检索结果-南通市图书馆

Modulation of phase boundary and domain structures to engineer strain properties in BNT-based ferroelectrics

Journal of Advanced Ceramics 2024年第7期13卷 967-975页

作者： Yule Yang Zhiyong Liu Pengrong Ren Yuqing Mao Haijun Sun Bingliang Liang Pu Mao Kun Guo Bing Xie Longlong Shu school of Materials Science and engineering Nanchang Hangkong UniversityNanchang 330063China school of Materials Science and engineering Xi'an University of TechnologyXi’an 710048China school of Aircraft engineering Nanchang Hangkong UniversityNanchang 330063China school of Physics and Materials Science Nanchang UniversityNanchang 330031China

Bismuth sodium titanate(BNT)ceramics exhibit outstanding strain responses but are unfavorable for application in high-sensitivity displacement actuators due to the large negative strain resulting from irreversible changes in their phase transition and domain ***,(1−x)Bi_(0.50)Na_(0.41)K_(0.09)TiO_(3)-xNaNbO_(3)(BNKT−xNN)solid solutions were prepared to improve the strain properties through the strategy of modulating the phase boundary and domain *** introduction of sodium niobate could effectively regulate the relative content of the tetragonal(P4bm)and rhombohedral(R3c)phases in the phase boundary *** ferroelectric-to-relaxor phase transition(TF−R)was reduced,and the ergodic relaxor(ER)state was nurtured at room *** zero-negative strain properties of S=0.41%and d33*=742 pm/V were achieved from the reversible transition between the ER and ferroelectric states under an applied electric field(x=0.04).Additionally,understanding the domain states via piezoelectric force microscopy(PFM)and firstorder reversal curve(FORC)revealed that the superior strain responses originated from the reversible inter-transformation of substable macrodomains and polar nanoregions(PNRs)in the phase *** study provides new insight into the interplay between the evolution of phase boundaries and domain structures and the strain properties of BNT-based ceramics.

关键词： bismuth sodium titanate(BNT) domain structure phase boundary strain response relaxor state

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computation of the exact time delay margin for vehicle platoon under generic communication topologies

引用

Journal of Traffic and Transportation engineering(English Edition) 2024年第4期11卷 761-775页

作者： Xu Zhu Maode Yan Panpan Yang Yongtao Liu school of Electronic and Control engineering Chang'an University school of Automobile Chang'an University

Due to the limited bandwidth and transmission congestion of the vehicle platoon's communication, it is inevitable to induce time delay, which significantly degrades the control performance of the vehicle platoon, even resulting in instability. This paper focuses on analyzing the internal stability under generic communication topologies and presents a method of computing the exact time delay margin(ETDM). The proposed method can offer a necessary and sufficient internal stability condition with no conservatism. Firstly, to reduce the analytical complexity and computational burden elegantly, we decompose the closed-loop platoon dynamics into a set of individual subsystems via similarity transformation and matrix factorization. This decomposition approach is applicable for any general communication topology. Secondly, an explicit formula is deduced to compute the ETDM by surveying the characteristic roots' distribution of all these individual *** is further demonstrated that only the positive purely imaginary roots need to be considered to compute the ETDM. Finally, simulations are conducted to demonstrate the effectiveness of the theoretical claims.

关键词： Vehicle platoon Exact time delay margin Generic communication topologies System decomposition Characteristic roots' distribution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of Structural and Civil engineering 2024年第7期18卷 977-997页

作者： M.P.SALAIMANIMAGUDAM J.JAYAPRAKASH Department of Structural and Geotechnical engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ferroelectric-controlled graphene plasmonic surfaces for all-optical neuromorphic vision

引用

Science China(Technological Sciences) 2024年第3期67卷 765-773页

作者： CHEN JianBo LIU Yu LI ShangDong LIN Lin LI YaDong HUANG Wen GUO JunXiong school of Electronic Information and Electrical engineering Institute for Advanced StudyChengdu UniversityChengdu 610106China school of Integrated Circuits Tsinghua UniversityBeijing 100084China school of Integrated Circuits(National Exemplary schoolof Microelectronics) Universityof Electronic Science and Technologyof China Chengdu 610054China Jincheng Research Institute of Opto-mechatronics Industry Jincheng 048000China Shanxi Key Laboratory of Advanced Semiconductor Optoelectronic Devices and Integrated Systems Jincheng 048000China engineering Research Center of Digital Imaging and Display Ministry of EducationSoochow UniversitySuzhou 215006China

Artificial visual systems can recognize desired objects and information from complex environments, and are therefore highly desired for pattern recognition, object detection, and imaging applications. However, state-of-the-art artificial visual systems with high recognition performances that typically consist of electronic devices face the challenges of requiring huge storage space and high power consumption owing to redundant data. Here, we report a terahertz(THz) frequency-selective surface using a graphene split-ring resonator driven by ferroelectric polarization for efficient visual system applications. The downward polarization of the ferroelectric material offers an ultrahigh electrostatic field for doping p-type graphene with an anticipated Fermi level. By optimizing the geometric parameters of the devices and modulating the carrier behaviors of graphene, our plasmonic devices exhibit a tunable spectral response in a range of 1.7–6.0 THz with continuous transmission values. The alloptical neural network using graphene plasmonic surfaces designed in this study exhibited excellent performance in visual preprocessing and convolutional filtering and achieved an ultrahigh recognition accuracy of up to 99.3% in training the Modified National Institute of Standards and Technology(MNIST) handwritten digit dataset. These features demonstrate the great potential of graphene plasmonic devices for future smart artificial vision systems.

关键词： graphene plasmon ferroelectric frequency selective surface artificial vision system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Leakage and diffusion characteristics of underground hydrogen pipeline

引用

Petroleum 2024年第2期10卷 319-325页

作者： Wenkang Zhang Guanghui Zhao school of Mechatronic engineering Southwest Petroleum University

Soil corrosion and hydrogen embrittlement are the main factors of hydrogen pipeline failure. The gas escapes, diffuses and accumulates in the soil and enters the atmosphere when leak occurs. The mechanism of gas diffusion in buried pipelines is very complicated. Mastering the evolution law of hydrogen leakage diffusion is conducive to quickly locating the leakage point and reducing the loss. The leakage model of the underground hydrogen pipeline is established in this paper. The effect of leakage hole, soil type, pipeline pressure, pipeline diameter on hydrogen leakage diffusion were investigated. The results show that when the hydrogen pipeline leaks, the hydrogen concentration increases with the increase of leakage time, showing a symmetrical distribution trend. With the pipeline pressure increase, hydrogen leakage speed is accelerated, and longitudinal diffusion gradually becomes the dominant direction. As the leakage diameter increases, hydrogen leakage per unit of time increases sharply. Hydrogen diffuses more easily in sandy soil, and its diffusion speed, concentration, and range are higher than that in clay soil. The research content provides a reference and basis for the detection and evaluation of buried hydrogen pipeline leakage.

关键词： Buried pipeline Hydrogen leakage Diffusion characteristics Numerical simulation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO_(2)/N_(2) and CH_(4)/N_(2) separation

引用

Chinese Journal of Chemical engineering 2024年第3期67卷 282-297页

作者： Siang Chen Wenling Wu Zhaoyang Niu Deqi Kong Wenbin Li Zhongli Tang Donghui Zhang The Research Center of Chemical engineering School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China

Flue gas and coal bed methane are two important sources of greenhouse *** swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is *** this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 *** experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric *** the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular ***,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) *** study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.

关键词： Activated carbon Carbon molecular sieve Adsorbent evaluation Adsorption equilibrium and kinetics Heat of adsorption Selectivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An efficient approach for the treatment of radioactive waste perfluoropolyether lubricants via a synergistic effect of thermal catalysis and immobilization

引用

Journal of Environmental Sciences 2024年第2期136卷 512-522页

作者： Xinhang Du Wenhua Tong Xinyu Zhou Jia Luo Yuqiu Liu Yabo Wang Panyu Li Yongkui Zhang Department of Pharmaceutical&Biological engineering School of Chemical EngineeringSichuan UniversityChengdu 610065China

Perfluoropolyether(PFPE)lubricants are a kind of high-molecular polymer with many excellent ***,the use of PFPEs in the nuclear industry can lead to partial decomposition and carrying radionuclides,resulting in a large amount of radioactive waste PFPE lubricants ***,radioactive waste PFPE lubricants are difficult to be effectively treated due to their high stability,the risk of possible leakage of radionuclides,and hypertoxic fluorine-containing *** this study,without any precedent,a strategy of Mn O_(2)-catalyzed decomposition and Na_(2)CO_(3)-immobilized conversion was proposed for PFPE lubricant decomposition and fluorine immobilization simultaneously based on the Lewis acid-base and oxygen vacancies concept.A high fluorine conversion efficiency of 95.4%was ***,the mechanism of decomposition suggested that Mn O_(2)mainly provided Lewis acid sites and attacked the(basic)fluorine or oxygen atoms in PFPE *** decomposition of PFPE chains was proceed down and volatile fluorine-containing gas was released by partial electron transfer,intramolecular disproportionation reaction,and unzipping ***,gas by-products could be further oxidized and then immobilized into fluoride salts by carbonate solid ***,this study provides a simple,safe,and potentially practical strategy for the harmless conversion of refractory fluorinated organic wastes,especially perfluoropolymers.

关键词： Perfluoropolyether lubricants Catalyzed decomposition Fluorine-containing gas Immobilized conversion Fluoride

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Self-templating synthesis of biomass-based porous carbon nanotubes for energy storage and catalytic degradation applications

引用

Green Energy & Environment 2024年第3期9卷 584-595页

作者： Manman Xu Shiqi Fu Yukai Wen Wei Li Qiongfang Zhuo Haida Zhu Zhikeng Zheng Yuwen Chen Anqi Wang Kai Yan Research Centre for Eco-Environmental engineering School of Environment and Civil EngineeringDongguan University of TechnologyDongguan523808China school of Environmental Science and engineering Sun Yat-sen UniversityGuangzhou510275China

Dwindling energy sources and a worsening environment are huge global problems,and biomass wastes are an under-exploited source of material for both energy and material ***,self-template decoction dregs of Ganoderma lucidum-derived porous carbon nanotubes(ST-DDLGCs)were synthesized via a facile and scalable strategy in response to these ***-DDLGCs exhibited a large surface area(1731.51 m^(2)g^(-1))and high pore volume(0.76 cm^(3)g^(-1)),due to the interlacing tubular structures of precursors and extra-hierarchical porous structures on tube *** the ST-DDLGC/PMS system,the degradation efficiency of capecitabine(CAP)reached~97.3%within 120 ***,ST-DDLGCs displayed high catalytic activity over a wide pH range of 3–9,and strong anti-interference to these typical and ubiquitous anions in wastewater and natural water bodies(i.e.,H_(2)PO_(4)^(-),NO_(3)^(-),Cl^(-) and HCO_(3)^(-)),in which a ^(1)O_(2)-dominated oxidation was identified and non-radical mechanisms were ***,ST-DDLGC-based coin-type symmetrical supercapacitors exhibited outstanding electrochemical performance,with specific capacitances of up to 328.1 F g^(-1)at 0.5 A g^(-1),and cycling stability of up to 98.6%after 10,000 cycles at a current density of 2 A g^(-1).The superior properties of ST-DDLGCs could be attributed to the unique porous tubular structure,which facilitated mass transfer and presented numerous active *** results highlight ST-DDLGCs as a potential candidate for constructing inexpensive and advanced environmentally functional materials and energy storage devices.

关键词： Ganoderma lucidum residue Porous carbon nanotubes Self-template method Wastewater treatment Supercapacitor electrode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Growth,optical dispersion and magnetic behavior of Dy^(3+) doped yttrium iron garnet crystals

引用

Journal of Rare Earths 2024年第6期42卷 1110-1117,I0004页

作者： Yating Fang Hui Shen Yudie Ma Shijie Liao Shuang Xia Tian Tian Ding Zhou Yunfeng Ma Jiayue Xu Institute of Crystal Growth School of Materials Science and EngineeringShanghai Institute of Technology National engineering Center of Electromagnetic Radiation Control Materials School of Electronic Science and EngineeringUniversity of Electronic Science and Technology of China

Y_(3)Fe_(5)O_(12)(YIG)crystals are highly desirable for the fabrication of mid-infrared isolators with the rapid growth of optical communications,although it is rather challenging to grow large size and high-quality single ***^(3+)doping is expected to improve the optical and magneto-optical prope ***,high quality Dy:YIG crystals and the adjustment of Dy^(3+)on the structure and optical behavior of YIG crystal remain unclear,impeding its practical ***,a series of Y_(3-x)Dy_(x)Fe_(5)O_(12)(x=0,0.5,1.0,1.5,3)solid solution crystals was grown by the flux-Bridgman method and single crystals up to 25 mm were *** the introduction of Dy^(3+),lattice parameters are gradually enlarged from 1.2379 nm(YIG)to 1.2420 nm(DyIG).Typical Dy^(3+)absorption peaks are observed around 1070,1265 and 1670 *** refractive index decreases from 2.37(500 nm)to 2.10(2500 nm)for YIG crystal,and it reduces from 2.47(500 nm)to 2.16(2500 nm)for DyIG *** optical bandgaps remain almost unchanged for Dy:YIG *** optical dispersion of the refractive indices was finely fitted by the Wemple and DiDomenico(WDD)and the Sellmeier models,*** the increase of Dy^(3+)content,the saturation magnetization(Ms)decreases significantly from 23.62 emu/g(YIG)to 5.33 emu/g(DyIG).Small coercive field is persisted for this system,endowing small external magnetic *** results provide valuable references for the manipulation of rare earths on the properties of magnetooptical crystals,which is beneficial to the design of high-performance garnet crystals for the application of optical switching and non-reciprocal related devices.

关键词： Magneto-optical crystal Yttrium iron garnet Dy^(3+)doping Crystal growth Optical dispersion Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preface for Feature Topic on Human Driver Behaviours for Intelligent Vehicles

引用

Automotive Innovation 2024年第1期7卷 1-3页

作者： Dongpu Cao Argyrios Zolotas Meng Wang Mohammad Pirani Wenbo Li school of Vehicle and Mobility Tsinghua University30 Shuangqing Rd.Beijing 100084China school of Aerospace Cranfield UniversityCranfieldUK Friedrich List Faculty of Transport and Traffic Sciences Technische Universität DresdenDresdenGermany Department of Mechanical and mechatronics engineering University of WaterlooWaterlooCanada

1 Introduction With the advancement of sensing,machine learning,and computing systems,automated driving applications have been growing rapidly *** with the devel-opment of communication technologies such as dedicated short-range communication,extensively emerging intelli-gent vehicles have been developed to connect with vehicles,pedestrians,infrastructures,and clouds in the transportation ***,intelligent vehicles have become intelligent mobile terminal that carries rich functions and services.

关键词： Driver Together driving

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：