检索结果-南通市图书馆

Rare Metals 2024年第8期43卷 3893-3903页

作者： Jaesoung Lee Seulgi kim Taehyun Kwon Young ii kim Suyeon kim Sung Ho Song Bin Lee Dongju Lee Department of Urban Energyand Environmental Engineering Chungbuk National University Division of Advanced Materials Engineering Kongju National University Department of Advanced Materials Engineering for Information and Electronics Integrated-Education Institute for Frontier Science and Technology (BK21 Four)Kyung Hee University

The CoCrFeMnNi high-entropy alloys(HEAs)with a(face-centered cubic) FCC structure has garnered considerable attention for its exceptional ductility and strain hardening ***,its yield strength is insufficient for structural *** this study,strengthening mechanisms in these HEAs were investigated to gain insight into the mechanical properties according to alloy powder ***,we present a novel approach to achieve both high strength and high ductility through the creation of a bimodal structure consisting of both coarse and fine grains via gas atomization and spark plasma sintering processes.A bimodally structured HEA prepared with a mass ratio of 2:8 between coarse particles(75-106 μm) and fine particles(≤25 μm)yielded optimal results,with a strength of 491.95 MPa and elongation of 19.64%.This strength value represents an～41% increase compared with the sample that displayed a fine single microstructure(347.08 MPa for yield strength).The strength enhancement was attributed to the prevention of plastic deformation initiation from the fine particles during *** innovative approach to the creation of HEAs with bimodal structures shows promise for various applications,such as structural components that require a combination of high strength and high ductility.

关键词： High-entropy alloys CrCoFeMoNi Bimodal Gas atomization Mechanical properties

Artificial intelligence in physiological characteristics recognition for internet of things authentication

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第3期10卷 740-755页

作者： Zhimin Zhang Huansheng Ning Fadi Farha Jianguo Ding kim-kwang Raymond Choo School of Computer and Communication Engineering University of Science and Technology BeijingBeijing100083China Beijing Engineering Research Center for Cyberspace Data Analysis and Applications Beijing100083China Faculty of Informatics Engineering Aleppo UniversityAleppoSyria Department of Computer Science Blekinge Institute of Technology37179KarlskronaSweden Department of Information Systems and Cyber Security University of Texas at San AntonioSan AntonioTX78249-0631USA

Effective user authentication is key to ensuring equipment security,data privacy,and personalized services in Internet of Things(IoT)***,conventional mode-based authentication methods(e.g.,passwords and smart cards)may be vulnerable to a broad range of attacks(e.g.,eavesdropping and side-channel attacks).Hence,there have been attempts to design biometric-based authentication solutions,which rely on physiological and behavioral *** characteristics need continuous monitoring and specific environmental settings,which can be challenging to implement in ***,we can also leverage Artificial Intelligence(AI)in the extraction and classification of physiological characteristics from IoT devices processing to facilitate ***,we review the literature on the use of AI in physiological characteristics recognition pub-lished after *** use the three-layer architecture of the IoT(i.e.,sensing layer,feature layer,and algorithm layer)to guide the discussion of existing approaches and their *** also identify a number of future research opportunities,which will hopefully guide the design of next generation solutions.

关键词： Physiological characteristics recognition Artificial intelligence Internet of things Biological-driven authentication

Network traffic classification:Techniques,datasets,and challenges

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第3期10卷 676-692页

作者： Ahmad Azab Mahmoud Khasawneh Saed Alrabaee kim-kwang Raymond Choo Maysa Sarsour College of Information Technology and Systems Victorian Institute of TechnologyAustralia College of Engineering Al Ain UniversityAbu DhabiUnited Arab Emirates Information Systems and Security College of ITUnited Arab Emirates UniversityAl Ain15551United Arab Emirates Department of Information Systems and Cyber Security University of Texas at San AntonioSan AntonioTX78260USA School of Photovoltaic and Renewable Energy Engineering University of New South WalesSydneyNSW2052Australia

In network traffic classification,it is important to understand the correlation between network traffic and its causal application,protocol,or service group,for example,in facilitating lawful interception,ensuring the quality of service,preventing application choke points,and facilitating malicious behavior *** this paper,we review existing network classification techniques,such as port-based identification and those based on deep packet inspection,statistical features in conjunction with machine learning,and deep learning *** also explain the implementations,advantages,and limitations associated with these *** review also extends to publicly available datasets used in the ***,we discuss existing and emerging challenges,as well as future research directions.

关键词： Network classification Machine learning Deep learning Deep packet inspection Traffic monitoring

Survey on digital twins for Internet of Vehicles:Fundamentals,challenges,and opportunities

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第2期10卷 237-247页

作者： Jiajie Guo Muhammad Bilal Yuying Qiu Cheng Qian Xiaolong Xu kim-kwang Raymond Choo School of Computer and Software Nanjing University of Information Science and TechnologyNanjing210044China Department of Computer Engineering Hankuk University of Foreign StudiesGyeonggi-do17035South Korea Jiangsu Hydraulic Research Institute Nanjing210044China Department of Information Systems and Cyber Security University of Texas at San AntonioSan AntonioTX78249-0631USA

As autonomous vehicles and the other supporting infrastructures(e.g.,smart cities and intelligent transportation systems)become more commonplace,the Internet of Vehicles(IoV)is getting increasingly *** have been attempts to utilize Digital Twins(DTs)to facilitate the design,evaluation,and deployment of IoV-based systems,for example by supporting high-fidelity modeling,real-time monitoring,and advanced predictive ***,the literature review undertaken in this paper suggests that integrating DTs into IoV-based system design and deployment remains an understudied *** addition,this paper explains how DTs can benefit IoV system designers and implementers,as well as describes several challenges and opportunities for future researchers.

关键词： Internet of vehicles Digital twin Simulation Traffic systems

Surface-functionalized hole-selective monolayer for high efficiency single-junction wide-bandgap and monolithic tandem perovskite solar cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 317-326,I0008页

作者： Devthade Vidyasagar Yeonghun Yun Jae Yu Cho Hyemin Lee Kyung Won kim Yong Tae kim Sung Woong Yang Jina Jung Won Chang Choi Seonu kim Rajendra Kumar Gunasekaran Seok Beom Kang kwang Heo Dong Hoe kim Jaeyeong Heo Sangwook Lee School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Materials Science and Engineering and Optoelectronics Convergence Research CenterChonnam National UniversityGwangju 61186Republic of Korea Department of Materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea Department of Nanotechnology and Advanced Materials Engineering Sejong UniversitySeoul 05006Republic of Korea

Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovskite solar cells(PSCs).Herein,we report a facile but powerful method to functionalize the surface of 2PACz-SAM,by which reproducible,highly stable,high-efficiency wide-bandgap PSCs can be *** 2PACz surface treatment with various donor number solvents improves assembly of 2PACz-SAM and leave residual surface-bound solvent molecules on 2PACz-SAM,which increases perovskite grain size,retards halide segregation,and accelerates hole *** surface functionalization achieves a high power conversion efficiency(PCE)of 17.62%for a single-junction wide-bandgap(~1.77 e V)*** also demonstrate a monolithic all-perovskite tandem solar cell using surfaceengineered HSC,showing high PCE of 24.66%with large open-circuit voltage of 2.008 V and high fillfactor of 81.45%.Our results suggest this simple approach can further improve the tandem device,when coupled with a high-performance narrow-bandgap sub-cell.

关键词： Perovskite solar cells 2PACz Monolithic tandem solar cells Wide bandgap

Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi kwang Chul Roh Do Youb kim Seung-Wan Song Department of Chemical Engineering&Applied Chemistry Chungnam National University Daejeon 34134Republic of Korea Energy Storage Materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea Advanced Energy Materials Research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

Submicron Ag-coated Cu particles as filler in sintering paste: Suppression of Ag dewetting and improvement of sinterability by surface modification using stearic acid

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2024年

作者： Yeongjung kim Yong-Sung Eom kwang-Seong Choi Jong-Hyun Lee Department of Materials Science and Engineering Seoul National University of Science and Technology 232 Gongneung-ro Low-Carbon Integration Tech Creative Research Section ETRI 218 Gajeong-ro Materials Research Institute for Future Convergence Seoul National University of Science and Technology 232 Gongneung-ro

Four types of submicron Ag-coated Cu particles with different Ag contents were prepared as sintering paste fillers， and the Ag contents of the particles were measured to be 10， 20， 30， and 40 wt%. Four types of particles （in order of increasing Ag content: A10， A20， A30， and A40） were surface-modified with stearic acid， to suppress the Ag shell dewetting and improve sinterability. The surface-modified particles were mixed with a polyol-based solvent to fabricate a resin-free paste. Subsequently， the pastes were screen-printed onto a slide glass and sintered at 250 ℃ in a nitrogen atmosphere for 1–10 min to form an electrode. The electrical resistivity of the sintered film as a function of sintering time was measured using a four-point probe. All the four surface-modified Cu@Ag particles with different Ag contents exhibited decreased electrical resistivity. Particularly， the largest difference in values after and before the surface modification was observed for A40 with the highest Ag content; the electrical resistivities of the initial and surface-modified particles were 1.51×10-4and 6.67×10-5Ω·cm， respectively， after sintering for 10 min. The findings of this study confirmed that the surface modification using stearic acid effectively suppressed the dewetting of the Ag shell and improved the sinterability of the submicron Cu@Ag particles.

关键词：

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： kwang Tae Son Chang Hee Cho Myoung Gyun kim Ji Woon Lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture

A Review of Rechargeable Zinc-Air Batteries:Recent Progress and Future Perspectives

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第7期16卷 358-401页

作者： Ghazanfar Nazir Adeela Rehman Jong-Hoon Lee Choong-Hee kim Jagadis Gautam kwang Heo Sajjad Hussain Muhammad Ikram Abeer AAlObaid Seul-Yi Lee Soo-Jin Park Department of Nanotechnology and Advanced Materials Engineering Hybrid Materials Research Center(HMC)Sejong UniversitySeoul 05006Republic of Korea Department of Chemical and Biomolecular Engineering Yonsei University50 Yonsei-RoSeodaemun-GuSeoul 03722Republic of Korea Department of Chemistry Inha UniversityIncheon 22212Republic of Korea Solar Cell Applications Research Lab Department of PhysicsGovernment College University LahoreLahore 54000 PunjabPakistan Department of Chemistry College of ScienceKing Saud UniversityP.O.Box 2455Riyadh 11451Saudi Arabia

Zinc-air batteries(ZABs)are gaining attention as an ideal option for various applications requiring high-capacity batteries,such as portable electronics,electric vehicles,and renewable energy *** offer advantages such as low environmental impact,enhanced safety compared to Li-ion batteries,and cost-effectiveness due to the abundance of ***,early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox *** advancements in restructuring the anode,utilizing alternative electrolytes,and developing bifunctional oxygen catalysts have significantly improved *** have achieved battery reversibility over thousands of cycles,introduced new electrolytes,and achieved energy efficiency records surpassing 70%.Despite these achievements,there are challenges related to lower power density,shorter lifespan,and air electrode corrosion leading to performance *** review paper discusses different battery configurations,and reaction mechanisms for electrically and mechanically rechargeable ZABs,and proposes remedies to enhance overall battery *** paper also explores recent advancements,applications,and the future prospects of electrically/mechanically rechargeable ZABs.

关键词： Zinc-air batteries Energy storage Affordability Reversibility

Changes in microorganisms and metabolites during long-term fermentation of commercially manufactured anchovy sauce

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年

作者： Daehyeon kim Seong-Eun Park Eun-Ju kim Seung-Ho Seo kwang-Moon Cho Sun Jae Kwon Hong-Seok Son Department of Biotechnology College of Life Sciences and Biotechnology Korea University Sonlab Inc. 3. AccuGene Inc.

This study was performed to investigate the changes in microbial communities and metabolites during the long-term fermentation of commercially manufactured anchovy sauce. Samples of commercial anchovy sauce were collected from large-scale fermentation tanks with fermentation periods of up to 7.87 years. The complex bacterial community was simplified to two genera， Tetragenococcus and Halanaerobium， after approximately 0.55 years of fermentation. Although genera， such as Saccharomyces， Cladosporium， Candida， and Aspergillus， were relatively dominant， no clear pattern was identified in fungal community analysis. The longitudinal metabolite profile demonstrated that approximately half (55.8%) of the metabolites present in anchovy sauce were produced within a year of fermentation due to rapid fermentation. Despite the static microbial community， the contents of several metabolites including amino acids and biogenic amines changed continuously during the long-term fermentation of anchovy sauce. This study provides novel insights into the changes in microbiota and metabolites in fish sauce produced without any starter inoculation.

关键词：