检索结果-南通市图书馆

Earthquake Engineering and Engineering Vibration 2022年第1期21卷 37-51页

作者： Kil-Wan Ko Jeong-Gon Ha Dong-soo kim Department of Civil and Environmental Engineering UC BerkeleyCalifornia 94720USA Advanced Structures and Seismic Safety Research Division Daejeon 34057Korea Department of Civil and Environmental Engineering KAISTDaejeon 34141Korea

The challenge in the practical application of rocking foundations is the estimation of its performance,particularly the rotation angle,during a strong *** this study,the dynamic rocking behavior for a shallow foundation considering structural response was evaluated through two analytical approaches:the conventional soil-foundation-structure interaction(SFSI)governing equation of a single-degree-of-freedom(SDOF)structure on a rocking shallow foundation,and the Housner rocking model(i.e.,a rocking rigid block on a rigid base).Both approaches were validated with dynamic centrifuge *** test models consisted of a soft soil deposit,a shallow rectangular foundation,and an SDOF structure dominated by a bending behavior.A total of 11 foundation-structure systems and six seismic waves,including recorded earthquake signals and sinusoidal waves,were *** results showed that the conventional SFSI equation well predicted the maximum rotation during strong ***,this method was less accurate regarding the rotational phase information and maximum rotation of the foundation during weak *** the other hand,although the modified Housner′s rocking model required five parameters relevant to a soil-foundation-structure system,it overestimated the maximum rotation of the foundation when compared with the results from dynamic centrifuge tests.

关键词： soil-foundation-structure interaction maximum rotation angle rocking foundation Housner rocking model dynamic centrifuge test

Development of RuS_(2) for near-infrared photodetector by atomic layer deposition and post-sulfurization

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2022年第9期41卷 3086-3099页

作者： Tatsuya Nakazawa Donghyun kim Jaehyeok kim Yohei Kotsugi Taehoon Cheon Seung-Min Chung soo-Hyun kim Hyungjun kim School of Electrical and Electronic Engineering Yonsei UniversitySeoul03722Korea Isehara Technical Center Metallic Materials Development DepartmentTANAKA Kikinzoku Kogyo K.KIseharaKanagawa259-1146Japan Institute of Materials Technology Yeungnam UniversityGyeongsan-si38541GyeongbukKorea Chemical Materials Development Department TANAKA Kikinzoku Kogyo K.KTsukuba Technical CenterIbaraki300-4247Japan School of Materials Science and Engineering Yeungnam UniversityGyeongsan-si38541GyeongbukKorea Center for Core Research Facilities Daegu Gyeongbuk Institute of Science&TechnologyDaegu711-873Korea

The chalcogenides of platinum-group metals(PGMs)have been known to be present in minerals and the intermediate products of *** recent years,their applications in various fields,including catalysis,have been *** that certain PGM chalcogenides behave as compound semiconductors,they can be used as materials for *** this study,RuS_(2),featuring a bandgap suitable for near-infrared photodetectors,was prepared by forming Ru on a SiO_(2)/Si substrate via the atomic layer deposition method using[Ru(TMM)(CO)_(3)]as the *** was conducted at 800℃ for 1 h under H_(2)S ***-resolution transmission electron microscopy(HRTEM)and X-ray diffraction(XRD)analysis clearly confirmed that the as-deposited hexagonal close-packed(hcp)Ru transformed to cubic RuS_(2) after *** surface morphologies,chemical states,and electrical and optical properties of RuS_(2) were *** influence of the metallic Ru surface morphology prior to sulfurization on the reaction between Ru and H_(2)S was also *** evaluate the potential of using RuS_(2) as a photodetector,a photodetector was fabricated by forming electrodes on RuS_(2) to measure its photocurrent under near-infrared ***,RuS_(2) was proven to exhibit a short response time(59μs)and generate a photocurrent of 84 nA under near-infrared light at 940 nm.

关键词： RuS_(2) Sulfurization Atomic layer deposition Photodetector

User Interface-Based Repeated Sequence Detection Method for Authentication

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intelligent Automation & Soft Computing 2023年第3期35卷 2573-2588页

作者： Shin Jin Kang soo Kyun kim School of Games Hongik UniversitySejong30016Korea Department of Computer Engineering Jeju National UniversityJeju63243Korea

In this paper,we propose an authentication method that use mouse and keystroke dynamics to enhance online privacy and *** proposed method identiﬁes personalized repeated user interface(UI)sequences by analyzing mouse and keyboard *** this end,an Apriori algorithm based on the keystroke-level model(KLM)of the human–computer interface domain was *** proposed system can detect repeated UI sequences based on KLM for authentication in the *** effectiveness of the proposed method is veriﬁed through access test-ing using commercial applications that require intensive UI *** results show using our cognitive mouse-and-keystroke dynamics system can com-plement authentication at the application level.

关键词： Authentication keystroke-level model(KLM) keystroke mouse dynamics

Applying Job Shop Scheduling to SMEs Manufacturing Platform to Revitalize B2B Relationship

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2023年第3期74卷 4901-4916页

作者： Yeonjee Choi Hyun Suk Hwang Chang soo kim Department of Information Systems Pukyong National UniversityBusan608737Korea Research Center Hanyoung DSInc.Seoul07600Korea

A small and medium enterprises(SMEs)manufacturing platform aims to perform as a significant revenue to SMEs and vendors by providing scheduling and monitoring *** optimal job shop scheduling is generated by utilizing the scheduling system of the platform,and a minimum production time,i.e.,makespan decides whether the scheduling is optimal or *** scheduling result allows manufacturers to achieve high productivity,energy savings,and customer *** in Industry 4.0 requires dynamic,uncertain,complex production environments,and customer-centered *** paper proposes a novel method for solving the difficulties of the SMEs manufacturing by applying and implementing the job shop scheduling system on a SMEs manufacturing *** primary purpose of the SMEs manufacturing platform is to improve the B2B relationship between manufacturing companies and *** platform also serves qualified and satisfactory production opportunities for buyers and producers by meeting two key factors:early delivery date and fulfillment of processing as many orders as *** genetic algorithm(GA)-based scheduling method results indicated that the proposed platform enables SME manufacturers to obtain optimized schedules by solving the job shop scheduling problem(JSSP)by comparing with the real-world data from a textile weaving factory in South *** proposed platform will provide producers with an optimal production schedule,introduce new producers to buyers,and eventually foster relationships and mutual economic interests.

关键词： Manufacturing platform job shop scheduling problem(JSSP) genetic algorithm optimization textile process

Image Translation Method for Game Character Sprite Drawing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2022年第5期130卷 747-762页

作者： Jong-In Choi soo-Kyun kim Shin-Jin Kang Department of Digital Media Seoul Women’s UniversitySeoul01797Korea Computer Engineering Jeju National UniversityJeju63243Korea School of Games Hongik UniversitySejong30016Korea

Two-dimensional(2D)character animation is one of the most important visual elements on which users’interest is focused in the game ***,2D character animation works in the game field are mostly performed manually in two dimensions,thus generating high production *** study proposes a generative adversarial network based production tool that can easily and quickly generate the sprite images of 2D ***,we proposed a methodology to create a synthetic dataset for training using images from the real world in the game resource production field where machine learning datasets are *** addition,we have enabled effective sprite generation while minimizing user input in the process of using the *** this end,we proposed a mixed input method with a small number of segmentations and skeletal bone *** proposed image-to-image translation network effectively generated sprite images from the user input images using the skeletal *** conducted an experiment regarding the number of images required and showed that 2D sprite resources can be generated even with a small number of segmentation inputs and one skeletal bone drawing.

关键词： Sprite generation body segmentation pose estimation generative adversarial network deep learning

Distinctive clinical features of spontaneous pneumoperitoneum in neonates: A retrospective analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2022年第23期10卷 8124-8132页

作者： soo-Hong kim Yong-Hoon Cho Hae-Young kim Department of Surgery Pusan National University Yangsan HospitalPusan National University School of MedicineYangsan 50612South Korea Research Institute for Convergence of Biomedical Science and Technology Pusan National University Yangsan HospitalYangsan 50612South Korea

BACKGROUND Spontaneous pneumoperitoneum(SP) without gastrointestinal perforation rarely occurs in neonates, with most SP cases being idiopathic. Although SP usually follows a benign clinical course with favorable prognosis, it can become lifethreatening in certain situations. In these cases, urgent surgical intervention may be required. Therefore, it may be difficult to decide when or how to perform prompt *** To demonstrate the distinct clinical features of SP to guide appropriate management by comparing characteristics between SP and typical pneumoperitoneum secondary to gastrointestinal *** We retrospectively reviewed electronic medical records and identified 37 neonates with radiological evidence of pneumoperitoneum who were treated at our institution. Clinical variables were compared between neonates with SP without gastrointestinal perforation(Group A) and those with pneumoperitoneum secondary to gastrointestinal perforation(Group B). Clinical variables between groups were compared using Student’s t-test and the chi-square test. The risk factors related to mortality were examined using multi-logistic regression *** Group A comprised 35.1%(13/37) of the patients. The frequency of persistent pulmonary hypertension(53.8%) and pneumothorax(46.2%) before the development of pneumoperitoneum was significantly higher in group A than in group B(P =0.004). Platelet count and partial pressure of arterial oxygen(PaO) were significantly lower in group A(P = 0.015 and 0.025, respectively). Overall mortality was significantly higher in group A than in group B(76.9% vs 16.7%, P = 0.001). Only preterm infants were significantly associated with high mortality(P = 0.041;odds ratio = 18.0). Accompaniment with persistent pulmonary hypertension and pneumothorax were also significantly high(P = 0.004) in group A, but these were not strongly associated with high *** This study identified a higher mortality rate in patients w

关键词： Spontaneous pneumoperitoneum Thrombocytopenia Persistent pulmonary hypertension Pneumothorax Preterm

Microstructural characteristics and low-cycle fatigue properties of AZ91 and AZ91-Ca-Y alloys extruded at different temperatures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2023年第3期11卷 892-902页

作者： Ye Jin kim Young Min kim Jun Ho Bae soo-Hyun Joo Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Engineering Dankook UniversityCheonan 31116Republic of Korea

The commercial AZ91 alloy and nonflammable SEN9(AZ91-0.3Ca-0.2Y,wt%)alloy are extruded at 300°C and 400°*** microstructure,tensile and compressive properties,and low-cycle fatigue(LCF)properties are investigated,with particular focus on the influence of the extrusion *** the AZ91 and SEN9 materials extruded at 300°C(300-materials),numerous fine Mg_(17)Al_(12)particles are inhomogeneously distributed owing to localized dynamic precipitation during extrusion,unlike those extruded at 400°C(400-materials).These fine particles suppress the coarsening of recrystallized grains,decreasing the average grain size of *** the four extruded materials have considerably different microstructures,the difference in their tensile yield strengths is insignificant because strong grain-boundary hardening and precipitation hardening effects in 300-materials are offset almost completely by a strong texture hardening effect in ***,owing to their finer grains and weaker texture,300-materials have higher compressive yield strengths *** the LCF tests,{10-12}twinning is activated at lower stresses in 400-materials than in *** the fatigue damage accumulated per cycle is smaller in 400-materials,they have longer fatigue lives than those of 300-materials.A fatigue life prediction model for the investigated materials is established on the basis of the relationship between the total strain energy density(ΔW_(t))and the number of cycles to fatigue failure(N_(f)),and it is expressed through a simple equation(ΔW_(t)=10·N_(f)-0.59).This model enables fatigue life prediction of both the investigated alloys regardless of the extrusion temperature and strain amplitude.

关键词： AZ91-Ca-Y Extrusion temperature Microstructure Low-cycle fatigue Fatigue life prediction model

3D printed leech-inspired origami dry electrodes for electrophysiology sensing robots

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

npj Flexible Electronics 2022年第1期6卷 61-70页

作者： Tae-Ho kim Chao Bao Ziniu Chen Woo soo kim Additive Manufacturing Laboratory School of Mechatronic Systems EngineeringSimon Fraser UniversitySurreyBCCanada

In this study,based on inspiration drawn from origami and the suction mechanism of leeches,a dry electrode is developed for reliable blood pressure(BP)*** leech-inspired suction mechanism generated a local soft vacuum facilitating appropriate contact with the human ***,an electrocardiogram(ECG)sensor,termed a leech-inspired origami(LIO)sensor,was constructed using the developed dry *** LIO with a sensing robot system ensures reliable ECG signals with a signal-to-noise ratio of 21.7±0.56 *** the paired detection of ECG and photoplethysmography(PPG)through human-robot interaction,BP monitoring was *** average difference of the systolic BP between that estimated by the sensing robot and that monitored by the sphygmomanometer was 0.03 mmHg,indicating the reliable BP monitoring ability of the sensing *** LIO sensing system inspired by origami and leech behaviors makes BP sensing tools feasible,which in turn would further the development of a remote healthcare monitoring robotic system.

关键词： robot app system

Amine functionalization on thermal and mechanical behaviors of graphite nanofibers-loaded epoxy composites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第20期151卷 80-88页

作者： Seong-Hwang kim Sang-Jin Park Seul-Yi Lee soo-Jin Park Department of Chemistry Inha University100 InharoIncheon 22212the Republic of Korea

With the growing demand for faster and more powerful computing,effective heat dissipation is essential to ensure the longevity,reliability,and high performance of electronic *** the field of modern electronic packaging materials,there is a great need for graphitic material-loaded polymeric composites(GPCs)with excellent thermal ***,the enhancement efficiency of GPCs is hindered by the agglomeration of fillers and the interfacial thermal resistance caused by the lack of continuous thermally conductive pathways between the filler and *** the interfaces between filler and matrix is of great importance in optimizing the performances of ***,we fabricated graphite nanofibers(GNF)-loaded nanocomposites using acid-functionalized GNF(AGNF)and acidtetraethylenepentamine-functionalized(TGNF)as a filler and epoxy resin as a matrix with different GNF loading contents to explore the interfacial properties of the *** optimal GNF loading for AGNF was 0.5 wt.%,while the TGNF showed 0.75 wt.%.The highest thermal conductivity(0.51 W m^(−1) K^(−1))and fracture toughness(25.8 MPa m^(1/2))values were found in the TGNF-loaded nanocomposites with a fraction of 0.75 wt.%,representing enhancements of∼145%and∼400%,respectively,compared to those of neat *** experimental data presented herein demonstrate that the interfacial properties play a significant role in enhancing the thermal and mechanical performances of the *** present approach is expected to serve as a valuable tool in the design of conductive polymeric nanocomposites for further practical applications,such as thermal interface materials and packaging of high-power electric devices.

关键词： Graphite nanofiber Nanocomposites Interfacial interaction Thermal conductivity Fracture resistance

Corticosteroid-induced bradycardia in multiple sclerosis and maturity-onset diabetes of the young due to hepatocyte nuclear factor 4-alpha mutation:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2022年第21期10卷 7415-7421页

作者： Sung-Yeon Sohn Shin Yeop kim In soo Joo Department of Neurology Ajou University School of MedicineAjou University Medical CenterSuwon 16499South Korea

BACKGROUND Intravenous steroid pulse therapy is the treatment of choice for acute exacerbation of multiple sclerosis(MS).Although steroid administration is generally welltolerated,cases of cardiac arrhythmia have been ***,we describe a young woman who developed marked sinus bradycardia and T-wave abnormalities after corticosteroid *** also present plausible explanations for the abnormalities observed in this *** SUMMARY An 18-year-old woman experienced vertiginous dizziness and binocular diplopia 1 wk prior to *** examination revealed left internuclear ophthalmoplegia with left peripheral-type facial *** initial laboratory results were consistent with those of type 2 *** magnetic resonance imaging revealed multifocal,non-enhancing,symptomatic lesions and multiple enhancing *** was diagnosed with MS and maturity-onset diabetes of the *** methylprednisolone was *** day 5 after methylprednisolone infusion,marked bradycardia with T-wave abnormalities were *** evaluation to elucidate the underlying conditions revealed a hepatocyte nuclear factor 4-alpha(HNF4A)gene *** treatment was discontinued under suspicion of corticosteroid-induced *** electrocardiogram changes returned to normal without complications two days after steroid *** Corticosteroid-induced bradycardia may have a significant clinical impact,especially in patients with comorbidities,such as HNF4A mutations.

关键词： Steroids Bradycardia Multiple sclerosis Maturity-onset diabetes of the young Hepatocyte nuclear factor 4-alpha Case report