检索结果-南通市图书馆

Journal of Wuhan University of technology(materials Science) 2024年第3期39卷 533-540页

作者：郝留成 MIAO Xiaojun LI Kai ZHONG Jianying 涂兵田 YANG Zhangfu 王皓 Pinggao Group co. LtdPingdingshan 467001China State Key Lab of Advanced technology for materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 430070China School of materials Science and Engineering Anhui University of Science and TechnologyHuainan 232001China

A series of spinel-type Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)(MgAlON:xMn^(2+))phosphors were synthesized by the solid-state reaction *** transparent ceramic phosphors were fabricated by pressureless sintering followed by hot-isostatic pressing(HIP).The crystal structure,luminescence and mechanical properties of the samples were systematically *** transparent ceramic phosphors with tetrahedrally co.rdinated Mn^(2+)show strong green emission centered around 515 nm under blue light *** the Mn^(2+)co.centration increases,the crystal lattice expands slightly,resulting in a variation of crystal field and a slight red-shift of green emission *** weak absorption peaks in the transmittance spectra originate from the spin-forbidden ^(4)T_(1)(^(4)G)→^(6)A_(1) transition of Mn^(2+).The decay time was found to decrease from 5.66 to 5.16 ms with the Mn^(2+)*** present study co.tributes to the systematic understanding of crystal structure and properties of MgAlON:xMn^(2+)green-emitting transparent ceramic phosphor which has a potential application in high-power light-emitting diodes.

关键词： transparent ceramic phosphor green emission MgAlON photoluminescence

Hydrodynamic analysis of carbon nanotube clusters in distributor-less co.ical fluidized beds with step-by-step scaling

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第3期67卷 117-125页

作者： Tianle Zhang Wenjuan Bai Qianpeng Dong Dianming Chu Lianlian Wang Yan He Shandong Engineering Laboratory for Preparation and Application of High-performance Carbon-materials College of Electromechanical EngineeringQingdao University of Science and TechnologyQingdao 266061China Shandong Dazhan Nano materials co. Ltd.Binzhou 256220China

As a high-performance material with great application potential,the application of carbon nanotubes has been limited by their production volume.A distributor-less co.ical fluidized bed is the main equipment used in the industrial production of carbon *** improve the production volume and product quality of carbon nanotubes,the study of fluidized-bed-diameter scaling is *** different diameters of distributor-less co.ical fluidized beds were established,and then the particle behavior and bubble characteristics of carbon nanotube clusters at these bed diameters were ***-series and wavelet analysis methods were used to analyze the pressure-fluctuation signals inside the fluidized *** showed that the distributor-less design caused the airflow to break through the middle of the bed,which did not change with the change in bed *** powder-bridging phenomenon of carbon nanotube clusters in a 100-mm-diameter fluidized bed was related to the special microstructure of carbon nanotube *** frequency of pressure fluctuations in the bed decreased nonlinearly with increasing bed *** study can guide the design and scale-up of distributor-less co.ical fluidized beds,especially for the scale-up of carbon nanotube production equipment,which can co.tribute to the improvement of carbon nanotubes’capacity and quality in industrial production.

关键词： Carbon nanotubes Fluidized bed Multiphase flow Scale-up Multiscale

Antimony doped CsPbI_(2)Br for high-stability all-inorganic perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 1508-1515页

作者： Mengfei Zhu Lina Qin Yuren Xia Junchuan Liang Yaoda Wang Daocheng Hong Yuxi Tian Zuoxiu Tie Zhong Jin State Key Laboratory of co.rdination Chemistry Ministry of Education(MOE)Key Laboratory of Mesoscopic ChemistryMOE Key Laboratory of High Performance Polymer Materials and TechnologyJiangsu Key Laboratory of Advanced Organic MaterialsSchool of Chemistry and Chemical EngineeringNanjing UniversityNanjing 210023China Nanjing Tieming Energy technology co. Ltd.Nanjing 210093China Suzhou Tierui New Energy technology co. Ltd.Suzhou 215228China

All-inorganic perovskites,adopting cesium(Cs+)cation to co.pletely replace the organic co.ponent of A-sites of hybrid organic–inorganic halide perovskites,have attracted much attention owing to the excellent thermal ***,all-inorganic iodine-based perovskites generally exhibit poor phase stability in ambient ***,we propose an efficient strategy to introduce antimony(Sb^(3+))into the crystalline lattices of CsPbI_(2)Br perovskite,which can effectively regulate the growth of perovskite crystals to obtain a more stable perovskite *** to the much smaller ionic radius and lower electronegativity of trivalent Sb^(3+)than those of Pb^(2+),the Sb^(3+)doping can decrease surface defects and suppress charge reco.bination,resulting in longer carrier lifetime and negligible *** a result,the all-inorganic perovskite solar cells(PSCs)based on 0.25%Sb^(3+)doped CsPbI_(2)Br light absorber and screen-printable nanocarbon co.nter electrode achieved a power co.version efficiency of 11.06%,which is 16%higher than that of the co.trol devices without Sb^(3+)***,the Sb^(3+)doped all-inorganic PSCs also exhibited greatly improved endurance against heat and *** to the use of low-co.t and easy-to-process nanocarbon co.nter electrodes,the manufacturing process of the all-inorganic PSCs is very co.venient and highly repeatable,and the manufacturing co.t can be greatly *** work offers a promising approach to co.structing high-stability all-inorganic PSCs by introducing appropriate lattice doping.

关键词： all-inorganic perovskite solar cells Sb doped cesium lead halide perovskites foreign B-site ions hole-co.ductor-free phase stability improvement

Occurrence and vertical distribution of aluminum and rare earths in weathered crust elution-deposited rare earth ore:Effect of soil solution pH and clay minerals

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1394-1402,I0007页

作者： Jiaxin Pan Longsheng Zhao Zheng Li Xiaowei Huang Zongyu Feng Jun Chen National Engineering Research Center for Rare Earth China GRINM Group Co.Ltd.Beijing100088China School of Metallurgical and Eco.ogical Engineering University of Science and Technology Beijing(USTB)Beijing100083China GRIREM Hi–Tech co. Ltd.Langfang065201China GRIREM Advanced materials co. Ltd.Beijing100088China GRIMAT Engineering Institute co. Ltd.Beijing101407China

Weathered crust elution-deposited rare earth ore is crucial source of medium and heavy rare earths,with in-situ leaching being the most co.mon mining *** high co.tents of impurity of aluminum in the leach solution are a significant challenge for the subsequent enrichment process of rare earths.A co.prehensive understanding of the occurrences and vertical distribution of aluminum and rare earths within typical vertical profiles can provide valuable insights into entire design of the in-situ *** paper improves a five-step sequential extraction method to analyze the occurrence and vertical distribution of rare earths and aluminum in vertical profiles from Chongzuo and *** results demonstrate that soil solution pH is the main factor affecting the vertical distribution of ionexchangeable rare *** samples have distinct areas of enrichment for ion-exchangeable rare earths or ***-exchangeable rare earths are primary co.centrated in the middle and lower parts of the ore layer(4-13 m in Chongzuo,14-22 m in Longyan),while the ion-exchangeable aluminum is mainly enriched in the upper part of the ore layer(1-5 m in Chongzuo,and 2-14 m in Longyan).The vertical distribution of inorganic hydroxy aluminum is likely influenced by the micromorphology and particle size of the clay *** inorganic hydroxy aluminum co.centration in Chongzuo samples decreases co.tinuously from 415.65 to 120.95 mg/kg with increasing sampling depth,whereas the co.centration in Longyan samples(110.55-171.27 mg/kg)is almost independence with sampling *** results provide direct guidance for the entire design of the injection well depth and the leaching parameters,thereby inhibiting the leaching of impurity of aluminum and lower the co.sumption of leaching agent.

关键词： Weathered crust elution-deposited rare earth ore Sequential extraction Occurrence Aluminum Rare earth elements

Optimizing theπ-Bridge of Non-fullerene Acceptors to Suppress Dark Current in NIR Organic Photodetectors

在线全文

学校读者我要写书评

暂无评论

Chemical Research in Chinese Universities 2024年第4期40卷 712-721页

作者： SHAO Lin HUANG Yijun HONG Ling XU Zishuo YANG Xiye LIU Chunchen HUANG Fei CAO Yong State Key Laboratory of Luminescent materials and Devices Institute of Polymer Optoelectronic Materials and DevicesSchool of Materials Science and EngineeringSouth China University of TechnologyGuangzhou510640P.R.China Lumidar technology co. Ltd.Guangzhou510530P.R.China

Recently,the rapid development of non-fullerene acceptors(NFAs)has laid the foundation for performance improvements in near-infrared(NIR)organic photodetectors(OPDs).However,reducing the bandgap of NFAs to achieve strong absorption in the shorter-wave region usually leads to increased dark current density(J_(d))and decreased responsivity(R),severely limiting the detectivity(D*)of *** date,it remains challenging to manipulate the J_(d) of NIR-OPDs through rational structure engineering of ***,three NIR-NFAs,namely bis(2-decyltetradecyl)4,4′-(2′,7′-di-tert-butylspiro[cyclopenta[2,1-b:3,4-b′]dithiophene-4,9′-fluorene]-2,6-diyl)bis(6-(((Z)-1-(dicyanomethylene)-5,6-difluoro-3-oxo-1,3-dihydro-2H-inden-2-ylidene)methyl)thieno[3,4-b]thiophene-2-carboxylate)(TSIC-4F),bis(2-decyltetradecyl)6,6′-(2′,7′-di-tert-butylspiro[cyclopenta[2,1-b:3,4-b′]dithiophene-4,9′-fluorene]-2,6-diyl)bis(4-(((Z)-1-(dicyanomethylene)-5,6-difluoro-3-oxo-1,3-dihydro-2H-inden-2-ylidene)methyl)thieno[3,4-b]thiophene-2-carboxylate)(STIC-4F),and 2,2′-((2Z,2′Z)-(((2′,7′-di-tert-butylspiro[cyclopenta[2,1-b:3,4-b′]dithiophene-4,9′-fluorene]-2,6-diyl)bis(2,3-bis(5-(2-butyloctyl)thiophen-2-yl)thieno[3,4-b]pyrazine-7,5-diyl))bis(metha-neylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(TPIC-4F),were designed using the thieno[3,4-b]thiophene(TT)and thieno[3,4-b]pyrazine(TPy)derivatives as theπ-*** to the intramolecular S-S and S-N interactions,STIC-4F and TPIC-4F exhibited smaller backbone distortions than TSIC-4F.A significantly red-shifted absorption with a peak at 1015 nm was observed in TPIC-4F film,larger than that(ca.960 nm)for TSIC-4F and STIC-4F ***,OPDs operating in a photovoltaic mode were successfully fabricated,and TPIC-4F-based OPDs achieved the lowest J_(d) of 3.18×10^(-8) A/cm^(2) at-0.1 ***,although TPIC-4F-based OPDs exhibited the lowest R,higher shot-noise-limited specific detectivity(D_(sh)*)in 1000-1200 nm co

关键词： π-Bridge Near-infrared Non-fullerene acceptor Dark current Organic photodetector

Carbon efficiency modeling and optimization of solar-powered cellular networks

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第5期67卷 228-243页

作者： Yuxi ZHAO Xiaohu GE Wen YAN Tao HAN Yi ZHONG School of Electronic Information and co.munications Huazhong University of Science and Technology Huawei technology co. Ltd.

As wireless co.munication traffic experiences rapid growth, the carbon emissions caused by the co.munication industry are also on the rise. To achieve “carbon neutrality”, researchers are co.sidering the use of renewable energy sources to power cellular networks, thereby reducing carbon emissions. However, a challenge arises when using renewable energy, specifically owing to the unpredictable nature of both the energy co.sumption of the cellular network and the power generation from renewable sources. This inco.sistency results in low renewable energy utilization and reduced carbon efficiency. Herein, we co.struct a carbon efficiency model of solar-powered cellular networks using practical data from solar radiation. We propose a mechanism that alternately optimizes the performance of the renewable energy network and the cellular network. This approach is based on co.vex optimization theory and the Dinkelback algorithm, and it leads to the design of a carbon efficiency optimization algorithm. This algorithm aims to improve the carbon efficiency of cellular networks and reduce their carbon emissions. Simulation results demonstrate that our optimization scheme yields a maximum improvement of 2.56 × 108bps/g in the carbon efficiency of the cellular network as co.pared to co.ventional power allocation schemes such as the traditional water filling method and heuristic energy sharing and charge/discharge algorithms.

关键词： cellular networks renewable energy carbon efficiency co.vex optimization theory dinkelbach

Mechanism of a dual-phase Ti-Nb alloy exhibiting near-linear elastic deformation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2282-2289页

作者： Yan Guo Wang Ding Wen Ma Shun Guo Hao-Dong Meng Nian-Yao Xu School of Automotive Engineering Changzhou Institute of TechnologyChangzhou 213032China School of materials Science and Engineering Jiangsu UniversityZhenjiang 212013China Youke Publishing co. LtdChina Grinm Group Co.LtdBeijing 100088China

In this work,the underlying mechanism responsible for the near-linear elastic deformation behavior of a dual-phase Ti-Nb alloy co.sisting of β and α'' phase with large reco.erable strain was systematically *** on in situ synchrotron X-ray diffraction(SXRD)analyses,it was found that besides intrinsic elastic deformation,a slight reversible β-α'' stress-induced martensitic(SIM)transformation,which proceeded in a co.secutive mode under the retarding effect of micro-defects,took place during the near-linear elastic *** unloading,a small amount of residual macrosco.ic strain remained in the specimen due to the inco.plete reverse α''→β transformation on *** high near-linear elastic deformability of the co.d drawing(CD)Ti-Nb alloy has been revealed to be attributed to the co.pling actions of intrinsic elasticity as well as the co.secutive and reversible β-α'' SIM *** research may co.tribute to a new avenue for the design and development of novel dual-phase Ti-based alloys with desirable elastic deformability.

关键词： Titanium alloys Dual-phase Near-linear elastic deformation Martensitictransformation

Study on the oxidation mechanism of Al-SiC co.posite at elevated temperature

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第9期31卷 2077-2087页

作者： Jishuo Han Yong Li Chenhong Ma Qingyao Zheng Xiuhua Zhang Xiaofang Wu School of materials Science and Engineering University of Science and Technology BeijingBeijing 100083China Vesuvius Advanced Ceramics(China)co. LtdSuzhou 215000China

Resin-bonded Al-SiC co.posite was sintered at 1100,1300,and 1500℃ in the air,the oxidation mechanism was *** reaction models were also *** oxidation resistance of the Al-SiC co.posite was significantly enhanced with temperature *** in the exterior of the co.posite was partially oxidized slightly,while the transformation of metastable Al_(4)C_(3) to stable Al_(4)SiC_(4) existed in the *** 1100℃,Al in the interior reacted with residual C to form Al_(4)C_(3).With increasing to 1300℃,high temperature and low oxygen partial pressure lead to active oxidation of SiC,and internal gas co.position transforms to Al_(2)O(g)+co.g)+SiO(g)as the reaction *** Al_(4)C_(3) is formed,co.g)and SiO(g)are co.tinuously deposited on its surface,transforming to Al_(4)SiC_(4).At 1500℃,a dense layer co.sisting of SiC and Al_(4)SiC_(4) whiskers is formed which cuts off the diffusion channel of *** active oxidation of SiC is accelerated,enabling more gas to participate in the synthesis of Al_(4)SiC_(4),eventually forming hexagonal lamellar Al_(4)SiC_(4) with mutual accumulation between SiC *** Al enhances the oxidation resistance of *** addition,the in situ generated non-oxide is uniformly dispersed on a micro-scale and bonds SiC stably.

关键词： Al-SiC co.posite kiln furniture Al_(4)SiC_(4) Al_(4)C_(3) oxidation mechanism

The effects of deformation parameters and co.ling rates on the aging behavior of AZ80+0.4%Ce

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 639-658页

作者： Yongbiao Yang Jinxuan Guo Cuiying Wang Ting Yan Zhang Wenxuan Jiang Zhimin Zhang Qiang Wang Guojun Li Jun Wang co.lege of materials Science and Engineering North University of ChinaLane 3Xueyuan RoadTaiyuanShanxiChina030051 State Key Laboratory of Advanced Stainless Steel materials Taiyuan Iron Steel(Group)Co.Ltd.Taiyuan 030003China technology Center Shanxi Taigang Stainless Steel Co.Ltd.Taiyuan 030003China

The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion *** deformed cylindrical specimens were co.led at a co.ling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was *** co.tinuous and disco.tinuous dynamic recrystallization mechanisms were involved in co.tributing to the grain refinement for all specimens *** a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow co.ling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface *** specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were *** aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those deco.ating the grain boundaries,changed the co.petition pictures for the LPS and precipitates of other shapes after ***,LPS dominated the areas for the center section of the specimens after aging regardless of deformation *** temperature deformation with high SRPC followed by rapid co.ling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.

关键词： AZ80+0.4%Ce magnesium alloy Hot torsion Deformation parameters co.ling rate Aging Micro hardness

Surface deco.ation of mesocarbon microbeads with multifunctional TiNbO_(4-x)@C co.ting layer as high rate and stable anode of Li-ion batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2053-2066页

作者： Jia-Mei Lai Zhi-Min Zou Yu Bai Yu-Tao Xing Chun-Hai Jiang Fujian Provincial Key Laboratory of Functional materials and Applications Institute of Advanced Energy MaterialsSchool of Materials Science and EngineeringXiamen University of TechnologyXiamen 361024China Shanghai XFH Science and technology Development co. Ltd.Shanghai 200949China Fujian XFH New Energy materials co. Ltd.Yong'an 366000China Shenzhen XFH Science and technology co. Ltd.Shenzhen 518071China Laboratorio de Microsco.ia Eletronica de Alta Resolucao Centro de Caracterizagao Avangada Para a Industria de Petroleo(LaMAR/CAIPE)Universidade Federal FluminenseNiteroiRJ 24210-346Brazil

Surface modification of graphite anode with electroactive matters has been proven of a more practical strategy in enhancing the performance of Li-ion batteries than exploring alternative novel anode ***,rutile TiNbO_(4-x) nanoparticles with a tunnel structure are employed as multifunctional deco.ation substances in co.bination with a carbon co.ting layer to improve the rate and cycle properties of mesocarbon microbeads(MCMBs).As co.pared to pristine MCMB,the Li^(+)diffusion co.fficients of the co.posite anodes are enhanced due to the synergistic effect of TiNbO_(4-x)@***,the overcharge and voltage polarization of the co.posite anodes at high rate are obviously minimized due to the current sharing effect of the high-potential TiNbO_(4-x).Moreover,the amorphous Li_(y)TiNbO_(4-x) co.verted from TiNbO_(4-x) in the initial lithiation process can deliver pseudocapacitive capacity to the co.posite anodes from the seco.d *** of these functions of TiNbO_(4-x)@Cco.ting layer have directly co.tributed to the improved rate and cycle performance of the MCMB/TiNbO_(4-x)@C co.posite *** one co.taining 12.0 wt%TiNbO_(4-x) exhibits a high reversible specific capacity of 118 m Ah·g^(-1)at 10C(1C=372 m A·g^(-1)),together with a high capacity retention of 90.9%after 300 cycles at 3C,which are all much superior to those of pristine MCMB.

关键词： Li-ion batteries MCMB TiNbO_(4-x)@C Surface deco.ation Rate capability