检索结果-南通市图书馆

Bio-regeneration of p-complexation desulfurization adsorbents

在线全文

学校读者我要写书评

暂无评论

Science china Chemistry 2005年第6期48卷 538-544页

作者： LI Wangliang1,2. XING Jianmin1, XIONG Xiaochao1,2. SHAN Guobin1,2.& LIU Huizhou1 1. Laboratory of Separation Science and Engineering, Institute of Process Engineering, Chinese {3. of sciences, {2. 100080, china 2. Graduate school of the Chinese {3. of sciences,{2. 100039, china 1. Laboratory of Separation Science and Engineering Institute of Process Engineering Chinese Academy of Sciences 100080 Beijing China 2. Graduate school of the Chinese academy of {2. 100039 Beijing China

The coupling of adsorption desulfurization and biodesulfurization is a new approach to produce clean fuels. Sulfur compounds are firstly adsorbed on adsorbents, and then the ad-sorbents are regenerated by microbial conversion. p-Complexation adsorbent, Cu(I)-Y, was ob-tained by ion exchanging Y-type zeolite with Cu2. and then by auto-reduction in helium at 450℃ for 3.h. Dibenzothiophene (DBT) was used as a model compound. The effects of cell concentra-tion, volume of oil phase, the ratio of aqueous phase to adsorbent on DBT desorption by a bac-terium were studied. The amounts of DBT desorbed and 2.HBP produced can be apparently increased with addition of n-octane. BDS activity can be improved by increasing cell concentra-tion and the ratio of water-to-adsorbent. 89% of DBT desorbed from the adsorbents can be converted to 2.HBP within 6 h and almost 100% within 2. h, when the volume ratio of oil-to-water was 1/5 mL/mL, the cell concentration was 60 g·L?1, and the ratio of adsorbent-to-oil was 0.03.g·mL?1. The amount of 2.HBP produced was strongly dependent on the volume ratio of oil-to- water, cell concentration and amount of adsorbent. Adsorption capacity of the regenerated ad-sorbent is 95% that of the fresh one after being desorbed with Pseudomonas delafieldii R-8, washed with n-octane, dried at 100℃ for 2. h and auto-reduced in He.

关键词： adsorption desulfurization p-complexation adsorbents bio-regeneration Pseudomonas delafieldii desorption.

The mathematical model of wetting angle of heterogeneous nucleation

在线全文

学校读者我要写书评

暂无评论

Science china(Technological sciences) 2004年第4期47卷 391-397页

作者： HUANG Cheng1, SONG Bo1, MAO Jinghong2.& ZHAO Pei3.1. school of Metallurgical and Ecological Engineering, University of Science and Technology beijing, beijing 100083. china 2. school of Material Science, University of Science and Technology beijing, beijing 100083. china 3. Central Iron and Steel Research Institute, beijing 100081, china 1. school of Metallurgical and Ecological Engineering University of Science and Technology Beijing 100083 Beijing China 2. school of Material Science University of Science and Technology Beijing 100083 Beijing China 3. Central Iron and Steel Research Institute 100081 Beijing China

The heterogeneous nucleation has been analyzed in terms of the thermodynamic theory, and the mathematical model of wetting angle of heterogeneous nucleation has been developed based on the dynamic requirements of hetero- and homogeneous nucleation. With the wetting angel model, the wetting angles of different catalysts in liquid iron have been calculated. The result shows that the wetting angle of most catalysts is smaller than 40, and the value of f() is far less than 1. The wetting angles of TiN, TiC and RE2.3.are smaller, while the wetting angle of MnO is bigger among the ordinary nucleation catalysts. The wetting angles calculated by this model are in agreement with the results of other research work.

关键词： heterogeneous nucleation, mathematical model, wetting angle, undercooling.

Simulation of aerodynamic performance affected by vortex generators on blunt trailing-edge airfoils

在线全文

学校读者我要写书评

暂无评论

Science china(Technological sciences) 2010年第1期53卷 1-7页

作者： YANG Ke1,2.ZHANG Lei1,3.& XU JianZhong1,2.1 Institute of Engineering Thermophysics,Chinese academy of {3.,{2. 100190,china 2.Key Laboratory of Wind Energy Utilization,Chinese academy of {3.,{2. 100190,china 3.Graduate school of Chinese academy of {3.,{2. 100190,china 1. Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing 100190 China2. Key Laboratory of Wind Energy Utilization Chinese Academy of Sciences Beijing 100190 China3. Graduate School of Chinese Academy of Sciences Beijing 100190 China

An investigation was carried out by numerical simulation on a wind turbine airfoil and a blunt trailing-edge airfoil with and without vortex generators (VGs), and the performance of the airfoils was analyzed. By the simulation of airfoil DU 91-W2.2.0 it was verified that the numerical method and model were credible. Based on this airfoil, a new one with a blunt trailing edge of 6% chord was blended by symmetrically adding thickness, and its characteristics curves were obtained through computing at key angles of attack. Additionally, the pressure distribution on blended airfoil was analyzed by comparing to the airfoil without blend. The interaction of streamwise vortices induced by VGs with trailing vortex or separation vortex was considered, followed by the uncovery of how VGs can suppress the boundary layer separation.

关键词： vortex generators airfoil blunt trailing-edge

Experimental and discrete element numerical analysis of side slope instability induced by fissure water underlying impervious bed

在线全文

学校读者我要写书评

暂无评论

Science china(Technological sciences) 2005年第z1期48卷 65-80页

作者： LIU Bingshan1, LI Shihai1, ZHANG Lei1,2.& WANG Jianguo3.. Institute of Mechanics, Chinese academy of sciences, {2. 100080, china 2. Graduate school, Chinese academy of sciences, {2. 100060, china 3. Tropical Marine Science Institute, National University of Singapore, 10 Kent Ridge Crescent, Singapore 1192.0 Chinese Acad Sci Inst Mech Beijing 100080 Peoples R China Chinese Acad Sci Grad Sch Beijing 100060 Peoples R China Natl Univ Singapore Trop Marine Sci Inst Singapore 119260 Singapore

When the sliding mass contains impervious bed, rainfall can infiltrate into mountain via crevices and form higher artesian aquifer at impervious bed inferior. This will decrease slip resistance and increase sliding forces of the sliding mass, thus lowering the safety factor, and inducing landslide disasters. In this paper, a landslide experimental apparatus is designed for experimental studies on the mechanism of this type of landslides. Meanwhile, the non-dimensional parameters in the model experiment are taken into account using dimensional analysis. The experimental results show that (1) the ratio of the cleft water pressure to the overlying pressure is a crucial parameter affecting the stability of the slope; (2. when the shut-in pressure reaches 80% of the normal component of the pressure on the slip surface made up of rock and soil, landslide will occur; (3. the whole slope will start to slide when the shut-in pressure is equal to the normal component of the pressure formed by the overlying rock and soil on the upper 3.% area. In this article, a discrete element method simulation is used to investigate the influence of cleft water pressure and shearing strength on the landslide stability. It can be concluded that the critical value of Ccr, ?cr, which determines the slide mass stability, increases with the increase of the water pressure; if the water pressure reaches a high level, the stability of the slide mass depends mainly on C, while the influence of ? becomes smaller than C.

关键词： impervious bed, rainfall infiltration, pore water pressure, landslide experiment, displacement monitor, discrete element method.

The deep thermal characteristic of continental margin of the northern South china Sea

在线全文

学校读者我要写书评

暂无评论

Chinese Science Bulletin 2000年第18期45卷 1717-1722页

作者： ZHANG Jian & WANG Jiyang1. Graduate school, University of Science and Technology of china, Chinese {2. of {3., beijing 100039, china 2. Institute of Geology, Chinese {2. of {3., beijing 10002., china Graduate school University of Science and Technology of China Chinese Academy of Sciences Beijing China Institute of Geology Chinese Academy of Sciences Beijing China

Heat flow plays an important role in the study ot thermal structure and thermal evolutionof continental margin of the northern South china Sea. The analysis of heat flow value shows that margin heat flow in the northern South china Sea is relatively high setting, but the percentage of crustal heat flow is lower than 3.% in terrestrial heat flow. The terrestrial heat flow exhibited a current of rise from the Northern Continental Margin to the Southern Central Basin. However, the proportion of crustal heat flow in terrestrial heat flow slowly dropped down in the same direction. It is suggested that the main factor causing high heat flow setting is the moving up of hot material from asthenosphere.

关键词： margin of northern South china Sea terrestrial heat flow thermal structures.

Conceptual design,data model and key techniques of“3. Assistant”

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2011年第S3期21卷 692-698页

作者： LI Qing-yuan1, ZHANG Xuan2. JIN Yang2. ZHOU Hui3. WANG Qian-jin3.WEI Zhan-yin1 1. Key Laboratory of Geo-Informatics, Chinese academy of Surveying and Mapping, {3. 10083.,{2. 2. school of Geo-Science and Surveying Engineering,{2. University of Mining and Technology, {3. 100083.{2. 3. school of Geomatics, Liaoning Technical University, Fuxin 12.000,{2. [a] Key Laboratory of Geo-Informatics Chinese Academy of Surveying and Mapping Beijing 100830 China [b] school of Geo-Science and Surveying Engineering China University of Mining and Technology Beijing 100083 China [c] school of Geomatics Liaoning Technical University Fuxin 123000 China

Conceptual design, data model and key techniques of "Geo-engineer 3. assistant", an underground 3. GIS oriented to geology and mine application, were discussed. In particular, the importance of high-order smoothing triangular pieces to surface's fine expression in geological modeling was emphasized. The contour mode is the most favorite mode of the three modes about surface expression: DEM, TIN and contour. Topology in underground 3. modeling with CAGD was compared. From the view of boundary and coboundary, which is soul of IS 19107 (Geographic information spatial schema), 3. underground topology was re-examined.

关键词： 3. assistant true 3. GIS fine expression of surface contour mode 3. topology

The crustal structure under Sanjiang and its dynamic implications:Revealed by seismic reflection/refraction profile between Zhefang and Binchuan,Yunnan

在线全文

学校读者我要写书评

暂无评论

Science china Earth sciences 2005年第9期48卷 1329-1336页

作者： ZHANG Zhongjie1, BAI Zhiming1, WANG Chunyong2. TENG Jiwen1, Lü Qingtian3. LI Jiliang1, LIU Yifeng1 & LIU Zhenkuan4 1. Institute of Geology and Geophysics, Chinese academy of sciences, {2. 10002., china 2. Institute of Geophysics, china Seismological Bureau, {2. 100085, china 3. Institute of Deposition Resource, Chinese academy of Geosciences, {2. 10003., china 4. school of Exploration and Information, china University of Geosciences, {2. 100083. china 1. Institute of Geology and Geophysics Chinese Academy of Sciences 100029 Beijing China 2. Institute of Geophysics China Seismological Bureau 100085 Beijing China 3. Institute of Deposition Resource Chinese Academy of Geosciences 100037 Beijing China 4. school of Exploration and Information China University of Geosciences 100083 Beijing China

The fault belts in Sanjiang mainly include Jinshajiang-Honghe fault, Lancangjiang fault and Nujiang fault (called Sanjiang faults) in western Yunnan Province, china. By interpreting the wide-angle seismic reflection/refraction profile between Zhefang and Binchuan, which crosses Tengchong and Baoshan blocks in Dianxi (western Yunnan) tectonic zone, we recon- struct the crustal structure with seismic traveltime tomography for crustal P-wave velocity and the seismic scattering image for crustal seismic reflection structure. In this paper, we firstly present the crustal structure images of P-wave velocity and seismic reflection under the wide-angle seismic profile. These results demonstrate that, the crustal velocity structure and seismic reflec- tion structure along the profile can be divided into 3.segments, and there is an obvious difference of crustal structure among the eastern, the western and the middle segment. Generally, crustal P-wave velocities in the Baoshan segment are 0.1―0.2.km/s slower and seismic reflection am- plitudes from Moho discontinuity are stronger than the other 2.segments. In the studied area, crustal thickness is about 40 km, and shows the thickening tendency from west to east along the profile. Additionally, it can be seen that there is one strong-amplitude seismic reflection event as bright points at the depths of 8―10 km, along the segment of 80―115 km of the profile (south- ward of Tengchong); and seismic reflection wave-field from Moho discontinuity varies obviously along the lateral direction. Finally, we make some discussions on the crustal thickening pattern in the Sanjiang fault belt, structural environment of earthquake development and the contact rela- tionship between the Tengchong block, Banshan block and Luxi trough.

关键词： Sanjiang area wide-angle seismic profile crustal structure.

Status of study on biological and toxicological effects of nanoscale materials

在线全文

学校读者我要写书评

暂无评论

Science china Chemistry 2005年第5期48卷 385-394页

作者： WANG Bing1, FENG Weiyue1, ZHAO Yuliang1, XING Gengmei1, CHAI Zhifang1, WANG Haifang2.& JIA Guang3.1. Laboratory for Bio-Environmental Health sciences of Nanoscale Materials (Nanosafety Lab), Institute of High Energy Physics, Chi-nese academy of sciences, beijing 100049, china 2. College of Chemistry and Molecular Engineering, Peking University, beijing 100871, china 3. Department of Occupational and Environmental Health sciences, school of Public Health, Peking University, beijing 100083. china 1. Laboratory for Bio-Environmental Health sciences of Nanoscale Materials (Nanosafety Lab) Institute of High Energy Physics Chinese Academy of Sciences 100049 Beijing China 2. College of Chemistry and Molecular Engineering Peking University 100871 Beijing China 3. Department of Occupational and Environmental Health sciences School of Public Health Peking University 100083 Beijing China

Because the physical and chemical properties of nanosized materials mostly differ from the existing microsized materials, their potential impacts on human health and the envi-ronment will be topics under the serious discussions in press and in a number of international scientific journals. We analyze and summarize the existing data of the experimental study on the biological activities and adverse effects of nanoscale materials/particles including single wall carbon nanotubes, multi wall carbon nanotubes, titanium oxide and iron powders. Though some biological behaviors of nanoscale materials observed cannot be understood on the basis of the current knowledge, as the existing data are mostly preliminary, it is too early to make some ex-clusive conclusions on biological activities (or the toxicity) of any of nanoscale materials. The experimental techniques, the current topics, and the future research directions for this new re-search field are also discussed.

关键词： nanomaterials, single wall carbon nanotubes, multi wall carbon nanotubes, titanium oxide and iron, biological activity and toxicological effect.

De-interlacing technique based on total variation with spatial-temporal smoothness constraint

在线全文

学校读者我要写书评

暂无评论

Science in china(Series F) 2007年第4期50卷 561-575页

作者： YIN XueMin1,2.3. YUAN JianHua1,2. LU XiaoPeng1,2.& ZOU MouYan1,2.1 Institute of Electronics, Chinese academy of sciences, {2. 100080, china 2.Graduate school, Chinese academy of sciences, beijing 100039, china 3.Jiuquan Satellite Launch Center, Lanzhou 73.0}50, china 1. Institute of Electronics Chinese Academy of Sciences Beijing 100080 China 2. Graduate school Chinese Academy of Sciences Beijing 100039 China 3. Jiuquan Satellite Launch Center Lanzhou 732750 China

This paper introduces a new method of converting interlaced video to a progressively scanned video and image, The new method is derived from Bayesian framework with the spatial-temporal smoothness constraint and the MAP is done by minimizing the energy functional, The half-quadratic regularization method is used to solve the corresponding partial differential equations （PDEs）, This approach gives the improved results over the conventional de-interlacing methods, Two criteria are proposed in the paper, and they can be used to evaluate the performance of the de-interlacing algorithms,

关键词： video processing de-interlacing total variation spatio-temporai smoothness constraint PDEs half-quadratic regularization