检索结果-南通市图书馆

Abrasive wear behavior of cast iron coatings plasma-sprayed at different mild steel substrate temperatures

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2012年第8期19卷 733-738页

作者： Ya-zhe Xing Qiu-lan Wei chao-ping jiang Jian-min Hao School of Materials Science and Engineering Chang'an University Xi'an 710064 China Department of Automotive Engineering Shaanxi College of Communication Technology Xi'an 710018 China

Three kinds of cast iron coatings were prepared by atmospheric plasma spraying. During the spraying, the mild steel substrate temperature was controlled to be averagely 50, 180, and 240℃, respectively. Abrasive wear tests were conducted on the coatings under a dry friction condition. It is ibund that the abrasive wear resistance is enhanced with the substrate temperature increasing. SEM observations show that the wear losses of the coatings during the wear tests mainly result from the spalling of the splats. Furthermore, the improved wear resis- tance of the coatings mainly owes to the formation of oxides and the enhancement in the mechanical properties with the substrate temperature increasing.

关键词： cast iron coatings plasma spraying wear bonding

Wear Resistance and Bond Strength of Plasma Sprayed Fe/Mo Amorphous Coatings

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2014年第10期21卷 969-974页

作者： chao-ping jiang Ya-zhe XING Feng-ying ZHANG Jian-min HAO Xu-ding SONG School of Materials Science and Engineering Chang'an University Key Laboratory of Road Construction Technology and Equipment MOE School of Construction MachineryChang'an University

Fe-based and Fe/Mo composite amorphous coatings were deposited on the surface of plain carbon steel substrates by atmospheric plasma spraying （APS）. With increasing the Mo alloy content, the microstructure of the coatings revealed more dense structure. The porosities of composite coating were all less than those of Fe-based coat- ing due to Mo alloy self-bonding performance. The ML10 friction and wear tester was employed to investigate the wear behaviors of the coatings under dry sliding conditions. It was found that the mass loss of the resultant coatings decreased with increasing Mo-based powders into the feedstock. This was attributed to the reduction of the delamina- tions resulting from improved intersplat bond with Mo addition.

关键词： atmospheric plasma spraying coating delamination wear bond strength

The Effect and Mechanism of Fructus lycii on Improvement of Exercise Fatigue Using a Network Pharmacological Approach with in vitro Experimental Verification

在线全文

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 2024年第1期37卷 42-53页

作者： JI Xiao Ning LIU Zhao ping ZHANG chao Zheng CHEN Min LIANG jiang LU jiang ZHANG Lei National Resource Center for Chinese Materia Medica China Academy of Chinese Medical SciencesBeijing 100700China China National Center for Food Safety Risk Assessment Beijing 100022China Chinese Center for Disease Control and Prevention Beijing 102206China

Objective This study aimed to investigate the effect and underlying mechanism of Fructus lycii in improving exercise *** A network pharmacological approach was used to explore potential mechanisms of action of Fructus *** muscle C2C12 cells and immunofluorescence were employed to verify the effect and mechanism of the representative components in Fructus lycii predicted by network pharmacological *** Six potential active components,namely quercetin,β-sitosterol,stigmasterol,7-Omethylluteolin-6-C-beta-glucoside_qt,atropine,and glycitein,were identified to have potency in improving exercise fatigue via multiple pathways,such as the PI3K-Akt,neuroactive ligand-receptor interaction,IL-17,TNF,and MAPK signaling *** immunofluorescence results indicated that quercetin,a significant active component in Fructus lycii,increased the mean staining area of 2-NBDG,TMRM,and MitoTracker,and decreased the area of CellRox compared to the ***,the protein expression levels of p-38 MAPK,p-MAPK,p-JNK,p-PI3K,and p-AKT markedly increased after quercetin *** Fructus lycii might alleviate exercise fatigue through multiple components and *** these,quercetin appears to improve exercise fatigue by enhancing energy metabolism and reducing oxidative *** PI3K-AKT and MAPK signaling pathways also appear to play a role in this process.

关键词： Fructus lycii Exercise fatigue Network pharmacology

Rhyscotus subrisus Li&jiang,***.,representing a new record family Rhyscotidae from China(Isopoda:Oniscidea)

在线全文

学校读者我要写书评

暂无评论

Zoological Systematics 2024年第2期49卷 181-183页

作者： Chonghui Yao chao jiang Weichun Li College of Agronomy Jiangxi Agricultural UniversityNanchang 330045China State Key Laboratory for Quality Ensurance and Sustainable Use of Dao-di Herbs National Resource Center for Chinese MateriaMedicaChina Academy of Chinese Medical SciencesBeijing 100700China

The family Rhyscotidae Budde-Lund,1904 contains two genera:Rhyscotoides Schmalfuss&Ferrara,1978 and Rhyscotus Budde-Lund,*** date,twenty-one species within the family are known,occurring in the subtropic and tropic regions(Schmalfuss,2003;Schmidt,2003;Boyko et al.,2022).The members of the family can be recognized by the cephalon with a strongly inflated frons,the antennae with two-jointed flagellum,the maxillae are almost semicircular,the maxillipeds have short palpus and endite,and pleopod exopodites without pseudotracheae(Schmalfuss&Ferrara,1978).Before this study,the members of Rhyscotidae were unknown in *** present research describes a new species of the genus Rhyscotus from Hainan Island,representing a new record of the family Rhyscotidae from China.

关键词： record family

Spectrum analysis of interval process model and its application in uncertain vibration analysis

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第8期67卷 2549-2564页

作者： LI JinWu jiang chao NI BingYu State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle College of Mechanical and Vehicle EngineeringHunan UniversityChangsha 410082China

In recent years, the authors have extended the traditional interval method into the time dimension to develop a new mathematical tool called the “interval process model” for quantifying time-varying or dynamic uncertainties. This model employs upper and lower bounds instead of precise probability distributions to quantify uncertainty in a parameter at any given time point. It is anticipated to complement the conventional stochastic process model in the coming years owing to its relatively low dependence on experimental samples and ease of understanding for engineers. Building on our previous work, this paper proposes a spectrum analysis method to describe the frequency domain characteristics of an interval process, further strengthening the theoretical foundation of the interval process model and enhancing its applicability for complex engineering problems. In this approach, we first define the zero midpoint function interval process and its auto/cross-power spectral density(PSD) functions. We also deduce the relationship between the auto-PSD function and the auto-covariance function of the stationary zero midpoint function interval process. Next, the auto/cross-PSD function matrices of a general interval process are defined, followed by the introduction of the concepts of PSD function matrix and cross-PSD function matrix for interval process vectors. The spectrum analysis method is then applied to random vibration problems, leading to the creation of a spectrum-analysis-based interval vibration analysis method that determines the PSD function for the system displacement response under stationary interval process excitations. Finally, the effectiveness of the formulated spectrum-analysis-based interval vibration analysis approach is verified through two numerical examples.

关键词： interval process spectrum analysis power spectral density(PSD) time-varying uncertainty uncertain vibration analysis

Super-high bed sintering for iron ores:problems ascertainment

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1063-1070页

作者： Liang-ping Xu Hui-bo Liu Yu-chao Zhao Qiang Zhong Zhong-lin Dong Guang-hui Li Tao jiang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina

Super-high bed sintering process is an important development direction of iron ore sintering for its lower emission and higher ***,there is a lack of deep understanding of the uneven quality of super-high bed sintering products,and the deterioration of reduction disintegration performance,the thickening of hearth layer and the reduction in energy-saving effect are perplexing enterprises and *** ascertain the problems of super-high bed sintering,ten sintering machines with the areas of 265,280,360,550 and 660 m^(2)and bed depth above 900 mm were sampled and *** results showed that problems were mainly shown in the unevenness of chemical composition,macrostructure,mechanical strength and metallurgical *** chemical composition exhibits severe segregation in both horizontal and vertical directions,with basicity segregation reaching as high as *** uneven macrostructure of sinter is reflected in a 10%difference in porosity and mechanical strength increase in 16%–19%along the vertical *** reducibility and reduction disintegration performance gradually deteriorate along the bed depth,with a difference of 10.5%in reducibility and 7.3%in RDI−0.5 mm(reduction disintegration index of sinter with size smaller than 0.5 mm).

关键词： Super-high bed sintering Uneven sinter performance Segregation Agglomeration Iron ore

Chemoselective and Living/Controlled Polymerization of Alkenyl Methacrylates by the Phosphonium Ylide/Organoaluminum Lewis Pairs

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 159-167,I0005页

作者： Zhi-Kang Chen Wu-chao Zhao Yi-Ling Zhao Cong-Lei Liu Liu-Yin jiang Yue-Tao Zhang Hong-ping Zhu State Key Laboratory of Physical Chemistry of Solid Surfaces College of Chemistry and Chemical EngineeringXiamen UniversityXiamen361005China State Key Laboratory of Supramolecular Structure and Materials College of ChemistryJilin UniversityChangchun130012China

Chemoselective,living/controlled polymerizations of allyl methacrylate(AMA) and vinyl methacrylate(VMA) with/without methyl methacrylate(MMA) by using the phosphonium ylide/organoaluminum based Lewis pairs(LPs) have been *** P-ylide-2/AIMe(BHT)_(2)(Pylide-2=Ph_(3)P=CHMe and BHT=2,6-iBu_(2)-4-MeC_(6)H_(2)O) was demonstrated to be superior by which homopolymers PAMAs(M_(n)=27.6-111.5kg/mol and ■=1.14-1.25) and PVMAs(M_(n)=28.4-78.4 kg/mol and ■=1.12-1.18) and block copolymers PMMA-b-PAMA,PAMA-b-PVMA,PAMA-bPMMA,PMMA-b-PAMA-b-PMMA,PAMA-b-PMMA-b-PAMA,and PAMA-b-PVMA-b-PAMA were *** the polymerizations,all of the monomers were reacted by the conjugated ester vinyl groups leaving intactly the nonconjugated acryloxy *** pendant acryloxy groups attached to the main chain enable further to post-functionalization by the AIBN-induced radical "thiol-ene" reaction using PhCH_(2)*** thiolether side group-containing polymers PAMA-SCH_(2)Ph and PAMA-SCH_(2)Ph-b-PMMA-b-PAMA-SCH_(2)Ph were thus prepared.

关键词： Phosphonium ylide Alkenyl methacrylate Chemoselectivity Living/controlled polymerization Post-functionalization

New Results in Cooperative Adaptive Optimal Output Regulation

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第1期37卷 253-272页

作者： DONG Yuchen GAO Weinan jiang Zhong-ping State Key Laboratory of Synthetical Automation for Process Industries Northeastern UniversityShenyang 110819China Department of Electrical and Computer Engineering Tandon School of EngineeringNew York UniversityBrooklynNY 11201USA

This paper investigates the cooperative adaptive optimal output regulation problem of continuous-time linear multi-agent *** the multi-agent system dynamics are uncertain,solving regulator equations and the corresponding algebraic Riccati equations is challenging,especially for high-order *** this paper,a novel method is proposed to approximate the solution of regulator equations,i.e.,gradient descent *** is worth noting that this method obtains gradients through online data rather than model information.A data-driven distributed adaptive suboptimal controller is developed by adaptive dynamic programming,so that each follower can achieve asymptotic tracking and disturbance ***,the effectiveness of the proposed control method is validated by simulations.

关键词： Adaptive dynamic programming cooperative output regulation gradient descent method multi-agent systems.

Prediction of chemical short-range order in high-/medium-entropy alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 115-123页

作者： Pei-Yu Cao Jing Wang ping jiang Yun-jiang Wang Fu-ping Yuan Xiao-Lei Wu State Key Laboratory of Nonlinear Mechanics Institute of MechanicsChinese Academy of ScienceBeijing 100190China School of Engineering Science University of Chinese Academy of SciencesBeijing 100049China

Chemical short-range orders(CSROs),as the built-in sub-nanoscale entities in a high-/medium-entropy alloy(H/MEA),have aroused an ever-increasing *** multi-principal elements in an H/MEA to form a complex concentrated solution,a variety of sub-systems of species exist to induce the metastable ordered compounds as candidates for ultimate *** issues remain pending on the origin of CSROs as to how to judge if CSRO will form in an H/MEA and particularly,what kind of CSROs would be stably produced if there were multiple ***,the first-principles method,along with the proposed local formation energy calculation in allusion to the atomic-scale chemical heterogeneities,is used to predict the CSRO formation based on the mechanical stability,thermodynamic formation energy,and electronic *** simulations are detailed in an equiatomic ternary VCoNi MEA with three kinds of potential compounds,i.e.,L1_(1),L1_(2),and B2,in the face-centered cubic *** turns out that L1_(1)is stable but hard to grow up so as to become the final CSRO.L1_(1)is further predicted as CSROs in CrCoNi,but unable to form in FeCoNi and CrMnFeCoNi *** predictions are consistent with the experimental *** findings shed light on understanding the formation of *** method is applicable to other H/MEAs to design and tailor CSROs by tuning chemical species/contents and thermal processing for high performance.

关键词： Short-range order High-entropy alloy Microstructure First-principles calculation Gibbs free energy Local electronic density of states