检索结果-南通市图书馆

Depolarization mitigated in ferroelectric Hf_(0.5)Zr_(0.5)O_(2)ultrathin films(<5 nm)on Si substrate by interface engineering

引用

Journal of Advanced Ceramics 2024年第3期13卷 282-292页

作者： Se hyun Kim Younghwan Lee Dong hyun Lee Geun Hyeong Park hyun woo jeong Kun Yang Yong Hyeon Cho Young Yong Kim Min Hyuk Park Department of Materials Science and Engineering College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Research Institute of Advanced Materials College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Inter-university Semiconductor Research Center College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Pohang Accelerator Laboratory Pohang University of Science&TechnologyPohang 790784Republic of Korea

(Hf,Zr)O_(2)offers considerable potential for next-generation semiconductor devices owing to its nonvolatile spontaneous polarization at the ***,scaling this material to sub-5 nm thickness poses several challenges,including the formation of an interfacial layer and high trap *** particular,a low-k SiO_(2)interfacial layer is naturally formed when(Hf,Zr)O_(2)films are directly grown on a Si substrate,leading to high depolarization fields and rapid reduction of the remanent *** address these issues,we conducted a study to significantly improve ferroelectricity and switching endurance of(Hf,Zr)O_(2)films with sub-5 nm thicknesses by inserting a TiO_(2)interfacial *** deposition of a Ti film prior to Hf_(0.5)Zr_(0.5)O_(2)film deposition resulted in a high-k TiO_(2)interfacial layer and prevented the direct contact of Hf_(0.5)Zr_(0.5)O_(2)with *** findings show that the high-k TiO_(2)interfacial layer can reduce the SiO_(2)/Si interface trap density and the depolarization field,resulting in a switchable polarization of 60.2μC/cm^(2)for a 5 nm thick Hf_(0.5)Zr_(0.5)O_(2)***,we propose that inserting a high-k TiO_(2)interfacial layer between the Hf_(0.5)Zr_(0.5)O_(2)film and the Si substrate may offer a promising solution to enhancing the ferroelectricity and reliability of(Hf,Zr)O_(2)grown on the Si substrate and can pave the way for next-generation semiconductor devices with improved performance.

关键词： ferroelectric charge trapping hafnia depolarization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Portable nano probe for micro/nano mechanical scratching and measuring

引用

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 205-209页

作者： woo-Park jeong Chang-Choi SOO Cho hyun woo-Lee DEUG Department of Mechanical Design Engineering Chosun University Department of Nano Fusion Technology Pusan National University Department of Nano-mechatronics Engineering Pusan National University

A nano probe system which can measure precise contact force in mN scale was demonstrated. The nano probe micro parts or optical parts in nanometer range resolution and scratch was originally designed for on-machine measuring applications and one kind of contact type measuring probes was designed for miniaturized or microfactory system. It ideally should be of small size and able to measure surface topography in nanometer scale. A commercial capacitive displacement sensor was proposed. It was a new concept in nano probe systems which can measure the displacement of shaft driven by the variation of surface topography. The nano probe mainly consisted of three parts： a capacitive displacement sensor, a porous type air slide and a contact probe part with various tip radiuses. The porous type air slide assured the shaft slided smoothly with controllable normal force in mN scale and had high positioning accuracy. The probe part which was directly in contact with target surface, can be applied to micro/nanoscale scratching as well as the measurement of sample topography by a simple tip change.

关键词： nano probe displacement sensor air slide PCD tip

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 712-716页

作者： Kang Young jeong hyun Kyung JUNG hyung woo LEE National Core Research Center for Hybrid Materials Solution Hybrid Graduate SchoolPusan National University Department of Diagnostic Radiology Inje University College of MedicineHaeundae Paik Hospital

The effective parameters on the diameter of carbon nanotubes (CNTs) by plasma enhanced chemical vapor deposition (PECVD) were *** lots of influential parameters,the effects of the catalytic film thickness and the pretreatment plasma power on the growth of CNTs were *** results show that the size of catalytic islands increases by increasing the thickness of catalytic layer,but the density of CNTs *** pretreatment duration time of 30 s is the optimal condition for growing CNTs with about 50 nm in *** increasing the pretreatment plasma power,the diameter of CNTs decreases ***,the diameter of CNTs does not change drastically from 80 to 120 *** uniformly grown CNTs with the diameter of 50 nm are obtained at the pretreatment plasma power of 100 W.

关键词： carbon nanotubes catalytic film thickness pretreatment plasma power plasma enhanced chemical vapor deposition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Effect of Plasma Surface Treatment on a Porous Green Ceramic Film with Polymeric Binder Materials

引用

Plasma Science and Technology 2013年第6期15卷 521-527页

作者： jeong woo YUN School of Applied Chemical Engineering Chonnam National University

To reduce time and energy during thermal binder removal in the ceramic process, plasma surface treatment was applied before the lamination *** adhesion strength in the lamination films was enhanced by oxidative plasma treatment of the porous green ceramic film with polymeric binding *** oxygen plasma characteristics were investigated through experimental parameters and weight loss *** experimental results revealed the need for parameter analysis,including gas material,process time,flow rate,and discharge power,and supported a mechanism consisting of competing ablation and deposition *** weight loss analysis was conducted for cyclic plasma treatment rather than continuous plasma treatment for the purpose of improving the film’s permeability by suppressing deposition of the ablated *** cyclic plasma treatment improved the permeability compared to the continuous plasma treatment.

关键词： plasma surface treatment oxidative plasma green ceramic film ablation deposition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Symptomatic accessory soleus muscle:A cause for exertional compartment syndrome in a young soldier:A case report

引用

World Journal of Clinical Cases 2022年第35期10卷 13022-13027页

作者： Inha woo Chul hyun Park Hongfei Yan jeong Jin Park Department of Orthopaedic Surgery Yeungnam University HospitalDaegu 42492South Korea Department of Orthopaedics Yeungnam University HospitalDaegu 42415South Korea

BACKGROUND Accessory soleus muscle(ASM)is a rare congenital variation that is almost asymptomatic,but several papers have recently described symptomatic *** clinical features of this condition are similar to tarsal tunnel syndrome(TTS)and include pain and numbness around the medial side of the *** commonly originates from the fibula or soleus muscle and inserts into the Achilles tendon or ***,it is identified as posteromedial swelling and definitely diagnosed by magnetic resonance *** most cases,treatment is observation,but surgical excision can be considered if symptoms are *** SUMMARY A 23-year-old male Korean soldier presented with complaints of bilateral foot and ankle pain and a swelling medial to the Achilles tendon that was more pronounced on the right *** first occurred after playing soccer 10 mo before this presentation,worsened after physical exertion,and were relieved by *** had no medical history,and no one in his family had the *** results were *** tests were performed to exclude common diseases such as tumors or ***,MRI revealed a bulky accessory soleus muscle in both feet,though the patient complained of more severe pain on the right side during physical ***,surgical resection was *** surgery,a large accessory soleus muscle was noted anterior to the Achilles tendon with distinctive insertion from a normal soleus *** 12 mo after surgery,there was no pain,numbness,or swelling of the right foot or ankle,no evidence of recurrence,and the patient could do all sports *** Accessory soleus muscle should be added to the list of differential diagnosis if a patient has pain,sole numbness or swelling of the posteromedial ankle.

关键词： Accessory soleus muscle Posteromedial ankle pain Exertional compartment syndrome Tarsal tunnel syndrome Sole numbness Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rheological,textural,and functional characteristics of 3D-printed cheesecake containing guava leaf,green tea,and barley sprout powders

引用

Food Bioscience 2022年第3期47卷 338-345页

作者： Ye-Eun Park jeong Kim hyun woo Kim Jiyeon Chun Department of Food Science and Technology Sunchon National UniversitySuncheon57922Republic of Korea Department of Biotechnology College of Life Science and BiotechnologyKorea UniversityAnam-dongSeongbuk-guSeoul02841Republic of Korea Kimchi Science and Industrialization Institute Sunchon National UniversitySuncheon57922Republic of Korea

The use of 3D food printing as an alternative to manufacturing customized food is gaining *** this study,functional powders of guava leaf (GL),green tea (GT),and barley sprouts (BS) were tested as edible ink ingredients for printing cheesecake,and their physicochemical and functional properties were *** size and water and oil holding capacities were highest in GL powder,whereas the water-soluble index was highest in *** functional powder-added cheesecake,pseudoplastic and shear-thinning behavior was observed which is ideal for 3D *** shear modulus (1.87 kPa) of the control cheesecake (without functional powder) was significantly increased to 5 kPa or higher by adding functional *** in vitro glycemic index was lowest in GL cheesecake,whereas antioxidant activity and polyphenol content were highest in GT *** and GT powders would be beneficial as an edible ink to improve functional properties,such as antioxidant activity for GT and blood-glucose-lowering effect for BS,with enhanced printability and textural stability of 3D printed cheesecake.

关键词： 3D food print Guava Green tea Barley sprout Cheesecake

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Self‑Powered Airflow Sensor Based on Energy Harvesting of Ventilation Air in Buildings

引用

Advanced Fiber Materials 2023年第5期5卷 1788-1798页

作者： Moon hyun Chung Seunghwan Yoo woo‑Nam Jung Hakgeun jeong Kyung‑Hwa Yoo Department of Physics Yonsei University50 Yonsei‑RoSeodaemun‑GuSeoul 03722Republic of Korea Energy ICT Convergence Research Department Energy Efficiency Research DivisionKorea Institute of Energy Research152 Gajeong‑RoYuseong‑GuDaejeon 34129Republic of Korea Advanced Combustion Power Lab Energy Efficiency Research DivisionKorea Institute of Energy Research152Gajeong‑RoYuseong‑GuDaejeon 34129Republic of Korea Department of Mechanical Engineering Korea Advanced Institute of Science and Technology(KAIST)291 Daehak‑RoYuseongDaejeon 34141Republic of Korea

Heating,ventilation,and air conditioning(HVAC)systems account for one-third of the total energy consumption in office *** use of airflow measurements to control the operation of HVAC systems can reduce energy consumption;thus,a sensor capable of monitoring airflow in a duct system is *** nanogenerators(TENGs)can be utilized as self-powered sensors in airflow-driven TENGs(ATENGs)as self-powered *** employing ferroelectric materials and surface modifications,the surface charges of TENGs can be *** this study,fibrous-mat TENGs were prepared using ferroelectric materials consisting of poly(vinylidene fluoride-co-trifluoroethylene)(PVDF-TrFE)and polyamide 11(nylon-11).And these materials were subsequently ***(3,4-ethylenedioxythiophene):poly(styrenesulfonate)was added to PVDF-TrFE to enhance the ferroelectric crystalline phase.X-ray diffraction analysis revealed that this incorporation affects theβ*** addition,the surface of nylon-11 was modified using the electrospray technique for post-treatment,thereby improving the interfacial adhesion between the *** materials were then utilized in fibrous-mat ATENGs(FM-ATENGs)to demonstrate their practical *** FM-ATENGs can be effectively used in an Arduino airflowcheck sensor,showcasing their potential for application in HVAC systems,to enhance airflow control and energy efficiency.

关键词： HVAC Airflow-driven triboelectric nanogenerator Building energy harvesting Fibrous mat Airflow sensor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enrichment by air classification of indium components from In-containing scrap powders scraped by sand-blasting chamber shields of sputter coaters

引用

Rare Metals 2010年第1期29卷 1-8页

作者： Sungkyu Lee Soo-Bok jeong Hang-Chul Jung hyun Seon Hong Yongseung Yun Sang Mo woo Plant Engineering Center Institute for Advanced Engineering633-2 Goan-ri Baegam-myeon Cheoin-gu Yongin-si Gyeonggi-do 449-863 Korea Division of Chemical and Materials Engineering Ajou University 5 Wonchon Youngtong Suwon Gyeonggi-do 443-749 Korea Minerals and Materials Processing Division Korea Institute of Geo-science and Mineral Resources (KIGAM) 30 Gajeong-dong Yuseong-gu Daejeon 305-350 Korea Plant Engineering Center Institute for Advanced Engineering633-2 Goan-ri Baegam-myeon Cheoin-gu Yongin-siGyeonggi-do 449-863 Korea 9 Digit Co. Ltd. 20BL-10L Namdong Industrial Complex428-9 Nonhyeon-dong Namdong-gu Incheon 405-848 Korea

Raw scrap powders containing 10 wt.% In were recovered by sand-blasting chamber shields of sputter coaters and used as a sole source of indium components for both sieving and air-classification. Sieving was performed first as a feasibility test, and enrichment of indium component was possible up to 19 wt.% with a mesh size of 635. With this experimental basis, the raw scrap powders were air-classified into 12 lots according to the revolution per minute （r/min） of a single horizontally arranged classifying wheel： 4000, 6000, 8000, 10000, 12000, and 14000 r/rain. The particle cut size varied from 56 to 5 μm with turbo wheel speeds corresponding to 4000 to 14000 r/min, respectively, and enrichment of indium component was possible in fine overflow fractions at all turbo wheel speeds while the indium components were not concentrated in all of the coarse underflow fractions. The grade of the indium components became higher with decreasing particle size of the air-classified scrap powders, with the highest grade obtained in the fine overflow fraction with a turbo wheel speed of 14000 r/min. The amount of indium in the fine overflow fractions varied between 15.9 wt.% and 31.5 wt.%. All in all, the grade or purity of the indium component improved rather significantly from 15.9 wt.% to 31.5 wt.% by air-classification, but this also resulted in overall decrease in recovery rate from 99.33% to 49.64%. Therefore, enrichment and separation of indium should be optimized for maximum recovery and grade of the indium components, which can be used as raw materials in the subsequent electro-refining processes.

关键词： indium air-classification recycling indium tin oxide gas-cyclone dry dispersion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Precise control of surface oxygen vacancies in ZnO nanoparticles for extremely high acetone sensing response

引用

Journal of Advanced Ceramics 2022年第5期11卷 769-783页

作者： Jihyun LEE Youngmoon CHOI Byoung Joon PARK jeong woo HAN hyun-Sook LEE Jong Hyeok PARK wooyoung LEE Department of Materials Science and Engineering Yonsei UniversitySeoul 03722Republic of Korea Department of Chemical and Biological Engineering Yonsei UniversitySeoul 03722Republic of Korea Department of Chemical Engineering Pohang University of Science and TechnologyPohang 37673Republic of Korea Institute for Convergence Research and Education in Advanced Technology Yonsei UniversitySeoul 03722Republic of Korea

ZnO has been studied intensely for chemical sensors due to its high sensitivity and fast ***,we present a simple approach to precisely control oxygen vacancy contents to provide significantly enhanced acetone sensing performance of commercial ZnO nanopowders.A combination of H_(2)O_(2)treatment and thermal annealing produces optimal surface defects with oxygen vacancies on the ZnO nanoparticles(NPs).The highest response of~27,562 was achieved for 10 ppm acetone in 0.125 MH_(2)O_(2)treated/annealed ZnO NPs at the optimal working temperature of 400℃,which is significantly higher than that of reported so far in various acetone sensors based on metal oxide semiconductors(MOSs).Furthermore,first-principles calculations indicate that pre-adsorbed O formed on the surface of H_(2)O_(2)treated ZnO NPs can provide favorable adsorption energy,especially for acetone detection,due to strong bidentate bonding between carbonyl C atom of acetone molecules and pre-adsorbed O on the ZnO *** study demonstrates that controlling surface oxygen vacancies by H_(2)O_(2)treatment and re-annealing at optimal temperature is an effective method to improve the sensing properties of commercial MOS materials.

关键词： gas sensors acetone metal oxide semiconductors(MOSs) ZnO nanoparticles(NPs) H_(2)O_(2)treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dislocation characteristics and dynamic recrystallization in hot deformed AM30 and AZ31 alloys

引用

Journal of Magnesium and Alloys 2022年第12期10卷 3495-3505页

作者： Hyeon-woo Son Soong-Keun hyun Metallic Materials Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Engineering Inha UniversityIncheon 22212Republic of Korea

Zn addition to Mg alloys activates non-basal slip or twinning with solute softening *** the other hand,the effects of the Zn solute on the macroscopic dislocation behavior and dynamic recrystallization are not completely ***,it is unclear ifslip can be affected by changes in the c/a ratio of solute *** study was conducted to understand the solute strengthening of Zn addition and its effects on the dislocation characteristics and dynamic recrystallization.A hot torsion test was performed on both AM30 and AZ31 alloys up to a high strain to investigate the Zn solute effect on the dislocation characteristics and dynamic *** dislocation components of the hot torsioned alloys were evaluated by X-ray line profile analysis and electron backscatter *** results showed that the Zn solutes slightly accelerate strain accumulation at the initial stages of hot deformation,which accelerated recrystallization at high *** dislocation characteristics were changed dynamically by Zn addition:fortified-type slip,dislocation arrangement and strain anisotropy *** most important point was that the dislocation characteristics were changed dramatically at the critical strain for recrystallization and high strain *** addition of Zn also acted greatly in these strain *** indicates that the rapid formation of-type slip at the serrated grain boundaries occurs at the initiation of dynamic recrystallization and the increase in the grain triple junction because grain refinement has a great influence on the dislocation characteristics at high strain.

关键词： Magnesium alloy X-ray line profile Solid solution Dislocation density Dynamic recrystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：