检索结果-南通市图书馆

Why Sustainable Porous Carbon Should be further Explored as Radar-Absorbing Material? A Comparative Study with Different Nanostructured Carbons

引用

Journal of Renewable Materials 2024年第10期12卷 1639-1659页

作者： Alan f.N.Boss Manuella g.C.Munhoz gisele Amaral-Labat Rodrigo g.A.Lima Leonardo I.Medeiros Nila C.f.L.Medeiros Beatriz C.S.fonseca flavia L.Braghiroli guilherme f.B.Lenz e Silva Department of Metallurgical and Materials Engineering University of de São PauloAvenida Mello MoraesCidade UniversitáriaSão PauloSP 05508-030Brazil Coordination of Applied Research and Technological Development National Institute for Space ResearchAvenida dos AstronautasJardim da GranjaSão Josédos CamposSP 12227-010Brazil Department of Exact and Technological Sciences Santa Cruz State UniversityRodovia Jorge Amadokm16IlhéusBA 45662900Brazil Institut de recherche sur les forêts Universitédu Québec en Abitibi-TémiscamingueRouyn-Noranda445 Bd de l’UniversitéRouyn-NorandaQC J9X 5E4Canada

Radar Absorbing Materials(RAM)are a class of composites that can attenuate incident electromagnetic waves to avoid radar *** carbon allotropes that have the potential to be used as RAM are either carbon nano-tubes(CNTs),graphene,carbon black(CB)and ultimately,sustainable porous carbon(SPC).Here,black wattle bark waste(following tannin extraction)was used as a sustainable source to produce SPC made from biomass *** was characterized and used as aﬁller for a silicone rubber matrix to produce aﬂexible *** elec-tromagnetic performance of this composite was compared with composites made with commercial CB and CNT through reﬂection loss(RL),where-10 dB is equivalent to 90%of *** composites were evaluated in single-layer,double-layer,and as radar absorbing structures(RAS)with the aim of improving their effective absorption bandwidth(EAB)performances and a reduction in *** CNT composite presented a RL of-26.85 dB at 10.89 gHz and an EAB of 2.6 gHz with a 1.9 mm thickness,while the double-layer structures using CNT and SPC provided a RL of-19.74 dB at 10.75 gHz and an EAB of 2.51 ***,the double-layer structures are~42%cheaper than the composite using only CNT since less material is ***,the largest EAB was achieved with a RAS using SPC,reaching~2.8 gHz and a RL of-49.09 dB at 10.4 ***,SPC made of black wattle bark waste can be a competitive,alternative material for use as RAM and RAS since it is cheaper,sustainable,and suitable for daily life uses such as absorbers for anechoic chambers,sensors,and elec-tromagnetic interference shields for electronics,wallets,vehicles,and others.

关键词： Microwave absorption material tannin waste dielectric constant carbon composite reﬂectivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tracking the Ti^(4+)substitution in phlogopite by spectroscopic imaging:A tool for unravelling the growth of micas at HP-HT conditions

引用

geoscience frontiers 2024年第3期15卷 1-13页

作者： g.Della Ventura N.El Moutaouakkil B.Boukili S.Bernardini A.Sodo L.Pronti M.Cestelli-guidi f.Holtz f.Lucci Dipartimento di Scienze UniversitàRoma TreRomaItaly INfN-LNf via Fermi 200040 FrascatiRomaItaly INgV Via di Vigna Murata 60500143 RomaItaly Laboratory of géosciences Water and Environment.Department of Earth Sciences.Faculty of SciencesUniversity Mohammed VRabatMorocco Leibnitz Universität Hannover Institute of MineralogyCallinstr 330167 HannoverGermany Dipartimento di Scienze della Terra e geoambientali Universitàdi Bari“Aldo Moro”BariItaly

Phlogopite solid-solutions have a wide pressure-temperature(P-T)stability field and are ubiquitous in a wide variety of geological settings,from deep lithosphere magmatic environments to upper crust metamorphic *** composition represents therefore a valuable physical-chemical archive and may provide important information regarding its crystallization and the petrogenesis of the *** this paper we examine the phlogopite phenocrysts from the well-known fort Regent mica-bearing lamprophyre minette from ***(Island of Jersey,UK).Phlogopite phenocrystals from lamprophyres generally show normal-step and continuous compositional zoning,however those from the fort Regent minette show a peculiar texture characterized by dark brown high-Ti(average TiO_(2)≈8.5 wt.%)cores enveloped by euhedral low-to mid-amplitude zonation due to oscillatory contents in Ti,fe and ***-barometry modelling based on biotite-only composition yields relatively high P-T estimates(T≈970±54℃at P≈0.73±0.13 gPa)for cores whereas lower values(T≈790±54℃at P≈0.29±0.13 gPa)are obtained for the outer *** temperatures(T≈1075±54℃)but extremely high and anomalous pressure values(P≈1.82±0.13 gPa)are obtained for the yellowish inner *** combination of electron micro probe(EMP)analysis and single-crystal infra-red(fTIR)imaging in the OH-stretching region shows that the exceptional and oscillatory Ti contents are due to the Ti-vacancy substitution,typical of crystallization and growth processes of HP/HT *** imaging provides additional insight for this process,confirming the dominant dioctahedral nature for the Ti-fe-rich cores and outer *** of thermobaric estimates obtained from the phlogopite compositiononly model,based on the fine-scale compositional evolution,shows that pressure-temperature values from low-Ti high-Mg domains should be carefully evaluated because the substitution mechanisms during the dark mica growth are not univocal

关键词： Ti-phlogopite Jersey minette(UK) Ti-substitution fTIR imaging Raman imaging Thermobarometric modelling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Control and vibration analyses of a sandwich doubly curved micro-composite shell with honeycomb,truss,and corrugated cores based on the fourth-order shear deformation theory

引用

Applied Mathematics and Mechanics(English Edition) 2024年第10期45卷 1773-1790页

作者： f.SHIRDELAN M.MOHAMMADIMEHR f.BARgOZINI Department of Solid Mechanics Faculty of Mechanical EngineeringUniversity of KashanKashan 87317-53153Iran

Curved shells are increasingly utilized in applied engineering due to their shared characteristics with other sandwich structures,flexibility,and attractive ***,the inability of controlling and regulating vibrations and destroying them afterward is a challenge to *** this paper,the curve shell equations and a linear quadratic regulator are adopted for the state feedback design to manage the structure vibrations in state space forms.A five-layer sandwich doubly curved micro-composite shell,comprising two piezoelectric layers for the sensor and actuator,is modeled by the fourth-order shear deformation *** core(honeycomb,truss,and corrugated)is analyzed for the bearing of transverse shear *** results show that the honeycomb core has a greater effect on the *** the parameters related to the core and the weight percentage of graphene increase,the frequency *** uniform distribution of graphene platelets results in the lowest natural frequency while the natural frequency ***,without taking into account the piezoelectric layers,the third-order shear deformation theory(TSDT)and fourth-order shear deformation theory(fOSDT)align ***,when the piezoelectric layers are incorporated,these two theories diverge significantly,with the frequencies in the fOSDT being lower than those in the TSDT.

关键词： vibration and control doubly curved shell micro-composite honeycomb truss corrugate core

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Phase composition,conductivity,and sensor properties of cerium-doped indium oxide

引用

Nano Materials Science 2024年第2期6卷 193-200页

作者： M.I.Ikim g.N.gerasimov V.f.gromov O.J.Ilegbusi L.I.Trakhtenberg N.N.Semenov federal Research Center for Chemical Physics of RAS MoscowRussia University of Central florida OrlandoFLUSA Moscow Institute of Physics and Technology(State University) DolgoprudnyMoscow RegionRussia Lomonosov Moscow State University MoscowRussia

The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these *** the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).

关键词： Cerium oxide Indium oxide Nanocomposite Hydrothermal method Cubic phase Rhombohedral phase Sensor response Conductivity Hydrogen Response/recovery time

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cam Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Towards efficient strain engineering of 2D materials:A four-points bending approach for compressive strain

引用

Nano Research 2024年第6期17卷 5317-5325页

作者： Hao Li félix Carrascoso Ana Borrás gloria P.Moreno francisco J.Aparicio Ángel Barranco Andrés Castellanos gómez Campus de Cantoblanco Instituto de Ciencia de Materiales de MadridC.Sor Juana Inés de la Cruz328049 MadridSpain Nanotechnology on Surfaces and Plasma Lab Instituto de Ciencia de Materiales de Sevilla(CSIC-Universidad de Sevilla).C/Americo Vespucio 49E-41092 SevilleSpain Departamento de física Aplicada I Escuela Politécnica SuperiorUniversidad de Sevillac/Virgen deÁfrica 7E-41011 SevilleSpain

Strain engineering,as a powerful strategy to tune the optical and electrical properties of two-dimensional(2D)materials by deforming their crystal lattice,has attracted significant interest in recent years.2D materials can sustain ultra-high strains,even up to 10%,due to the lack of dangling bonds on their surface,making them ideal brittle *** remarkable mechanical resilience,together with a strong strain-tunable band structure,endows 2D materials with a broad optical and electrical response upon ***,strain engineering based on 2D materials is restricted by their nanoscale and strain quantification *** this study,we have modified a homebuilt three-points bending apparatus to transform it into a four-points bending apparatus that allows for the application of both compressive and tensile strains on 2D *** approach allows for the efficient and reproducible construction of a strain system and minimizes the buckling effect caused by the van der Waals interaction by adamantane encapsulation *** results demonstrate the feasibility of introducing compressive strain on 2D materials and the potential for tuning their optical and physical properties through this approach.

关键词： uniaxial compressive strain polymer encapsulation differential reflectance spectroscopy exciton tunability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bolstering integrity in environmental data science and machine learning requires understanding socioecological inequity

引用

frontiers of Environmental Science & Engineering 2024年第5期18卷 171-179页

作者： Joe f.Bozeman III School of Civil and Environmental Engineering Georgia Institute of TechnologyAtlantaGA30332USA School of Public Policy Georgia Institute of TechnologyAtlantaGA30332USA

Socioecological inequity in environmental data science—such as inequities deriving from data-driven approaches and machine learning(ML)—are current issues subject to debate and *** is growing consensus around embedding equity throughout all research and design domains—from inception to administration,while also addressing procedural,distributive,and recognitional ***,practically doing so may seem onerous or daunting to *** current perspective helps to alleviate these types of concerns by providing substantiation for the connection between environmental data science and socioecological inequity,using the Systemic Equity framework,and provides the foundation for a paradigmatic shift toward normalizing the use of equity-centered approaches in environmental data science and ML *** the integrity of environmental data science and ML is just beginning from an equity-centered tool development and rigorous application *** this end,this perspective also provides relevant future directions and challenges by overviewing some meaningful tools and strategies—such as applying the Wells-Du Bois Protocol,employing fairness metrics,and systematically addressing irreproducibility;emerging needs and proposals—such as addressing data-proxy bias and supporting convergence research;and establishes a ten-step path ***,the work that environmental scientists and engineers do ultimately affect the well-being of us all.

关键词： Equity Bias Machine Learning Data Science Justice Systemic Equity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy

引用

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 362-373页

作者： f.Akbari M.golkaram S.Beyrami g.Shirazi K.Mantashloo R.Taghiabadi M.Saghafi Yazdi I.Ansarian Department of Metallurgy and Material Science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCR).According to the results,by increasing the SCR from 2.0 to 59.5℃/s the average size of primary Si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the SCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 MPa,an in-crease in the SCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent research in mechanical properties of geopolymer-based ultrahigh-performance concrete:A review

引用

Defence Technology（防务技术） 2024年第2期32卷 67-88页

作者： g.Murali Division of Research&Innovation Uttaranchal UniversityDehradun 248007India

Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called geopolymer based ultra-highperformance concrete(gUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border *** this context,this article reviews the fresh state and mechanical properties of ***,the ingredients of gUHPC and fresh properties such as setting time and flowability are briefly ***,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous ***,the blast and projectile impact resistance performance was ***,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder *** review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of *** is hypothesized that the brittleness of gUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and *** the need for cement in gUHPC was a key factor in the review,indicating a promising potential for lowering carbon ***,gUHPC research is still in its early stages,so more study is required before its full potential can be utilized.

关键词： Mechanical properties Blast Projectile impact fibre geopolymer Silica fume Alkaline activators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Liver transplantation for colorectal liver metastasis:the exception,not the rule

引用

Hepatobiliary Surgery and Nutrition 2024年第5期13卷 857-860页

作者： Diamantis I.Tsilimigras Anargyros Bakopoulos Timothy M.Pawlik1 Timothy M.Pawlik Department of Surgery Division of Surgical OncologyThe Ohio State UniversityWexner Medical Center and James Comprehensive Cancer CenterColumbusOHUSA Department of Surgery Laiko University HospitalNational and Kapodistrian University of AthensAthensGreece Department of Surgery Attikon University HospitalNational and Kapodistrian University of AthensAthensGreece

Approximately half of individuals diagnosed with colorectal cancer(CRC)will develop colorectal liver metastasis(CRLM)during the course of their disease(1,2).Liver resection is the only potentially curative treatment for patients with CRLM,yet less than 20%of individuals are candidates for resection due to the extent or location of liver disease,underlying liver function and/or presence of extrahepatic metastases(1,2).In addition,the oncologic benefit of liver resection for CRLM is limited by recurrence rates than can be as high as 70%(3).Liver transplantation(LT)for CRLM was initially proposed as an alternative treatment strategy in the early 1990s but was abandoned due to the initial poor outcomes(3,4).The concept of transplantation for CRLM was later revisited in the 2000s by a group in Oslo,Norway that reported promising results in the SECA-I pilot study(5).Since the completion of the SECA-I study,the Norwegian group has also published other promising data from the SECA-II study(6).In addition,other notable outcomes have been reported in the RAPID study(7),as well as another study from specialized centers in North America(8),both of which have revitalized the concept of LT for CRLM.

关键词： Liver transplantation(LT) colorectal cancer(CRC) liver metastasis colorectal liver metastasis(CRLM)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：