检索结果-南通市图书馆

CO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(Cu,Co,Ag and Pt)

引用

journal of Rare Earths 2024年第9期42卷 1669-1681页

作者： j.C.martínez-munuera m.P.Yeste A.García-García mCmA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of Alicante Solid Chemistry and Catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of Cádiz

In this work,several ceria-zirconia based catalysts with very lo w（and equimolar） metal contents were prepared,characterised and tested for the CO oxidatio n reaction（under lean and stoichiometric conditions）,trying to emulate those conditions found in a diesel oxidation catalyst（DOC） system from a diesel engine and those encountered under gasoline exhaust（λ=1）.The metals chosen are Cu,Co,Ag and Pt（as a reliable benchmark）.The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion（Ag-catalyst seems to present a low level of dispersion）.This catalyst seems to be characterised,as well,by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H2-TPR ***,the order in catalytic activity（Cu>Ag>Co≈Pt>>support） seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped CO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce0.8Zr0.2O2-supported metal catalysts is ***,OSC parameter measured at 150℃ can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H2-TPR measurements.

关键词： CO oxidation Low metal content Ceria-zirconia Copper species OSC parameter Rare earths

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Single atom Cu-N-C catalysts for the electro-reduction of CO_(2) to CO assessed by rotating ring-disc electrode

引用

journal of Energy Chemistry 2024年第1期88卷 169-182,I0004页

作者： S.Pérez-Rodríguez m.Gutiérrez-Roa C.Giménez-Rubio D.Ríos-Ruiz P.Arévalo-Cid m.V.martínez-Huerta A.Zitolo m.j.Lázaro D.Sebastián Instituto de Carboquímica(CSIC) Miguel Luesma Castán 450018 ZaragozaSpain Instituto de Catálisis y Petroleoquímica(CSIC) Marie Curie 228049 MadridSpain Synchrotron SOLEIL L’Orme des MerisiersDépartementale 12891190France

The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped carbon xerogel(Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO_(2)RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode(RRDE), technique still rarely explored for CO_(2)RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-NC catalysts are found to be active and highly CO selective at low overpotentials(from -0.6 to -0.8 V ***) in 0.1 m KHCO_(3), while H_(2) from the competitive water reduction appears at larger overpotentials(-0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N_(4) moieties exhibits a CO_(2)-to-CO turnover frequency of 997 h^(-1) at -0.9 V vs. RHE with a H_(2)/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO_(2)RR.

关键词： Cu-N-C Carbon xerogel Rotating ring disc electrode Carbon dioxide reduction reaction Carbon monoxide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental test of a building thermal system for preventive maintenance based on thermoeconomic analysis

引用

Energy Storage and Saving 2024年第1期3卷 42-51页

作者： I.Prol-Godoy A.Picallo-Perez j.m.Sala-Lizarraga j.Rey-martínez Research group ENEDI Department of Thermal EngineeringUniversity of the Basque Country(UPV/EHU)Bilbao48013Spain Research Group Termotecnia University of ValladolidValladolid47002Spain

An analysis of the sectorial structure of energy consumption shows that residential and tertiary sector buildings are the third-highest consumers,responsible for 29.5%of a city’s final energy *** Building Quality Control Laboratory of the Basque Government aims to promote quality,innovation,and sustainability in *** accomplish this goal,it has constructed an experimental facility with different energy generation technologies and a very versatile control system for testing different energy systems and operation *** this study,we tested a facility for supplying domestic hot water and heating for a multi-family house by means of a condensing boiler and an aerothermal heat pump(together with the corresponding control).This installation could reproduce the thermal demands required to be satisfied by the generation equipment through a programmed operation of the installation based on real ***,this installation was analyzed using thermoeconomics(TE)to solve problems unable to be solved using traditional energy analyses based on the First Law of *** problems include:(1)Determining the costs of the products of the installation based on physical criteria,(2)detecting the places where losses actually occur,evaluating their costs,and proposing cost-effective improvements,and(3)diagnosing issues in the *** a result,this paper suggests a solution to the preventive maintenance problems confronting the technical maintenance personnel for thermal installations in buildings by applying TE knowledge and using real data collected from sensors.

关键词： Experimental essay Energy savings in thermal systems Thermoeconomics Thermoeconomic costs Diagnosis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Tutorial on Federated Learning from Theory to Practice:Foundations,Software Frameworks,Exemplary Use Cases,and Selected Trends

引用

IEEE/CAA journal of Automatica Sinica 2024年第4期11卷 824-850页

作者： m.Victoria Luzón Nuria Rodríguez-Barroso Alberto Argente-Garrido Daniel jiménez-López jose m.moyano javier Del Ser Weiping Ding Francisco Herrera Department of Software Engineering Andalusian Research Institute in Data Science and Computational Intelligence(DaSCI)University of GranadaGranada 18071Spain Department of Computer Science and Artificial Intelligence Andalusian Research Institute in Data Science and Computational Intelligence(DaSCI)University of GranadaGranada 18071Spain Department of Communications Engineering University of the Basque Country(UPV/EHU)and also with TECNALIABasque Research&Technology Alliance(BRTA)Spain School of Information Science and Technology Nantong UniversityNantong 226019China

When data privacy is imposed as a necessity,Federated learning(FL)emerges as a relevant artificial intelligence field for developing machine learning(mL)models in a distributed and decentralized *** allows mL models to be trained on local devices without any need for centralized data transfer,thereby reducing both the exposure of sensitive data and the possibility of data interception by malicious third *** paradigm has gained momentum in the last few years,spurred by the plethora of real-world applications that have leveraged its ability to improve the efficiency of distributed learning and to accommodate numerous participants with their data *** virtue of FL,models can be learned from all such distributed data sources while preserving data *** aim of this paper is to provide a practical tutorial on FL,including a short methodology and a systematic analysis of existing software ***,our tutorial provides exemplary cases of study from three complementary perspectives:i)Foundations of FL,describing the main components of FL,from key elements to FL categories;ii)Implementation guidelines and exemplary cases of study,by systematically examining the functionalities provided by existing software frameworks for FL deployment,devising a methodology to design a FL scenario,and providing exemplary cases of study with source code for different mL approaches;and iii)Trends,shortly reviewing a non-exhaustive list of research directions that are under active investigation in the current FL *** ultimate purpose of this work is to establish itself as a referential work for researchers,developers,and data scientists willing to explore the capabilities of FL in practical applications.

关键词： Data privacy distributed machine learning federated learning software frameworks

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

引用

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interpolation of closed ideals of bilinear operators

引用

Acta mathematica Sinica,English Series 2024年

作者： Fernando COBOS Luz m.FERNáNDEZ-CABRERA Antón mArtínez Departamento de Análisis matemático y matemática Aplicada Facultad de MatemáticasUniversidad Complutense de Madrid Sección Departamental del Departamento de Análisis matemático y matemática Aplicada Facultad de Estudios EstadísticosUniversidad Complutense de Madrid Departamento de matemática Aplicada I Escuela de Ingeniería IndustrialUniversidad de Vigo

AbstractWe extend the （outer） measureγIassociated to an operator ideal I to a measureγjfor bounded bilinear *** I is surjective and closed,and j is the class of those bilinear operators such thatγj（T）=0,we prove that j coincides with the composition bideal I o *** I satisfies the ∑r-condition,we establish a simple necessary and sufficient condition for an interpolated operator by the real method to belong to ***,if in addition I is symmetric,we prove a formula for the measureγjof an operator interpolated by the real *** particular,results apply to weakly compact operators.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solid-liquid extraction for yttrium recovery using porous polymeric resin（XAD-7） functionalized with D2EHPA

引用

journal of Rare Earths 2024年第9期42卷 1764-1773页

作者： P.A.martínez-montoya R.G.Sanchez-Alvarado D.Y.medina-Velazquez m.L.Carrera-jota P.Garnica-Chávez A.de j.morales-Ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical Engineering metropolitan Autonomous University Department of MaterialsBasic Sciences and Engineering Center for Research and Technological Innovation CIITECIPN

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid（D2EHPA） as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7（solid phase）.Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/L Y（liquid phase） at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid（S/L）ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D2EHPA functionalized resin,pH=1.5 and an S/L ratio of 10 mg/mL The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/L [H2SO4] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H2SO4,demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Fluorescent lamps recycling Rare earth solid-liquid extraction Solid-liquid kinetics extraction XAD-7 resin Yttrium recovery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

引用

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FOrtRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Consumer transparency in the production chain for plant varieties produced using new genomic techniques

引用

aBIOTECH 2024年第2期5卷 239-246页

作者： j.m.Lukasiewicz C.C.m.van de Wiel L.A.P.Lotz m.j.m.Smulders Wageningen University&Research P.O.Box 386NL-6700 AJ WageningenThe Netherlands

Plants edited with new genomic techniques(NGTs)currently fall under the Genetically modified Organisms Directive(2001/18/EC)in the European *** the proposal of the European Commission,NGT plants are partially exempted from the regulations of this *** proposal makes a distinction between two categories of NGT plants:NGT-1 and ***-1 category plants are considered equal to plants obtained through conventional breeding *** plants will not be labelled for the consumer,although they will be labelled as ***-2 category plants may be labelled with additional information as a positive *** of seeds of varieties made with gene editing,but not the products,would mean that most steps in the production chain are transparent,but not the last step towards ***“right to know”and increasing knowledge of gene-edited food is a common theme in food labelling towards ***,we describe current labelling regimes and registers and how these may be applied to provide transparency on gene-edited products to ***,we also look into consumer studies,which indicate a greater acceptance of gene-edited food among consumers,especially when additional benefits such as sustainability are mentioned.

关键词： Labelling New genomic techniques Consumer transparency Plant products

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：