检索结果-南通市图书馆

Effects of longitudinal magnetic field on primary dendrite spacing and segregation of directionally solidified single crystal superalloy

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第1期34卷 26-36页

作者： Congjiang Zhang Yilin Zhou Chen Shen Weili Ren Xiaotan Yuan Biao Ding Haibiao Lu Zuosheng Lei Yunbo Zhong Ang Zhang State Key Laboratory of advanced Special Steel College of Materials Science and Engineering Shanghai University National Engineering Research center for Magnesium Alloys Natural Key Laboratory of Advanced Casting Technologies College of Materials Science and EngineeringChongqing University

The primary dendrite spacing(PDS) and segregation of directionally solidified single crystal(SC) superalloy under the longitudinal magnetic field(LMF) were investigated based on the analysis of the whole cross-sectional microstructure at different solidification distances. The results show that the PDS under the LMF remains basically unchanged at different solidification distances, and it is greater than that under no LMF. With the increase of magnetic field intensity, the PDS increases and the macrosegregation decreases. The increasing PDS and reducing segregation under the LMF can be attributed to the increase of solute boundary layer, which expands the non-equilibrium freezing temperature range and brings the effective partition coefficient closer to 1. The increase of the solute enrichment layer thickness could be caused by the downward secondary circulation generated by the thermoelectric magnetic convection(TEMC) near the interface, which drives the migration of solutes towards the interdendritic region. This work not only clarifies the mechanism of LMF controlling PDS and reducing segregation by TEMC, but also provides theoretical guidance for producing high-quality SC superalloys using magnetic fields.

关键词： Primary dendrite spacing Segregation Single crystal superalloy Directional solidification Magnetic field Thermoelectric magnetic convection

Design and tailoring of patterned ZnO nanostructures for perovskite light absorption modulation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 855-861页

作者： Haonan Si Xuan Zhao Qingliang Liao Yue Zhang Academy for advanced Interdisciplinary Science and Technology Beijing Advanced Innovation Center for Materials Genome EngineeringUniversity of Science and Technology BeijingBeijing 100083China Key Laboratory of advanced Materials and Devices for Post-Moore Chips Ministry of EducationBeijing Key Laboratory for Advanced Energy Materials and TechnologiesSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China

Lithography is a pivotal micro/nanomanufacturing technique,facilitating performance enhancements in an extensive array of devices,encompassing sensors,transistors,and photovoltaic *** key to creating highly precise,multiscale-distributed patterned structures is the precise control of the lithography ***,high-quality patterned ZnO nanostructures are constructed by systematically tuning the exposure and development times during *** optimizing these parameters,ZnO nanorod arrays with line/hole arrangements are successfully *** ZnO nanostructures with highly controllable morphology and structure possess discrete three-dimensional space structure,enlarged surface area,and improved light capture ability,which achieve highly efficient energy conversion in perovskite solar *** lithography process management for these patterned ZnO nanostructures provides important guidance for the design and construction of complex nanostructures and devices with excellent performance.

关键词： lithography patterned ZnO nanorod arrays light absorption perovskite solar cell

Phase-field simulation of precipitation kinetics and creep properties of Ni-Al-Cr/Ta superalloys

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第4期67卷 1139-1150页

作者： YANG ShuaiGe ZHANG Zan ZHUO JiCheng LONG HongLi LI YongSheng National Key Laboratory of advanced Casting technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China

The precipitation kinetics ofγ'-Ni_(3)(Al,Ta)phase and creep properties of Ni-15Al-x Ta at.%superalloys are investigated by the crystal plasticity phase-field *** results show that the high Ta content brings a lower creep strain for the deceleration and steady creep stage,while the creep lifetime is *** large external strain intensifies the creep damage and shortens the creep life of Ni-15Al-3Ta at.%*** kinetics evolution and elements distribution are revealed in the quaternary Ni-10Al-8.5Cr-xT a(x=1.5 at.%,2.0 at.%,2.5 at.%)superalloys by the multi-component phase-field *** anti-phase boundary(APB)changes the coarsening mechanism ofγ'phase,and Ta promotes the precipitation ofγ'phase with an increasing volume fraction and particle *** composition difference betweenγ'andγphases increases with the rising of Ta content,the strong partitioning of Ta toγ'phase strengthens the partitioning of Ni and Cr toγmatrix,and Ta shows a superiority than Al in the lattice site occupation of L1_(2)-Ni_(3)(Al,X)*** an importantγ'phase forming element,the optimization of Ta content is essential for improving the mechanical properties of Ni-based superalloys.

关键词： Ni-Al-Ta alloys creep properties kinetics phase-field

同方期刊数据库

A high-sensitive and self-selective humanoid mechanoreceptor for spatiotemporal tactile stimuli cognition

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4400-4409页

作者： Shuxin Bi Xuan Zhao Fangfang Gao Xiaochen Xun Bin Zhao Liangxu Xu Tian Ouyang Qingliang Liao Yue Zhang Academy for advanced Interdisciplinary Science and Technology Beijing Advanced Innovation Center for Materials Genome EngineeringUniversity of Science and Technology(Beijing)Beijing 100083China Key Laboratory of advanced Materials and Devices for Post-Moore Chips Ministry of EducationBeijing Key Laboratory for Advanced Energy Materials and TechnologiesSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China

The cognition of spatiotemporal tactile stimuli,including fine spatial stimuli and static/dynamic temporal stimuli,is paramount for intelligent robots to feel their surroundings and complete manipulation ***,current tactile sensors have restrictions on simultaneously demonstrating high sensitivity and performing selective responses to static/dynamic stimuli,making it a challenge to effectively cognize spatiotemporal tactile ***,we report a high-sensitive and self-selective humanoid mechanoreceptor(HMR)that can precisely respond to spatiotemporal tactile *** HMR with PDMS/chitosan@CNTs(PDMS:polydimethylsiloxane;CNT:carbon nanotube)graded microstructures and polyurethane hierarchical porous spacer exhibits high sensitivity of 3790.8 kPa^(-1).The HMR demonstrates self-selective responses to static and dynamic stimuli with mono signal through the hybrid of piezoresistive and triboelectric ***,it can respond to spatiotemporal tactile stimuli and generate distinguishable and multi-type characteristic *** the assistance of the convolutional neural network,multiple target objects can be easily identified with a high accuracy of 99.1%.This work shows great potential in object precise identification and dexterous manipulation,which is the basis of intelligent robots and natural human-machine interactions.

关键词： mechanoreceptors self-selective high-sensitive spatiotemporal tactile stimuli cognition sensors

Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400℃

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 71-82页

作者： Xiang Su Yuan Lei Yang Chen Hongjie Qu Zhixiang Qi Gong Zheng Xu Liu Henggao Xiang Guang Chen National Key Laboratory of advanced Casting technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China School of Aviation and Mechanical Engineering Changzhou Institute of TechnologyChangzhou 213032China

Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy ***,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening ***,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum *** enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one *** significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T *** thermostable T phase effectively strengthens the matrix by in-hibiting dislocation ***,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high *** finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.

关键词： Aluminum alloys Precipitation Thermally reinforcement phase Re-aging treatment High-temperature strength

Design of low-alloying and high-performance solid solution-strengthened copper alloys with element substitution for sustainable development

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 826-832页

作者： Jiaqiang Li Hongtao Zhang Jingtai Sun Huadong Fu Jianxin Xie Beijing advanced Innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Key Laboratory for advanced Materials Processing(MOE) University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and Processing for Modern transportation University of Science and Technology BeijingBeijing 100083China Liaoning Academy of Materials Shenyang 110004China

Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other *** the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper *** the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this *** new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and *** total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state *** dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

关键词： element substitution copper alloy solid solution strengthening microstructure and performance

Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1322-1332页

作者： Qinghe Cui Xuefeng Liu Wenjing Wang Shaojie Tian Vasili Rubanik Vasili Rubanik Jr. Dzmitry Bahrets Beijing advanced Innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and Processing for Modern transportation University of Science and Technology BeijingBeijing 100083China Institute for advanced Materials and Technology University of Science and Technology BeijingBeijing 100083China Institute of Technical Acoustics National Academy of SciencesVitebsk 210009Belarus

Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the *** technology has a very broad application prospect in industrial *** have conducted extensive research on the ultrasonic vibration plastic forming of metals and laid a deep foundation for the development of this *** this review,metals were classified according to their crystal *** effects of ultrasonic vibration on the microstructure of face-centered cubic,body-centered cubic,and hexagonal close-packed metals during plastic forming and the mech-anism underlying ultrasonic vibration forming were *** main challenges and future research direction of the ultrasonic vibra-tion plastic forming of metals were also discussed.

关键词： ultrasonic vibration plastic forming crystal structure microstructure forming mechanism

Synergistic effect of gradient Zn content and multiscale particles on the mechanical properties of Al-Zn-Mg-Cu alloys with coupling distribution of coarse-fine grains

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1392-1405页

作者： Liangliang Yuan Mingxing Guo Yi Wang Yun Wang Linzhong Zhuang Institute of Effectiveness Evaluation of Flying Vehicle Beijing 100085China State Key Laboratory for advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China Beijing advanced Innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and Processing for Modern transportation University of Science and Technology BeijingBeijing 100083China

This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and *** the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is *** phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to *** reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the *** developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.

关键词： Al–Zn–Mg–Cu alloy iron-rich phase high formability microstructure mechanisms

Methane activation by[LnO]^(+):the 4f orbital matters

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第1期67卷 330-335页

作者： Bowei Yuan Jingxiang Zou Mincheng Yu Shaodong Zhou College of Chemical and Biological Engineering Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture TechnologyZhejiang UniversityHangzhou 310027China Zhejiang Provincial Innovation center of advanced Chemicals Technology Institute of Zhejiang University–QuzhouQuzhou 324000China Laboratory for Sciences and technologies of Energy Materials of Fujian Province(IKKEM) Xiamen 361005China

Gas-phase reactions of[LnO]^(+)with methane have been studied by using inductively coupled plasma-mass spectrometer(ICP-MS)combined with quantum chemical *** indicate that the[LnO]^(+)(Ln=Sm-Lu)ions are able to activate methane to generate methyl *** particular,[EuO]^(+)and[YbO]^(+)exhibit the highest ***,ab initio computations reveal a novel HAT process operating in the absence of a terminal oxygen radical,as mediated by[EuO]^(+)and[YbO]^(+).Such a process diverges from previous findings on the methane activation by metal oxide clusters,not only on the electronic pattern during the course of hydrogen transfer,but also on the important role that 4f electrons *** associated electronic origins have been discussed,and the well-designed 4f electron occupation may turn to be a promising approach in constructing lanthanide involved catalysts.

关键词： lanthanide oxides methane activation 4f orbitals quantum chemical calculation ion-molecule reaction