检索结果-南通市图书馆

China Ocean Engineering 2024年第1期38卷 81-92页

作者： LIAO Xi-yu XIA Jin-song chen zhan-yang TANG Qin ZHAO Nan ZHAO Wei-dong GUI Hong-bin Marine Design&Research Institute of China Shanghai 200011China Ship Structure Division China Ship Scientific Research CenterWuxi 214082China College of Ocean Engineering Harbin Institute of TechnologyWeihaiWeihai 264209China State Key Laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentDalian University of TechnologyDalian 116024China School of Foreign Studies Jiangnan UniversityWuxi 214122China

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be ***,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step *** on the wave elevation of uni-and bi-directional waves is also carried *** a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,***,the differences in structural response characteristics of trimaran in different wave fields are *** results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

关键词： CFD-FEA fluid-structure coupling structural responses trimaran bi-directional cross sea

孔内空气间隔对有/无金属罩聚能装药定向侵彻效果的影响

在线全文

学校读者我要写书评

暂无评论

含能材料 2024年第7期32卷 726-736页

作者：蔡静静徐轩陈占扬杨军北京理工大学爆炸科学与技术国家重点实验室北京100081 河南城建学院土木与交通工程学院河南平顶山467036

为了探究孔内径向空气间隔对有/无金属罩聚能装药定向侵彻效果和炸药爆轰能量传递过程的影响,采用ANSYS/LS-DYNA软件,开展孔内装药空气间隔为6,8,10,12,14 cm时的数值模拟研究,分析了聚能装药中有药型罩形成EFP和无药型罩形成聚能气流... 详细信息

为了探究孔内径向空气间隔对有/无金属罩聚能装药定向侵彻效果和炸药爆轰能量传递过程的影响,采用ANSYS/LS-DYNA软件,开展孔内装药空气间隔为6,8,10,12,14 cm时的数值模拟研究,分析了聚能装药中有药型罩形成EFP和无药型罩形成聚能气流的能量集中释放过程,以及对孔壁的定向侵彻深度。结果表明空气间隔小于10 cm时,聚能气流对孔壁的侵彻深度相对于EFP平均侵深分别提高了53%(6 cm)和29%(8 cm)。空气间隔大于10 cm时,EFP平均侵彻深度相比于聚能气流均增加了26%(12 cm和14 cm)。计算聚能轴线上EFP和聚能气流单位面积通过孔壁的动能,发现空气间隔较小时,聚能气流在空气中衰减耗散的能量小于EFP塑性变形耗能,此时聚能气流对孔壁的侵彻效果较优;空气间隔较大时,爆轰产物空间膨胀造成聚能气流轴线处的密度和动能显著降低,而EFP由于具有高密度和不可压缩性,能量分散小,动能衰减缓慢,此时EFP对孔壁的侵彻效果优于聚能气流。

关键词：聚能装药空气间隔聚能气流爆炸能量定向控制

同方期刊数据库

Irreducible Representations of GL_(n)(C)of Minimal Gelfand-Kirillov Dimension

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第3期40卷 639-657页

作者： zhan Qiang BAI yang yang chen Dong Wen LIU Bin Yong SUN School of Mathematical Sciences Soochow UniversitySuzhou 215006P.R.China School of Sciences JiangnanUniversityWui214122P.R.China School of Mathematical Sciences Zhejiang UniversityHangzhou 310058P.R.China Institute for Advanced Study in Mathematics Zhejiang UniversityHangzhou 310058P.R.China

In this article,by studying the Bernstein degrees and Goldie rank polynomials,we es-tablish a comparison between the irreducible representations of G=GL_(n)(C)possessing the minimal Gelfand-Kirillov dimension and those induced from finite-dimensional representations of the maximal parabolic subgroup of G of type(n-1,1).We give the transition matrix between the two bases for the corresponding coherent families.

关键词： Bernstein degree coherent continuation Gelfand-Kirillov dimension

Late Cenozoic uplift of the Liupan Mountains:Evidence from the Neogene loess deposits

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第5期67卷 1480-1488页

作者： Zhilin HE Yansong QIAO Zhengtang GUO Chaoqin chen Long chen yang FU Ye yang Yanxia LIANG Xinru LIN Guoqiao XIAO Tao zhan Key Laboratory of Cenozoic Geology and Environment Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China Institute of Geomechanics Chinese Academy of Geological SciencesBeijing 100081China CAS Center for Excellence in Life and Paleoenvironment Beijing 100044China University of Chinese Academy of Sciences Beijing 100049China Institute of Ecological Geology Survey and Research of Heilongjiang Province Harbin 150030China School of Geography and Information Engineering China University of GeosciencesWuhan 430078China School of Earth Sciences China University of GeosciencesWuhan 430074China Natural Resources Survey Institute of Heilongjiang Province Harbin 150036China

The Liupan Mountains,one of the important mountain ranges in western China,are located on the boundary between the northeastern Tibetan Plateau and the Ordos *** uplift history of the Liupan Mountains remains *** deposits are good tracers of regional tectonic and geomorphic changes,because loess is sensitive to erosion and the formation and preservation of loess requires relatively flat highlands and relatively stable tectonic *** investigated the distribution of Neogene loess deposits on the western piedmont of the Liupan Mountains and examined a near-continuous loess section(Nanping section)on the piedmont alluvial *** of magnetic susceptibility stratigraphy with the QA-ⅠMiocene loess sequence dates this 56-m section covering the interval from~8.1 to 6.2 *** lower boundary age of this section,together with previously reported Zhuanglang red clay(sand-gravel layers with intercalated loess during~9–8 Ma and near-continuous loess during~8–4.8 Ma)and Chaona red clay(~8.1–2.58 Ma),indicates that the Liupan Mountains were uplifted in the late Miocene(~9–8 Ma)and basically formed by~8 Ma,attesting to no intense mountain building since that *** addition,based on the information from the Zhuanglang core and the QA-Ⅰsection,we infer that sizable parts of the Liupan Mountains were uplifted during the late Oligocene–early Miocene and did not experience intense uplift during~22–9 Ma.

关键词： Liupan Mountains Mountain building Neogene Loess Chinese Loess Plateau Late Miocene Late Oligocene–early Miocene

Preparation and Analysis of Carbon Fiber-Silicon Carbide Thermally Conductive Asphalt Concrete

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第4期20卷 705-723页

作者： Zhiyong yang Enjie Hu Lei Xi Zhi chen Feng Xiong Chuanhai zhan School of Civil Engineering and Environment Hubei University of TechnologyWuhan430068China

An experimental investigation into the thermal conductivity of CF-SiC two-phase composite asphalt concrete is *** main objective of this study was to verify the possibility of using SiC powder instead of mineral powder as the thermal conductive filler to prepare a new type of asphalt concrete and improve the efficiency of electrothermal snow and ice melting systems *** thermal conductivity of asphalt concrete prepared with different thermally conductive fillers was tested by a transient plane source method,and the related performances were *** the temperature rise rate and surface temperature were studied through field heating ***,the actual ice melting efficiency of the thermally conductive asphalt concrete was evaluated using an effective electrothermal *** shown by the experimental results,the composite made of SiC powder and carbon fiber has a high thermal *** SiC replaces mineral powder,the thermal conductivity of the asphalt mixture increases first and then decreases with the increase of carbon fiber *** the present study,in particular,the thermal conductivity attained a peak when the carbon fiber content was 0.2%of the aggregate mass.

关键词： Carbon fiber silicon carbide thermally conductive asphalt concrete road performance electrothermal snow melting

Hexokinase 1 and 2 mediates glucose utilization to regulate the synthesis of kappa casein via ribosome protein subunit 6 kinase 1 in bovine mammary epithelial cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Animal Nutrition 2024年第1期16卷 338-349页

作者： Tianyu yang Jia Guo Han Song Osmond Datsomor Yuhang chen Maocheng Jiang Kang zhan Guoqi Zhao Institute of Animal Culture Collection and Application College of Animal Science and Technology Yangzhou University

Glucose plays a vital part in milk protein synthesis through the mTOR signaling pathway in bovine mammary epithelial cells(BMEC). The objectives of this study were to determine how glucose affects hexokinase(HK) activity in BMEC and investigate the regulatory effect of HK in kappa casein(CSN3)synthesis via the mechanistic target of rapamycin complex 1(mTORC1) signaling pathway in BMEC. For this, HK1 and HK2 were knocked out in BMEC using the CRISPR/Cas9 system. The gene and protein expression, glucose uptake, and cell proliferation were measured. We found that glucose uptake, cell proliferation, CSN3 gene expression levels, and expression of HK1 and HK2 increased with increasing glucose concentrations. Notably, glucose uptake was significantly reduced in HK2 knockout(HK2KO)BMEC treated with 17.5 mM glucose. Moreover, under the same glucose treatment conditions, the proliferative ability and abundance of CSN3 were significantly diminished in both HK1 knockout(HK1KO)and HK2KO BMEC compared with that in wild-type BEMC. We further observed that the phosphorylation levels of ribosome protein subunit 6 kinase 1(S6K1) were reduced in HK1KO and HK2KO BMEC following treatment with 17.5 mM glucose. As expected, the levels of glucose-6-phosphate and the m RNA expression levels of glycolysis-related genes were decreased in both HK1KO and HK2KO BMEC following glucose treatment. These results indicated that the knockout of HK1 and HK2 inhibited cell proliferation and CSN3 expression in BMEC under glucose treatment, which may be associated with the inactivation of the S6K1 and inhibition of glycolysis.

关键词： Glucose Hexokinase Milk protein Mechanistic target of rapamycin complex 1 signaling pathway Bovine mammary epithelial cell Kappa casein

More than just aligning the teeth:Clear aligners with multifunctional prowess

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 7665-7674页

作者： yang chen Lei-Ming Cao Nian-Nian Zhong Zi-zhan Li Lin-Lin Bu Fang-Yi Huo Hong He State Key Laboratory of Oral and Maxillofacial Reconstruction and Regeneration Key Laboratory of Oral Biomedicine Ministry of EducationHubei Key Laboratory of StomatologySchool and Hospital of StomatologyWuhan UniversityWuhan 430079China Department of Oral and Maxillofacial-Head Neck Oncology School and Hospital of StomatologyWuhan UniversityWuhan 430079China Department of Zhuankou Clinical Branches School and Hospital of StomatologyWuhan UniversityWuhan 430000China Department of Orthodontics School and Hospital of StomatologyWuhan UniversityWuhan 430079China

With the increasing demand for beauty and health,clear aligners(CAs)have been widely applied among patients with ***,patients treated with CAs also face some potential complications,such as demineralization,dental caries,and periodontal *** addition,some patients have additional needs to improve their quality of life,such as bleaching *** order to prevent or solve these problems,the modification of CAs is a promising method because their extensive long-term contact with tooth surfaces makes them ideal devices for implementing adjuvant medical *** this review,we discuss various advanced CAs with medical functions based on the clinical needs of *** far as we know,the additional functions of CAs mainly include antibacterial,remineralization,whitening,and accelerating tooth *** functions are achieved by two major pathways,the combination of CAs with drugs/biomaterials and increasing the capacity or affinity of *** addition,we discuss the current limitations of in vitro experiments which are designed to explore the effectiveness and properties of novel CAs,and the challenges of bringing a multifunctional appliance from proposal to clinical *** the end of this review,we provide insights into the broader prospects for the improvement of CAs.

关键词： advanced clear aligners medical device modification drug delivery system personalized medicine

Aero-structural design of joined-wing aircraft based on high-fidelity model

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 363-377页

作者： cheng HE Fengjiang zhan Luchuang MA Gang chen Jianying MA Unmanned Air Vehicle Research Institute Nanjing University of Aeronautics and AstronauticsNanjing 210016China Key Laboratory of Advanced Technology for Small and Medium-sized UAV Ministry of Industry and Information TechnologyNanjing University of Aeronautics and AstronauticsNanjing 210016China Aerospace System Engineering Shanghai Shanghai 201108China

The joined-wing configuration reduces induced drag and structural weight by connecting the rear wing to the front *** addition,the rear wing can replace the role of the horizontal tail of a conventional aircraft,thus eliminating the aerodynamic drag and weight associated with the horizontal *** particular shape creates a highly coupled relationship between aerodynamics and structure,which must be fully considered during the overall design process to enhance aircraft *** this research,an aero-structural design model of the joined-wing aircraft is constructed based on high-fidelity computational fluid dynamics and structural finite element *** model is able to obtain accurate aerodynamic loads for the non-planar wing and to simulate the statically indeterminate structure of the closed wing *** influence of the joined-wing shape parameters on the aerodynamic and structural disciplines,as well as the influence of geometric nonlinear characteristics,deformation constraints and buckling constraints on the structural weight are all taken into *** model is applied to complete the aero-structural design optimization of a high-altitude long-endurance joined-wing aircraft,and wind tunnel tests are *** test results verify the credibility of the design model proposed and the validity of the design environment.

关键词： Joined-wing configuration Aircraft design Aero-structural design Finite element Wind tunnel test

Stabilizing iridium sites via interface and reconstruction regulations for water oxidation in alkaline and acidic media

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第2期89卷 355-363,I0009页

作者： Weibin chen Yanhui Song Lei Li Junjie Guo zhan Lin Guangdong Provincial Key Laboratory of Plant Resources Biorefinery School of Chemical Engineering and Light IndustryGuangdong University of TechnologyGuangzhou 510006GuangdongChina Key Laboratory of Interface Science and Engineering in AdvancedMaterials Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024ShanxiChina

Exploring effective iridium(Ir)-based electrocatalysts with stable iridium centers is highly desirable for oxygen evolution reaction(OER).Herein,we regulated the incorporation manner of Ir in Co_(3)O_(4)support to stabilize the Ir sites for effective *** anchored on the surface of Co_(3)O_(4)in the form of Ir(OH)_6 species,the created Ir-OH-Co interface leads to a limited stability and poor acidic OER due to Ir *** doped into Co_(3)O_(4)lattice,the analyses of X-ray absorption spectroscopy,in-situ Raman,and OER measurements show that the partially replacement of Co in Co_(3)O_(4)by Ir atoms inclines to cause strong electronic effect and activate lattice oxygen in the presence of Ir-O-Co interface,and simultaneously master the reconstruction effect to mitigate Ir dissolution,realizing the improved OER activity and stability in alkaline and acidic *** a result,Ir_(lat)@Co_(3)O_(4)with Ir loading of 3.67 wt%requires 294±4 mV/285±3 mV and 326±2 mV to deliver 10 mA cm^(-2)in alkaline(0.1 M KOH/1.0 M KOH)and acidic(0.5 M H_(2)SO_(4))solution,respectively,with good stability.

关键词： Interface effect Reconstruction Ir dissolution Ir-O-Co Oxygen evolution reaction

Multifunctional cellular carbon foams derived from chitosan toward self-cleaning, thermal insulation, and highly efficient microwave absorption properties

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 927-938页

作者： Beibei zhan Yanling Hao Xiaosi Qi Yunpeng Qu Junfei Ding Jing-liang yang Xiu Gong Yanli chen Qiong Peng Wei Zhong College of Physics Guizhou Province Key Laboratory for Photoelectrics Technology and ApplicationGuizhou UniversityGuiyang 550025China Minzu Normal University of Xingyi Xingyi 562400China National Laboratory of Solid State Microstructures and Jiangsu Provincial Laboratory for NanoTechnology Nanjing UniversityNanjing 210093China

To adapt the practical demand,designing and constructing the multifunctional microwave absorbers(MAs)is the key future direction of research and ***,effective integrating the multiple functions into a single material remains a huge ***,cellular carbon foams(CCFs)with different porous structures were elaborately designed and fabricated in high efficiency through a facile continuous freeze-drying and carbonization processes using a sustainable biomass chitosan as the *** obtained results revealed that the thermal treated temperature and g-C_(3)N_(4) amount played a great impact on the carbonization degrees,pore sizes,and morphologies of CCFs,which led to their tunable electromagnetic(EM)parameters,improved conduction loss,and polarization loss *** to the special cellular structure,the designed CCFs samples simultaneously displayed the strong absorption capabilities,broad absorption bandwidths,and thin matching ***,the as-prepared CCFs exhibited the strong hydrophobicity and good thermal insulation,endowing its attractive functions of self-cleaning and thermal ***,our findings not only presented a facile approach to produce different porous structures of CCFs,but also provided an effective strategy to develop multifunctional high-performance MAs on basis of three-dimensional CCFs.

关键词： multifunctional microwave absorbers carbon foams cellular structure self-cleaning thermal insulation