检索结果-南通市图书馆

Defence Technology（防务技术） 2019年第6期15卷 949-957页

作者： Pratim kumar Dr.K.N.Modi Institute of Engineering and Technology

Research and development of green oxidizers and green fuels as a possible replacement for ammonium perchlorate(NH4ClO4,AP) and hydrazine(N2H4) respectively has been increased considerably in the recent *** and hydrazine are the oxidizer and fuel entities,and used in solid and liquid rocket motors *** is highly toxic and led to adverse health effects,while hydrazine is carcinogenic in *** is in use from the last several decades for rocket and space shuttle propulsion,while hydrazine is used in upper stage liquid propelled rocket ***’s a tough task to replace AP with the currently available green oxidizers;since their ballistic properties are weaker when compared to AP and also they can’t be successfully deployed in a solid rocket motor at present Some important available solid green oxidizers are ammonium nitrate(AN),ammonium dinitramide(ADN),hydroxyl ammonium nitrate(HAN),and hydrazinium nitroformate(HNF).However,AN is one of the cheap and readily available oxidizer,and has great potential to use in solid/liquid rocket *** progress has been envisaged till now,and more progress will be there in the coming future over the development of AN based green energetic materials(GEM’s).A concise overview has been presented over the development of phase stabilized ammonium nitrate(PSAN) and AN/KDN based green oxidizers in the present review paper.

关键词： Green oxidizers Ammonium nitrate(AN) Phase stabilized ammonium nitrate(PSAN) Dinitramide anion(DA) Potassium dinitramide(KDN) Phase stabilizers

Promising light converting BaMoO_4:Er^(3+)-Tm^(3+)-Yb^(3+) phosphors for display and optical temperature sensing

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2018年第12期36卷 1256-1263页

作者： Abhishek kumar Soni Vineet kumar Rai Chemistry Division Bhabha Atomic Research Centre Laser and Spectroscopy Laboratory Department of Applied Physics Indian Institute of Technology (Indian School of Mines)

Er-Tm3+-Ybtri-doped BaMoOphosphors were synthesized by co-precipitation technique and characterized by X-ray diffraction analysis, absorption study and field emission scanning electron microscopy analysis. Upconversion as well as downconversion luminescence studies were performed by using near infrared(980 nm) and ultraviolet(380 nm) excitations. Energy level diagram, pump power dependence and colour coordinate study were utilized to describe the multicolor upconversion emission properties. Under single 980 nm diode laser excitation the dual mode sensing behaviour is realized via Stark sublevels and thermally coupled energy levels of the Tm3+ and Erions in the prepared tri-doped phosphors. A comparative fluorescence intensity ratio analysis for integrated emission intensities arising from the Stark sublevels {~1 G4(a)) and ~1 G4(b))} and thermally coupled energy levels {~2 Hand 4 S3/2} of the Tm3+ and Er3+ ions, respectively was carried out in the prepared tri-doped BaMoOphosphors. The maximum sensitivity for thermally coupled energy levels of the Er3+ and Stark sublevels of the Tm3+ ion was reported. The developed phosphors could be useful in the display devices and optical thermo metric applications.

关键词： Phosphor Optical temperature sensing Stark sublevels Thermally coupled energy levels Rare earths

Information hiding with adaptive steganography based on novel fuzzy edge identification

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2019年第2期15卷 162-169页

作者： Sanjeev kumar Amarpal Singh Manoj kumar I.K.G Punjab Technical University Department of ECE Beant College of Engineering & Technology DAV Institute of Engineering & Technology

The evolution in communication techniques has created wide threats for crucial information transfer through a communication channel. Covert communication with steganography is a skill of concealing secret information within cover object and hence shields the data theft over rapidly growing ***, diverse steganography techniques using edge identification have been proposed in *** methods however utilize certain pixels in the cover image for inserting edge information,resulting in significant deformation. The conventional edge detection method limits the deployment of edge detection in steganography as concealing the information would introduce some variations to the cover image. Hence inserting data in pixel areas recognized by existing conventional edge detection techniques like canny cannot ensure the recognition of the exact edge locations for the cover and stego images. In this paper, an Adaptive steganography method based on novel fuzzy edge identification is proposed. The method proposed is proficient of estimating the precise edge areas of a cover image and also ensures the exact edge location after embedding the secret message. Experimental results reveal that the technique has attained good imperceptibility compared to the Hayat AI-Dmour and Ahmed AIAni Edge XOR method in spatial domain.

关键词： Information security Adaptive steganography Fuzzy edge detection Pattern recognition

Effect of gallium, aluminium, and chromium on silica supported V-Mg-O catalysts during oxidative dehydrogenation of propane: Kinetic study

在线全文

学校读者我要写书评

暂无评论

Journal of Natural Gas Chemistry 2008年第3期17卷 256-263页

作者： B.Ravi kumar Rajeev kumar Department of Chemical Engineering Indian Institute of Technology

The oxidative dehydrogenation （ODH） of propane was conducted on gallium, aluminum, and chromium doped Si30VMgO catalysts. On doping, the concentrations of the phases responsible for the activity and selectivity increased in their concentrations. The reaction studies were conducted in a tubular steel reactor at temperatures of 753, 783, 813, and 843 K and atmospheric pressure. The total flow rates of the feed were chosen as 30, 40, 50, and 60 ml/min. The propane to oxygen ratios were chosen at 1 ： 1, 2 ： 1, and 3 ： 1, respectively. The effect of various dopants on the activity and selectivity of the catalysts was studied. Deactivation studies were conducted over all the catalysts. The kinetic data were analyzed in terms of power law models and Langmuir-Hinshelwood （LH） models. The kinetic data results were analyzed by comparing the effect of dopants. Statistical model discrimination was done for the proposed models. AIC and BIC criteria were used for discrimination of the models.

关键词： oxidative dehydrogenation propane gallium aluminum chromium kinetic

Powder mixed electrochemical discharge process for micro machining of C103 niobium alloy

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2023年第8期26卷 84-101页

作者： Niladri Mandal Nitesh kumar Alok kumar Das Defence Research&Development Laboratory(DRDL)-DRDO HyderabadIndia Department of Mechanical Engineering Indian Institute of Technology(ISM)DhanbadIndia

This work demonstrates the viability of the powder-mixed micro-electrochemical discharge machining(PMECDM) process to fabricate micro-holes on C103 niobium-based alloy for high temperature *** processes are involved simultaneously *** erosion,chemical etching,and abrasive grinding for removal of material while the classical electrochemical discharge machining process involves double actions *** erosion,and chemical *** powder-mixed electrolyte process resulted in rapid material removal along with a better surface finish as compared to the classical microelectrochemical discharge machining(MECDM).Further,the results are optimized through a multiobjective optimization approach and study of the surface topography of the hole wall surface obtained at optimized *** the selected range of experimental parameters,PMECDM shows a higher material removal rate(MRR) and lower surface roughness(R_(a))(MRR:2.8 mg/min and R_(a) of 0.61 μm) as compared to the MECDM process(MRR:2.01 mg/min and corresponding Raof 1.11 μm).A detailed analysis of the results is presented in this paper.

关键词： Micro-electrochemical discharge machining C103 niobium alloy Surface integrity Material removal rate Hybrid powder mixed ECDM

Study of damage behavior and repair effectiveness of patch repaired carbon fiber laminate under quasi-static indentation loading

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 29-41页

作者： Alok kumar Chinmaya kumar Sahoo A.Arockiarajan Department of Applied Mechanics Indian Institute of Technology MadrasChennai 600036India

Damage caused due to low-velocity impacts in composites leads to substantial deterioration in their residual strength and eventually provokes structural *** work presents an experimental investigation on the effects of different patch and parent laminate stacking sequences on the enhancement of impact strength of Carbon Fiber Reinforced Polymers(CFRP)composites by utilising the adhesively bonded external patch repair *** evolution study is also performed with the aid of Acoustic Emission(AE).Two different quasi-isotropic configurations were selected for the parent laminate,viz.,[45°/45°/0°/0°]s and[45°/0°/45°/0°]*** Static Indentation(QSI)test was performed on both the pristine laminates,and damage areas were detected by using the C-scan inspection *** laminates were repaired by using a single-sided patch of two different configurations,viz.,[45°/45°/45°/45°]and[45°/0°/0°/45°],and employing a circular plug to fill the damaged *** different combinations of repaired laminates with two configurations of each parent and patch laminate were produced,which were further subjected to the QSI *** results reveal the effectiveness of the repair method,as all the repaired laminates show higher impact resistance compared to the respective pristine *** of[45°/0°/0°/45°]configuration when repaired by taking[45°/45°/0°/0°]s and[45°/0°/45°/0°]s as parents exhibited 68%and 73%higher peak loads,respectively,than the respective pristine ***,parent and patch of configuration[45°/0°/45°/0°]s and[45°/0°/0°/45°],respectively,attain the highest peak load,whereas[45°/45°/0°/0°]s and[45°/45°/45°/45°]combinations possess the most gradual decrease in the load.

关键词： Carbon fiber reinforced polymers(CFRP) Quasi-isotropic laminate Quasi static indentation(QSI) Acoustic emission(AE) Composite repair

Free vibrations of simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness and elastically restrained edges against rotation using Rayleigh-Ritz method

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2012年第2期11卷 273-280页

作者： Yajuvindra kumar Department of Mathematics M.K.Govt.Degree College NinowaFarrukhabad-209 602Uttar PradeshIndia

This paper addresses the free transverse vibrations of thin simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness with elastically restrained edges against rotation. The Gram-Schmidt process has been used to generate two-dimensional boundary characteristic orthogonal polynomials, which have been used in the Rayleigh-Ritz method to study the problem. The lowest three frequencies have been computed for various values of nonhomogeneous parameters, thickness parameters, aspect ratio and flexibility parameters. A comparison of the results with those available in the literature has been made. Three-dimensional mode shapes for the specified plate have been presented.

关键词： nonhomogeneous rectangular bilinearly varying thickness elastically restrained

Identification of EST–SSRs and molecular diversity analysis in Mentha piperita

在线全文

学校读者我要写书评

暂无评论

The Crop Journal 2015年第4期3卷 335-342页

作者： Birendra kumar Umesh kumar Hemant kumar Yadav CSIR-Central Institute of Medicinal and Aromatic Plant Sciences P.O.CIMAP Near Kukrail Picnic Spot CSIR-National Botanical Research Institute Rana Pratap Marg Academy of Scientific and Innovative Research (AcSIR)

EST sequences of Mentha piperita available in the public domain(NCBI) were exploited to develop SSR markers. A total of 1316 ESTs were assembled into 155 contigs and 653 singletons and of these, 110 sequences were found to contain 130 SSRs, with a frequency of1 SSR/3.4 kb. Dinucleotide repeat SSRs were most frequent(72.3%) with the AG/CT(43.8%)repeat motif followed by AT/AT(16.2%). Primers were successfully designed for 68SSR-containing sequences(62.0%). The 68 primers amplified 13 accessions of M. piperita and 54 produced clear amplicons of the expected size. Of these 54, 33(61%) were found to be polymorphic among M. piperita accessions, showing from 2 to 4 alleles with an average of2.33 alleles/SSR, and the polymorphic information content(PIC) value varied between 0.13 and 0.51(average 0.25). All the amplified SSRs showed transferability among four different species of Mentha, with a highest in Mentha arvensis(87.0%) and minimum in Mentha citrata(37.0%). The newly developed SSRs markers were found to be useful for diversity analysis, as they successfully differentiated among species and accessions of Mentha.

关键词： EST–SSRs Genetic diversity Mentha piperita Polymorphic information content Transferability

Development of a new coated electrode with low nickel content for welding ductile iron and its response to austempering

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2018年第9期25卷 1090-1103页

作者： Tapan Sarkar Ajit kumar Pramanick Tapan kumar Pal Akshay kumar Pramanick Welding Technology Centre Jadavpur University Department of Forge Technology NIFFT

Coated Electrodes with small amounts of nickel were developed for welding ductile iron(DI) and conversion of the same into austempered ductile iron(ADI) after austempering. Among six electrodes, Trials 3 and 4 were selected for establishing crack-free weld deposits via preheating and post-weld heat treatment. Austenitization was performed at 900°C for 2 h and austempering at 300 or 350°C for three different holding times to observe the results of austempering with respect to the microstructure, hardness, and austempering kinetics of the samples. The microstructures of the weld deposits showed needle-like bainitic ferrite with small amounts of retained austenite when treated at 300°C and feathery bainitic ferrite with large amounts of retainedaustenite when treated at 350°C. The electrode labeled with Trial 3 revealed greater austenite contents than that labeled with Trial 4 when treated with a 2 h holding time regardless of the austempering temperature applied. The transformation rate of the bainitic ferrite of Trial 3 was relatively higher than that of Trial 4 and showed a lower rate constant, leading to a higher diffusion rate of carbon in austenite.

关键词： electrode development microstructure XRD analysis transformation kinetic microhardness

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2014年第1期61卷 121-126页

作者： Mukesh kumar Raj kumar Department of Mathematics Motilal Nehru National Institute of Technology Allahabad

In the present work, the new exact solutions of the Boiti-Leon-Pempinelli system have been found. The system has extensive physical background. The exact solutions of the Boiti-Leon-Pempinelli system are investigated using similarity transformation method via Lie group theory. Lie symmetry generators are used for constructing similarity variables for the given system of partial differential equations, which lead to the new system of partial differentiaJ equations with one variable less at each step and eventually to a system of ordinary differential equations （ODEs）. Finally, these ODEs are solved exactly. The exact solutions are obtained under some parametric restrictions. The elastic behavior of the soliton solutions is shown graphically by taking some appropriate choices of the arbitrary functions involved in the solutions.

关键词： Boiti-Leon-Pempinelli system similarity transformation method Lie group theory soliton solutions