Modelling of Mould Filling and Solidification of Castings

作     者：Xu Zhian 

作者机构：WTCM Foundry Centre Technologiepark 9 9052 Zwijnaarde BELGIUM 

出 版 物：《材料科学与工程学报》 (Journal of Materials Science and Engineering)

年 卷 期：2000年第20卷第Z2期

页      面：904-910页

核心收录：

学科分类：08[工学] 0805[工学-材料科学与工程（可授工学、理学学位）] 080502[工学-材料学] 

主　　题：Mould filling Solidification Casting Simulation 

摘      要：An experimental casting for validation has been designed. The casting is composed of two 50×600×2.5 (width×length×thick) thin-wall pieces. One downsprue is located in the middle. A pouring cup with a stopper is used. This design allows to using two different types of moulds simultaneously. An Al-10%Si alloy has been poured at different temperatures. Two effects have been studied: one is the pouring temperature and the other is the moulding method (namely by machine or manually). The filling length is proportional to the pouring temperature. The influence of different moulding methods on mould filling is more complicated. The filling length in the manual-made mould is 1.5 times as long as the one in the machine-made mould due to the different thermal conductivities. Vents have little influence. A finite volume based computer code which can simulate fluid flow during mould filling coupled with heat transfer as well as solidification has been developed in WTCM Foundry Center.. The code can predict cold shut during mould filling and shrinkage defects during solidification. The simulated results are in good agreement with the *** the second part of the paper, an example is given which illustrates how to use computer simulation to aid designing the casting system. The final computational result is compared with the industrial casting. The process of designing castings by using simulation is completely different from the traditional way. The computer aided casting design offers the possibility to obtain a sound casting from the first time.