检索结果-南通市图书馆

Journal of Iron and Steel Research(International) 2024年第1期31卷 1-2页

作者： Shuai Liu Jing Guo han-jie Guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China

Spanning three decades,Prof.han-jie Guo's research group has dedicated itself to exploring the fundamental theories and practical applications of physical chemistry within the realm of metallurgy.Operating under the a... 详细信息

关键词： chemistry liquid complexes

Physicochemical principles of hydrogen metallurgy in blast furnace

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第1期31卷 46-63页

作者： han-jie Guo School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing100083China

Based on the stoichiometric method and the free energy minimization method,an ideal model for the reduction of iron oxides by carbon and hydrogen under blast furnace conditions was established,and the reduction efficiency and theoretical energy consumption of the all-carbon blast furnace and the hydrogen-rich blast furnace were compared.The results show that after the reduction reaction is completed at the bottom of the blast furnace,the gas produced by reduction at 1600℃still has a certain excessive reduction capacity,which is due to the hydrogen brought in by the hydrogen-rich blast as well as the excess carbon monoxide generated by the reaction of the coke and the oxygen brought in by the blast.During the process of the gas with excessive reduction capacity rising from the bottom of the blast furnace and gas reduction process,the excessive reduction capacity of the gas gradually decreases with the increase in the dydrogen content in the blast.In the all-carbon blast furnace,the excess gas reduction capacity is the strongest,and the total energy consumption per ton of iron reduction is the lowest.This shows that,for the current operation mode of the blast furnace,adding hydrogen in the blast furnace cannot reduce the consumption of carbon required for reduction per ton of iron,but rather increases the consumption of carbon.

关键词： Hydrogen metallurgy Excess gas reduction capacity Theoretical energy consumption Hydrogen-rich blast furnace Thermodynamic model Gibbs minimum free energy method

A short review of antibacterial Cu-bearing stainless steel:antibacterial mechanisms,corrosion resistance,and novel preparation techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第1期31卷 24-45页

作者： Shuai Liu han-jie Guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials University of Science and Technology BeijingBeijing100083China

Cu-bearing stainless steel is widely used in the fields of food,medical and household sanitary equipment because of its surface finish and corrosion resistance.However,the growth of bacteria on stainless steel leads to the formation of biofilms,which causes corrosion.Therefore,the antibacterial property of stainless steel is a worthy research topic.Reviews of breakthroughs in the field of corrosion resistance and antimicrobial properties are still lacking.Herein,due to the scarcity of publications on the antibacterial mechanisms and processing methods of antibacterial Cu-bearing stainless steel,we review the current state of relevant research and progress.The toxicity of Cu,corrosion resistance mechanism of stainless steel,and antibacterial mechanism and preparation method of antibacterial stainless steel are reported.In addition,alloying,surface modification and other methods are found to have limitations in balancing the toxicity and antibacterial properties of copper and the relationship between the antibacterial properties and corrosion resistance of Cu-bearing stainless steel.A new preparation method of antibacterial stainless steel associated with selective laser melting(SLM)is proposed.SLM is becoming a powerful additive manufacturing technology that can be used to manufacture customized and complex metals.The research status of SLM applied in antibacterial stainless steel preparation is described.Finally,the future research direction of Cu-bearing antibacterial stainless steel is discussed.

关键词： Cu-bearing stainless steel Antibacterial Processing Additive manufacturing Corrosion resistance

Macroporous Directed and Interconnected Carbon Architectures Endow Amorphous Silicon Nanodots as Low‑Strain and Fast‑Charging Anode for Lithium‑Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第5期16卷 333-351页

作者： Zhenwei Li Meisheng han Peilun Yu Junsheng Lin jie Yu Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems Shenzhen Engineering Lab for Supercapacitor MaterialsSchool of Material Science and EngineeringHarbin Institute of TechnologyShenzhenUniversity TownShenzhen 518055People’s Republic of China Songshan Lake Materials Laboratory Dongguan Dongguan 523808GuangdongPeople’s Republic of China Department of Mechanical and Energy Engineering Southern University of Science and TechnologyShenzhen 518055People’s Republic of China

Fabricating low-strain and fast-charging silicon-carbon composite anodes is highly desired but remains a huge challenge for lithium-ion batteries.Herein,we report a unique silicon-carbon composite fabricated by uniformly dis-persing amorphous Si nanodots(SiNDs)in carbon nanospheres(SiNDs/C)that are welded on the wall of the macroporous carbon framework(MPCF)by vertical graphene(VG),labeled as MPCF@VG@SiNDs/C.The high dispersity and amor-phous features of ultrasmall SiNDs(~0.7 nm),the flexible and directed electron/Li+transport channels of VG,and the MPCF impart the MPCF@VG@SiNDs/C more lithium storage sites,rapid Li+transport path,and unique low-strain property during Li+storage.Consequently,the MPCF@VG@SiNDs/C exhibits high cycle stability(1301.4 mAh g^(-1) at 1 A g^(-1) after 1000 cycles without apparent decay)and high rate capacity(910.3 mAh g^(-1),20 A g^(-1))in half cells based on industrial electrode standards.The assembled pouch full cell delivers a high energy density(1694.0 Wh L^(-1);602.8 Wh kg^(-1))and an excellent fast-charging capability(498.5 Wh kg^(-1),charging for 16.8 min at 3 C).This study opens new possibilities for preparing advanced silicon-carbon com-posite anodes for practical applications.

关键词： Amorphous Si nanodots Low-strain Fast-charging Lithium-ion batteries

维普期刊数据库

Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第1期31卷 108-120页

作者： Zi-han Wang Jing Guo han-jie Guo Bin Li School of Metallurgical Engineering University of Science and Technology BeijingBeijing100083China School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina

A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in detail by using ther-modynamic equilibrium calculation and the principle of minimum free energy.The results showed that the main reaction in the system is the reduction of ZnFe_(2)_(4)and iron oxides.Over the full temperature range,iron oxides were more easily reduced than zinc oxides.Regardless of the amount of CO contained in the system,the reduction of ZnO to Zn was difficult to proceed below the boiling point(906℃)of Zn.When the reduction temperature is below 906℃,the reduction process of zinc ferrate was ZnFe_(2)_(4)→ZnO;when the reduction temperature is above 906℃,its reduction process becomed ZnFe_(2)_(4)→ZnO→Zn(g).The metallization and dezincification rates of the BFA gradually increased with increasing reaction temperature.As the C/O ratio increased,the metallization and dezincification rates first increased and then decreased.The effect of reduction time on BFA reduction was similar to that of reaction temperature.

关键词： Blast furnace gas ash Thermodynamics Zinc removal Iron reduction High-temperature reduction roasting Integrated utilization

A Simple Proof of ACC for Minimal Log Discrepancies for Surfaces

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 425-434页

作者： Jing Jun han Yu jie LUO Shanghai Center for Mathematical Sciences Fudan UniversityJiangwan CampusShanghai 200438P.R.China Department of Mathematics Johns Hopkins UniversityBaltimoreMD 21218USA

Following Shokurov's idea,we give a simple proof of the ACC conjecture for minimal log discrepancies for surfaces.

关键词： Ascending chain condition minimal log discrepancies minimal model program surface

维普期刊数据库

Concomitant treatment of ureteral calculi and ipsilateral pelvic sciatic nerve schwannoma with transperitoneal laparoscopic approach: A case report

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第11期12卷 1947-1953页

作者： Yang Xiong Jin Li han-jie Yang Department of Urology Pingxiang People’s HospitalPingxiang 337000Jiangxi ProvinceChina

BACKGROUND Schwannomas are rare peripheral neural myelin sheath tumors that originate from Schwann cells.Of the different types of schwannomas,pelvic sciatic nerve schwannoma is extremely rare.Definite preoperative diagnosis of pelvic schwannomas is difficult,and surgical resection is the gold standard for its definite diagnosis and treatment.CASE SUMMARY We present a case of pelvic schwannoma arising from the sciatic nerve that was detected in a 40-year-old man who underwent computed tomography for intermittent right lower back pain caused exclusively by a right ureteral calculus.Subsequently,successful transperitoneal laparoscopic surgery was performed for the intact removal of the stone and en bloc resection of the schwannoma.The total operative time was 125 min,and the estimated blood loss was inconspicuous.The surgical procedure was uneventful.The patient was discharged on postoperative day 5 with the simultaneous removal of the urinary catheter.However,the patient presented with motor and sensory disorders of the right lower limb,caused by partial damage to the right sciatic nerve.No tumor recurrence was observed at the postoperative appointment.CONCLUSION Histopathological examination of the specimen confirmed the diagnosis of a schwannoma.Thus,laparoscopic surgery is safe and feasible for concomitant extirpation of pelvic schwannomas and other pelvic and abdominal diseases that require surgical treatment.

关键词： Schwannoma Sciatic nerve Laparoscopy Ureteral calculi Pelvic neoplasms Case report

Printable,flexible ceramic fiber paper based on electrospinning

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2739-2746页

作者： Yong-Shuai Xie Yuan Cheng Yang Lyu Rui Li jie-Cai han National Key Laboratory of Science and Technology on Advanced Composites in Special Environments Harbin Institute of Technology State Key Laboratory of Intelligent Manufacturing Equipment and Technology Huazhong University of Science and Technology

Based on the fact that it is challenging for the polymer flexible circuit substrates to meet the requirements of serving in high-temperature environments,this work proposed the idea of using printable ceramic fiber paper as a high-temperature flexible circuit substrate.A ceramic fiber paper with all ceramic components had been developed via electrospinning,solving the problems of low strength and severe strength drop at high temperatures of traditional ceramic fiber paper.The tensile strength of the prepared ceramic fiber paper is 2.63 MPa,and the reliable service temperature is 1200℃.Its bulk density is about 1.5 times that of traditional ceramic fiber paper.It can be printed with patterns by commercial inkjet printers like ordinary printing paper and has excellent printability.The feasibility of ceramic fiber paper as a flexible circuit substrate was verified by constructing a simple circuit.When the fiber paper is significantly bent,the circuit still forms a complete path,which proves that it has a strong application potential for high-temperature flexible circuit substrate and is expected to promote the development of flexible electronic devices serving at extreme high-temperature environments.

关键词： Ceramic fiber paper High temperature Inkjet printing Flexible electronic

FeNi Prussian blue analogues on highly graphitized carbon nanosheets as efficient glucose sensors

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2730-2738页

作者： Jin-hang Xue Qiu-Hong Sun Cheng han Yuan-Dong Yang Shao-jie Xu Qi-Peng Li Jin-jie Qian College of Life and Environmental Science Wenzhou University College of Chemistry and Materials Engineering Wenzhou University College of Chemistry and Chemical Engineering Zhaotong University

Meeting the continuous glucose monitoring requirements of individuals necessitates the research and development of sensors with high sensitivity and stability.In this study,a straightforward strategy was proposed for synthesizing ultra-thin oxygen-rich graphitized carbon nanosheets（denoted as GCS-O）.These nanosheets are obtained by calcining a topologically two-dimensional indium-based coordination polymer.Subsequently,the growth of FeNi Prussian blue analogue（PBA） on GCS-O effectively introduces active sites and increases the nitrogen content within the carbonaceous matrix.The resulting FeNi-PBA/GCS-O composite exhibits excellent glucose sensing performance with a broad linear range of 1 to 1300μmol·L-1.Meanwhile,it also achieves a high sensitivity of 2496 μA·mmol-1·L·cm-2,a limit of detection of 100nmol·L-1（S/N=3）,and commendable long-term durability.The relatively simple synthesis process,exceptional sensitivity,and satisfactory electrochemical sensing performance of FeNi-PBA/GCS-O open up new directions for biosensor applications.

关键词： Coordination polymer Carbon nanosheet Prussian blue analogue Surface reconstruction Glucose oxidation

M2 macrophage-related molecular subtypes and prognostic index for prostate cancer patients through integrating single-cell and bulk RNA sequencing analysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Genes & Diseases 2024年第4期11卷 131-133页

作者： Dechao Feng Xu Shi Dengxiong Li Ruicheng Wu jie Wang Wuran Wei Ping han Department of Urology Institute of UrologyWest China HospitalSichuan UniversityChengduSichuan 610041China

Prostate cancer(PCa)is considered as an age-related disease and accounts for the most prevalence of urinary malignancies in men.1 We previously analyzed the cellular landscape of tumor microenvironment in PCa patients,where we found that cancer-related fibroblasts might play an important role in tumorigenesis and the development of PCa and tumor-associated macrophage(TAM)could function synergistically with them.2 Thus,we further integrated single-cell and bulk RNA sequencing with meta-analysis to specify the prognostic effect of TAM on PCa and construct molecular subgroups and predictive index to guide clinical practice.

关键词： patients macrophage cancer