR1000

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第2期35卷 210-221页

作者： hui Wang Jing-Jing li Yuan Chang Gong-lin li Ming Ding China Nuclear Power Engineering Co.LTD. Beijing 100084China Fundamental Science on Nuclear Safety and Simulation Technology Laboratory Harbin 100049China

An in-house code,CONTHAC-3D,was developed to calculate and analyze thermal-hydraulic phenomena in containments during severe ***-3D is a three-dimensional computational fluid dynamics code that can be applied to predict gas flow,diffusion,and steam condensation in a containment during a severe hypothetical accident,as well as to obtain an estimate of the local hydrogen concentration in various zones of the ***-3D was developed using multiple models to simulate the features of the proprietary systems and equipment of HPR1000 and ACP100,such as the passive cooling system,passive autocatalytic recombiners and the passive air cooling *** validate CONTHAC-3D,a GX6 test was performed at the Battelle Model Containment *** hydrogen concentration and temperature monitored by the GX6 test are accurately predicted by ***,the hydrogen distribution in the HPR1000 containment during a severe accident was *** results show that the hydrogen removal rates calculated using CONTHAC-3D for different types of PARs agree well with the theoretical values,with an error of less than 1%.As the accident progresses,the hydrogen concentration in the lower compartment becomes higher than that in the large space,which implies that the lower compartment has a higher hydrogen risk than the dome and large space at a later stage of the *** amount of hydrogen removed by the PARs placed on the floor of the compartment is small;therefore,raising the installation height of these recombiners appropriately is ***,we do not recommend installing all autocatalytic recombiners at high *** study findings in regard to the hydrogen distribution in the HPR1000 containment indicate that CONTHAC-3D can be applied to the study of hydrogen risk containment.

关键词： Hydrogen risk mitigation Pressurized water reactor HPR1000 Thermal hydraulic CONTHAC-3D

Uniqueness on Difference Operators of Meromorphic Functions of Infinite Order

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 511-527页

作者： hui li Ming liang FANG Xiao YAO School of Science China University of Mining and TechnologyBeijing 100083P.R.China Institute of Mathematics Academy of Mathematics and System SciencesChinese Academy of SciencesBeijing 100190P.R.China School of Sciences Hangzhou Dianzi UniversityHangzhou 310012P.R.China School of Mathematical sciences and LPMC Nankai UniversityTianjin 300071P.R.China

We investigate the uniqueness problems of meromorphic functions and their difference operators by using a new *** is proved that if a non-constant meromorphic function f shares a non-zero constant and ∞ counting multiplicities with its difference operators Δcf(z) and Δ_(c)^(2)f(z), thenΔcf(z)≡Δ_(c)^(2)f(z).In particular,we give a difference analogue of a result of *** method has two distinct features:(ⅰ) It converts the relations between functions into the corresponding *** makes it possible to deal with the uniqueness problem by linear algebra and combinatorics.(ⅱ) It circumvents the obstacle of the difference logarithmic derivative lemma for meromorphic functions of infinite order,since this method does not depend on the growth of the ***,the idea in this paper can also be applied to the case for several variables.

关键词： Uniqueness meromorphic functions difference operators infinite order

Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 725-736页

作者： hui Wang Yidi li Ming Zhang Wei Gong Ruilin Lai Yunping li State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Research Institute of light Alloy Central South UniversityChangsha 410083China

Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five *** this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were *** evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy *** results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate ***,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume *** preheating conditions,the UTS and elongation were positively correlated with rotation *** the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired *** UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.

关键词： additive friction stir deposition structural repair tool rotation speed Al alloy

Comparison of nonlinear modeling methods for the composite rubber clamp

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 763-778页

作者： Yiming CAO hui MA Xumin GUO Bingfeng ZHAO hui li Xin WANG Bing WANG School of Mechanical Engineering and Automation Northeastern UniversityShenyang 110819China Key Laboratory of Vibration and Control of Aero-Propulsion Systems of Ministry of Education of China Northeastern UniversityShenyang 110819China AVIC Shenyang Engine Design Institute Shenyang 110013China Dalian Mengyu Machinery Co. Ltd.Dalian 116317Liaoning ProvinceChina

The cubic stiffness force model(CSFM)and Bouc-Wen model(BWM)are introduced and compared *** unknown coefficients of the nonlinear models are identified by the genetic algorithm combined with *** fitting the identified nonlinear coefficients under different excitation amplitudes,the nonlinear vibration responses of the system are *** results show that the accuracy of the BWM is higher than that of the CSFM,especially in the non-resonant ***,the optimization time of the BWM is longer than that of the CSFM.

关键词： pipeline system nonlinear clamp model composite rubber clamp amplitude-dependent characteristic vibration response experiment

Socioeconomic inequalities in cancer incidence and mortality:An analysis of GLOBOCAN 2022

在线全文

学校读者我要写书评

暂无评论

Chinese Medical Journal 2024年第12期137卷 1407-1413页

作者： Wei Cao Kang qin Feng li Wanqing Chen Office of Cancer Screening National Cancer Center/National Clinical Research Center for Cancer/Cancer HospitalChinese Academy of Medical Sciences and Peking Union Medical CollegeBeijing 100021China Hangzhou Center for Disease Control and Prevention HangzhouZhejiang 310021China The Third People’s Hospital of Xiaoshan HangzhouZhejiang 311251China

Background:Given the recent updates in cancer burden estimates by GLOBOCAN 2022,this study was undertaken to provide pertinent perspectives within the context of the Human Development Index(HDI)and major world ***:Datasets sourced from GLOBOCAN encompassed cancer cases and deaths across all cancer types in 2022,alongside projections up to *** incidences and deaths of the top 10 cancers within China and four distinct HDI-classified regions were compared using descriptive ***-standardized incidence rates(ASIRs)and mortality rates(ASMRs)worldwide for the most prevalent cancers in 2022 across ten largest economies and four-tier HDIs were *** top five cancer types concerning both incidence and mortality in China were delineated by sex and age ***:In males,prostate cancer predominated in countries with low,high(except China),and very high *** and liver cancers were prominent causes of death in countries with low *** females,breast and cervical cancers predominated in countries with low-to-medium *** and colorectal cancer incidence and deaths increased with high HDI for both *** and ASMRs for breast,prostate,lung,and colorectal cancers in the top 10 economies were higher than the global ***,liver,stomach,and cervical cancers in most Western countries exhibited lower *** China,hematologic malignancies(43%)were prevalent among children aged 0-14 years,whereas thyroid cancer led among adolescents and young adults aged 15-39 *** incidence and mortality,lung cancer predominated for individuals over 40 years,except for females aged 40-59 years,in whom breast cancer *** trends indicated substantial increases in new cancer cases(76.6%)and deaths(89.7%)over the next three ***:Infection-and poverty-related cancer burdens are offset by increased prostate,breast,colorectal,and lung cancer incidence associated with rapid societal and economic transi

关键词： Incidence Mortality Tumor burden China Human Development Index Hematologic neoplasms Lung neoplasms Breast neoplasms Colorectal neoplasms Thyroid neoplasms liver neoplasms Prostatic neoplasms Early detection of cancer