检索结果-南通市图书馆

Surface treatment of titanium dental implant with H2O2 solution

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2020年第9期27卷 1281-1286页

作者： Mohammad Khodaei Kamran Amini alireza valanezhad Ikuya Watanabe Department of Materials Science and Engineering Golpayegan University of TechnologyGolpayegan ***Iran Center for Advanced Engineering Research Majlesi BranchIslamic Azad UniversityIsfahan 196151194Iran Department of Dental and Biomedical Materials Science Graduate School of Biomedical SciencesNagasaki University1-7-1 SakamotoNagasaki 852-8588Japan

The surface treatment is important for titanium and its alloys as promising candidates for dental implantation due to their bioinert surface.Titanium surface samples were modified using H2O2 solution at different times up to 72 h to boost their bioactivity.According to the results of the field emission scanning electron microscopy test,some nanostructures are formed on the surface of treated titanium samples and increased in size by increasing the time of treatment up to 24 h.After 24 h of application,the sharpness of nanostructures decreased and the micro-cracks and discontinuity in the coating surface increased.The results of the X-ray diffraction study and Raman spectroscopy revealed that anatase(TiO2)was formed on the surface of treated titanium samples.The peak intensity of Raman spectroscopy increased with an improvement in treatment time of up to 24 h and then decreased due to the discontinuity of the coating.Full wettability and ability to form apatite were reached at 6 h of treatment.It is clear that the treatment time has a significant effect on the surface treatment of titanium using the H2O2 solution.

关键词： titanium implant surface treatment hydrogen peroxide anatase dental implant

Fabrication and Characterization of Poly Lactic Acid Scaffolds by Fused Deposition Modeling for Bone Tissue Engineering

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2020年第1期35卷 248-251页

作者： Mohammad Khodaei Kamran Amini alireza valanezhad Department of Materials Science and Engineering Golpayegan University of TechnologyGolpayeganIran Department of Materials Engineering Tiran BranchIslamic Azad UniversityIsfahanIran Center for Advanced Engineering Research Majlesi BranchIslamic Azad UniversityIsfahanIran Department of Dental and Biomedical Materials Science Nagasaki UniversityNagasakiJapan

Three-dimensional porous poly-lactic acid(PLA) scaffold was fabricated using fused deposition modeling(FDM) method including 30%, 50% and 70% nominal porosity. Study of phases in initial polymeric material and printed scaffolds was done by X-ray diffraction(XRD), and no significant phase difference was observed due to the manufacturing process, and the poly-lactic acid retains its crystalline properties. The results of the mechanical properties evaluation by the compression test show that the mechanical properties of the scaffold have decreased significantly with increasing the porosity of scaffold. The microstructure of scaffolds were studied by scanning electron microscope(SEM), showing that the pores had a regular arrangement and their morphology changed with porosity change. The mechanical properties of the poly-lactic acid scaffolds printed using fused deposition modeling, can be adapted to the surrounding tissue, by porosity change.

关键词： 3D porous scaffold fused deposition modeling poly-lactic acid biodegradable polymer

Prevalence of Anemia in Patients with Diabetes Mellitus:A Systematic Review and Meta-Analysis

在线全文

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 2024年第1期37卷 96-107页

作者： Monireh Faghir-Ganji Narjes Abdolmohammadi Maryam Nikbina alireza Amanollahi alireza Ansari-Moghaddam Rozhan Khezri Hamidreza Baradaran Student Research Committee Iran University of Medical SciencesTehranIran Department of Epidemiology School of Public HealthIran University of Medical SciencesTehranIran Department of Epidemiology School of Public HealthTehran University of Medical SciencesTehranIran Department of Midwifery Shoushtar Faculty of Medical SciencesShoushtarIran Department of Epidemiology School of Public Health and SafetyShahid Beheshti University of Medical SciencesTehranIran Trauma and Injury Research Center Iran University of Medical SciencesTehranIran Health Promotion Research Center Zahedan University of Medical SciencesZahedanIran Endocrine Research Center Institute of Endocrinology and MetabolismIran University of Medical SciencesTehranIran

Objective Anemia is a common public health concern in patients with type 2 diabetes worldwide.This study aimed to identify the prevalence of anemia among patients with diabetes.Methods Electronic databases,including PubMed,Scopus,Web of Sciences,and Google Scholar,were searched systematically for studies published between 2010 and 2021.After removing duplicates and inappropriate reports,the remaining manuscripts were reviewed and appraised using theNewcastleOttawa Scale(NOS)tool.A random-effects model was used to calculate the pooled estimates of the extracted data using Stata version 17.Heterogeneity of the studies was assessed using the Q statistic.Results A total of 51 articles containing information on 26,485 patients with diabetes were included in this study.The articles were mainly from Asia(58.82%)and Africa(35.29%).The overall prevalence of anemia was 35.45%(95%CI:30.30–40.76),with no evidence of heterogeneity by sex.Among the two continents with the highest number of studies,the prevalence of anemia in patients with diabetes was significantly higher in Asia[40.02;95%CI:32.72–47.54]compared to Africa[28.46;95%CI:21.90–35.50](P for heterogeneity=0.029).Moreover,there has been an increasing trend in the prevalence of anemia in patients with diabetes over time,from[15.28;95%CI:9.83–22.21]in 2012 to[40.70;95%CI:10.21–75.93]in 2022.Conclusion Globally,approximately 4 in 10 patients with diabetes suffer from anemia.Therefore,routine anemia screening and control programs every 3 months might be useful in improving the quality of life of these patients.

关键词： Prevalence Diabetic foot Anemia Diabetes mellitus

Tidal modeling based on satellite altimetry observations of TOPEX/ Poseidon, Jason1, Jason2, and Jason3 with high prediction capability: A case study of the Baltic Sea

在线全文

学校读者我要写书评

暂无评论

Geodesy and Geodynamics 2024年第4期15卷 404-418页

作者： alireza A.Ardalan Asiyeh Hashemifaraz School of Surveying and Geospatial Engineering College of EngineeringUniversity of TehranTehran 11155-4563Iran

This research aims to optimize the utilization of long-term sea level data from the TOPEX/Poseidon,Jason1,Jason2,and Jason3 altimetry missions for tidal modeling.We generate a time series of along-track observations and apply a developed method to produce tidal models with specific tidal constituents for each location.Our tidal modeling methodology follows an iterative process:partitioning sea surface height(SSH)observations into analysis/training and prediction/validation parts and ultimately identi-fying the set of tidal constituents that provide the best predictions at each time series location.The study focuses on developing 1256 time series along the altimetry tracks over the Baltic Sea,each with its own set of tidal constituents.Verification of the developed tidal models against the sSH observations within the prediction/validation part reveals mean absolute error(MAE)values ranging from 0.0334 m to 0.1349 m,with an average MAE of 0.089 m.The same validation process is conducted on the FES2014 and EOT20 global tidal models,demonstrating that our tidal model,referred to as BT23(short for Baltic Tide 2023),outperforms both models with an average MAE improvement of 0.0417 m and 0.0346 m,respectively.In addition to providing details on the development of the time series and the tidal modeling procedure,we offer the 1256 along-track time series and their associated tidal models as supplementary materials.We encourage the satellite altimetry community to utilize these resources for further research and applications.

关键词： Satellitealtimetry Baltic Sea Ocean tide modeling Jason3 Jason2 Jason1 TOPEX/Poseidon EOT20 FES2014

Synergistic effect of adsorption and photocatalytic degradation of oilfield-produced water by electrospun photocatalytic fibers of Polystyrene/Nanorod-Graphitic carbon nitride

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第7期141卷 287-303页

作者： Parisa Azmoon Mehrdad Farhadian alireza Pendashteh Amir H.Navarchian Department of Chemical Engineering Faculty of EngineeringUniversity of IsfahanIsfahanIran Department of Chemical Engineering Faculty of EngineeringUniversity of GuilanRashtIran Department of Water and Environmental Engineering Caspian Sea Basin Research CenterUniversity of GuilanRashtIran

Graphitic carbon nitride with nanorod structure(Nr-GCN)was synthesized using melamine as a precursor without any other reagents by hydrothermal pretreatment method.XRD,FTIR,SEM,N_(2)adsorption-desorption from BET,UV-Vis DRS spectroscopy,and photoluminescence were used to characterize the prepared samples.Also,the photoelectrochemical behavior of nanoparticles was studied by photocurrent transient response and cyclic voltammetry analysis.Polystyrene(PS)fibrous mat was fabricated by electrospinning technique and used as a support for the stabilization of the nanoparticles.The performance of the synthesized nanoparticles and photocatalytic fibers(PS/Nr-GCN)was evaluated in oilfield-produced water treatment under visible light irradiation.During this process,oil contaminants were adsorbed by hydrophobic polystyrene fibers and simultaneously degraded by Nr-GCN.The removal efficiency of chemical oxygen demand(COD)has been obtained 96.6%and 98.4%by Nr-GCN and PS/Nr-GCN,respectively,at the optimum conditions of pH4,photocatalyst dosage 0.5 g/L,COD initial concentration 550 mg/L,and illumination time 150 min.The gas chromatography-mass spectroscopy analysis results showed 99.3%removal of total petroleum hydrocarbons using photocatalytic fibers of PS/Nr-GCN.The results demonstrated that the GCN has outstanding features like controllable morphology,visible-light-driven,and showing high potential in oily wastewater remediation.Moreover,the synergistic effect of adsorption and photocatalytic degradation is an effective technique in oilfield-produced water treatment.

关键词： Graphitic carbon nitride(GCN) Nanorod structure Polystyrene fibrous mat Photocatalytic fibers Oilfield-produced water(OPW)

Distributed Energy and Reserve Scheduling in Local Energy Communities Using L-BFGS Optimization

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 942-952页

作者： Mohammad Dolatabadi alireza Zakariazadeh Alberto Borghetti Pierluigi Siano Department of Management&Innovation Systems University of SalernoSalernoItaly Department of Electrical Electronicand Information EngineeringUniversity of BolognaBolognaItaly University of Science and Technology of Mazandaran BehshahrIran Department of Power Systems National University of Science and Technology POLITEHNICA BucharestBucharestRomania IEEE

Encouraging citizens to invest in small-scale renewable resources is crucial for transitioning towards a sustainable and clean energy system.Local energy communities(LECs)are expected to play a vital role in this context.However,energy scheduling in LECs presents various challenges,including the preservation of customer privacy,adherence to distribution network constraints,and the management of computational burdens.This paper introduces a novel approach for energy scheduling in renewable-based LECs using a decentralized optimization method.The proposed approach uses the Limitedmemory Broyden–Fletcher–Goldfarb–Shanno(L-BFGS)method,significantly reducing the computational effort required for solving the mixed integer programming(MIP)problem.It incorporates network constraints,evaluates energy losses,and enables community participants to provide ancillary services like a regulation reserve to the grid utility.To assess its robustness and efficiency,the proposed approach is tested on an 84-bus radial distribution network.Results indicate that the proposed distributed approach not only matches the accuracy of the corresponding centralized model but also exhibits scalability and preserves participant privacy.

关键词： Distributed optimization flexibility services L-BFGS method local energy community renewables reserve

Nanofabricated high turn-density spiral coils for on-chip electromagneto-optical conversion

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第2期10卷 181-192页

作者： Ilhan Bok alireza Ashtiani Yash Gokhale Jack Phillips Tianxiang Zhu Aviad Hai Department of Biomedical Engineering University of Wisconsin–MadisonMadisonWIUSA Department of Electrical and Computer Engineering University of Wisconsin–MadisonMadisonWIUSA Wisconsin Institute for Translational Neuroengineering(WITNe) University of Wisconsin–MadisonMadisonWIUSA

Circuit-integrated electromagnets are fundamental building blocks for on-chip signal transduction,modulation,and tunability,with specific applications in environmental and biomedical micromagnetometry.A primary challenge for improving performance is pushing quality limitations while minimizing size and fabrication complexity and retaining spatial capabilities.Recent efforts have exploited highly involved three-dimensional synthesis,advanced insulation,and exotic material compositions.Here,we present a rapid nanofabrication process that employs electron beam dose control for high-turn-density diamond-embedded flat spiral coils;these coils achieve efficient on-chip electromagnetic-to-optical signal conversion.Our fabrication process relies on fast 12.3 s direct writing on standard poly(methyl methacrylate)as a basis for the metal lift-off process.Prototypes with 70 micrometer overall diameters and 49–470 nm interturn spacings with corresponding inductances of 12.3–12.8 nH are developed.We utilize optical micromagnetometry to demonstrate that magnetic field generation at the center of the structure effectively correlates with finite element modeling predictions.Further designs based on our process can be integrated with photolithography to broadly enable optical magnetic sensing and spin-based computation.

关键词： utilize retaining high

Dental-derived stem cells in tissue engineering:the role of biomaterials and host response

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Regenerative Biomaterials 2024年第1期3卷 17-26页

作者： Weihao Yuan Luiza de Almeida Queiroz Ferreira Bo Yu Sahar Ansari alireza Moshaverinia Weintraub Center for Reconstructive Biotechnology Section of ProsthodonticsSchool of DentistryUniversity of CaliforniaLos AngelesLos AngelesCA 90095USA Department of Restorative Dentistry School of DentistryUniversidade Federal de Minas GeraisBelo HorizonteMinas GeraisBrazil Section of Restorative Dentistry School of DentistryUniversity of CaliforniaLos AngelesLos AngelesCA 90095USA Department of Bioengineering Henry Samueli School of Engineering and Applied SciencesUniversity of CaliforniaLos AngelesLos AngelesCA 90095USA

Dental-derived stem cells(DSCs)are attractive cell sources due to their easy access,superior growth capacity and low immunogenicity.They can respond to multiple extracellular matrix signals,which provide biophysical and biochemical cues to regulate the fate of residing cells.However,the direct transplantation of DSCs suffers from poor proliferation and differentiation toward functional cells and low survival rates due to local inflammation.Recently,elegant advances in the design of novel biomaterials have been made to give promise to the use of biomimetic biomaterials to regulate various cell behaviors,including proliferation,differentiation and migration.Biomaterials could be tailored with multiple functionalities,e.g.,stimuli-responsiveness.There is an emerging need to summarize recent advances in engineered biomaterials-mediated delivery and therapy of DSCs and their potential applications.Herein,we outlined the design of biomaterials for supporting DSCs and the host response to the transplantation.

关键词： dental-derived stem cells biomaterials host response tissue engineering

Hydrodynamic Assessment of A New Nature-Based Armour Unit on Rubble Mound Breakwater for Coastal Protection

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 439-452页

作者： Ehsan SAFA alireza MOJTAHEDI Abdolmajid MOHAMMADIAN Mohamad Ali Lotfollahi YAGHIN Department of Water Resources Engineering Faculty of Civil EngineeringUniversity of TabrizTabriz ***Iran Faculty of Civil Engineering University of OttawaOttawa K1H 8M5Canada

This research proposes a novel nature-based design of a new concrete armour unit for the cover layer of a rubblemoundbreakwater. Armour units are versatile with respect to shape, orientation, surface condition details, and porosity.Therefore, a detailed analysis is required to investigate the exact state of their hydraulic interactions and structuralresponses. In this regard, the performance results of several traditional armour units, including the Antifer cube,Tetrapod, X-block and natural stone, are considered for the first step of this study. Then, the related observed resultsare compared with those obtained for a newly designed (artificial coral) armour unit. The research methodology utilizesthe common wave flume test procedure. Furthermore, several verified numerical models in OpenFOAM code areused to gain the extra required data. The proposed armour is configured to provide an effective shore protection as anenvironmental-friendly coastal structure. Thus it is designed with a main trunk including deep grooves to imitate thetypical geometry of a coral type configuration, so as to attain desirable performance. The observed results and ananalytic hierarchy process (AHP) concept are used to compare the hydraulic performance of the studied traditionaland newly proposed (artificial coral) armour units. The results indicate that the artificial coral armour unit demonstratesacceptable performance. The widely used traditional armour units might be replaced by newer designs for betterwave energy dissipation, and more importantly, for fewer adverse effects on the marine environment.

关键词： rubble mound breakwater hydraulic interaction armour unit analytic hierarchy process numerical model