检索结果-南通市图书馆

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

Water Science and Engineering 2024年第2期17卷 177-186页

作者： Er-feng Zhao Xin li Chong-shi Gu The National Key Laboratory of Water Disaster Prevention Hohai UniversityNanjing 210098China NationalEngineering Research Centerof Water Resources Eficient Utilization and Engineering Safety Hohai UniversityNanjing 20098China

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in *** control is essential to long-term operation of these *** study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in ***,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect *** findings revealed the governing mechanism of main ***,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch *** model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation ***,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam ***,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably *** of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan *** findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

关键词： Ultrahigh arch dam Structural performance Deformation behavior Diagnosis criterion Panel data model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Self assembled electron blocking and lithiophilic interface towards dendrite-free solid-state lithium battery

引用

Chinese Chemical Letters 2024年第4期35卷 220-225页

作者： Caixia li Yi Qiu Yufeng Zhao Wuliang feng Institute for Sustainable Energy&College of Sciences Shanghai UniversityShanghai 200444China Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) Nankai UniversityTianjin 300071China

The poor interfacial contact is one of the biggest challenges that solid-state lithium batteries suffer *** the solid-state electrolyte surface energy by transforming the interface from lithiophobic to lithiophilic is effective to promote the interfacial contact, but electronic conductive interphases usually increase the risk of electron attack, thus leading to uncontrollable li dendrite growth. Herein, we propose a self-assembled thermodynamic stable li I interphase to simultaneously improve the interfacial contact between the garnet electrolyte li_7La_(3)Zr_(2)O_(12)(LLZO) and li anode, and prohibit the electron attack. The direct contact between LLZO and li and the high temperature li melting process was ascribed to Zr4+reduction, which facilitated li dendrite formation and propagation. With the modification of the high lithiophilic I_(2) thin film, the area specific interfacial resistance of LLZO/li was reduced from 1525 Ω/cm^(2) to 57 Ω/cm^(2). More importantly, LLZO was protected from being reduced due to the outstanding electronic insulativity of the li I interphase, which leaded to a high critical current density of 1.2/7.0 m A/cm^(2) in the time/capacity-constant modes, respectively.

关键词： li_7La_(3)Zr_(2)O_(12) liI interphase Interfacial contact li dendrite Thermodynamic stable

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fully fluorinated hybrid zeolite imidazole/Prussian blue analogs with combined advantages for efficient oxygen evolution reaction

引用

Chinese Chemical Letters 2024年第6期35卷 222-228页

作者： Jiayu Xu Meng li Baoxia Dong ligang feng School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhou 225002China

Hybrid metal-organic framework(MOF)derivatives play a significant role in the novel catalyst development in energy conversion ***,we demonstrated the low-temperature fully fluorinated zeolitic imidazole framework(ZIF)coupled with a three-dimensional open framework Prussian blue analog(PBA)with combined advantages for electrocatalytic oxygen evolution reaction(OER)in water splitting *** spectroscopic analysis and the electrochemical studies revealed the combined advantages of efficient electronic effect and active site *** of good conductivity improvement by Ndoped carbon derived from ZIF and the high electrochemical surface area and active site exposure from PBA derivatives,good catalytic performance was obtained on the optimal catalyst of Co Ni ZIF/Co Fe-PBAF-300,which required a low overpotential of 250 m V to reach 10 m A/cm^(2)loaded on the glassy carbon electrode,with Tafel slope of 47.4 m V/dec,and very high dynamic and steady *** addition,the multi-component with the mixed structure from highly polar metal fluorides promoted the easy formation of the active phase as revealed by the post-sample *** current results showed a novel composite catalyst materials development from the hybrid MOF derivatives,which would be promising in the electrolysis of water oxidation reactions and energy-relevant catalysis reactions.

关键词： Metal-organic framework Zeolitic imidazole framework Prussian blue analog Fluoridation Multi-component Oxygen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The age of vanadium-based nanozymes: Synthesis, catalytic mechanisms, regulation and biomedical applications

引用

Chinese Chemical Letters 2024年第4期35卷 52-60页

作者： Shuaiwen li Zihui Chen feng Yang Wanqing Yue Department of Chemistry Key Laboratory of Biomedical Functional MaterialsSchool of ScienceChina Pharmaceutical UniversityNanjing 211198China Key Laboratory of Drug Quality Control and Pharmacovigilance(China Pharmaceutical University) Ministry of EducationNanjing 211198China

Nanomaterials with enzyme-mimic(nanozyme) activity have garnered considerable attention as a potential alternative to natural enzymes, thanks to their low preparation cost, high activity, ease of preservation, and unique physicochemical properties. Vanadium(V) is a transition metal that integrates the benefits of valence-richness, low cost, and non-toxicity, making it a desirable candidate for developing a range of emerging nanozymes. In this review, we provide the first systematic summary of recent research progress on V-based nanozymes. First, we summarize the preparation of V-based nanozymes using both top-down and bottom-up synthesis methods. Next, we review the mechanism of V-based nanozymes that mimic the activity of various enzymes. We then discuss methods for regulating V-based nanozyme activity, including morphology, size, valence engineering, defect engineering, external triggering, and surface engineering. Afterward, we outline various biomedical applications, including therapeutic, anti-inflammatory, antibacterial, and biosensing. Finally, we prospect the challenges and countermeasures for V-based nanozymes based on their development. By summarizing recent research progress on V-based nanozymes, we hope to provide useful insights for researchers to further explore their potential applications and overcome their existing challenges.

关键词： Vanadium Nanozymes Catalytic mechanisms Biomedical applications Regulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of microalloying on wettability and interface characteristics of Zr-based bulk metallic glasses with W substrate

引用

China Foundry 2024年第4期21卷 352-359页

作者： Zhen Zhang lin-na feng Jin-he Wang Zheng-kun li Hua-meng Fu Hong li Zheng-wang Zhu Hai-feng Zhang School of Materials Science and Engineering Shenyang University of TechnologyShenyang 110870China Shi-changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China School of Metallurgy Northeastern UniversityShenyang 110004China

The infiltration casting method is widely employed for the preparation of ex-situ composite ***,the production of composite materials using this method must necessitates a comprehensive understanding of the wettability and interface characteristics between the reinforcing phase and the bulk metallic glasses(BMGs).This work optimized the composition of Zr-based BMGs through microalloying methods,resulting in a new set of Zr-based BMGs with excellent glass-forming *** experiments between the Zr-based BMGs melts and W substrates were conducted using the traditional sessile drop method,and the interfaces were characterized utilizing a scanning electron microscope(SEM)equipped with energy dispersive X-ray spectroscopy(EDS).The work demonstrates that the microalloying method substantially enhances the wettability of the Zr-based BMGs ***,the incorporation of Nb element impedes the formation of W-Zr phases,but the introduction of Nb element does not alter the extent of interdiffusion between the constituent elements of the amorphous matrix and W element,indicating that the influence of Nb element on the diffusion of individual elements is minute.

关键词： Zr-based BMGs infiltration casting method wettability interface characteristics W-Zr phases

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

light weight design and integrated method for manufacturing hydraulic wheel-legged robots

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第9期25卷 701-715页

作者： Xu li Haoyang YU Huaizhi ZONG Haibo feng Yili FU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Fluid Power and Mechatronic Systems Zhejiang UniversityHangzhou 310058China

Design and manufacturing play pivotal roles in hydraulic-driven robotic ***,previous studies have emphasized mainly results and performance,often overlooking the specifics of the design and manufacturing *** paper introduces a novel approach known as light weight design and integrated manufacturing(LD&IM)for hydraulic wheel-legged *** LD&IM method leverages topology optimization and generative design techniques to achieve a substantial 45%weight reduction,enhancing the robot’s dynamic motion *** innovative design method not only streamlines the design process but also upholds the crucial attributes of light weight construction and high strength essential for hydraulic wheel-legged ***,the integrated manufacturing method,incorporating selective laser melting(SLM)and high-precision subtractive manufacturing(SM)processes,expedites the fabrication of high-quality *** the LD&IM approach,a hydraulic-driven single wheel-legged robot,denoted as WLR-IV,has been successfully *** robot boasts low mass and inertia,high strength,and a simplified component *** assess its dynamic jumping capabilities,the control loop integrates a linear quadratic regulator(LQR)and zero dynamic-based controller,while trajectory planning uses the spring-loaded inverted pendulum(SliP)*** jumping results confirm the WLR-IV single-legged robot’s exceptional dynamic performance,validating both the effectiveness of the LD&IM method and the rationale behind the control strategy.

关键词： Wheel-legged robot Hydraulic driven Topology optimization Wheel-legged robot Hydraulic driven Topology optimization Additive manufacturing(AM) Jump control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pre-reduction of WO_(3)-Co_(3)O_(4)by H_(2)-C_(2)H_4 in a fluidized bed

引用

Chinese Journal of Chemical Engineering 2024年第2期66卷 273-284页

作者： Huijun Shang Hengli li Weijun li feng Pan Zhan Du State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of Sciences(CAS)Beijing 100190China College of Chemical Engineering Nanjing Technology UniversityNanjing 211816China School of Chemistry and Chemical Engineering Shihezi UniversityShihezi 832003China College of Chemical Engineering University of Chinese Academy of SciencesBeijing 100049China Chinalco Environmental Protection and Energy Conservation Group Co. Ltd.Xiong’an 071700China

In order to avoid the formation ofηphase(W_(6)Co_(6)C or W_(3)Co_(3)C)that adversely affects the sintering process and its products in the preparation process of ultra-fine WC-Co powder,a technical route of prereduction of WO_(3)-Co_(3)O_(4)to WO_(2)-Co and then deep reduction carbonization to WC-Co powder has been *** study mainly investigates the influence of gas partial pressure on the pre-reduction process of WO_(3)-Co_(3)O_(4)under a mixed atmosphere of H_(2)-C_(2)H_(4)-Ar at 600℃and establishes the kinetic equations of pre-reduction and carbon *** results indicate that increasing the partial pressure of hydrogen is conducive to the rapid and complete conversion of WO_(3) to WO_(2).High carbon content can be generated by the deposition of C_(2)H_(4),and it hinders the diffusion of the reducing gas;WO_(3)still cannot be completely reduced to WO_(2)as the partial pressure of C_(2)H_(4) increases to 60%.For the carbon evolution of C_(2)H_(4),the carbon amount is positively related to the H_(2)partial pressure,but it shows the highest amount and evolution rate when the ethylene partial pressure is 20%.Based on the reduction rate curves of WO_(3) and carbon evolution rate curves of C_(2)H_(4),the rate equations of pre-reduction and carbon evolution of WO_(3)-Co_(3)O_(4)system at 600℃are *** pre-reduction reaction belongs to the first-order reaction,and its equation is expressed as follows:r=-(dw_(WO_(3)))/dt=(9±0.15)×10^(-2)×P_(H_(2))^(0.44)P_(C_(2)H_(4))&(0.57)The carbon deposition rate equation of C_(2)H_(4) can be expressed as follows:r=-(dc_C)/dt=r_f-r_b≌7.35×10^(-2)×P_(C_(2)H_(4))^(0.31)

关键词： Fluidization WO_(3)-Co_(3)O_(4) Reduction Carbon deposition Rate equation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第4期25卷 311-323页

作者： Yanqin li Daohui XIANG Guofu GAO feng JIAO Bo ZHAO School of Mechanical and Power Engineering Henan Polytechnic UniversityJiaozuo 454000China

Ultrasonic vibration grinding differs from traditional grinding in terms of its material removal *** randomness of grain-workpiece interaction in ultrasonic vibration grinding can produce variable chips and impact the surface roughness of ***,previous studies used iterative method to calculate the unformed chip thickness(UCT),which has low computational *** this study,a symbolic difference method is proposed to calculate the *** UCT distributions are obtained to describe the stochastic interaction characteristics of ultrasonic grinding ***,the UCT distribution characteristics under different machining parameters are ***,a surface roughness prediction model is established based on the UCT ***,the correctness of the model is verified by *** study provides a quick and accurate method for predicting surface roughness in longitudinal ultrasonic vibration grinding.

关键词： Ultrasonic vibration grinding Undeformed chip thickness(UCT) Distribution characteristics Surface roughness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Polyethylenimine-modified graphene quantum dots promote endothelial cell proliferation

引用

Regenerative Biomaterials 2024年第2期3卷 137-146页

作者： Qirong Xu Chen li Xiangyan Meng Xinghong Duo Yakai feng School of Chemistry and Chemical Engineering Qinghai University for NationalitiesXining 810007PR China Key Laboratory of National Ethnic Affairs Commission of Resource Chemistry and Ecological Environment Protection on Qinghai-Tibet Plateau Xining 810007PR China institute of Disaster and Emergency Medicine Tianjin UniversityTianjin 300072PR China School of Chemical Engineering and Technology Tianjin UniversityTianjin 300350PR China Key Laboratory of Systems Bioengineering(Ministry of Education) Tianjin UniversityTianjin 300072PR China

Endothelial cell proliferation plays an important role in angiogenesis and treatment of related *** aim of this study was to evaluate the effect of polyethylenimine(PEI)-modified graphene quantum dots(GQDs)gene vectors on endothelial cell *** GQDs-cationic polymer gene vectors were synthesized by amidation reaction,and used to deliver pzNF580 gene to Human umbilical vein endothelial cells(HUVECs)for promoting their *** chemical modification of GQDs can ad-just gene vectors'surface properties and charge distribution,thereby enhancing their interaction with gene molecules,which could effectively compress the pZNF580 *** CCK-8 assay showed that the cell viability was higher than 80%at higher vector concentration(40μg/mL),demonstrating that the GQDs-cationic polymer gene vectors and their gene complex nanoparticles(NPs)having low *** results of the live/dead cell double staining assay were consistent with those of the CCK-8 assay,in which the cell viability of the A-GQDs/pZNF580(94.38±6.39%),C-GQDs-PEI-polylactic acid-co-polyacetic acid(PLGA)/pZNF580(98.65±6.60%)and N-GQDs-PEI-PLGA/pZNF580(90.08±1.60%)groups was significantly higher than that of the lipofectamine 2000/pzNF580(71.98±3.53%)positive treatment *** results of transfection and western blot experiments showed that the vector significantly enhanced the delivery of plasmid to HUVECs and increased the expression of pZNF580 in *** addition,the gene NPs better promote endothelial cell migration and *** cell migration rate and proliferation ability of C-GQDs-PEI-PLGA/pZNF580 and N-GQDs-PEI-PLGA/pZNF580 treatment groupS were higher than those of lipofectamine 2000/pDNA treatment *** GQDs possess the potential to serve as efficient gene *** tightly bind gene molecules through charge and other non-covalent interactions,significantly improving the effciency of gene delivery and ensuring the smooth release of genes with

关键词： graphene quantum dots polyethylenimine ZNF580 gene endothelial cell proliferation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Three-dimensional stress variation characteristics in deep hard rock of CJPL-Ⅱ project based on in-situ monitoring

引用

International Journal of Mining Science and Technology 2024年第2期34卷 179-195页

作者： Minzong Zheng Shaojun li Zejie feng Huaisheng Xu Yaxun Xiao State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China University of Chinese Academy of Sciences Beijing 100049China

In deep hard rock excavation, stress plays a pivotal role in inducing stress-controlled failure. While the impact of excavation-induced stress disturbance on rock failure and tunnel stability has undergone comprehensive examination through laboratory tests and numerical simulations, its validation through insitu stress tests remains unexplored. This study analyzes the three-dimensional stress changes in the surrounding rock at various depths, monitored during the excavation of B2 Lab in China Jinping Underground Laboratory Phase Ⅱ(CJPL-Ⅱ). The investigation delves into the three-dimensional stress variation characteristics in deep hard rock, encompassing stress components and principal stress. The results indicate changes in both the magnitude and direction of the principal stress during tunnel excavation. To quantitatively describe the degree of stress disturbance, a series of stress evaluation indexes are established based on the distances between stress tensors, including the stress disturbance index(SDI), the principal stress magnitude disturbance index(SDIm), and the principal stress direction disturbance index(SDId). The SDI indicates the greatest stress disturbance in the surrounding rock is 4.5 m from the tunnel wall in B2 Lab. SDIm shows that the principal stress magnitude disturbance peaks at2.5 m from the tunnel wall. SDId reveals that the largest change in principal stress direction does not necessarily occur near the tunnel wall but at a specific depth from it. The established relationship between SDI and the depth of the excavation damaged zone(EDZ) can serve as a criterion for determining the depth of the EDZ in deep hard rock engineering. Additionally, it provides a reference for future construction and support considerations.

关键词： Disturbance stress Tensor distance Stress disturbance index Principal stress direction Underground research laboratory

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：