检索结果-南通市图书馆

Electrifying Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ) for focalized heating in oxygen transport membranes

在线全文

学校读者我要写书评

暂无评论

journal of Energy Chemistry 2024年第4期91卷 99-110页

作者： marwan Laqdiem julio García-Fayos Laura Almar Alfonso j.Carrillo Álvaro Represa josém.López Nieto Sonia Escolástico David Catalán-martinez jose m.Serra Instituto de Tecnología Química(Universitat Politècnica de valència–Consejo Superior de Investigaciones Científicas) Av.Los Naranjos s/nE-46022 ValenciaSpain

Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind *** the case of pure oxygen production,oxygen transport membranes(OTms)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing ***,OTms could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTms can be integrated into catalytic membrane reactors,providing new pathways for different *** first part of this study was focused on electrification on a traditional OTm material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary *** to the emerging joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be ***,the OTm is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTm non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric ***,the electrification concept was demonstrated in a catalytic membrane reactor(CmR)where the oxidative dehydrogenation of ethane(ODHE)was carried *** reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.

关键词： Oxygen permeation Oxidative dehydrogenation of ethane Oxygen transport membranes joule effect mixed ionic-electronic conductors Catalytic membrane reactors

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

A high-power electromagnetic source for disabling improvised explosive devices

在线全文

学校读者我要写书评

暂无评论

High Voltage 2024年第2期9卷 403-409页

作者： Laurent Ariztia Njomza Ibrahimi Alexey Zhabin Antoine Silvestre de Ferron marc Rivaletto Edson martinod valérie Bertrand Bucur Novac Laurent Pécastaing Universite de Pau et des Pays de l’Adour E2S UPPASIAMEPauFrance XLIm UMR CNRS BriveLimogesFrance CISTEmE LimogesFrance Wolfson School of mechanical Electrical and Manufacturing EngineeringLoughborough UniversityLoughboroughLeicestershireUK

Ultra-wideband(UWB)microwave sources driven by specialised pulsed power generators have experienced a considerable development in the last decade due to their wide domain of new applications such as defence or counter-terrorism *** authors present the main findings of a research dedicated to the development of a pulsed power-driven electromagnetic field source for disabling improvised explosive devices(IED).The pulsed power generator driving the source is a 13-stage compact marx producing voltage pulses reaching an amplitude of 0.5 mV,with a pulse repetition frequency(PRF)of up to 100 *** generator is coupled to a bipolar pulse forming line,providing bipolar pulses with a dV/dt of around 1.6 mV/*** pulsed power system feeds an array composed of 16 Koshelev-type UWB antennas through an impedance matching *** resulting electromagnetic source is capable to produce pulsed electric fields(PEFs)having a figure-of-merit(FOm)of 1 ***,practical experiments were carried out to study the effects of the PEFs on *** targets used in the present study are m2B type flashbulbs,known to have the same susceptibility as the US army m6 *** configurations of wires(shielded,twisted,etc)with different lengths were used in connecting items inside these *** tests were performed by placing the flashbulbs at different distances to determine the essential parameters(i.e.,amplitude,duration,and frequency range)of the PEFs required to trigger *** overview of the experimental campaign and the main findings are also presented followed by conclusions.

关键词： power bipolar source

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-montoya j.m del Río A.de j.morales-Ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.LindavistaGustao A.MaderoCDMXC.P.07738Mexico Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.LindavistaGustavoA.MaderoCDMXC.P.07738Mexico Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P.02250CDMXMexico

Polymeric nanoparticles of poly(methyl methacrylate)were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR)and ultraviolet-visible(UV-Vis)*** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of[Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85%of[Eu]at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50%of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of 6.

关键词： [Eu]recovery Chelating effect Extraction process Stripping process Emulsion polymerization Rare earths

Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 412-417页

作者： Lillian m.mawby Bellamarie Ludwig Benjamin j.Lear Department of Chemistry The Pennsylvania State UniversityUniversity ParkPA16802USA Applied Research Laboratory The Pennsylvania State UniversityUniversity ParkPA16802USA

Though silanization of aluminum powder is currently used to improve its flow properties,for use as an alternative fuel source,there are a wide range of experimental parameters for the process and not all of them have been thoroughly *** this is complete,it is unknown if the process is optimized in terms of time,efficiency,and ***,we report on a study into the effects of changes in humidity,degree of agitation,reaction temperature,and curing time upon the deposition of phenyl triethoxysilane into 20μm(d50)aluminum *** confirm the deposition of the coating via diffuse reflectance infrared spectroscopy and x-ray photoelectron *** then characterize the coated particles using apparent density measurements and Carney flow *** analysis of variance,we find that,of the parameters explored,only changes in cure time and reaction temperature provide meaningful changes to the apparent density,while none of our parameters produced statistically significant changes in Carney flow ***,we conclude that,when optimizing silanization of aluminum particles,environmental control of humidity is unneeded and that the reaction can be run with minimal *** ability to largely ignore these parameters is a benefit to large-scale processing.

关键词： Aluminum powder Silane Fluidization Apparent density Carney flow

Associations between physical activity levels and ATPase inhibitory factor 1 concentrations in older adults

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Sport and Health Science 2024年第3期13卷 409-418页

作者： jérémy Raffin Yves Rolland Annelise Genoux Guillaume Combes mikael Croyal Bertrand Perret Sophie Guyonnet Bruno Vellas Laurent O.martinez Philipe de Souto Barreto For the mAPT/DSA Group Institut du Vieillissement Gérontopôle de ToulouseCentre Hospitalo-Universitaire de ToulouseToulouse 31000France Centre d'Epidémiologie et de Recherche en Santédes Populations UnitéMixte de Recherche 1295Institut National de la Santéet de la Recherche MédicaleUniversitéToulouse-III-Paul-SabatierToulouse 31000France LimitAging Team Institut des Maladies Métaboliques et CardiovasculairesUnitéMixte de Recherche 1297Institut National de la Santéet de la Recherche MédicaleUniversitéToulouse III-Paul SabatierToulouse 31432France Service de Biochimie Pôle de biologieHôpital de PurpanCentre Hospitalo-Universitaire de ToulouseToulouse 31300France L'Institut du Thorax Institut National de la Santéet de la Recherche MédicaleCentre National de la Recherche ScientifiqueCentre Hospitalo-Universitaire de NantesNantes UniversitéNantes 44000France BioCore US16Structure Fédérative de Recherche BonamyInstitut National de la Santéet de la Recherche MédicaleCentre National de la Recherche ScientifiqueCentre Hospitalo-Universitaire de NantesNantes UniversitéNantes 44000France Plate-forme de spectrométrie de masse Centre de Recherche en Nutrition HumaineOuestNantes 44000France 不详

Background:Adenosine triphosphatase inhibitory factor 1(IF1)is a key protein involved in energy ***1 has been linked to various agerelated diseases,although its relationship with physical activity(PA)remains ***,the apolipoprotein A-I(apoA-I),a PA-modulated lipoprotein,could play a role in this relationship because it shares a binding site with IF1 on the cell-surface ATP *** examined here the associations between chronic PA and plasma IF1 concentrations among older adults,and we investigated whether apoA-I mediated these ***:In the present work,1096 healthy adults(63.8%females)aged 70 years and over who were involved in the multidomain Alzheimer Prevention Trial study were ***1 plasma concentrations(square root of ng/mL)were measured at the 1-year visit of the multidomain Alzheimer Prevention Trial,while PA levels(square root of metabolic equivalent task min/week)were assessed using questionnaires administered each year from baseline to the 3-year *** linear regressions were performed to investigate the associations between the first-year mean PA levels and IF1 *** analyses were conducted to examine whether apoA-I mediated these *** linear regressions were carried out to investigate whether the 1-year visit IF1 concentrations predicted subsequent changes in ***:multiple linear regressions indicated that first-year mean PA levels were positively associated with IF1 concentrations(B=0.021;SE=0.010;p=0.043).mediation analyses revealed that about 37.7%of this relationship was mediated by apoA-I(B_(ab)=0.008;SE=0.004;p=0.023).Longitudinal investigations demonstrated that higher concentrations of IF1 at the 1-year visit predicted a faster decline in PA levels over the subsequent 2 years(time×IF1:B=0.148;SE=0.066;p=0.025).Conclusion:This study demonstrates that regular PA is associated with plasma IF1 concentrations,and it suggests that apoA-I partly med

关键词： Aging Apolipoprotein Bioenergetics Exerkine mitochondria