检索结果-南通市图书馆

Prediction Model of Kinetic Energy Conversion of Tandem Dual-Oscillator Based on Flow-Induced Vibration Experiment

China Ocean Engineering 2022年第5期36卷 707-719页

作者： BAI Xu SUN Meng han chuan-yu SUN Hai School of Naval Architecture&Ocean Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Marine Renewable Energy Laboratory Department of Naval Architecture&Marine EngineeringUniversity of MichiganAnn Arbor MI 48109-2145USA College of Aerospace and Civil Engineering Harbin Engineering UniversityHarbin 150001China

Flow-induced vibration energy harvesting devices typically use an elastically supported body immersed in an oncoming flow to convert the sea and river current's hydrokinetic energy into electrical energy.The proportion of energy the device collects is greatly influenced by parameters such as the water flow velocity,spacing between device components,structure size,and damping coefficient.For parameter optimization and performance predictions of flow-induced vibration energy harvesting devices,we train a model of the power harvesting efficiency under different damping ratios,stiffnesses,spacing ratios,and reduced velocities based on experimental data.To improve the prediction accuracy,a feedforward network structure is optimized by using the topological evolutionary algorithm and a radial basis function network.Comparative analysis reveals that the radial basis function network model provides the best agreement with the experimental results and realizes accurate predictions of the power harvested by a dual-oscillator system in the vortex-induced vibration,transition region,and galloping.The prediction results show that the model's maximum power harvesting efficiency occurs in the vortex-induced vibration.The efficiency increases and then decreases with increasing stiffness and reduced velocity in this phase;an increase in the spacing ratio causes the effi-ciency to decrease and then increase;finally,increasing the damping ratio enhances the efficiency.The device achieves maximum power harvesting efficiency at a reduced velocity of U_(r)=4.11.The proposed model effectively predicts the maximum efficiency and the corresponding damping ratio and stiffness of the vortex-induced vibration and galloping,providing a new method for predicting tandem dual-oscillator hydrodynamic power conversion in flow-induced vibration.

关键词： flow-induced vibration tandem double-oscillator radial basis function prediction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Macroporous Directed and Interconnected Carbon Architectures Endow Amorphous Silicon Nanodots as Low‑Strain and Fast‑Charging Anode for Lithium‑Ion Batteries

引用

Nano-Micro Letters 2024年第5期16卷 333-351页

作者： Zhenwei Li Meisheng han Peilun yu Junsheng Lin Jie yu Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems Shenzhen Engineering Lab for Supercapacitor MaterialsSchool of Material Science and EngineeringHarbin Institute of TechnologyShenzhenUniversity TownShenzhen 518055People’s Republic of China Songshan Lake Materials Laboratory Dongguan Dongguan 523808GuangdongPeople’s Republic of China Department of Mechanical and Energy Engineering Southern University of Science and TechnologyShenzhen 518055People’s Republic of China

Fabricating low-strain and fast-charging silicon-carbon composite anodes is highly desired but remains a huge challenge for lithium-ion batteries.Herein,we report a unique silicon-carbon composite fabricated by uniformly dis-persing amorphous Si nanodots(SiNDs)in carbon nanospheres(SiNDs/C)that are welded on the wall of the macroporous carbon framework(MPCF)by vertical graphene(VG),labeled as MPCF@VG@SiNDs/C.The high dispersity and amor-phous features of ultrasmall SiNDs(~0.7 nm),the flexible and directed electron/Li+transport channels of VG,and the MPCF impart the MPCF@VG@SiNDs/C more lithium storage sites,rapid Li+transport path,and unique low-strain property during Li+storage.Consequently,the MPCF@VG@SiNDs/C exhibits high cycle stability(1301.4 mAh g^(-1) at 1 A g^(-1) after 1000 cycles without apparent decay)and high rate capacity(910.3 mAh g^(-1),20 A g^(-1))in half cells based on industrial electrode standards.The assembled pouch full cell delivers a high energy density(1694.0 Wh L^(-1);602.8 Wh kg^(-1))and an excellent fast-charging capability(498.5 Wh kg^(-1),charging for 16.8 min at 3 C).This study opens new possibilities for preparing advanced silicon-carbon com-posite anodes for practical applications.

关键词： Amorphous Si nanodots Low-strain Fast-charging Lithium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Elimination of methicillin‑resistant Staphylococcus aureus biofilms on titanium implants via photothermally‑triggered nitric oxide and immunotherapy for enhanced osseointegration

引用

Military Medical Research 2024年第2期11卷 157-179页

作者： Yong‑Lin yu Jun‑Jie Wu chuan‑chuan Lin Xian Qin Franklin R.Tay Li Miao Bai‑Long Tao Yang Jiao Department of Pathology Affiliated Hospital of Zunyi Medical UniversityZunyi 563003GuizhouChina Laboratory Research Center the First Affiliated Hospital of Chongqing Medical UniversityChongqing 400016China Department of Blood Transfusion Laboratory of Radiation Biologythe Second Affiliated HospitalArmy Military Medical UniversityChongqing 400037China Department of Reproductive Endocrinology Chongqing Health Center for Women and ChildrenChongqing 401147China The Graduate School Augusta UniversityAugustaGA 30912USA Department of Stomatology the Seventh Medical Center of PLA General HospitalBeijing 100700China

Background:Treatment of methicillin-resistant Staphylococcus aureus(MRSA)biofilm infections in implant placement surgery is limited by the lack of antimicrobial activity of titanium(Ti)implants.There is a need to explore more effective approaches for the treatment of MRSA biofilm infections.Methods:Herein,an interfacial functionalization strategy is proposed by the integration of mesoporous polydopamine nanoparticles(PDA),nitric oxide(NO)release donor sodium nitroprusside(SNP)and osteogenic growth peptide(OGP)onto Ti implants,denoted as Ti-PDA@SNP-OGP.The physical and chemical properties of Ti-PDA@SNP-OGP were assessed by scanning electron microscopy,X-ray photoelectron spectroscope,water contact angle,photothermal property and NO release behavior.The synergistic antibacterial effect and elimination of the MRSA biofilms were evaluated by 2′,7′-dichlorofluorescein diacetate probe,1-N-phenylnaphthylamine assay,adenosine triphosphate intensity,O-nitrophenyl-β-D-galactopyranoside hydrolysis activity,bicinchoninic acid leakage.Fluorescence staining,assays for alkaline phosphatase activity,collagen secretion and extracellular matrix mineralization,quantitative real‑time reverse transcription‑polymerase chain reaction,and enzyme-linked immunosorbent assay(ELISA)were used to evaluate the inflammatory response and osteogenic ability in bone marrow stromal cells(MSCs),RAW264.7 cells and their co-culture system.Giemsa staining,ELISA,micro-CT,hematoxylin and eosin,Masson's trichrome and immunohistochemistry staining were used to evaluate the eradication of MRSA biofilms,inhibition of inflammatory response,and promotion of osseointegration of Ti-PDA@SNP-OGP in vivo.Results:Ti-PDA@SNP-OGP displayed a synergistic photothermal and NO-dependent antibacterial effect against MRSA following near-infrared light(NIR)irradiation,and effectively eliminated the formed MRSA biofilms by inducing reactive oxygen species(ROS)-mediated oxidative stress,destroying bacterial membrane integrity and causing leakage of intracellular components(P<0

关键词： Polydopamine nanoparticles Methicillin-resistant Staphylococcus aureus Nitric oxide Osseointegration Osteo-immunomodulation Photothermal effect Titanium implants

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

On Stability Discrimination of Limit Cycles for Piecewise Smooth Systems

引用

Acta Mathematica Sinica,English Series 2024年第7期40卷 1785-1803页

作者： Mao An han Xia yu ZHOU School of Mathematical Sciences Zhejiang Normal University

This paper is concerned with the problem of stability discrimination of limit cycles for piecewise smooth systems. We first establish the Poincar′e map near a periodic orbit, and deduce the first order derivative of the map for general piecewise smooth systems on the plane. Then, we obtain a sufficient condition for determining the stability of limit cycles for these systems.

关键词： Piecewise smooth system limit cycle stability 34C07 34C23

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Simple Proof of ACC for Minimal Log Discrepancies for Surfaces

引用

Acta Mathematica Sinica,English Series 2024年第2期40卷 425-434页

作者： Jing Jun han yu Jie LUO Shanghai Center for Mathematical Sciences Fudan UniversityJiangwan CampusShanghai 200438P.R.China Department of Mathematics Johns Hopkins UniversityBaltimoreMD 21218USA

Following Shokurov's idea,we give a simple proof of the ACC conjecture for minimal log discrepancies for surfaces.

关键词： Ascending chain condition minimal log discrepancies minimal model program surface

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Molecular dynamics study of hydrogen-induced cracking behavior of ferrite–pearlite gas transmission pipeline steel

引用

Journal of Iron and Steel Research(International) 2024年第2期31卷 488-500页

作者： Tao-long Xu Si-han Guo Gong-zhen He Hao-yu han Petroleum Engineering School Southwest Petroleum UniversityChengdu610500SichuanChina Sichuan East Gas Transmission Sales Center of Sinopec Natural Gas Branch Wuhan430074HubeiChina

Hydrogen embrittlement of pipelines depends on the hydrogen-induced cracking behavior of the pipeline steel microstructure.Based on molecular dynamics analysis,the ferrite–cementite(α-Fe/Fe3C)lamellar atomic structure with the Bagaryatskii orientation relationship was established,and stepwise relaxation of the conjugate gradient energy minimization and constant-temperature and constant-pressure relaxation were performed under NPT(the isothermal–isobaric)conditions.The mechanical property curves of theα-Fe/Fe3C models were obtained under different cementite terminal plane structures,and the evolution of the atomic structure was analyzed in detail.In addition,the influence of different hydrogen concentrations,different temperatures,different strain rates,changes in voids,and different micro-degrees of freedom on the deformation and failure mechanism of the model was investigated,aiming to provide a reliable way to explore the micro-mechanism of macro-cracking behavior of pipeline steel.

关键词： Ferrite-cementite lamellar structure Pipeline steel Failure mechanism Crack propagation Molecular dynamics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photoinduced superlubricity on TiO_(2) surfaces

引用

Friction 2024年第3期12卷 428-438页

作者： Ke han Liran MA yu TIAN Jianbin LUO State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Received:16 September 2022/Revised:28 October 2022/Accepted:27 December 2022The author(s)2022.

Superlubricity control is of great interest in both industry and scientific research,and several methods have been proposed to achieve this goal.In this work,ultraviolet(UV)light was introduced into titanium dioxide(TiO_(2))and silicon nitride(Si_(3)N_(4))tribosystems to accomplish photoinduced superlubricity.The friction coefficients(COFs)between Si_(3)N_(4) balls and TiO_(2) plates in the mixtures of sulfuric acid(H^(2)SO_(4))solution and glycerol solution were obviously reduced,and the system entered the superlubricity region(COFhan that with UV treatment.The formation of silica(SiO_(2))layers on the surfaces of Si_(3)N_(4) balls and the elastohydrodynamic effects were determined to be fundamental to the low friction in this experiment,and the enhancement of the combination between the TiO_(2) surface and the hydroxy group of glycerol by UV illumination was the key to the photoinduced superlubricity in this system.These findings showed one method for achieving superlubricity by introducing a light field that could be further applied to special working conditions.

关键词： light control friction superlubricity glycerol titanium dioxide(TiO_(2))

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Investigation on the influence of vortex generator on particle resuspension

引用

Particuology 2024年第3期86卷 126-136页

作者： Dongchi yu Jun-Li Lin Jin-han Xie ASML 80W Tasman DrSan Jose95134CaliforniaUSA Department of Mechanics and Engineering Science at College of Engineering and State Key Laboratory for Turbulence and Complex Systems Peking UniversityBeijing100081China

The vortex generator(VG)and its well-known effect in flow optimization are widely studied and employed across different engineering sectors.However,while the same working principles of VG may be well suited for the applications on surface-cleaning technologies,such promising potential is hardly,if any,explored in the published literature.Therefore,in the present study,the influence on flow-induced particle resuspension brought by a rectangular vG in a channel flow is investigated with the help of highfidelity computational fluid dynamics simulations.Substantial increases of particle removal forces and resuspension rates are discovered in long,strip-like regions with reduced boundary-layer thickness resulted from the vG-induced vortices,and the enhancement effect is especially significant for configurations with the VG installed at a greater angle of attack.It is also shown that while the resuspension enhancements on the lower and the upper surfaces of the channel exhibit distinct statistical characteristics,having a VG in the channel improves the overall particle-removing capability of the channel flow by introducing higher surface-averaged removal forces and particle resuspension rates.Last but not least,the increase of resuspension rate is especially significant for the smaller,micron-scale particles which are otherwise hardly disturbed by a VG-less channel flow,and such resuspension-enhancement effectgenerally subsides with increasing particle size.

关键词： Particle resuspension Vortexgenerator CFD Surface cleaning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of BaO and MgO on structure and properties of aluminate slag with various CaO/Al_(2)0_(3)ratios

引用

Journal of Iron and Steel Research(International) 2024年第1期31卷 204-214页

作者： yu-qi Kong Ting Wu Wen-zhi Xia Wen Yang Hai-chuan Wang School of Metallurgical Engineering Anhui University of TechnologyMa’anshan243032AnhuiChina Key Laboratory of Metallurgical Emission Reduction and Resource Recycling(Ministry of Education) Anhui University of TechnologyMa’anshan243002AnhuiChina

To provide theoretical guidance for performance stability control of low-reactive mold fluxes,the effects of BaO and MgO on the structure and properties of aluminate slag with various CaO/Al_(2)0_(3)(C/A)ratios were investigated using the Fourier transform infrared spectrometer,Raman spectroscope,hemispherical melting point instrument,rotational viscometer and X-ray diffractometer.The results indicated that with BaO and MgO addition,the structure polymerization was first weakened and then enhanced at C/A of 1.1,and the transition contents corresponded to 8 wt.%BaO and 2 wt.%MgO,respectively,while the structure polymerization decreased continuously at C/A of 1.3.Since the viscosity change was well consistent with the structure evolution,the polymerization degree played a more prominent role in the slag viscosity than superheat degree when the melting temperature difference was within 40℃.The break temperature decreased initially and then increased with augment of BaO and MgO at C/A of 1.1,while it manifested a decrease trend with BaO addition,and it decreased obviously but then turned to increase with MgO increment at C/A of 1.3.The crystallization phase and crystallization ratio kept stable with BaO increment,while the crystallization ratio rose greatly with MgO promoting LiAlO_(2)precipitation at C/A of 1.1.The crystal types of all experimental slags were mainly Ca_(12)Al_(14)O_(33)and CaF_(2)at C/A of 1.3,and the precipitation of crystalline phase BaAl2O4 demonstrated a rising trend,while that of Ca_(12)Al_(14)O_(33)gradually declined with BaO augment.

关键词： Aluminate slag Structure MgO BaO Viscosity Property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon-based interface engineering and architecture design for high-performance lithium metal anodes

引用

Carbon Energy 2024年第1期6卷 207-235页

作者： Na Zhu yuxiang Yang yu Li Ying Bai Junfeng Rong chuan Wu SINOPEC Research Institute of Petroleum Processing Co. Ltd.BeijingChina Beijing Key Laboratory of Environmental Science and Engineering School of Materials Science and EngineeringBeijing Institute of TechnologyBeijingChina Yangtze Delta Region Academy of Beijing Institute of Technology JiaxingChina

Metallic lithium(Li)is considered the“Holy Grail”anode material for the nextgeneration of Li batteries with high energy density owing to the extraordinary theoretical specific capacity and the lowest negative electrochemical potential.However,owing to inhomogeneous Li-ion flux,Li anodes undergo uncontrollable Li deposition,leading to limited power output and practical applications.Carbon materials and their composites with controllable structures and properties have received extensive attention to guide the homogeneous growth of Li to achieve high-performance Li anodes.In this review,the correlation between the behavior of Li anode and the properties of carbon materials is proposed.Subsequently,we review emerging strategies for rationally designing high-performance Li anodes with carbon materials,including interface engineering(stabilizing solid electrolyte interphase layer and other functionalized interfacial layer)and architecture design of host carbon(constructing three-dimension structure,preparing hollow structure,introducing lithiophilic sites,optimizing geometric effects,and compositing with Li).Based on the insights,some prospects on critical challenges and possible future research directions in this field are concluded.It is anticipated that further innovative works on the fundamental chemistry and theoretical research of Li anodes are needed.

关键词： carbon materials dendrites hosts interfacial layers Li metal anodes

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：