检索结果-南通市图书馆

Improvement of geotechnical properties of sabkha soil utilizing cement kiln dust

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2017年第4期9卷 749-760页

作者： Abdullah A.Al-Homidy Mohammed H.Dahim ahmed K.Abd el Aal Department of Civil Engineering Najran University Geology Department Faculty of ScienceAl Azhar University

Improvement of properties of weak soils in terms of strength,durability and cost is the key from engineering point of *** weak soils could be stabilized using mechanical and/or chemical *** added during chemical stabilization could improve the engineering properties of treated *** utilized have to satisfy noticeable performance,durability,low price,and can be easily *** cement kiln dust(CKD) is industrial by-product,it would be a noble task if this waste material could be utilized for stabilization of sabkha *** study investigates the feasibility of utilizing CKD for improving the properties of sabkha *** samples are prepared with 2% cement and 10%,20% or 30% CKD and are tested to determine their unconfined compressive strength(UCS),soaked California bearing ratio(CBR) and *** of stabilization is studied utilizing advanced techniques,such as the scanning electron microscope(SEM),energy dispersive X-ray analysis(EDX),backscattered electron image(BEI) and X-ray diffraction analysis(XRD).It is noted that the sabkha soil mixed with 2% cement and 30% CKD could be used as a sub-base material in rigid *** incorporation of CKD leads to technical and economic benefits.

关键词： Sabkha soil Geotechnical properties Soil improvement Cement kiln dust(CKD) Unconfined compressive strength(UCS) Soaked California bearing ratio(CBR) Durability

Influence of preceding crop and tillage system on forage yield and quality of selected summer grass and legume forage crops under arid conditions

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2022年第11期21卷 3329-3344页

作者： Hend H.M.HASSAN el-Sayed E.A.el-SOBKY elsayed MANSOUR ahmed S.M.el-KHOLY Mohamed F.AWAD Hayat ULLAH Avishek DATTA Forage Crops Research Department Field Crops Research InstituteAgricultural Research CenterGiza 12619Egypt Agronomy Department Faculty of AgricultureZagazig UniversityZagazig 44519Egypt Department of Biology College of ScienceTaif UniversityTaif 21944Saudi Arabia Agricultural Systems and Engineering Department of FoodAgriculture and BioresourcesSchool of EnvironmentResources and DevelopmentAsian Institute of TechnologyKlong LuangPathum Thani 12120Thailand

Among the crop production factors,preceding crop and tillage management affect the sustainable use of soil resources and ultimately crop growth and *** study aimed at investigating the impact of preceding winter crops(grass or legume)and different tillage systems on forage yield,quality and nutritive values of three summer grass(Sudan grass,pearl millet and teosinte)and two legume forage crops(cowpea and guar)under arid *** results exhibited that growing forage crops after legumes(as berseem clover)produced the highest fresh and dry forage yields and quality attributes compared with grasses(as wheat)with the exception of crude fiber content,which was ***,tillage practices showed positive impact on forage yields and quality *** maximum forage yields and quality parameters were recorded under conventional tillage(CT)practice compared with reduced tillage(RT)and no-tillage(NT)*** the evaluated crops,the highest yields of fresh forage,dry forage,crude fiber,crude protein and total digestible nutrient were exhibited by grass forage crops(Sudan grass,pearl millet and teosinte),whereas the highest crude protein content and the digestible energy values were produced by legume forage crops(cowpea and guar).The maximum fresh forage,dry forage,crude fiber,crude protein,total digestible nutrient and digestible crude protein yields were produced by pearl millet followed by Sudan grass under CT and RT after berseem *** highest net return was recorded by sowing pearl millet after berseem clover and applying CT followed by RT practices,which could be recommended for the commercial ***,it could be assumed that the combination of growing grass forage crops after legume crops under CT or RT systems could enhance forage crop yield and quality with an improvement in soil properties for sustainable agriculture with low cost and the highest net income.

关键词： soil tillage preceding crop forage quality nutritive values net return

A New Intelligent Approach for Deaf/Dumb People based on Deep Learning

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2022年第9期72卷 6045-6060页

作者： Haitham elwahsh ahmed elkhouly Emad Abouel Nasr Ali K.Kamrani Engy el-shafeiy Computer Science Department Faculty of Computers and InformationKafrelsheikh UniversityKafrelsheikhEgypt Industrial Engineering Department College of EngineeringKing Saud UniversityRiyadh 11421Saudi Arabia Industrial Engineering Department College of EngineeringUniversity of HoustonHoustonTX 77204-4008USA Department of Computer Science Faculty of Computers and Artificial IntelligenceUniversity of Sadat CitySadat CityEgypt

People who are deaf or have difficulty speaking use sign language,which consists of hand gestures with particular motions that symbolize the“language”they are communicating.A gesture in a sign language is a particular movement of the hands with a specific shape from the fingers and whole *** this paper,we present an Intelligent for Deaf/Dumb People approach in real time based on Deep Learning using Gloves(IDLG).The approach IDLG offers scientific contributions based deep-learning,a multimode command techniques,real-time,and effective use,and high accuracy *** this purpose,smart gloves working in real time were *** data obtained from the gloves was processed using deep-learning-based approaches and classified multi-mode commands that allow dumb people to speak with regular people via their smart ***,the glove has five flex sensors and an accelerometer using to achieve Low-Cost Control *** flex sensor generates a proportional change in resistance for each individual *** processing of these hand gestures is in Atmega32A Microcontroller which is an advance version of the microcontroller and the lab view *** compares the input signal to memory-stored specified voltage *** performance of the IDLG approach was verified on a dataset created using different hand gestures from 20 different *** the test using the IDLG approach on 10,000 data points,process time performance of milliseconds was achieved with 97%accuracy.

关键词： Deep learning flex sensor labview Atmega32A low-cost control system accelerometer intelligent glove

Improved RC6 Block Cipher Based on Data Dependent Rotations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2022年第1期70卷 1921-1934页

作者： Osama S.Faragallah Ibrahim F.elashry ahmed AlGhamdi Walid el-Shafai S.el-Rabaie Fathi E.Abd el-Samie Hala S.el-sayed Mohamed A.elaskily Department of Information Technology College of Computers and Information TechnologyTaif UniversityP.O.Box 11099Taif21944Saudi Arabia Department of electrical Communications Faculty of EngineeringKafrelsheikh UniversityKafrelsheikhEgypt Department of Computer Engineering College of Computers and Information TechnologyTaif UniversityP.O.Box 11099Taif21944Saudi Arabia Department of electronics and electrical Communications Faculty of Electronic EngineeringMenoufia UniversityMenouf32952Egypt Department of electrical Engineering Faculty of EngineeringMenoufia UniversityShebin El-Kom32511Egypt Department of Informatics Electronic Research Institute(ERI)CairoEgypt

This paper introduces an Improved RC6(IRC6)cipher for data encryption based on data-dependent *** proposed scheme is designed with the potential of meeting the needs of the Advanced Encryption Standard(AES).Four parameters are used to characterize the proposed *** parameters are the size of the word(w)in bits,the number of rounds(r),the length of the secret key(b)in bytes,and the size of the block(L)in *** main feature of IRC6 is the variable number of working registers instead of just four registers as in RC6,resulting in a variable block size for plaintext and *** IRC6 cipher is designed to improve the robustness against attacks by increasing the diffusion for each round and providing greater security with fewer *** effectiveness of the proposed IRC6 scheme is verified against theoretical *** proposed IRC6 scheme depends on full diffusion and confusion mechanisms regardless of the utilized block *** proposed IRC6 scheme saves 70%of the encryption time and 64%of the decryption time of *** simulation results prove that the IRC6 achieves a better encryption/decryption time compared to the ***,the proposed IRC6 is anticipated to fulfill the market needs and system security requirements.

关键词： Cryptography block cipher RC6,IRC6,AES

Micropunch grafting for healing of refractory chronic venous leg ulcers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Plastic and Reconstructive Surgery 2022年第4期4卷 166-170页

作者： Aya Mohamed Samy Mostafa Abd el-Halim ahmed Hassan el-Sabbagh Department of Plastic and Reconstructive Surgery Mansoura University HospitalMansoura 35516Egypt Plastic Surgery Center Faculty of MedicineMansoura UniversityMansoura 35516Egypt

Background: Chronic venous ulcers are a serious problem for both patients and physicians. The CEAP classification(clinical manifestations(C), etiologic factors(E), anatomic distribution of disease(A), and underlying pathophysiologic findings(P)) for chronic venous disorders(CVD) was developed in 1994. Published papers on CVD use all or part of the CEAP. Micropunch grafts, which are a variation of skin grafts, have been used with great success in plastic surgery for both esthetic and reconstructive purposes. This study aimed to assess the outcomes of micropunch grafting in the treatment of chronic refractory venous ***: Patients with chronic venous ulcers who did not respond to conservative treatment for more than 6months were included in the study. All patients underwent ulcer coverage by micropunch skin grafts using a micrometer. The patients were discharged on the same day as the surgery. Micropunch skin grafts were manually counted per square centimeter intraoperatively and during follow-up using Dermlite DermatoschopeTM II Pro *** satisfaction was assessed by using a ***: Twenty patients underwent the surgery. Most of the patients were middle-aged males. The ulcers were predominantly small-and medium-sized. The mean operation time was 167.00 ± 86.01 min. After 6 months, the survival rate of the planted micrografts was 84%. Three ulcers had graft loss and two patients had an infection at the ulcer site, which was managed conservatively. The patients were followed-up for 14 ***: Micropunch grafting is a useful and convenient method for the treatment of difficult venous ulcers and can be performed on an outpatient basis.

关键词： Venous ulcer Micropunch grafting

Effect of Microalloying Additions on the Microstructure and Mechanical Properties of Low Carbon Steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2011年第S1期18卷 246-251页

作者： EISSA Mamdouh ABD el-Aziz ahmed GHALI Saeed HALFA Hossam SABER Shady Central Metallurgical Research & Development Institute "CMRDI" Faculty of Material Science and Engineering German University in Cairo "GUC"

Low carbon steels are characterized by good weldability,formability and fracture toughness ***,the low strength levels of these steel grades limit their wide *** the other hand,increasing the strength by increasing the carbon content and alloying elements deteriorates the other *** this study,the microalloying technique was used to examine the possibility of attaining low carbon steels with good combination of strength,ductility and impact properties.A low carbon steel microalloyed with single addition of vanadium and another one microalloyed with combined addition of vanadium and titanium were used in this investigation and their properties were compared with non-microalloyed low carbon steel having the same base ***,other two nonmicroalloyed and V-microalloyed steels with higher carbon,silicon and manganese contents were also investigated to reveal the effect of base ***,hardness,room and zero temperature Charpy V-notch impact tests were conducted to evaluate the variations in the mechanical properties of low carbon hot forged steel containing vanadium and combinations of vanadium and *** addition,the microstructures of the different investigated steels were observed using both optical microscope and scanning electron ***,the hardness of the ferrite phase was also determined using micro-hardness *** results showed improvement of the mechanical properties of the investigated steels by both single V-and combined V + ***,hardness and impact tests results indicated that good combinations of strength,ductility and impact properties can be achieved by V-microalloying *** with combination of V and Ti microaddition has much higher hardness,yield strength,ultimate tensile strength and impact energy at both room and zero temperatures compared with non-microalloyed and single Vmicroalloyed *** C,Si and Mn contents result in

关键词： low carbon steels single microalloying combined microalloying strength ductility impact energy grain refinement precipitation strengthening

Determination of gamma ray spectrometry efficiency for the attenuation coefficients of some bismuth borate glasses by MCNP and(ISOCS)techniques

在线全文

学校读者我要写书评

暂无评论

Radiation Detection Technology and Methods 2018年第2期2卷 67-74页

作者： ahmed Y.el-Haseib Z.ahmed Yasser B.Saddeek Radiation Safety Department Egyptian Nuclear and Radiological Regulatory Authority(ENRRA)Nasr CityCairoEgypt Nuclear Safeguards and Physical Protection Department Egyptian Nuclear and Radiological Regulatory Authority(ENRRA)Nasr CityCairoEgypt Physics Department Faculty of ScienceAl-Azhar UniversityAssiut 71524Egypt

Background Radiation detection has been a main interest for researchers as all kind of produced particles in atomic and subatomic physics based on the measurement systems so-called *** efficiency is one of the main parameters in detection system besides many other different parameters of the *** detector in experimental physics is an instrument that converts radiation energy into an electrical signal,and this is achieved basically by either ionization or *** choice for any type of a detector(gas-filled,scintillation or semiconductor)for any application depends upon the X-ray of gamma energy range of interest.A working model is therefore developed which is capable of describing the overall NaI(Tl)detection efficiency as a function of several known *** The attenuation coefficients for the bismuth borate glasses with different concentrations were measured using gamma spectroscopy *** numerical absolute efficiency calibration of a detector can be determined by In-Situ Object Calibration Software(ISOCS)and Monte Carlo Neutral Particle version 5(MCNP5)techniques which does not require any calibration standards or reference *** By using the ISOCS and MCNP5 methodologies,the full energy peak efficiency of a scintillator detector(3“X3”NaI(Tl))exposed to Co-60 and Cs-137 gamma ray sources with average accuracy range 0.126–1.224%for the used samples can be *** used materials are ternary and are located between the detector and the source to determine the attenuation coefficients for these samples by using the calculated full energy peak efficiencies of a *** The average accuracy ranged from−1.808 to 1.960%for linear attenuation coefficient(μ),while it ranged from−1.999 to 1.888%and from−1.924 to 1.960%for half value layer(HVL)and mass linear attenuation coefficient(μm),*** The calculated values of the absolute full energy peak efficiency have been used to determi

关键词： Detection efficiency Sodium iodine(NaI) Linear attenuation coefficient(μ) Mass linear attenuation coefficient(μm) Half-value layer(HVL)

Weight Prediction Using the Hybrid Stacked-LSTM Food Selection Model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Systems Science & Engineering 2023年第7期46卷 765-781页

作者： ahmed M.elshewey Mahmoud Y.Shams Zahraa Tarek Mohamed Megahed el-Sayed M.el-kenawy Mohamed A.el-dosuky Faculty of Computers and Information Computer Science DepartmentSuez UniversitySuezEgypt Faculty of Artificial Intelligence Kafrelsheikh UniversityKafrelsheikh33511Egypt Faculty of Computers and Information Computer Science DepartmentMansoura University35561Egypt Faculty of Physical Education Track and Field Competitions DepartmentArish UniversityEgypt Delta Higher Institute of Engineering and Technology Mansoura35111Egypt Department of Computer Science Arab East CollegesRiyadh13544Saudi Arabia

Food choice motives(i.e.,mood,health,natural content,convenience,sensory appeal,price,familiarities,ethical concerns,and weight control)have an important role in transforming the current food system to ensure the healthiness of people and the sustainability of the *** from several domains have presented several models addressing issues influencing food choice over the ***,a multidisciplinary approach is required to better understand how various aspects interact with one another during the decision-making *** this paper,four Deep Learning(DL)models and one Machine Learning(ML)model are utilized to predict the weight in pounds based on food *** Long Short-Term Memory(LSTM)model,stacked-LSTM model,Conventional Neural Network(CNN)model,and CNN-LSTM model are the used deep learning *** the applied ML model is the K-Nearest Neighbor(KNN)*** efficiency of the proposed model was determined based on the error rate obtained from the experimental *** findings indicated that Mean Absolute Error(MAE)is 0.0087,the Mean Square Error(MSE)is 0.00011,the Median Absolute Error(MedAE)is 0.006,the Root Mean Square Error(RMSE)is 0.011,and the Mean Absolute Percentage Error(MAPE)is ***,the results demonstrated that the stacked LSTM achieved improved results compared with the LSTM,CNN,CNN-LSTM,and KNN regressor.

关键词： Weight prediction machine learning deep learning LSTM CNN KNN

Evaluation of extracts and essential oil from Callistemon viminalis leaves:Antibacterial and antioxidant activities,total phenolic and flavonoid contents

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian Pacific Journal of Tropical Medicine 2013年第10期6卷 785-791页

作者： Mohamed ZM Salem Hayssam M Ali Nader A el-Shanhorey ahmed Abdel-Megeed Forestry and Wood Technology Department Faculty of Agriculture(EL-Shatby)Alexandria University Botany and Microbiology Department College of ScienceKing Saud University Timber Trees Research Department Sabahia Horticulture Research StationHorticulture Research InstituteAgriculture Research Center Department of Botanical Gardens Research Horticultural Research Institute(ARC) Faculty of Agriculture(Saba Basha) Alexandria University

Objective:To investigate antioxidant and antibacterial activities of Callistemon viminalis(***)***:The essential oil of *** leaves obtained by hydrodistillation was analyzed by GC/*** extracts were tested for total phenolic and flavonoid contents and in vitro antioxidant(DPPH assay)and antibacterial(agar disc diffusion and 96-well micro-plates methods)***:Fourteen components were identified in the essential oil,representing 98.94%of the total *** major components were 1,8-cineole(64.53%)andα-pinene(9.69%).Leaf essential oil exhibited the highest antioxidant activity of(88.60±1.51)%comparable to gallic acid,a standard compound[(80.00±2.12)%].Additionally,the biggest zone of inhibitions against the studied bacterial strains was observed by the essential oil when compared to the standard antibiotic(tetracycline).The crude methanol extract and ethyl acetate fraction had a significant antibacterial activity against the tested bacterial ***:It can be suggested that *** is a great potential source of antibacterial and antioxidant compounds useful for new antimicrobial drugs from the natural *** present study revealed that the essential oil as well as the methanol extracts and ethyl acetate fraction of *** leaves exhibited highly significant antibacterial activity against the tested bacterial strains.

关键词： Callistemon viminalis Essential oil Antibacterial activity Antioxidant activity Phenolic content Flavonoid content