检索结果-南通市图书馆

Rare Metals 2019年第3期38卷 252-258页

作者： chun-hong wang Li-Min Hu Zhi-Feng wang Ming Zhang School of Chemistry and Chemical Engineering Yangzhou University Testing Center Yangzhou University

In this work, the polyacrylonitrile containing gadolinium nanofibers for thermal neutron protection were successfully fabricated by electrospunning and followed by in situ self-polymerization. Scanning electron microscopy(SEM) and energy-dispersive spectroscopy(EDS) results show that there are no beads on the smooth surface of the nanofibers and gadolinium elements are uniformly dispersed in the matrix. The thermal analysis and FTIR results prove that gadolinium methacrylate is induced in situ selfpolymerization during the heat treatment. The leaching rate of Gd^(3+) decreases from 79.97% to 10.74% tested by lowfield nuclear magnetic resonance(LF-NMR) method after the self-polymerization of gadolinium methacrylate in the matrix when the nanofibers were immersed in water for7 days. The thermal neutron shielding analysis calculated by MCNP program shows that above 99% thermal neutrons are absorbed when traveling through the 2-mm-thick polyacrylonitrile containing gadolinium nanofibers.

关键词： Gadolinium Polyacrylonitrile Electrospinning In situ self-polymerization Thermal neutron shielding

Three-Di mensional Model for Strip Hot Rolling

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2006年第1期13卷 23-26页

作者： ZHANG Guo-min XIAO hong wang chun-hua Engineering College Yanshan University Qinhuangdao 066004 Hebei China

A three-dimensional model for strip hot rolling was developed, in which the plastic deformation of strip, the thermal crown of rolls, roll deflection and flattening were calculated by rigid-plastic finite element method, finite difference method, influential function method and elastic finite element method respectively. The roll wear was taken into consideration. The model can provide detailed information such as rolling pressure distribution, contact pressure distribution between backup rolls and work rolls, deflection and flattening of work rolls, lateral distribution of strip thickness, and lateral distribution of front and back tensions. The finish rolling on a 1 450 mm hot strip mill was simulated.

关键词： strip hot rolling model finite difference method influential function method finite element method

Self-polymerization and co-polymerization kinetics of lead methacrylate

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2021年第3期40卷 736-742页

作者： Yu-Juan Zhang Xin-Tao Guo chun-hong wang De-Feng Wu Ming Zhang School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhou 225002China Department of Materials Research AVIC Manufacturing Technology InstituteBeijing 100024China

Hydrogen nuclear magnetic resonance(H1-NMR) and X-ray diffractometer(XRD) were used to characterize the molecular and crystal structure of lead methacrylate [Pb(MAA)_(2)] which was produced by the double decomposition reaction of lead oxide and methacrylic *** analysis and Kelen-T(u|")dos(K-T) method were used to study the self-polymerization kinetic and the monomer reactivity ratios of Pb(M A A)_(2) and methyl methacrylate(MMA),*** the ternary polymerization method of bulk casting using MMA,Pb(MAA)_(2) and gadolinium methacrylate(Gd(MAA)_(3)) as monomers,we prepared the plexiglass which have neutron and X-ray protection *** results show that the polymerization rate(R_(p)) is expressed as Rp=K[M]^(1.02)[I]^(0.37) below the 10% conversion rate at 70℃,where K is the polymerization rate *** in the N,N-dimethylformamide(DMF) solution,the activation energy required for Pb(MAA)_(2) to initiate self-polymerization by the free radicals is 74.99 kJ·mol^(-1).The reactivity ratios of r1 [Pb(MAA)_(2)] and r2(MMA) are 3.767 *** the thickness of the material increases,the X-ray and thermal neutron shielding ability of the plexiglass containing gadolinium and lead is getting better and better.

关键词： Lead methacrylate Polymerization kinetic Reactivity ratio Plexiglass

SMALL KERNEL4 is required for mitochondrial cox1 transcript editing and seed development in maize

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Plant Biology 2020年第6期62卷 777-792页

作者： hong-chun wang Aqib Sayyed Xin-Yuan Liu Yan-Zhuo Yang Feng Sun Yong wang Miaodi wang Bao-Cai Tan Key Laboratory of Plant Development and Environment Adaptation Biology Ministry of EducationSchool of Life SciencesShandong UniversityQingdao 266237China

In land plants,cytidine-to-uridine(C-to-U)editing of organellar transcripts is an important posttranscriptional process,which is considered to remediate DNA genetic mutations to restore the coding of functional *** repeat(PPR)proteins have key roles in C-to-U *** to its large number,however,the biological functions of many PPR proteins remain to be *** characterizing a small kernel4(smk4)mutant,here we report the function of Smk4 and its role in maize growth and *** mutation of Smk4 slows plant growth and development,causing small plants,delayed flowering time,and small *** revealed that Smk4 encodes a new E-subclass PPR protein,and localization indicated that SMK4 is exclusively localized in *** of Smk4 function abolishes C-to-U editing at position 1489 of the cytochrome c oxidase1(cox1)transcript,causing an amino acid change from serine to proline at 497 in ***1 is a core component of mitochondrial complex ***,complex IV activity is reduced in the smk4,along with drastically elevated expression of alternative oxidases(AOX).These results indicate that SMK4 functions in the C-to-U editing of cox1-1489,and this editing is crucial for mitochondrial complex IV activity,plant growth,and kernel development in maize.

关键词： cox1 editing maize

Cathepsin B protease is required for metamorphism in silkworm, Bombyx moil

在线全文

学校读者我要写书评

暂无评论

Insect Science 2008年第3期15卷 201-208页

作者： Gen-hong wang chun Liu Qing-You Xia Xing-Fu Zha Jie Chen Liang Jiang Key Sericultural Laboratory of the Agricultural Ministry College of Biotechnology Southwest University Chongqing China

Cathepsin B belongs to lysosomal cysteine protease of the papain family. Temporal and spatial expression analysis of cathepsin B of Bombyx mori （BmCtB） was carried out based on Expression Sequence Tags （ESTs） data, oligonucleotide microarray, reverse transcription polymerase chain reaction （RT-PCR） and quantitative real-time PCR. Expression of BmCtB was observed in all of the tissues and stages. Among the 10 tested tissues, the fat body and posterior silk gland are the two most enriched tissues with BmCtB. During Bombyx development, there was an expression fastigium of BmCtB during metamorphosis. RNA interference was used to suppress the expression of cathepsin B during metamorphosis. Significant developmental defective phenotypes were obtained in the RNAi treated group. The dramatically reduced expression of BmCtB was con^rmed by Northern blot and quantitative real-time PCR. These evidences strongly suggest cathepsin B proteinase was predominantly involved in the metabolism process of fat body and the posterior silk gland and was critical for metamorphism and development of silkworm, Bombyx mori.

关键词： cathepsin B RNA interference quantitative real-time PCR Bombyx mori

Applying Multiquadric Quasi-Interpolation to Solve KdV Equation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mathematical Research and Exposition 2011年第2期31卷 191-201页

作者： Min Lu XIAO Ren hong wang chun Gang ZHU School of Mathematical Sciences Dalian University of Technology Liaoning 116024 P. R. China

Quasi-interpolation is very useful in the study of approximation theory and its applications,since it can yield solutions directly without the need to solve any linear system of *** on the good performance,Chen and Wu presented a kind of multiquadric （MQ） quasi-interpolation,which is generalized from the L D operator,and used it to solve hyperbolic conservation laws and Burgers’ *** this paper,a numerical scheme is presented based on Chen and Wu’s method for solving the Korteweg-de Vries （KdV） *** presented scheme is obtained by using the second-order central divided difference of the spatial derivative to approximate the third-order spatial derivative,and the forward divided difference to approximate the temporal derivative,where the spatial derivative is approximated by the derivative of the generalized L D quasi-interpolation *** algorithm is very simple and easy to implement and the numerical experiments show that it is feasible and valid.

关键词： KdV equation multiquadric(MQ) quasi-interpolation numerical solution

Significantly Enhanced Melt Memory Effect of Metallocene-made Isotactic Polypropylene Containing Talc

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 213-222,I0008页

作者： hong-Wen Sun Fu-Shan wang Yan Gao Fu-Qing Wei Jia-chun Feng State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular ScienceFudan UniversityShanghai200433China Lanzhou Petrochemical Corporation of PetroChina Lanzhou730060China Lanzhou Petrochemical Research Center Petrochemical Research Institute of PetroChinaLanzhou730060China

The melt memory effect is a widely observed phenomenon in semi-crystalline polymers. In practical applications, various additives are usually introduced into polymers, which may affect their melt memory behavior. In this work, the effect of talc on the melt memory effect of metallocene-made isotactic polypropylene(M-PP) was investigated in detail by using the differential scanning calorimetry. The results indicated that the introduction of talc significantly strengthened the melt memory effect of M-PP. Specifically, the upper limit temperature of Domain II increased from 161 ℃ to 174 ℃, resulting in a substantial widening of the temperature range of Domain IIa from 1 ℃ to 14 ℃. Analysis of the crystal orientation of the M-PP containing talc cooled from various Ts suggested that the remarkably enhanced melt memory effect could be ascribed to the stabilization of oriented nuclei facilitated by talc. This stabilizing effect was likely attributable to the prefreezing effect or the sorption interaction between talc and the M-PP chains.

关键词： Metallocene-made isotactic polypropylene Talc Melt memory effect Crystal orientation

Microstructure Evolution and Nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting(CoCrNi)_(82)Al_(9)Ti_(9)High-Entropy Alloy

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1019-1033页

作者： hong-Wei Zhang Li-Wei Lan Zhe-Yu Yang Chang-chun Li Wen-Xian wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan030024China Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced MaterialsTaiyuan University of TechnologyTaiyuan030024China Shanxi-Zhejiang University New Materials and Chemical Research Institute Taiyuan030032China

In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were *** HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during *** leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of *** optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt *** the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al ***,the Ni element content increases significantly outside the melt *** process enhances the phase stability of FCC and facilitates phase ***,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale *** the melt pool,the accumulation of energy results in the formation of coarse ***,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 *** the fracture toughness outside the melt pool also *** with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.

关键词： High-entropy alloys Selective laser melting Microstructure evolution Nanoindentation

Effect of bariatric surgery on metabolism in diabetes and obesity comorbidity:Insight from recent research

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Diabetes 2024年第4期15卷 586-590页

作者： Hui-hong Tang Dong wang Cheng-chun Tang Department of Cardiology Zhongda HospitalSoutheast UniversityNanjing 210009Jiangsu ProvinceChina School of Medicine Southeast UniversityNanjing 210009Jiangsu ProvinceChina

Obesity is a prevalent cause of diabetes mellitus(DM)and is a serious danger to human *** 2 DM(T2DM)mostly occurs along with *** obesity-induced DM is caused by an excessive long-term diet and surplus *** surgery can improve the symptoms of T2DM in some obese *** different types of bariatric surgery may have different *** are some models built by researchers to discuss the surgical procedures’effects on me-tabolism in diabetes animal models and diabetes *** is high time to conclude all this effects and recommend procedures that can better improve metabolism.

关键词： Bariatric surgery Obesity Diabetes Animal models Diabetes patients

Double-confined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C toward ultra-stable Li-/Na-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2067-2079页

作者： Dan wang Qun Ma Huan He Zhi-Yuan wang Run-Guo Zheng hong-Yu Sun Yan-Guo Liu chun-Li Liu School of Materials Science and Engineering Northeastern UniversityShenyang110819China School of Resources and Materials Northeastern University at QinhuangdaoQinhuangdao 066004China Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province Qinhuangdao 066004China Department of Physics and Oxide Research Center Hankuk University of Foreign StudiesYongin 17035Korea

Antimony-based materials with high capacities and moderate potentials are promising anodes for lithium-/-sodium-ion ***,their tremendous volume expansion and inferior conductivity lead to poor structural stability and sluggish reaction ***,a doubleconfined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C has been fabricated through a solvothermal method followed by low-temperature heat *** dual protection of“MXene”and“carbon”can better accommodate the volume expansion of Sb/Sb_(2)S_(3).The strong covalent bond(Ti-S,Ti-O-Sb,C-O-Sb)can firmly integrate Sb-based material with Ti_(3)C_(2)T_(x)and carbon,which significantly improves the structure *** addition,the carbon layer can restrain the oxidation of MXenes,and the nano-Sb/Sb_(2)S_(3)can facilitate electron/ion transport and suppress the restacking of *** heterogeneous interface between Sb and Sb_(2)S_(3)can further promote interfacial charge *** MXene-Sb/Sb_(2)S_(3)@C-1 with the optimal Sb content shows high specific capacities,comparable rate properties and ultra-stable cycling performances(250 m Ah·g^(-1)after 2500 cycles at 1 A·g^(-1)for sodium-ion batteries).Ex situ X-ray diffractometer(XRD)test reveals the storage mechanism including the conversion and alloying process of MXene-Sb/Sb_(2)S_(3)@*** voltammetry(CV)test results demonstrate that the pseudocapacitance behavior is dominant in MXene-Sb/Sb_(2)S_(3)@C-1,especially at large *** design paves the way for exploring high-performance alloy-based/conversion-type anode for energy storage devices.

关键词： Sb/Sb_(2)S_(3) MXene Carbon Anode Lithium-ion batteries Sodium-ion batteries