检索结果-南通市图书馆

China Ocean Engineering 2024年第2期38卷 233-246页

作者： ding xin-dong WANG Shu-qing LIU Wen-cheng YE Xiao-han College of Engineering Ocean University of ChinaQingdao 266100China Shandong Provincial Key Laboratory of Ocean Engineering Ocean University of ChinaQingdao 266100China Department of Marine Technology Norwegian University of Science and Technology(NTNU)Trondheim NO-7491Norway

The collapse pressure is a key parameter when RTPs are applied in harsh deep-water *** investigate the collapse of RTPs,numerical simulations and hydrostatic pressure tests are *** the numerical simulations,the eigenvalue analysis and Riks analysis are combined,in which the Hashin failure criterion and fracture energy stiffness degradation model are used to simulate the progressive failure of composites,and the“infinite”boundary conditions are applied to eliminate the boundary *** for the hydrostatic pressure tests,RTP specimens were placed in a hydrostatic chamber after filled with *** has been observed that the cross-section of the middle part collapses when it reaches the maximum *** collapse pressure obtained from the numerical simulations agrees well with that in the ***,the applicability of NASA SP-8007 formula on the collapse pressure prediction was also *** has a relatively greater difference because of the ignorance of the progressive failure of *** the parametric study,it is found that RTPs have much higher first-ply-failure pressure when the winding angles are between 50°and 70°.Besides,the effect of debonding and initial ovality,and the contribution of the liner and coating are also discussed.

关键词： reinforced thermoplastic pipes post-buckling behavior progressive failure of composites debonding initial ovality

Design strategies for rechargeable aqueous metal-ion batteries

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第1期67卷 165-190页

作者： Yang Li xin Zhao Yifu Gao Yichen ding Zhichun Si Liubing dong dong Zhou Feiyu Kang Tsinghua Shenzhen International Graduate School Tsinghua UniversityShenzhen 518055China College of Chemistry and Materials Science Jinan UniversityGuangzhou 511443China

Rechargeable aqueous metal-ion batteries(AMBs)have attracted extensive scientific and commercial interest due to their potential for cost-effective,highly safe,and scalable stationary energy ***,their limited output voltage,inadequate energy density,and poor reversibility of ambiguous electrode reactions in aqueous electrolytes strongly limit their practical *** review aims to elucidate the challenges of existing AMBs from the material design to whole device *** summarize the emerging electrochemistry,fundamental properties,and key issues in interfacial behaviors of various classes of prevailing AMBs,including aqueous alkali metal-ion batteries and multivalent-ion batteries,and present an appraisal of recent advances for addressing the performance ***,the progress of zinc-ion batteries is highlighted to provide a ubiquitous guideline for their commercialization in the grid-scale energy ***,we figure out the dominating general challenges for achieving high-performance AMBs,laying out a perspective for future breakthroughs.

关键词： aqueous metal-ion batteries aqueous alkali metal-ion batteries zinc-ion batteries interfacial behavior stationary energy storage

Effect of tungsten carbide particles on microstructure and mechanical properties of Cu alloy composite bit matrix

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第2期31卷 519-530页

作者： ding-qian dong Feng-yuan He xin-hui Chen Hui Li Kai-hua Shi Hui-wen Xiong xin Xiang Li Zhang College of Mechanical Engineering Sichuan University of Science and EngineeringZigong643000SichuanChina State Key Laboratory of Powder Metallurgy Central South UniversityChangsha410083HunanChina Zigong Cemented Carbide Co. Ltd.Zigong643011SichuanChina Material Corrosion and Protection Key Laboratory of Sichuan Province Sichuan University of Science and EngineeringZigong643000SichuanChina

Copper alloy composite bit matrix was prepared by pressureless vacuum infiltration,using at least one of the three kinds of tungsten carbide particles,for example,irregular cast tungsten carbide,monocrystalline tungsten carbide and sintered reduced tungsten carbide *** effects of powder particle morphology,particle size and mass fraction of tungsten carbide on the microstructure and mechanical properties of copper alloy composite were investigated by means of scanning electron microscopy,X-ray diffraction and abrasive wear test in *** results show that tungsten carbide morphology and particle size have obvious effects on the mechanical properties of copper alloy *** tungsten carbide partially dissolved in the copper alloy binding phase,and layers of Cu_(0.3)W_(0.5)Ni_(0.1)Mn_(0.1)C phase with a thickness of around 8–15μm were formed on the edge of the cast tungsten *** 45%irregular crushed fine cast tungsten carbide and 15%monocrystalline cast tungsten carbide were used as the skeleton,satisfactory comprehensive performance of the reinforced copper alloy composite bit matrix was obtained,with the bending strength,impact toughness and hardness reaching 1048 MPa,4.95 J/cm^(2) and 43.6 HRC,*** main wear mechanism was that the tungsten carbide particles firstly protruded from the friction surface after the copper alloy matrix was worn,and then peeled off from the matrix when further wear occurred.

关键词： Polycrystalline diamond compact Pressureless vacuum infiltration Copper alloy composite bit matrix Microstructure characterization Abrasive wear behavior

Effect of hot isostatic pressure on the microstructure and tensile properties of γ'-strengthened superalloy fabricated through induction-assisted directed energy deposition

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1089-1097页

作者： Jianjun Xu Hanlin ding xin Lin Feng Liu Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China

The microstructure characteristics and strengthening mechanism of Inconel738LC(IN-738LC) alloy prepared by using induction-assisted directed energy deposition(IDED) were elucidated through the investigation of samples subjected to IDED under 1050℃ preheating with and without hot isostatic pressing(HIP,1190℃,105 MPa,and 3 h).Results show that the as-deposited sample mainly consisted of epitaxial columnar crystals and inhomogeneously distributed γ’ phases in interdendritic and dendritic core *** HIP,grain morphology changed negligibly,whereas the size of the γ’ phase became increasingly *** further heat treatment(HT,1070℃,2 h + 845℃,24 h),the γ’ phase in the as-deposited and HIPed samples presented a bimodal size distribution,whereas that in the as-deposited sample showed a size that remained *** comparison of tensile properties revealed that the tensile strength and uniform elongation of the HIP + HTed sample increased by 5% and 46%,respectively,due to the synergistic deformation of bimodal γ’phases,especially large cubic γ’ ***,the relationship between phase transformations and plastic deformations in the IDEDed sample was discussed on the basis of generalized stability theory in terms of the trade-off between thermodynamics and kinetics.

关键词： directed energy deposition Ni-based superalloys high-temperature preheating hot isostatic pressing microstructure tensile properties

Left Frobenius Pairs,Cotorsion Pairs and Weak Auslander-Buchweitz Contexts in Triangulated Categories

在线全文

学校读者我要写书评

暂无评论

Algebra Colloquium 2024年第2期31卷 285-308页

作者： xin Ma Tiwei Zhao Zhaoyong Huang Nanqing ding College of Science Henan University of EngineeringZhengzhou 451191China School of Mathematical Sciences Qufu Normal University QufuShandong 273165China Department of Mathematics Nanjing UniversityNanjing 210093China 不详

Let T be a triangulated category with a proper classξof *** introduce the notions of left Frobenius pairs,left(n-)cotorsion pairs and left(weak)Auslander-Buchweitz contexts with respect toξin *** show how to construct left cotorsion pais from left n-cotorsion pairs,and establish a one-to-one correspondence between left Frobenius pairs and left(weak)Auslander-Buchweitz *** applications are given in the Gorenstein homological theory of triangulated categories.

关键词： left Frobenius pairs left n-cotorsion pairs left(weak)Auslander-Buchweitz contexts homological dimensions

Effect of bipolar-plates design on corrosion,mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers:A review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1599-1616页

作者： Jiuhong Zhang Xiejing Luo Yingyu ding Luqi Chang Chaofang dong Key Laboratory for Corrosion and Protection(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China Beijing Advanced Innovation Center for Materials Genome Engineering Beijing 100083China

Attaining a decarbonized and sustainable energy system,which is the core solution to global energy issues,is accessible through the development of hydrogen ***-exchange membrane water electrolyzers(PEMWEs)are promising devices for hydrogen production,given their high efficiency,rapid responsiveness,and *** plates account for a relatively high percentage of the total cost and weight compared with other components of ***,optimization of their design may accelerate the promotion of *** paper reviews the advances in materials and flow-field design for bipolar ***,the working conditions of proton-exchange membrane fuel cells(PEMFCs)and PEMWEs are compared,including reaction direction,operating temperature,pressure,input/output,and ***,the current research status of bipolar-plate substrates and surface coatings is summarized,and some typical channel-rib flow fields and porous flow fields are ***,the effects of materials on mass and heat transfer and the possibility of reducing corrosion by improving the flow field structure are ***,this review discusses the potential directions of the development of bipolar-plate design,including material fabrication,flow-field geometry optimization using threedimensional printing,and surface-coating composition optimization based on computational materials science.

关键词： bipolar-plates flow design mass and heat transfer corrosion water electrolyzers fuel cells

Recent progress on Sn_(3)O_(4)nanomaterials for photocatalytic applications

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 231-244页

作者： xin Yu Congcong Li Jian Zhang Lili Zhao Jinbo Pang Longhua ding Institute for Advanced Interdisciplinary Research(iAIR) School of Chemistry and Chemical EngineeringUniversity of JinanJinan 250022China School of Sino-German Engineering Shanghai Technical Institute of Electronics and InformationShanghai 201411China Division of Systems and Synthetic Biology Department of Life SciencesChalmers University of Technology41296 GöteborgSweden

Tin(IV)oxide(Sn_(3)O_(4))is layered tin and exhibits mixed valence *** has emerged as a highly promising visible-light pho-tocatalyst,attracting considerable *** comprehensive review is aimed at providing a detailed overview of the latest advance-ments in research,applications,advantages,and challenges associated with Sn_(3)O_(4)photocatalytic *** fundamental con-cepts and principles of Sn_(3)O_(4)are ***_(3)O_(4)possesses a unique crystal structure and optoelectronic properties that allow it to ab-sorb visible light efficiently and generate photoexcited charge carriers that drive photocatalytic ***,strategies for the control and improved performance of Sn_(3)O_(4)photocatalytic nanomaterials are *** control,ion doping,and hetero-structure construction are widely employed in the optimization of the photocatalytic performance of Sn_(3)O_(4)*** effective imple-mentation of these strategies improves the photocatalytic activity and stability of Sn_(3)O_(4)***,the review explores the diverse applications of Sn_(3)O_(4)photocatalytic nanomaterials in various fields,such as photocatalytic degradation,photocatalytic hydro-gen production,photocatalytic reduction of carbon dioxide,solar cells,photocatalytic sterilization,and optoelectronic *** discus-sion focuses on the potential of Sn_(3)O_(4)-based nanomaterials in these applications,highlighting their unique attributes and ***,the review provides an outlook on the future development directions in the field and offers guidance for the exploration and de-velopment of novel and efficient Sn_(3)O_(4)-based *** the identification of emerging research areas and potential avenues for improvement,this review aims to stimulate further advancements in Sn_(3)O_(4)-based photocatalysis and facilitate the translation of this promising technology into practical applications.

关键词： photocatalysis Sn_(3)O_(4)nanomaterials building heterostructures antibacterial therapy water splitting

Dynamic motion of quadrupedal robots on challenging terrain:a kinodynamic optimization approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Mechanical Engineering 2024年第3期19卷 23-40页

作者： Qi LI Lei ding xin LUO Engineering Research Center of Hubei Province for Clothing Information Wuhan 430200China School of Computer Science and Artificial Intelligence Wuhan Textile UniversityWuhan 430200China State Key Laboratory of Digital Manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan 430074China

The dynamic motion of quadrupedal robots on challenging terrain generally requires elaborate spatial–temporal kinodynamic motion planning and accurate control at higher refresh rate in comparison with regular ***,conventional quadrupedal robots usually generate relatively coarse planning and employ motion replanning or reactive strategies to handle terrain *** resultant complex and computation-intensive controller may lead to nonoptimal motions or the breaking of locomotion *** this paper,a kinodynamic optimization approach is *** generate long-horizon optimal predictions of the kinematic and dynamic behavior of the quadruped robot on challenging terrain,we formulate motion planning as an optimization problem;jointly treat the foot’s locations,contact forces,and torso motions as decision variables;combine smooth motion and minimal energy consumption as the objective function;and explicitly represent feasible foothold region and friction constraints based on terrain *** track the generated motions accurately and stably,we employ a whole-body controller to compute reference position and velocity commands,which are fed forward to joint controllers of the robot’s *** verify the effectiveness of the developed approach through simulation and on a physical quadruped robot *** show that the quadruped robot can successfully traverse a 30°slope and 43% of nominal leg length high step while maintaining the rhythm of dynamic trot gait.

关键词： quadrupedal robot kinodynamic planning nonlinear optimization challenging terrain whole-body control

Evaluation and Influencing Factors on Particle Agglomeration in RAP

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 60-68页

作者：唐伟李宁 ZHUANG Yuan ZHAN He YU xin WU Wenxiu ding Gongying College of Civil and Transportation Engineering Hohai UniversityNanjing 210098China Jiangsu Expressway Engineering Maintenance Technology Center Nanjing 211106China Jinhua Highway and Transportation Management Center Jinhua 321000China

Asphalt extraction test and scanning electron microscopy(SEM) were used for analysis of agglomerations of reclaimed asphalt pavement(RAP) particles. In order to quantify the agglomeration degree of RAP, the fineness modulus ratio(FMR) and the percentage loss index(PLI) were proposed. In addition, grey correlation analysis was conducted to discuss the relationship between particle agglomerations and RAP size,asphalt content(AC), and surface area. Two indexes indicate that the agglomeration degree increases in general as the RAP size reduces. This can be attributed to that particles are prone to agglomeration in the case of higher AC. Based on the SEM images and the material composition of RAP, the particle agglomeration in RAP can be classified into weak agglomeration and strong agglomeration. Grey correlation analysis shows that AC is the crucial factor affecting the agglomeration degree and RAP variability. In order to produce consistent and stable reclaimed mixtures, disposal measures of RAP are suggested to lower the AC of RAP.

关键词： RAP particle agglomeration grey correlation analysis asphalt content

Synergistic enhancement on mechanical properties and corrosion resistance of biodegradable Mg-Zn-Y alloy via V-microalloying

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 530-545页

作者： Jiaxin Zhang xin ding Ruirun Chen Wenchao Cao Jinshan Zhang Rui Zhao National Key Laboratory for Precision Hot Processing of Metals Harbin Institute of TechnologyNo.92West Dazhi StreetHarbinHeilongjiang 150001China College of Materials Science and Engineering Taiyuan University of TechnologyNo.79West Yingze StreetTaiyuanShanxi 030024China

For the sake of improving the mechanical properties and corrosion resistance of biodegradable Mg alloy synergistically,various content of element V(0,0.05,0.10,0.15,0.20 wt.%)are introduced into an Mg-Zn-Y alloy with long-period stacking ordered(LPSO)structure,and the effects of V on its microstructure,mechanical properties and corrosion resistance are investigated *** results indicate that the grains are effectively refined by V addition,and the primaryα-Mg in Mg-Zn-Y-V0.1 alloy is most significantly refined,with grain size being decreased by 62%.The amount of 18R LPSO structure is increased owing to the V *** growth mode of the second phase(W-phase and 18R LPSO structure)is transformed to divorced growth pattern,which ascribes to the thermodynamic drive force of V to promote the nucleation of LPSO ***,18R LPSO structure presents a continuous *** to grains refinement and modification of second phase,the tensile strength and strain of alloys are both enhanced ***,the ultimate tensile strength and the elongation of V0.1 alloy are 254 MPa and 15.26%,which are 41%and 61%higher than those of V-free alloy,*** to the continuously distributed 18R LPSO structure with refined grains and stable product film,the weight loss and hydrogen evolution corrosion rates of V0.1 alloy are 7.1 and 6.2 mmy^(-1),respectively,which are 42.6%and 45.4%lower than those of V-free alloy.

关键词： Corrosion Mechanical property V-microalloying LPSO SKPFM