检索结果-南通市图书馆

Novel method for measurement of effective cavity length of DBR fiber

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2010年第4期8卷 398-400页

作者：冀青马秀荣孙静张昊姚颖 School of Computer and communication Engineering tianjin university of technology Engineering Research Center of Communication DevicesMinistry of Education tianjin key {2. of {2. electronic and communication devices Tianjin University of Technology Institute of Modern Optics Nankai university

A novel method to measure the effective cavity length of distributed Bragg reflector（DBR） fiber laser with fiber Bragg grating（FBG） Fabry-Perot cavity as the resonator is *** effective cavity length of DBR fiber laser is accurately measured by measuring the frequency spacing of two adjacent longitudinal modes in the cavity without the precise physical length of *** measuring accuracy as high as 10^（-5） mm can be obtained by setting the resolution bandwidth of the spectrum analyzer.

关键词： Fiber Bragg gratings Fiber lasers Fibers Spectrum analyzers

Synthesis of nanostructural ZnO using hydrothermal method for dye-sensitized solar cells

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2010年第4期53卷 1146-1149页

作者： WANG ChunXiao1,2.ZHANG XiaoDan1,WANG DongFeng1,YANG ZhenHua1,2.JI WeiWei1,ZHANG CunShan2.& ZHAO Ying1 1 Institute of Photo-electronic Thin film {2. and technology of Nankai university,key laboratory of Photo-electronic Information Science and technology(Nankai university),Ministry of Education,tianjin 300071,China 2.College of Information Engineering,Hebei university of technology,tianjin 300130,China Institute of Photo-electronic Thin film {2. and technology of Nankai university Key Laboratory of Photo-electronic Information Science and Technology (Nankai University) Ministry of Education College of Information Engineering Hebei University of

ZnO nanocrystals with different morphologies were successful synthesized by a simple hydrothermal method combined with and without hexadecyl trimethyl ammonium bromide(CTAB).The phases and morphologies of the products were measured using X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM),*** results indicated that the ZnO nanocrystals with different morphologies were of hexagonal wurtzite *** nanorods were obtained without using CTAB,and then the morphology of ZnO changed to ZnO nanoflower and the density of nanoflower became denser with the increase of CTAB *** nanoflower and ZnO nanorod as photoanode were applied to dye-sensitized solar cells(DSSC),*** nanoflower shows a higher dye loading,so DSSC with the use of the ZnO nanoflower possesses a higher conversion efficiency than ZnO nanorod.

关键词： DSSC ZnO

THz source based on optical Cherenkov radiation

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2012年第1期55卷 27-34页

作者： YAO JianQuan1,2.LIU PengXiang1,2.XU DeGang1,2.LV YingJin1,2.LV Da1,2.1Institute of Laser&Optoelectronics,College of Precision Instruments and Opto-electronic Engineering,{2. university,{2. 300072.China 2.5} laboratory of Opto-electronics Information technology({2. university),Ministry of Education,{2. 300072.China Institute of Laser & Optoelectronics College of Precision Instruments and Opto-Electronic Engineering Tianjin University key laboratory of Opto-{2.s Information {2. (tianjin university) Ministry of Education

Terahertz(THz)technique has attracted considerable interest due to its broad application *** source is a crucial part of THz science and *** Cherenkov radiation in electro-optic crystals is a promising method of THz generation,because phase-matching is automatically *** this paper,we introduced two types of THz source based on optical Cherenkov radiation:both broadband and tunable *** mechanism of radiation was analyzed and recent development was reviewed in *** future of THz source based on optical Cherenkov radiation was also forecasted.

关键词： Terahertz source optical rectification dierence frequency generation Cherenkov radiation

A new kind of superimposing morphology for enhancing the light scattering in thin film silicon solar cells： Combining random and periodic structure

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2014年第8期23卷 350-356页

作者： Huang Zhen-Hua Institute of Photo-electronics Thin film {2. and Technique of Nankai university Tianjin 300071 China key laboratory of Photo-{2.s Thin {2. devices and Technique of tianjin Tianjin 300071 China key laboratory of Photo-{2. Information Science and {2. of Ministry of Education (Nankai university) Tianjin 300071 China

In this article, a new type of superimposing morphology comprised of a periodic nanostructure and a random structure is proposed for the first time to enhance the light scattering in silicon-based thin film solar cells. According to the framework of the Reyleigh-Sommerfeld diffraction algorithm and the experimental results of random morphologies, we analyze the light-scattering properties of four superimposing morphologies and compare them with the individual morphologies in detail. The results indicate that the superimposing morphology can offer a better light trapping capacity, owing to the coexistence of the random scattering mechanism and the periodic scattering mechanism. Its scattering property will be dominated by the individual nanostructures whose geometrical features play the leading role.

关键词： light scattering superimposing morphology random periodic

First-principles calculations on implanted TiO_2.by 3d transition metal ions

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2009年第6期52卷 838-842页

作者： HOU XingGang1,2. HUANG MeiDong1, WU XiaoLing2.& LIU AnDong2.1 Department of Physics, tianjin Normal university, tianjin 300387, China 2.key laboratory of Beam technology and Material Modification of Ministry of Education, Beijing Normal university, Beijing 100875, China Department of Physics Tianjin Normal University Tianjin China key laboratory of Beam {2. and Material Modification of Ministry of Education Beijing Normal University Beijing China

3d transition metal (V, Cr and Fe) ions are implanted into TiO2.by the method of metal ion implantation. The electronic band structures of TiO2.films doped 3d transition metal ions have been analyzed by ab initio band calculations based on a self-consistent full-potential linearized augmented plane-wave method within the first-principle formalism. Influence of implantation on TiO2.films is examined by the method of UV-visible spectrometry. The results of experiment and calculation show that the optical band gap of TiO2.films is narrowed by ion implantation. The calculation shows that the 3d state of V, Cr and Fe ions plays a significant role in red shift of UV-Vis absorbance spectrum.

关键词： 3d transition metal ions implantation TiO2 FP-LAPW electronic structure

Compact High-performance Bulk Optical Isolator

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Lasers 1998年第2期B7卷 31-36页

作者： WANG Lindou(Department of electronic Engineering,tianjin {2.,tianjin 300072.China) tianjin Univ Tianjin China

ＣｏｍｐａｃｔＨｉｇｈ┐ｐｅｒｆｏｒｍａｎｃｅＢｕｌｋＯｐｔｉｃａｌＩｓｏｌａｔｏｒＷＡＮＧＬｉｎｄｏｕ（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ，ＴｉａｎｊｉｎＵｎｉｖｅｒｓｉｔｙ，Ｔｉａ... 详细信息

ＣｏｍｐａｃｔＨｉｇｈ┐ｐｅｒｆｏｒｍａｎｃｅＢｕｌｋＯｐｔｉｃａｌＩｓｏｌａｔｏｒＷＡＮＧＬｉｎｄｏｕ（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ，ＴｉａｎｊｉｎＵｎｉｖｅｒｓｉｔｙ，Ｔｉａｎｊｉｎ３０００７２，Ｃｈｉｎａ）...

关键词： isolaton fiber optic communication bulk isolator

Control of Pinhole Defects Formation in Semi-flexible Coaxial Cable by Vertical Tin-Plating Process

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of tianjin university 2011年第5期17卷 320-323页

作者：程方杰肖鑫孙贵铮杨立军张凤玉 School of Materials Science and Engineering Tianjin University tianjin key {2. of Advanced Joining {2. tianjin Anxunda Ltd

Holistic tin-plating on the outer conductor is one of the key processes in the manufacture of semi-flexible coaxial cable, which is widely applied to the third generation (3G) mobile communication system. However, in the traditional horizontal tin-plating process, disadvantages such as the pinhole defects and low productivity effect cannot be avoided. In this paper, a vertical tin-plating process was proposed to reduce the pinhole defects and improve the tincoating quality. Compared with the traditional horizontal tin-plating process, the immersion length was reduced from 300-400 mm to 10-100 mm and the tin-plating time was reduced from 7 s to 3 s in the proposed method. The experimental results indicate that immersion length and time are key parameters for the tin-plating quality. With this new tin-plating process, the experimental results show that the pinhole defects can be eliminated effectively by controlling the immersion depth below 100 mm and tin-plating time at 3 s. The thickness of tin-coating increased from not more than 5 μm to 12.3 μm with the proposed vertical tin-plating process. Meanwhile, the thickness of the intermetallic compounds (IMCs) layer between the tin-coating and copper wires was reduced from 3.2. μm to 0.62.μm if the immersion time decreased from 30 s to 1 s. Besides, a self-developed flux, which possesses a boiling point or decomposed temperature of active components over 300℃, exhibits a better efficiency in reducing the pinhole formation.

关键词： 3G communication network semi-flexible coaxial cable vertical tin-plating pinhole defect

Sintering characteristics and microstructure of WC-Co-VC/Cr_3C_2.ultrafine cemented carbides

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2009年第5期28卷 482-486页

作者： LEI Yiwen WU Enxi School of Mechanical and electronic Engineering Tianjin Polytechnic University Tianjin 300160 China State key laboratory of Powder Metallurgy Central South University Changsha 410083 China

The sintering characteristics, microstructure, and mechanical properties of ultrafine WC-12.Co-0.2.VC/0.5%Cr3C2.cemented carbides were investigated. Dilatometric and differential thermal analyses （DTA） indicate that the compacts start to shrink at 600°C, the shrinkage rate peak is at 1190°C, and the liquid formation temperature is lower than the W-C-Co eutectic temperature （1330°C）. Microstructure analysis results show that the cemented carbides with fine and homogeneous microstructure were obtained when sintered at 1430°C. Continuous and discontinuous grain growth was suppressed due to the synergistic action of VC/Cr3C2. The transverse rupture strength （TRS） of the samples reaches 42.6 MPa, with the hardness HRA 92.1. The fine and homogeneous microstructure, alloy strengthening, and different phase constitutions of binder in the cemented carbides result in high hardness and TRS. Continuous and discontinuous grain growth was observed in the cemented carbide sintered at 1450°C, which results in significant decreases of hardness and TRS. It indicates that VC/Cr3C2.additions in the cemented carbides can only suppress the grain growth at a certain temperature.

关键词： cemented carbides sintering characteristic grain growth microstructure mechanical properties

Characterization of plastic flow in two Zr-based bulk metallic glasses

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2006年第4期49卷 414-424页

作者： XING Dongmei1,2. ZHANG Taihua1, LI Weihuo3 & WEI Bingchen3 1. State key laboratory of Nonlinear Mechanics (LNM), Institute of Mechanics, Chinese Academy of Sci- ences, Beijing 100080, China 2. College of Physics and {2. Information Science, {2. Normal university, {2. 300074, China 3. National Microgravity laboratory, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China State key laboratory of Nonlinear Mechanics (LNM) Institute of Mechanics Chinese Academy of Sciences Beijing 100080 China sychology.lu.se

Plastic deformation behaviors of Zr65Al10Ni10Cu15 and Zr52.5Al10Ni10Cu15Be12.5 bulk metallic glasses (BMGs) are studied by using the depth-sensing nanoindentation, microindentation and uniaxial compression. The Be-containing BMG exhibits a signifi- cantly improved overall plastic strain compared with the Be-free alloy during compressive tests. Both BMGs show a loading-rate-dependent serrated flow during nanoindentation measurements, but the Be-containing alloy exhibits a much lower critical loading rate for the disappearance of the serration than the Be-free BMG. The shear band patterns de- veloped during plastic deformation are investigated by microindentation technique, wherein much higher shear band density is found in the Be-containing alloy than in the Be-free alloy, indicating an easier nucleation of shear bands in the former BMG. The dif- ference in the plastic deformation behavior of the two BMGs can be explained by a free volume model.

关键词： Bulk metallic glass, plastic deformation, shear band, nanoindentation.