检索结果-南通市图书馆

Earthquake engineering and engineering Vibration 2024年第4期23卷 1029-1041页

作者： Zhu Wang Wu Ming’er Xie Qiang Department of Structural engineering Tongji UniversityShanghai 200092China Key Laboratory of Performance Evolution and Control for engineering Structures(Tongji University) Shanghai 200092China

Cemented and mechanically clamped types of end fittings(fitting-C and fitting-M)are commonly used in transformer *** the Luding Ms 6.8 earthquake that occurred in China on September 5,2022,all transformer bushings with the two types of end fittings in a 500 kV substation were ***-earthquake field investigations were conducted,and the failures of the two types of bushings were *** elementary simulation models of the transformer-bushing systems were developed to simulate the engineering failures,and further compute their seismic responses for *** results indicate that the hitch lugs of the connection flange are structurally harmful to seismic ***-M can decrease the bending stiffness of the bushing due to the flexible sealing rubber *** it provides a more flexible connection that dissipates energy,the peak accelerations and relative displacements at the top of the bushing are significantly lower than those of the bushing with *** with fitting-C,fitting-M transfers the high-stress areas from the connection flange to the root of the porcelain,so the latter becomes the most vulnerable ***-M increases the failure risk of the low-strength porcelain,indicating the unsuitability of applying it in high-intensity fortification regions.

关键词： transformer bushing end fitting Luding earthquake,engineering failure seismic responses

Antibonding orbital tailor and stress relief engineering for FeS2 complex toward superior sodium storage

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5048-5059页

作者： You-Bin Zhang Zhen-Guo Qi Fu-Sheng Liu Guo-Hui Qin State Key Laboratory Base for Eco-Chemical engineering College of Chemical EngineeringQingdao University of Science and Technology Shandong Synergetic Innovation Center of Ecological and Chemical engineering

The sluggish kinetics behaviors and vast volume variations of Na+hosts to FeS2anode involved intercalation,and conversion reactions plague its applicability of sodium-ion batteries （SIBs）.Here,a significantly expedited kinetics via cation intercalation and considerably relieved stress accumulation by constructing the concave scaffold protector are approached for *** Mn2+intercalation into FeS2,a new stable Mn–FeS2was generated with distorted coordination;elevated antibonding orbital occupancy and lowed d band center to the release of more free Na+were achieved,which was further encapsulated by hollow bowl-like carbon spheres （BC）This cation intercalation and concave morphology strategies confer Mn–FeS2@BC significantly enhanced electron ion transport kinetics via reversed electron transfer to FeS2fast desolvation kinetics,and evidently depressed structural deformation during Na+insertion and ***,Mn–FeS2@BC delivers the longevity and stable Na+storage capacity in both half and full cell ***,Mn–FeS2@BC also displays excellen adaptability in a wider temperature *** work proposes new views into the deep regulation of electrochemical performance of transition metal anodes via intercalation chemistry and concave engineering.

关键词： Concave engineering FeS2 Intercalation chemistry Sodium capture

The Effect of Spironolactone Loading on the Properties of 3D-Printed Polycaprolactone/Gold Nanoparticles Composite Scaffolds for Myocardial Tissue engineering

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第2期21卷 924-937页

作者： Sharareh Ghaziof Shahrokh Shojaei Mehdi Mehdikhani Mohammad Khodaei Milad Jafari Nodoushan Department of Biomedical engineering Central Tehran BranchIslamic Azad UniversityTehran***Iran Stem Cells Research Center Tissue Engineering and Regenerative Medicine InstituteCentral Tehran BranchIslamic Azad UniversityTehran***Iran Department of Biomedical engineering Faculty of EngineeringUniversity of IsfahanIsfahan***Iran Materials engineering Group Golpayegan College of EngineeringIsfahan University of TechnologyGolpayegan87717-67498Iran Hard Tissue engineering Research Center Tissue Engineering and Regenerative Medicine InstituteCentral Tehran BranchIslamic Azad UniversityTehran***Iran

Engineered cardiac constructs(ECC)aid in the progression of regenerative medicine,disease modeling and targeted drug delivery to adjust and aim the release of remedial combination as well as decrease the side effects of *** this research,polycaprolactone/gold nanoparticles(PCL/GNPs)three-dimensional(3D)composite scaffolds were manufactured by 3D printing using the fused deposition modeling(FDM)method and then coated with gelatin/spironolactone(GEL/SPL).Scanning electron microscopy(SEM)and Fourier transform-infrared spectroscopy(FTIR–ATR)were applied to characterize the ***,drug release,biodegradation,behavior of the myoblasts(H9C2)cell line,and cytotoxicity of the 3D scaffolds were *** microstructural observation of the scaffolds reported interconnected pores with 150–300µm in *** 3D scaffolds were degraded significantly after 28 days of immersion in stimulated body fluid(SBF),with the maximum rate of GEL-coated 3D *** release from cross-linked GEL coating demonstrated the excess of drug release over time,and according to the control release systems,the drug delivery systems(DDS)went into balance after the 14th *** addition,cell culture study showed that with the addition of GNPs,the proliferation of(H9C2)was enhanced,and with GEL/SPL coating the cell attachment and viability were improved *** findings suggested that PCL/GNPs 3D scaffolds coated with GEL/SPL can be an appropriate choice for myocardial tissue engineering.

关键词： Polycaprolactone Gold nanoparticles Drug delivery systems Spironolactone Cell behavior Myoblasts

Constructing a biofunctionalized 3D-printed gelatin/sodium alginate/chitosan tri-polymer complex scaffold with improvised biological andmechanical properties for bone-tissue engineering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第1期7卷 57-73页

作者： Amit Kumar Singh Krishna Pramanik Amit Biswas Centre of Excellence in Tissue engineering Department of Biotechnology and Medical EngineeringNational Institute of TechnologyRourkela 769008India

Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering *** present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue *** experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and *** resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)*** studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural *** scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue *** tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of *** enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue *** vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold *** addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its pote

关键词： Scaffold Biomaterial Sodium alginate Chitosan Gelatin 3D printing Tissue engineering

In vitro investigations on the effects of graphene and graphene oxide on polycaprolactone bone tissue engineering scaffolds

在线全文

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第5期7卷 651-669页

作者： Yanhao Hou Weiguang Wang Paulo Bartolo School of engineering Faculty of Science and EngineeringThe University of ManchesterManchesterUK Singapore Centre for 3D Printing School of Mechanical and Aerospace EngineeringNanyang Technological UniversitySingaporeSingapore

Polycaprolactone(PCL)scaffolds that are produced through additive manufacturing are one of the most researched bone tissue engineering structures in the *** to the intrinsic limitations of PCL,carbon nanomaterials are often investigated to reinforce the PCL *** several studies that have been conducted on carbon nanomaterials,such as graphene(G)and graphene oxide(GO),certain challenges remain in terms of the precise design of the biological and nonbiological properties of the *** paper addresses this limitation by investigating both the nonbiological(element composition,surface,degradation,and thermal and mechanical properties)and biological characteristics of carbon nanomaterial-reinforced PCL scaffolds for bone tissue engineering *** showed that the incorporation of G and GO increased surface properties(reduced modulus and wettability),material crystallinity,crystallization temperature,and degradation ***,the variations in compressive modulus,strength,surface hardness,and cell metabolic activity strongly depended on the type of ***,a series of phenomenological models were developed based on experimental results to describe the variations of scaffold’s weight,fiber diameter,porosity,and mechanical properties as functions of degradation time and carbon nanomaterial *** results presented in this paper enable the design of three-dimensional(3D)bone scaffolds with tuned properties by adjusting the type and concentration of different functional fillers.

关键词： Additive manufacturing Bone tissue engineering Carbon nanomaterial Graphene Graphene oxide Scaffold

Predicting Rock Burst in Underground engineering Leveraging a Novel Metaheuristic-Based LightGBM Model

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第7期140卷 229-253页

作者： Kai Wang Biao He Pijush Samui Jian Zhou No.Three engineering Co. Ltd.CCCC First Highway Engineering CompanyBeijing101102China Department of Civil engineering Faculty of EngineeringUniversiti MalayaKuala Lumpur50603Malaysia Department of Civil engineering National Institute of Technology PatnaBihar800005India School of Resources and Safety engineering Central South UniversityChangsha410083China

Rock bursts represent a formidable challenge in underground engineering,posing substantial risks to both infrastructure and human *** sudden and violent failures of rock masses are characterized by the rapid release of accumulated stress within the rock,leading to severe seismic events and structural ***,the development of reliable prediction models for rock bursts is paramount to mitigating these *** study aims to propose a tree-based model—a Light Gradient Boosting Machine(LightGBM)—to predict the intensity of rock bursts in underground engineering.322 actual rock burst cases are collected to constitute an exhaustive rock burst dataset,which serves to train the *** population-basedmetaheuristic algorithms are used to optimize the hyperparameters of the LightGBM ***,the sensitivity analysis is used to identify the predominant factors that may incur the occurrence of rock *** results show that the population-based metaheuristic algorithms have a good ability to search out the optimal hyperparameters of the LightGBM *** developed LightGBM model yields promising performance in predicting the intensity of rock bursts,with which accuracy on training and testing sets are 0.972 and 0.944,*** sensitivity analysis discloses that the risk of occurring rock burst is significantly sensitive to three factors:uniaxial compressive strength(σc),stress concentration factor(SCF),and elastic strain energy index(Wet).Moreover,this study clarifies the particular impact of these three factors on the intensity of rock bursts through the partial dependence plot.

关键词： Rock burst prediction LightGBM coati optimization algorithm pelican optimization algorithm partial dependence plot

A Practical Study of Knowledge Mapping Empowering the Construction of engineering Costing Software Application Courses in Undergraduate Colleges and Universities

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Contemporary Educational Research 2024年第9期8卷 129-133页

作者： Hongmei Wang Ying Lin Xiaolin Gan Chongqing Institute of engineering Chongqing 400056China

Relying on the talent cultivation program of Chongqing Institute of engineering,this paper combines the characteristics of the engineering Costing Software Application course with its current status quo,analyzes the existing problems and teaching pain points,and introduces knowledge *** course construction is carried out in terms of the combing of knowledge points,the optimization of the course structure,the innovation of the teaching method,and the evaluation and feedback of the teaching in order to improve the systematicity and structural nature of the teaching content,enhance students’learning experience,and enhance their learning *** is conducive to the formation of students’knowledge systems and provides a basis for discussion and reference for improving the quality of teaching and cultivating application-oriented talents who meet the market demand.

关键词： Knowledge mapping Curriculum construction Structure optimization

Surface engineering with ionic polymers on membranes for boron removal

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and engineering 2024年第5期18卷 61-69页

作者： Xiting Zhang Chenyi Fang J Paul Chen Sui Zhang Department of Chemical and Biomolecular engineering National University of SingaporeSingapore 117576Singapore Department of Civil and Environmental engineering National University of SingaporeSingapore 119260Singapore College of Chemistry and Environmental engineering Shenzhen UniversityShenzhen 518060China

Removal of boric acid from seawater and wastewater using reverse osmosis membrane technologies is imperative and yet remains inadequately addressed by current commercial *** research efforts performed post-modification of reverse osmosis membranes to enhance boron rejection,which is usually accompanied by substantial sacrifice in water *** study delves into the surface engineering of low-pressure reverse osmosis membranes,aiming to elevate boron removal efficiency while maintaining optimal salt rejection and water *** were modified by the self-polymerization and co-deposition of dopamine and polystyrene sulfonate at varying ratios and *** surfaces became smoother and more hydrophilic after *** optimum membrane exhibited a water permeability of 9.2±0.1 L·m^(-2)·h^(-1)·bar^(-1),NaCl rejection of 95.8%±0.3%,and boron rejection of 49.7%±0.1% and 99.6%±0.3% at neutral and alkaline pH,*** water permeability is reduced by less than 15%,while the boron rejection is 3.7 times higher compared to the blank *** research provides a promising avenue for enhancing boron removal in reverse osmosis membranes and addressing water quality concerns in the desalination process.

关键词： membrane low-pressure reverse osmosis boron surface engineering

Heterogeneous engineering of MnSe@NC@ReS_(2) core-shell nanowires for advanced sodium-/potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3713-3723页

作者： Sheng-Jun Lu Jin-Yi Lin Cai-Hong Wang Yu-Fei Zhang Yi Zhang Hao-Sen Fan College of Materials Science and Metallurgy engineering Guizhou University Guiyang 550025China School of Energy Science and engineering Nanjing Tech UniversityNanjing 211816China School of Chemistry and Chemical engineering Guangzhou UniversityGuangzhou 510006China

Sodium-ion batteries(SIBs) and potassium-ion batteries(PIBs) have been attracting great attentions and widely been exploited due to the abundant sodium/potassium ***,the preparation of high-powered anode materials for SIBs/PIBs plays a decisive role for the commercial applications of SIBs/PIBs in the *** selenides are a class of potential anode materials for SIBs/PIBs because of their small band gap and high electrical *** this work,MnSe and ReS_(2) core-shell nanowires connecting by polydopamine derived carbon nanotube(MnSe@NC@ReS_(2)) have been successfully synthesized from growing ReS_(2) nanosheets array on the surface of MnSe@NC nano wires,which present excellent Na^(+)/K^(+) storage *** applied as SIBs anode,the specific capacity of 300 mAh·g^(-1) was maintwined after 400 cycles at the current density of 1.0 A·g^(-1).Besides,it could also keep 120 mAh·g^(-1) specific capacity after 900 cycles at 1.0 A·g^(-1) for the anode of *** heterogeneous engineering and one-dimensional-two-dimensional(1D-2D) hybrid strategies could provide an ideal strategy for the synthesis of new hetero-structured anode materials with outstanding battery performance for SIBs and PIBs.

关键词： Heterogeneous engineering Core-shell nanowires MnSe@NC@ReS_(2)nanowires Na^(+)batteries K^(+)batteries

Self-derivation and reconstruction of silver nanoparticle reinforced cobalt-nickel bimetallic hydroxides through interface engineering for overall water splitting

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 590-599,I0013页

作者： Yan Li Jie Han Weiwei Bao Junjun Zhang Taotao Ai Mameng Yang Chunming Yang Pengfei Zhang National and Local Joint engineering Laboratory for Slag Comprehensive Utilization and Environmental Technology School of Materials Science and EngineeringShaanxi University of TechnologyHanzhong 723000ShaanxiChina State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical engineering College of Chemistry&Chemical EngineeringNingxia UniversityYinchuan 750021NingxiaChina College of Chemistry&Chemical engineering Yan’an UniversityYan’an 716000ShaanxiChina School of Chemistry and Chemical engineering Shanghai Jiao Tong UniversityShanghai 200240China

Designing efficient and long-lasting non-metal electrocatalysts is an urgent task for addressing the issue of kinetic hysteresis in electrochemical oxidation *** bimetallic hydroxides,catalyzing the oxygen evolution reaction(OER),have significant research potential because hydroxide reconstruction to generate an active phase is a remarkable ***,the complete reconstruction of ultrathin CoNi(OH)_(2) nanosheets was achieved by embedding Ag nanoparticles into the hydroxide to induce a spontaneous redox reaction(SRR),forming heterojunction Ag@CoNi(OH)_(2) for bifunctional *** calculations and in situ Raman and ex situ characterizations revealed that the inductive effect of the Ag cation redistributed the charge to promote phase transformation to highly activate Ag-modified *** Co-Ni dual sites in Co/NiOOH serve as novel active sites for optimizing the intermediates,thereby weakening the barrier formed by OOH^*.Ag@CoNi(OH)_(2) required a potential of 1.55 V to drive water splitting at a current density of 10 mA cm^(-2),with nearly 98.6% Faraday *** ion induction and triggering of electron regulation in the OER via the synergistic action of the heterogeneous interface and surface reconstruction,this strategic design can overcome the limited capacity of bimetallic hydroxides and bridge the gap between the basic theory and industrialization of water decomposition.

关键词： Surface reconstruction Bimetallic hydroxides Ag nanoparticle Operando Raman Overall water splitting