检索结果-南通市图书馆

Study on the clogging mechanism of punching screen in sand control by the punching structure parameters

Petroleum Science 2024年第1期21卷 609-620页

作者： Fu-Cheng Deng Fu-Lin Gui Bai-Tao Fan Lei Wen Sheng-Hong Chen Ning Gong Yun-Chen Xiao Zhi-Hui Xu Yangtze University Jingzhou434023HubeiChina cnooc Research Institute ltd. Beijing100028China cnooc Ener Tech-Drilling&Production Co. Tianjin300457China Tianjin branch of cnooc ltd. Tianjin300459China

As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas well.However,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the screen.To explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined method.According to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was analyzed.The results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of clogging.In the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control unit.In the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the opening.In the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage rate.The microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen and sand prevention selection.

关键词： Punching screen Plugging CFD-DEM Size parameter Sand control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical Simulation of Asphaltene Precipitation and Deposition during Natural Gas and CO_(2) Injection

引用

Fluid Dynamics & Materials Processing 2024年第2期20卷 275-292页

作者： Shasha Feng Yi Liao Weixin Liu Jianwen Dai Mingying Xie Li Li Nanhai East Petroleum Research Institute Shenzhen Branch of CNOOC Ltd.Shenzhen518000China

Asphaltene deposition is a signiﬁcant problem during gas injection processes,as it can block the porous medium,the wellbore,and the involved facilities,signiﬁcantly impacting reservoir productivity and ultimate oil recovery.Only a few studies have investigated the numerical modeling of this potential effect in porous media.This study focuses on asphaltene deposition due to natural gas and CO_(2) injection.Predictions of the effect of gas injection on asphaltene deposition behavior have been made using a 3D numerical simulation model.The results indicate that the injection of natural gas exacerbates asphaltene deposition,leading to a signiﬁcant reduction in permeability near the injection well and throughout the reservoir.This reduction in permeability strongly affects the ability of gas toﬂow through the reservoir,resulting in an improvement of the displacement front.The displacement efﬁ-ciency of the injection gas process increases by up to 1.40%when gas is injected at 5500 psi,compared to the scenario where the asphaltene model is not considered.CO_(2) injection leads to a miscible process with crude oil,extracting light and intermediate components,which intensiﬁes asphaltene precipitation and increases the viscosity of the remaining crude oil,ultimately reducing the recovery rate.

关键词： Reservoir simulation asphaltenes deposition natural gas injection CO_(2)injection

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Risk Assessment of Deep-Water Horizontal X-Tree Installation

引用

China Ocean Engineering 2024年第2期38卷 210-220页

作者： MENG Wen-bo FU Guang-ming HUANG Yi LIU Shu-jie HUANG Liang GAOYong-hai cnooc China Limited Zhanjiang BranchZhanjiang 524057China Key Laboratory of Unconventional Oil and Gas Development Ministry of Education(China University of Petroleum(East China))Qingdao 266580China

Due to the high potential risk and many influencing factors of subsea horizontal X-tree installation,to guarantee the successful completion of sea trials of domestic subsea horizontal X-trees,this paper established a modular risk evaluation model based on a fuzzy fault tree.First,through the analysis of the main process oftree down and combining the Offshore&Onshore Reliability Data(OREDA)failure statistics and the operation procedure and the data provided by the job,the fault tree model of risk analysis of the tree down installation was established.Then,by introducing the natural language of expert comprehensive evaluation and combining fuzzy principles,quantitative analysis was carried out,and the fuzzy number was used to calculate the failure probability of a basic event and the occurrence probability of a top event.Finally,through a sensitivity analysis of basic events,the basic events of top events significantly affected were determined,and risk control and prevention measures for the corresponding high-risk factors were proposed for subsea horizontal X-tree down installation.

关键词： subsea horizontal X-tree risk assessment fuzzy fault tree modular risk evaluation model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Gel-Based Solidification Technology for Large Fracture Plugging

引用

Fluid Dynamics & Materials Processing 2024年第3期20卷 563-578页

作者： Kunjian Wang Ruibin He Qianhua Liao Kun Xu Wen Wang Kan Chen Tianjin branch of cnooc(China)Co. Ltd.Tianjin300450China Jingzhou Jiahua Technology Co. Ltd.Jingzhou434001China

Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often undergo contaminationvia formation water, which prevents them from being effective over long times. Hence, in this study, aset of oil-based composite gels based on waste grease and epoxy resin has been developed. These materials havebeen observed to possess high compressive strength and resistance to the aforementioned contamination, therebyleading to notable increase in plugging success rate. The compressive strength, thickening time, and resistance toformation water pollution of these gels have been evaluated indoors. The results show that the compressivestrength of the gel can reach 11 MPa;additionally, the related gelation time can be controlled to be more than3 h, thereby providing a safe construction time;Invasion of formation water has a small effect on the gel strengthand does not shorten the thickening time. All considered performance indicators of the oil-based gel confirm itssuitability as a plugging agent for fault fractures.

关键词： Drilling loss fault fracture oil-based gel compressive strength gel plugging

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Remaining Useful Life Prediction Method for Multi-Component System Considering Maintenance:Subsea Christmas Tree System as A Case Study

引用

China Ocean Engineering 2024年第2期38卷 198-209页

作者： WU Qi-bing CAI Bao-ping FAN Hong-yan WANG Guan-nan RAO Xi GE Weifeng SHAO Xiao-yan LIU Yong-hong cnooc Safety Technology Services Co. Ltd.Tianjin 300456China College of Mechanical and Electronic Engineering China University of PetroleumQingdao 266580China cnooc EnerTech Safety&Environmental Protection BranchTianjin 300456China

Maintenance is an important technical measure to maintain and restore the performance status of equipment and ensure the safety of the production process in industrial production,and is an indispensable part of prediction and health management.However,most of the existing remaining useful life(RUL)prediction methods assume that there is no maintenance or only perfect maintenance during the whole life cycle;thus,the predicted RUL value of the system is obviously lower than its actual operating value.The complex environment of the system further increases the difficulty of maintenance,and its maintenance nodes and maintenance degree are limited by the construction period and working conditions,which increases the difficulty of RUL prediction.An RUL prediction method for a multi-omponent system based on the Wiener process considering maintenance is proposed.The performance degradation model of components is established by a dynamic Bayesian network as the initial model,which solves the uncertainty of insufficient data problems.Based on the experience of experts,the degree of degradation is divided according to Poisson process simulation random failure,and different maintenance strategies are used to estimate a variety of condition maintenance factors.An example of a subsea tree system is given to verify the effectiveness of the proposed method.

关键词： remaining useful life Wiener process dynamic Bayesian networks maintenance subsea Christmas tree system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Data-Oriented Method to Optimize Hydraulic Fracturing Parameters of Tight Sandstone Reservoirs

引用

Energy Engineering 2024年第6期121卷 1657-1669页

作者： Zhengrong Chen Mao Jiang Chuanzhi Ai Jianshu Wu Xin Xie cnooc Research Institute Co. Ltd.Beijing100028China

Based on the actual data collected from the tight sandstone development zone, correlation analysis using theSpearman method was conducted to determine the main factors influencing the gas production rate of tightsandstone fracturing. An integrated model combining geological engineering and numerical simulation of fracturepropagation and production was completed. Based on data analysis, the hydraulic fracture parameters wereoptimized to develop a differentiated fracturing treatment adjustment plan. The results indicate that the influenceof geological and engineering factors in the X1 and X2 development zones in the study area differs significantly.Therefore, it is challenging to adopt a uniform development strategy to achieve rapid production increase. Thedata analysis reveals that the variation in gas production rate is primarily affected by the reservoir thickness andpermeability parameters as geological factors. On the other hand, the amount of treatment fluid and proppantaddition significantly impact the gas production rate as engineering factors. Among these factors, the influence ofgeological factors is more pronounced in block X1. Therefore, the main focus should be on further optimizing thefracturing interval and adjusting the geological development well location. Given the existing well location, thereis limited potential for further optimizing fracture parameters to increase production. For block X2, the fracturingparameters should be optimized. Data screening was conducted to identify outliers in the entire dataset, and adata-driven fracturing parameter optimization method was employed to determine the basic adjustment directionfor reservoir stimulation in the target block. This approach provides insights into the influence of geological,stimulation, and completion parameters on gas production rate. Consequently, the subsequent fracturing parameteroptimization design can significantly reduce the modeling and simulation workload and guide field operations toimprove and optimize hydraulic fracturing effic

关键词： Data mechanism driven fracturing parameters gas production correlation tight sandstone gas

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Experimental study of the effects of a multistage pore-throat structure on the seepage characteristics of sandstones in the Beibuwan Basin:Insights into the flooding mode

引用

Petroleum Science 2024年第2期21卷 1044-1061页

作者： Lei Wang Xiao Lei Qiao-Liang Zhang Guang-Qing Yao Bo Sui Xiao-Jun Chen Ming-Wei Wang Zhen-Yu Zhou Pan-Rong Wang Xiao-Dong Peng zhanjiang branch China National Offshore Oil Corporation(CNOOC)LimitedZhanjiang524057GuangdongChina Faculty of Earth Resources China University of Geosciences(Wuhan)Wuhan430074HubeiChina School of Resources and Safety Engineering Chongqing UniversityChongqing400044China School of Engineering University of ManchesterManchester M139WJUK Hainan branch China National Offshore Oil Corporation(CNOOC)LimitedHaikou570311HainanChina

To investigate the relationship between grain sizes, seepage capacity, and oil-displacement efficiency in the Liushagang Formation of the Beibuwan Basin, this study identifies the multistage pore-throat structure as a crucial factor through a comparison of oil displacement in microscopic pore-throat experiments. The two-phase flow evaluation method based on the Li-Horne model is utilized to effectively characterize and quantify the seepage characteristics of different reservoirs, closely relating them to the distribution of microscopic pores and throats. It is observed that conglomerate sandstones at different stages exhibit significant heterogeneity and noticeable differences in seepage capacity, highlighting the crucial role played by certain large pore throats in determining seepage capacity and oil displacement efficiency. Furthermore, it was found that the displacement effects of conglomeratic sandstones with strong heterogeneity were inferior to those of conventional homogeneous sandstone, as evidenced by multiple displacement experiments conducted on core samples with varying granularities and flooding systems. Subsequently, core-based experiments on associated gas flooding after water flooding were conducted to address the challenge of achieving satisfactory results in a single displacement mode for reservoirs with significant heterogeneity. The results indicate that the oil recovery rates for associated gas flooding after water flooding increased by 7.3%-16.4% compared with water flooding alone at a gas-oil ratio of approximately 7000 m^(3)/m^(3). Therefore, considering the advantages of gas flooding in terms of seepage capacity, oil exchange ratio, and the potential for two-phase production, gas flooding is recommended as an energy supplement mode for homogeneous reservoirs in the presence of sufficient gas source and appropriate tectonic angle. On the other hand, associated gas flooding after water flooding is suggested to achieve a more favorable development effect compared to a single mode of energy

关键词： Beibuwan Basin Multistage pore-throat structure Multistage seepage characteristics Microscopic visualization Heterogeneity Gas/water flooding Flooding mode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Probability Distribution Characteristics of Strong Nonlinear Waves Under Typhoon Conditions in the Northern South China Sea

引用

Journal of Ocean University of China 2024年第3期23卷 583-593页

作者： GONG Yijie XIE Botao FU Dianfu WANG Zhifeng PANG Liang College of Engineering Ocean University of ChinaQingdao 266100China cnooc Research Institute ltd. Beijing 100028China

The generation and propagation mechanism of strong nonlinear waves in the South China Sea is an essential research area.In this study,the third-generation wave model WAVEWATCH III is employed to simulate wave fields under extreme sea states.The model,integrating the ST6 source term,is validated against observed data,demonstrating its credibility.The spatial distribution of the occurrence probability of strong nonlinear waves during typhoons is shown,and the waves in the straits and the northeastern part of the South China Sea show strong nonlinear characteristics.The high-order spectral model HOS-ocean is employed to simulate the random wave surface series beneath five different platform areas.The waves during the typhoon exhibit strong nonlinear characteristics,and freak waves exist.The space-varying probability model is established to describe the short-term probability distribution of nonlinear wave series.The exceedance probability distributions of the wave surface beneath different platform areas are compared and analyzed.The results show that with an increase in the platform area,the probability of a strong nonlinear wave beneath the platform increases.

关键词： strong nonlinear wave typhoon wave series probability distribution model exceedance probability

来源：

维普期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Paleoenvironmental Characteristics of Paleogene Lacustrine Source Rocks in the Western Bozhong Sag,Bohai Bay Basin,China:Evidence from Biomarkers,Major and Trace Elements

引用

Acta Geologica Sinica(English Edition) 2024年第1期98卷 220-240页

作者： WANG Xiang LIU Guangdi SONG Zezhang SUN Mingliang WANG Xiaolin WANG Feilong CHEN Rongtao GENG Mingyang LI Yishu State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing 102249China College of Geosciences China University of PetroleumBeijing 102249China China National Offshore Oil Co. Ltd.(CNOOC)Tianjin Branch CompanyTianjin 300459China cnooc Research Institute Beijing 100028China

The organic matter(OM)enrichment mechanisms and depositional environment characteristics of lacustrine source rocks in the western Bozhong Sag,Bohai Bay Basin in Northeast China remain controversial.To address these issues,based on Rock-Eval pyrolysis,kerogen macerals,H/C and O/C ratios,GC-MS,major and trace elements,the Dongying Formation Member(Mbr)3(E_(3)d_(3)),the Shahejie Formation mbrs 1 and 2(E_(2)s_(1+2)),and the Shahejie Mbr 3(E_(2)s_(3))source rocks in the western Bozhong Sag were studied.The above methods were used to reveal their geochemical properties,OM origins and depositional environments,all of which indicate that E_(2)s_(1+2)and E_(2)s_(3)are excellent source rocks,and that E_(3)d_(3)is of the second good quality.E_(3)d_(3)source rocks were formed under a warm and humid climate,mainly belong to fluvial/delta facies,the E_(3)d_(3)sediments formed under weakly oxidizing and freshwater conditions.Comparatively,the depositional environments of E_(2)s_(1+2)source rocks were arid and cold climate,representing saline or freshwater lacustrine facies,and the sediments of E_(2)s_(1+2)belong to anoxic or suboxic settings with large evaporation and salinity.During the period of E_(2)s_(3),the climate became warm and humid,indicating the freshwater lacustrine facies,and E_(2)s_(3)was characterized by freshwater and abundant algae.Moreover,compared with other intervals,the OM origin of E_(3)d_(3)source rocks has noticeable terrestrial input.The OM origin of the E_(2)s_(1+2)and E_(2)s_(3)are mainly plankton and bacteria.Tectonic subsidence and climate change have affected the changes of the depositional environment in the western Bozhong Sag,thus controlling the distribution of the source rocks,the geochemical characteristics in the three intervals of lacustrine source rocks have distinct differences.Overall,these factors are effective to evaluate the paleoenvironmental characteristics of source rocks by biomarkers,major and trace elements.The established models may have positive implications for research of l

关键词： petroleum geology source rocks depositional environments biomarkers major elements trace elements Bozhong Sag

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-scale data joint inversion of minerals and porosity in altered igneous reservoirs—A case study in the South China Sea

引用

Petroleum Science 2024年第1期21卷 206-220页

作者： Xin-Ru Wang Bao-Zhi Pan Yu-Hang Guo Qing-Hui Wang Yao Guan College of Geo-exploration Science and Technology Jilin UniversityChangchun130046JilinChina Research Institute CNOOC Ltd.-ShenzhenShenzhen518000GuangdongChina

There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.

关键词： Joint inversion Altered igneous rock Element correction method Lithology identification Multi mineral volume model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：