检索结果-南通市图书馆

Bio-design and Manufacturing 2024年第1期7卷 43-56页

作者： Yang Li Jibao zheng Changning Sun dichen Li State Key Laboratory for Manufacturing System Engineering School of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710054China National Medical products Administration(NMpA)Key Laboratory for Research and Evaluation of Additive Manufacturing Medical devices Xi’an Jiaotong UniversityXi’an 710054China

Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint *** this study,we created a polyether-ether-ketone(pEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf *** ultrahigh molecular weight polyethylene transfer film is formed on the surface of pEEK due to the mechanical capture of wear debris by the 3d-printed groove morphology,which is significantly impacted by the printing orientation of *** the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady *** transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,***,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

关键词： 3d printing orientation Transfer film Tribological properties polyether-ether-ketone Knee prosthesis

Constructing Lithium-Free Anode/Separator Interface via 3d Carbon Fabric Scaffold for Ultrasafe Lithium Metal Batteries

在线全文

学校读者我要写书评

暂无评论

Research 2024年第3期2023卷 359-368页

作者： dongdong Li Shengchen Yang Zijian zheng Wen-Yong Lai State Key Laboratory of Organic Electronics and Information displays(SKLOEId) Institute of Advanced Materials(IAM)School of Chemistry and Life SciencesNanjing University of Posts and Telecommunications9 Wenyuan RoadNanjing 210023China department of Materials Chemistry Huzhou University1 Xueshi RoadHuzhou 313000China Laboratory for Advanced Interfacial Materials and devices School of Fashion and TextilesDepartment of Applied Biology and Chemical TechnologyResearch Institute for Intelligent Wearable Systems(RI-IWEAR)Research Institute for Smart Energy(RISE)The Hong Kong Polytechnic UniversityHong Kong SAR 999077China

Metallic lithium represents a promising anode candidate to be utilized in future high-energy lithium ***,the undesirable dendrite growth and fragile solid-electrolyte interphase(SEI)pose critical challenge for pursuing further practical *** contrast to traditional approaches of using inert/lithiophilicity coating,here,we demonstrate a reverse strategy of introducing a highly conductive and lithophobic carbon fabric(CF)scaffold on lithium foil to guide a favorable nucleation site of lithium far away from the anode/separator *** CF scaffold with high conductivity can couple with inner electric field for achieving a uniform distribution of the lithium-ion flux,while the lithophobic feature offers the condition to guide the preferred deposition of lithium onto the underlying lithium foil,which greatly reduces the risk of dendrite-induced short ***,the SEI immersed in the CF scaffold is well supported by CF fibers and therefore exhibits extremely high stability during charge–discharge *** a result,the lithium/CF anodes show>2,000-h stable cycling at 0.5 mA cm−*** metal batteries equipped with our lithium/CF anode deliver a high capacity retention of~99.99%per cycle,i.e.,retain~97.3%capacity after 200 *** unique interface-regulation strategy is versatile for various conductive scaffolds(e.g.,ultrathin and ultralight conductive fabrics),exhibiting high superiority for highly safe lithium metal batteries.

关键词： lithium equipped versatile

Scaling laws governing the elastic properties of 3d graphenes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第6期67卷 1748-1756页

作者： LI Ming LU Guo YU Haodong LI MengLei zheng FaWei Centre for Quantum physics Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurement(MOE)School of PhysicsBeijing Institute of TechnologyBeijing100081China Beijing Key Lab of Nanophotonics&Ultrafine Optoelectronic Systems School of PhysicsBeijing Institute of TechnologyBeijing100081China Laboratory of Computational physics Institute of Applied Physics and Computational MathematicsBeijing100088China department of physics Capital Normal UniversityBeijing100048China

In this study,we comprehensively investigated the scaling law for elastic properties of three-dimensional honeycomb-like graphenes(3d graphenes)using hybrid neural network potential-based molecular dynamics simulations and theoretical *** elastic constants were obtained as functions of honeycomb hole size,denoted by the graphene wall length *** five independent elastic constants in the large-L limit are proportional to L^(-1).The associated coefficients are combinations of elastic constants of two-dimensional ***-order terms including L^(-2)and L^(-3)emerge for finite L *** have three origins,the distorted areas close to the joint lines of 3d graphenes,the variation in solid angles between graphene plates,and the bending distortion of graphene ***,the chirality becomes essential with decreasing L because the joint line structures are different between the armchair and zigzag-type 3d *** findings provide insights into the elastic properties of graphene-based superstructures and can be used for further studies on graphene-based materials.

关键词： scaling law neural network elastic properties 3d graphene

MR成像及MR波谱成像对活体肝移植供肝脂肪变性检测及定量分析准确性的Meta分析

在线全文

学校读者我要写书评

暂无评论

国际医学放射学杂志 2017年第2期 207-208页

作者： d.p.zheng Z.Y.Guo p.M.Schroder Z.Y.zheng Y.Lu J.C.Gu 蒋宇吴兰 Organ Transplant Center the First Affiliated HospitalSun Yat-Sen University

摘要目的探讨MRI对活体肝移植供肝脂肪变性检测与定量分析的准确性。材料与方法查找MRI对活体肝移植供肝脂肪变性检测与定量分析研究文献并进行系统综述。应

关键词：活体肝移植 MRI 供肝脂肪变性定量分析 MR Meta

dynamic collapse characteristics of the tunnel face induced by the shutdown of earth pressure balance shields(EpB):A 3d material point method study

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Underground Space 2024年第3期16卷 164-182页

作者： Shuying Wang Tingyu Liu Xiangcou zheng Junsheng Yang Feng Yang School of Civil Engineering Central South UniversityChangsha 410075HunanChina Tunnel and Underground Engineering Research Center of Central South University Changsha 410075HunanChina Hunan provincial Key Laboratory for disaster prevention and Mitigation of Rail Transit Engineering Structures Central South UniversityChangsha 410075HunanChina

The collapse of the tunnel face is a prevalent geological disaster in *** study employs a three-dimensional(3d)material point method(MpM)to simulate the dynamic collapse process and post-failure mechanisms of the tunnel *** specific focus is on the scenario where the auxiliary air pressure balanced shield with a partially filled chamber is shut *** assess the suitability of the 3d MpM,numerical solutions are compared with the results from small-scale experimental ***,a series of large-scale numerical simulations is conducted to explore the dynamic collapse characteristics of the tunnel face induced by the shutdown of the EpB shield under various support air pressures and cutter head *** temporal evolution of the accumulated soil masses in the soil chamber and ground responses under different support air pressures,cutter head types and opening ratios are *** particular,the associated surface subsidence due to the tunnel face collapse is determined and compared with empirical *** results confirm the applicability of the 3d MpM for simulating the large-scale tunnel face collapse scenarios,spanning from small to large deformation analysis.

关键词： Large deformation Material point method partially filled chamber post-failure mechanism Shield tunnel Tunnel face collapse

Numerical analysis of high‑speed railway slab tracks using calibrated and validated 3d time‑domain modelling

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 36-58页

作者： A.F.Esen O.Laghrouche p.K.Woodward d.Medina‑pineda Q.Corbisez J.Y.Shih d.p.Connolly Institute for High‑Speed Rail and System Integration University of LeedsLeeds LS29JTUK Institute for Infrastructure and Environment Heriot-Watt UniversityEdinburgh EH144ASUK Alstom Transport Saint‑OuenFrance Birmingham Centre for Railway Research and Education University of BirminghamBirmingham B152TTUK

Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance *** this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in *** is then compared to the performance of a ballasted ***,slab and ballasted track models are developed to replicate the full-scale testing of track *** the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track *** slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the *** travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical *** train loading methods are discussed,and the most practical approach is retained and ***,correlations are made between the geotechnical parameters of modern high-speed rail and conventional *** is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.

关键词： High-speed railways Slab track New ballastless track Ballasted track Critical speeds Finite element modelling Calibration of numerical models

A modified 3d mean strain energy density criterion for predicting shale mixed-mode Ⅰ/Ⅲ fracture toughness

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第7期16卷 2411-2428页

作者： Kun zheng Chaolin Wang Yu Zhao Jing Bi Haifeng Liu College of Civil Engineering Guizhou UniversityGuiyang550025China State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China

The fracture toughness of rocks is a critical fracturing parameter in geo-energy exploitation playing a significant role in fracture mechanics and hydraulic *** edge-notched disk bending(ENdB)specimens are employed to measure the entire range of mixed-modeⅠ/Ⅲfracture toughness of Longmaxi *** theoretically interpret the fracture mechanisms,this research first introduces the detailed derivations of three established fracture *** distinguishing the volumetric and distortional strain energy densities,an improved three-dimensional mean strain energy density(MSEd)criterion is *** the critical volumetric to distortional MSEd ratio decreases,the transition from tensiondominated fracture to shear-dominated fracture is *** results indicate that both peak load and applied energy increase significantly with the transition from pure mode I(i.e.,tension)to pure modeⅢ(i.e.,torsion or tearing)since mode-Ⅲcracking happens in a twisted manner and mode-Ⅰcracking occurs in a coplanar *** macroscopic fracture signatures are consistent with those of triaxial hydraulic *** average ratio of pure mode-Ⅲfracture toughness to pure mode-Ⅰfracture toughness is 0.68,indicating that the obtained mode-Ⅲfracture resistance for a tensionbased loading system is apparent rather than *** to the three mainstream fracture criteria,the present fracture criterion exhibits greater competitiveness and can successfully evaluate and predict mixed-modeⅠ/Ⅲfracture toughness of distinct materials and loading methods.

关键词： Longmaxi shale Hydraulic fracturing Fracture mechanisms Fracture criteria Mixed-modeⅠ/Ⅲfracture toughness Edge-notched disk bending

Strategy of preparing SmCo based films with high coercivity and remanence ratio achieved by temperature and chemical optimization

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1289-1297,I0004页

作者： Yansong Gong Zhaoguo Qiu Sizhe Liang Xinrui zheng Hongxia Meng Zhigang zheng deyang Chen Shengfu Yuan Weixing Xia dechang Zeng J.p.Liu School of Materials Science and Engineering South China University of TechnologyGuangzhou510640China Zhongshan R&d Center for Materials Surface and Thin Films Technology of the South China University of Technology Gent Materials Surface Technology(Guangdong)Co.Ltd.Zhongshan528437China Institute for Advanced Materials South China Academy of Advanced OptoelectronicsSouth China Normal UniversityGuangzhou510006China Yangjiang Branch Guangdong Laboratory Materials Science and Technology Yangjiang Advanced Alloys LaboratoryYangjiang529500China Laboratory of Rare-Earth Magnetic Functional Materials Ningbo Institute of Material Technology and EngineeringChinese Academy of SciencesNingbo315201China department of physics University of Texas at ArlingtonArlingtonTX76019USA

SmCo based films with excellent intrinsic magnetic properties have promising applications in micro-electro-mechanical system(MEMS).However,due to the complexity of phase composition and uncontrollable crystallization degree of SmCo hard magnetic phase in the film,both the coercivity(Hc)and remanence(Mr)of films are difficult to enhance *** this paper,SmCo based films were deposited with a Cr underlayer and capping layer on single crystal Si substrates via magnetron sputtering *** effects of annealing parameters and Sm/Co atomic ratio on the phase structure and coercivity of films are *** adjusting the Sm/Co atomic ratio from 1:5 to 1:4,Co soft magnetic phase disappears and the single phase SmCo5 is obtained,leading to the increase of coercivity of the films from 30 to 34 *** influence of deposition temperature and Cu doping on magnetic properties of SmCo based films was *** the deposition temperature increases from room temperature to 250℃,the coercivity will further increase from 34 to 51 ***,a severe kink is observed in the demagnetization curves due to the poor exchanged *** analysis of transmission electron microscopy(TEM)confirms that the average size of non-hard magnetic amorphous phase exceeds the effective exchanged coupling length of SmCo5,which contributes to the decoupling and low remanence ***,doping Cu and applying a post-annealing process can significantly improve the crystallization degree of the *** the coercivity and the remanence ratio of the demagnetization curves are greatly *** propose a plausible strategy to prepare the SmCo based films with high coercivity and remanence ratio by temperature and chemical optimization,which can be utilized in high performed MEMS devices.

关键词： Rare earths SmCo based films phase composition Crystallization conditions Coercivity Remanence ratio

Modulation of d-orbital to realize enriched electronic cobalt sites in cobalt sulfide for enhanced hydrogen evolution in electrocatalytic water/seawater splitting

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 511-521页

作者： Jian-peng Sun Yu zheng Zi-Sheng Zhang Xiang-Chao Meng Zi-Zhen Li Key Laboratory of Marine Chemistry Theory and Technology(Ministry of Education) College of Chemistry and Chemical EngineeringOcean University of ChinaQingdao266100China Shanxi Institute of Energy Taiyuan030600China department of Chemical and Biological Engineering Faculty of EngineeringUniversity of OttawaOttawaONK1N6 N5Canada

Herein,a novel single-atomic pt doping and interface-rich CoS/Co(OH)_(2)(pt-CoS/Co(OH)_(2)/C)electrocatalyst has been successfully *** from precise regulation of d-orbital electronic structure modulation on Co site,pt-CoS/Co(OH)_(2)/C exhibited remarkable HER activity and high stability for hydrogen evolution in splitting both water(73 mV@10 mA·cm^(−2)) and seawater(87 mV@10 mA·cm^(−2)).Notably,atomic pt doping was introduced into CoS/Co(OH)_(2),which could produce local unbalanced Coulombic force and significantly increased the number of S vacancies,and then expose abundant Co ***,Co(OH)_(2) in pt-CoS/Co(OH)_(2)/C could act as the adsorption sites for H_(2)O in hydrogen evolution reaction *** functional theory results also proved that atomic pt doping,S vacancies and Co(OH)_(2) coupling could result in the formation of enriched electronic Co sites and optimize d_(z2) orbital electronic structure,and then realize the depth upward shift of d-band center and enhance the adsorption of H*on Co sites.

关键词： Electrocatalysts Hydrogen evolution reaction pt-CoS/Co(OH)_(2) d-band center Electronic structure Water/seawater electrolysis

Advancements in synthetic and electrocatalytic exploitation of guest-host intercalated 2d materials

在线全文

学校读者我要写书评

暂无评论

progress in Natural Science:Materials International 2024年第3期34卷 454-469页

作者： Qian Yang Kun Wang Meiling Zhang Feihong du Jiayang Li Chen zheng Jinyang Li School of Chemistry Southwest Jiaotong University Yibin Institute of Southwest Jiaotong University

The emergence and development of layered materials have shown great promise for many applications, especially in recent years, the effective modulation of the physicochemical properties of layered materials by intercalation chemistry has led to great potential in material design. In this paper, we review the reaction mechanisms of different guest species(metal atoms/ions, organic molecules/ions, inorganic molecules and inorganic ions)intercalated into the host layered materials as well as the recent progress. It is also reviewed that layered intercalated materials with controllable structure and tunable physicochemical properties can be prepared through the occurrence of interactions between different subjects and guests. The specific applications of intercalation chemistry in the field of electrocatalysis, such as the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction and other electrocatalytic reactions, are then discussed, with emphasis on the mechanism of the improved catalytic activity and stability of the layered materials after guest intercalation.

关键词： Electrocatalysis Guest species Intercalation chemistry Layered materials