检索结果-南通市图书馆

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation Center for Materials Genome Engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Engineering Research Center for Advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Neural network modeling and prediction of HfO2 thin film properties tuned by thermal annealing

引用

High Power Laser Science and Engineering 2024年第2期12卷 79-86页

作者： Min gao Chaoyi Yin Jianda Shao Meiping Zhu School of Microelectronics Shanghai UniversityShanghaiChina Laboratory of Thin Film Optics Key Laboratory of Materials for High Power LaserShanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijingChina Hangzhou Institute for Advanced Study University of Chinese Academy of SciencesHangzhouChina

Plasma-enhanced atomic layer deposition (PEALD) is gaining interest in thin films for laser applications, and post-annealing treatments are often used to improve thin film properties. However, research to improve thin film properties is often based on an expensive and time-consuming trial-and-error process. In this study, PEALD-HfO2 thin film samples were deposited and treated under different annealing atmospheres and temperatures. The samples were characterized in terms of their refractive indices, layer thicknesses and O/Hf ratios. The collected data were split into training and validation sets and fed to multiple back-propagation neural networks with different hidden layers to determine the best way to construct the process–performance relationship. The results showed that the three-hidden-layer back-propagation neural network (THL-BPNN) achieved stable and accurate fitting. For the refractive index, layer thickness and O/Hf ratio, the THL-BPNN model achieved accuracy values of 0.99, 0.94 and 0.94, respectively, on the training set and 0.99, 0.91 and 0.90, respectively, on the validation set. The THL-BPNN model was further used to predict the laser-induced damage threshold of PEALD-HfO2 thin films and the properties of the PEALD-SiO2 thin films, both showing high accuracy. This study not only provides quantitative guidance for the improvement of thin film properties but also proposes a general model that can be applied to predict the properties of different types of laser thin films, saving experimental costs for process optimization.

关键词： laser-induced damage threshold laser thin film neural network plasma-enhanced atomic layer deposition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hydrochemical insights on the signatures and genesis of water resources in a high-altitude city on the Qinghai-Xizang Plateau, South-west China

引用

Frontiers of Environmental Science & Engineering 2024年第7期18卷 123-140页

作者： Jiutan Liu Kexin Lou Zongjun gao Menghan Tan College of Earth Science and Engineering Shandong University of Science and TechnologyQingdao 266590China

Water resources have crucial implications for the steady development of the urban social *** study investigated the hydrochemical signatures and genesis of water resources in the urban area of Lhasa City(UALC).To this end,several analyses,such as ion ratio analysis and correlation analysis,were performed by comprehensively applying mathematical statistics and integrated hydrochemical *** results show relatively low concentrations of major ions in the groundwater and surface water(GSW)of the *** primary anions and cations are HCO3-and Ca2+,reflecting the HCOg-Ca water ***,groundwater exhibits higher concentrations of key chemical components compared to surface *** are weakly alkaline,with pH values of 7.78 and 7.61,respectively,and they have low salinity with average concentrations of total dissolved solids being 190.74 and 112.17 mg/L,*** inputs have minimal influence on the hydrochemical features of GSw,whereas rock weathering is the dominant controlling ***,cation *** a significant *** influencing their hydrochemical *** to the isotope analysis(H and 180),the primary source of recharge for GSW is atmospheric precipitation,with some input from melted ice and ***,GSW samples from the UALC show relatively similar 2H and 18O isotopic compositions,indicating the existence of a discernible hydraulic connection linking the two water *** research findings can serve as a valuable scientific reference and foundation for the sustainable development,effective utilization,and proper safeguarding of regional water resources in high-altitude areas.

关键词： Groundwater and surface water Hydrochemical features Genesis mechanism Water quality Urban area of Lhasa City

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

引用

Petroleum Science 2024年第3期21卷 2005-2022页

作者： Shuo Peng Wen-Jun Huang De-Li gao MOE Key Laboratory of Petroleum Engineering China University of Petroleum-BeijingBeijing102249China State Key Laboratory of Petroleum Resources and Engineering China University of Petroleum-BeijingBeijing102249China

In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the *** cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial *** bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring *** paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning ***,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was ***,an evaluation method of hole cleaning effect of remover was *** that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were *** results demonstrate that the new type of remover with streamline blade performs better than conventional *** efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling *** higher rate of penetration and large wellbore size result in worse hole *** findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

关键词： Extended-reach drlling Drilling hydraulics Cuttings transport Hole cleaning Cuttings bed remover

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient Monolithic Perovskite/Silicon Tandem Photovoltaics

引用

Energy & Environmental Materials 2024年第3期7卷 268-281页

作者： Yong Wang Yu Wang Feng gao Deren Yang State Key Laboratory of Silicon Materials and School of Materials Science and Engineering Zhejiang UniversityHangzhou 310027China ZJU-Hangzhou Global Scientific and Technological Innovation Center Zhejiang UniversityHangzhou 310014China Department of Physics Chemistry and Biology(IFM)Linköping UniversityLinköping 58183Sweden

Tunable bandgaps make halide perovskites promising candidates for developing tandem solar cells(TSCs),a strategy to break the radiative limit of 33.7%for single-junction solar *** perovskites with market-dominant crystalline silicon(c-Si)is particularly attractive;simple estimates based on the bandgap matching indicate that the efficiency limit in such tandem device is as high as 46%.However,state-of-the-art perovskite/c-Si TSCs only achieve an efficiency of~32.5%,implying significant challenges and also rich *** this review,we start with the operating mechanism and efficiency limit of TSCs,followed by systematical discussions on wide-bandgap perovskite front cells,interface selective contacts,and electrical interconnection layer,as well as photon management for highly efficient perovskite/c-Si *** highlight the challenges in this field and provide our understanding of future research directions toward highly efficient and stable large-scale wide-bandgap perovskite front cells for the commercialization of perovskite/c-Si TSCs.

关键词： 2-terminal electrical interconnection perovskite/silicon tandem photovoltaics photon management wide-bandgap perovskites

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Strain-promoted S-arylation and alkenylation of sulfinamides using arynes and cyclic alkynes

引用

Science China Chemistry 2024年第3期67卷 928-935页

作者： Xi Zou Boming Shen gao-lin Li Qian Liang Yanhua Ouyang Binghe Yang Peiyuan Yu Bing gao State Key Laboratory of Chemo/Bio-Sensing and Chemometrics College of Chemistry and Chemical EngineeringInstitute of Chemical Biology and NanomedicineHunan UniversityChangsha 410082China Department of Chemistry and Shenzhen Grubbs Institute Guangdong Provincial Key Laboratory of CatalysisSouthern University of Science and TechnologyShenzhen 518055China

The conversion of commercially available chiral sulfinamides into pharmaceutically useful chiral sulfoximines via direct SIVfunctionalization is synthetically attractive but challenging due to the competitive reaction of N-functionalization. Herein, we disclose a novel strain-release strategy to access stereospecific and chemoselective SIV-arylation and alkenylation of sulfinamides using arynes and strained cyclic alkynes. This method tolerates an unprecedented chemical diversity of functional groups attached to the nitrogen center(N-R). The origin of the high SIV-selectivity is elucidated by density functional theory calculations, suggesting a stepwise mechanism for the aryne substrates and a concerted mechanism for the cyclic alkynes.

关键词： arylation alkenylation sulfoximines sulfinamides arynes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Closed-Form Solution for a Circular Nanohole with Surface Effects Under Uniform Heat Flux

引用

Acta Mechanica Solida Sinica 2024年第1期37卷 43-52页

作者： Jieyao Tang Jieyan Zhao Haibing Yang Cunfa gao State Key Laboratory of Mechanics and Control for Aerospace Structures Nanjing University of Aeronautics and AstronauticsNanjing 210016China School of Civil Engineering and Transportation South China University of TechnologyGuangzhou 510641China College of Mechanics and Materials Hohai UniversityNanjing 211100China

This paper investigates the steady-state thermoelastic problem of a circular nanohole embedded in an infinitely large elastic plane subjected to a uniform far-field heat flux.A lowly conductive surface model is used to account for the effects of surface phonon scattering,while the complete Gurtin–Murdoch model is utilized to characterize the effects of surface tension and surface *** closed-form solution to the temperature and stress field surrounding the hole is derived in the context of complex variable *** numerical examples are presented to analyze the influence of surface effects on thermal stress *** is shown that surface effects induce notable increases in normal and shear stresses around the ***,all three stress components(hoop,normal,and shear)in the vicinity of the hole exhibit substantial augmentation with increasing surface tension and surface *** particular,it is found that the presence of surface effects amplifies the variation in stress gradients and intensifies stress concentration around the hole.

关键词： Circular nanohole Surface effect Thermal stress Heat flux

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stimulating Start-up Investment Through Government-Sponsored Venture Capital:Theory and Chinese Evidence

引用

Journal of Systems Science & Complexity 2024年第5期37卷 2021-2053页

作者： NI Xuanming ZHENG Tiantian gao Feng ZHAO Huimin School of Software and Microelectronics Peking UniversityBeijing 100871China School of Economics and Management Tsinghua UniversityBeijing 100084China School of Business Sun Yat-sen UniversityGuangzhou 510275China

Government-sponsored venture capital(GVC)has been used to support financially constrained start-ups as an important policy tool in ***,to motivate the social capital to invest in start-ups,GVC provides subsidies for them to bridge the funding gap in the early-stage venture capital ***,the effect and mechanism of GVC affecting social capital investment have not been clearly *** this paper,the authors not only develop a game model to analyze this issue in theory,but conduct an empirical study by analyzing the 14741 records matched by propensity score matching(PSM)of Chinese venture capital market data from 2011 to *** proposed findings are as the ***,the subsidies offered by GVC will simultaneously increase the returns and risks of investments in start-ups of social capital with more volatile incentive effect of *** incentive effect of GVC is only effective when the returns resulting from the subsidies outweigh the risks they *** the context of the Chinese venture capital market,the incentive effect of GVC is ***,the incentive effect of GVC is more pronounced in high-tech industries,which can be attributed to the signaling effect facilitated by *** this context,the subsidy mainly helps social capital to bear the costs associated with screening potential ***,the incentive effect of GVC is more significant in underdeveloped venture capital markets,which can be explained by the“virtuous cycle”effect,in which GVC plays a pioneering role in establishing a more robust early-stage market trading *** examining these three points,this study contributes to a better understanding of how GVC can effectively guide social capital investment,especially in the Chinese landscape.

关键词： Government-sponsored venture capital fund incentive effect social capital subsidy venture capital

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Distortion-aware beamforming design for multi-beam satellite communications with nonlinear power amplifiers

引用

Science China(Information Sciences) 2024年第6期67卷 359-369页

作者： Xiang XIAO Li YOU Kezhi WANG Xiqi gao National Mobile Communications Research Laboratory Southeast University Purple Mountain Laboratories Department of Computer Science Brunel University London

Hardware components can cause different impairments, including power amplifier(PA) nonlinearities, which inevitably impact the system performance of satellite communications(SATCOM). In this work, we consider a multi-beam SATCOM downlink system and investigate the distortion-aware beamforming scheme with the characteristics of PA non-linearities. Notably, we aim to maximize the resource efficiency(RE), defined as the weighted sum of energy efficiency(EE) with spectral efficiency(SE), to obtain a flexible EE-SE tradeoff while accounting for the characteristics of PA distortion and the total power *** that the optimization objective is a sum of ratios and the high non-convexity involved in constraints,we propose an efficient approach that exploits the quadratic transformation, the Lagrange multiplier method,and the gradient ascent approach to handle this issue. Simulation results demonstrate the effectiveness of the distortion-aware beamforming approach in achieving the EE-SE tradeoff and exhibit a substantial RE performance gain over the conventional approach with ideal linear PAs assumed at the satellite transmitters.

关键词： multi-beam satellite communications nonlinear power amplifier energy and spectral efficiency tradeoff resource efficiency robust beamforming

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of oxide inclusions on MnS precipitates and tensile mechanical property of high-strength low-alloy steel

引用

Journal of Iron and Steel Research International 2024年第5期31卷 1210-1220页

作者： Xiao-yong gao Hong Wei Li-feng Zhang School of Mechanical Engineering Yanshan UniversityQinhuangdao066004HebeiChina School of Materials Science and Engineering Yanshan UniversityQinhuangdao066004HebeiChina School of Mechanical and Materials Engineering North China University of TechnologyBeijing100144China

The key role of oxide inclusions on the microstructure and mechanical property of a high-strength low-alloy steel was *** field emission scanning electron microscope equipped with energy-dispersive spectrometry was used to characterize MnS *** inclusions play an important role in the shape control of MnS *** oxides fovored to decrease the size and the aspect ratio of MnS *** less oxide inclusions in the steel,approximately over 16.7%MnS precipitates were with aspect ratio a>5 and pure MnS precipitates accounted for 75.9%in ***,with more oxide inclusions in the steel,only 7.4%MnS precipitates were with a>5 and pure MnS precipitates accounted for 60.1%in *** of MnS by oxide inclusions improved the strength and inhibited the *** oxide inclusions in the steel increased the yield strength and tensile strength of the steel in both longitudinal and transverse directions,and lowered the anisotropy of the mechanical property.

关键词： High-strength low-alloy steel MnS Oxide inclusion Mechanical property Anisotropy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：