检索结果-南通市图书馆

Application of fuzzy comprehensive evaluation method to assess effect of conformance control treatments on water-injection wells

引用

Petroleum 2024年第1期10卷 165-174页

作者： Hu Jia Pengwu Li Wei Lv Jianke Ren Chen Cheng Rui Zhang Zhengjun Zhou Yanbin Liang State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University oil and Gas Technology Research Institute PetroChina Changqing Oilfield Company oil Production Technology Institute of PetroChina Dagang oilfield company

As an effective method to prolong the life of mature field, conformance control in water-injection well has been used wildly. Naturally, effect evaluation of conformance control has attracted great attention because it is an important guideline for the design of later enhanced oil recovery(EOR) plan. Usually,production responses such as excessive water reduction and oil production increment are widely used as the indicators. However, production responses may be unreliable due to the difficulty in determining an effective injection well which is caused by a large number of treated water-injection wells in a well group. Therefore, with the application of fuzzy comprehension evaluation(FCE), five evaluation indexes(injection pressure, injectivity index, slope of hall curve, variation coefficient and homogenization coefficient of injection profile) describe injection responses were selected to establish a new evaluation method in this paper. Based on fuzzy mathematics, FCE reflects the difference of evaluation ***, weights of evaluation indexes were obtained by analytic hierarchy process(AHP), which made the results more convincing. Taking Bai 239 oilfield as an example, the five injection responses indexes were used to assess treatment effect on five water-injection wells by single index evaluation and FCE. The results showed that among the five evaluation indexes mentioned above, the slope of hall curve was the most important factor affected evaluation result. In single index evaluation, opposite results may be produced easily on account of the one-sidedness of single index or human error. Furthermore, we found that effective treatment was a relative concept actually. The result of FCE was consistent with single index evaluation but FCE was more acceptable. This study suggests that FCE could be applied to another field such as water flooding, acidizing and hydraulic fracturing

关键词： Enhanced oil recovery Injection responses Fuzzy mathematics Analytic hierarchy process Effect evaluation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Molecular Dynamics Numerical Simulation of Adsorption Characteristics and Exploitation Limits in Shale oil Microscopic Pore Spaces

引用

Fluid Dynamics & Materials Processing 2024年第8期20卷 1915-1924页

作者： Guochen Xu Taizhou oil Production Plant Sinopec East China Oil and Gas CompanyTaizhou225300China

Microscopic pore structure in continental shale oil reservoirs is characterized by small pore throats and complex *** adsorption behavior of hydrocarbons on the pore walls exhibits unique physical and chemical ***,studying the adsorption morphology of hydrocarbon components in nanometer-sized pores and clarifying the exploitation limits of shale oil at the microscopic level are of great practical significance for the efficient development of continental shale *** this study,molecular dynamics simulations were employed to investigate the adsorption characteristics of various single-component shale oils in inorganic quartz fissures,and the influence of pore size and shale oil hydrocarbon composition on the adsorption properties in the pores was *** results show that different molecules have different adsorption capacities in shale oil pores,with lighter hydrocarbon components(C6H14)exhibiting stronger adsorption *** the same adsorbed molecule,the adsorption amount linearly increases with the increase in pore diameter,but larger pores contribute more to shale oil *** shale pores,the thickness of the adsorption layer formed by shale oil molecules ranges from 0.4 to 0.5 nm,which is similar to the width of alkane *** oil in the adsorbed state that is difficult to be exploited is mainly concentrated in the first adsorption *** them,the volume fraction of adsorbed shale oil in 6 nm shale pores is 40.8%,while the volume fraction of shale oil that is difficult to be exploited is 16.2%.

关键词： Shale oil utilization limit micro adsorption molecular dynamics simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The behaviors of gas-liquid two-phase flow under gas kick during horizontal drilling with oil-based muds

引用

Petroleum 2024年第1期10卷 49-67页

作者： Yu Su Huiyun Ma Jianhua Guo Xinyu Shen Zhaoliang Yang Jie Wu Engineering Technology Research Institute PetroChina Southwest Oil & Gas Field Company

Natural gas is easily soluble in oil-based muds(OBM), leading to complex flow behavior in wellbores,especially in horizontal wells. In this study, a new transient flow model considering wellbore-formation coupling and gas solubility on flow behavior is developed to simulate gas kicks during horizontal drilling with OBM. Furthermore, the effect of gas solubility on parameters such as bottom-hole pressure(BHP),gas void fraction and mixture velocity in the flow behavior is analyzed. Finally, several critical factors affecting flow behavior are investigated and compared to gas kicks in water-based muds(WBM) where the effect of solubility is neglected. The results show that the invading gas exists as dissolved gas in the OBM and as free gas in the WBM. Before the gas escapes from the OBM, the pit gain is zero and there is barely any change in the BHP, annulus return flow rate and mixture velocity, which means that detecting gas kicks through these warning signs can be challenging until they get very close to the surface and develop rapidly. However, in WBM drilling, these parameters change quickly with the increasing gas kick time. Additionally, for both cases, the longer the horizontal length and the greater reservoir permeability,the greater the decrease in BHP, and the shorter the time for gas to migrate from the bottom-hole to the wellhead. A larger flow rate contributes to a greater initial BHP and a lesser BHP reduction. This research is of value in characterizing gas kick behavior and identifying novel ways for early gas kick detection during horizontal drilling with OBM.

关键词： Flow behavior Gas solubility Gas kick Horizontal drilling oil-based muds Water-based muds

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Well Productivity Model for Multi-Layered Marine and Continental Transitional Reservoirs with Complex Fracture Networks

引用

Fluid Dynamics & Materials Processing 2024年第6期20卷 1313-1330页

作者： Huiyan Zhao Xuezhong Chen Zhijian Hu Man Chen Bo Xiong Jianying Yang Sichuan Changning Natural Gas Development company Limited PetroChina Southwest Oil and Gas Field CompanyYibin644399China Sichuan Shale Gas Exploration and Development company Limited PetroChina Southwest Oil and Gas Field CompanyNeijiang641100China New Energy Division PetroChina Southwest Oil and Gas Field CompanyChengdu610051China

Using the typical characteristics of multi-layered marine and continental transitional gas reservoirs as a basis,a model is developed to predict the related well production *** model relies on the fractal theory of tortuous capillary bundles and can take into account multiple gas flow mechanisms at the micrometer and nanometer scales,as well as the flow characteristics in different types of thin layers(tight sandstone gas,shale gas,and coalbed gas).Moreover,a source-sink function concept and a pressure drop superposition principle are utilized to introduce a coupled flow model in the reservoir.A semi-analytical solution for the production rate is obtained using a matrix iteration method.A specific well is selected for fitting dynamic production data,and the calculation results show that the tight sandstone has the highest gas production per unit thickness compared with the other types of ***,desorption and diffusion of coalbed gas and shale gas can significantly contribute to gas production,and the daily production of these two gases decreases rapidly with decreasing reservoir ***,the gas production from fractures exhibits an approximately U-shaped distribution,indicating the need to optimize the spacing between clusters during hydraulic fracturing to reduce the area of overlapping fracture *** coal matrix water saturation significantly affects the coalbed gas production,with higher water saturation leading to lower production.

关键词： Marine-continental transitional reservoir multi-layered reservoir seepage mechanisms apparent permeability hydraulic horizontal well productivity model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evaluation of Well Spacing for Primary Development of Fractured Horizontal Wells in Tight Sandstone Gas Reservoirs

引用

Fluid Dynamics & Materials Processing 2024年第5期20卷 1015-1030页

作者： Fang Li Juan Wu Haiyong Yi Lihong Wu Lingyun Du Yuan Zeng Exploration and Development Research Institute PetroChina Southwest Oil&Gas Field CompanyChengdu610041China oil and Gas Resources Department PetroChina Southwest Oil&Gas Field CompanyChengdu610000China

Methods for horizontal well spacing calculation in tight gas reservoirs are still adversely affected by the complexity of related control factors,such as strong reservoir heterogeneity and seepage *** this study,the stress sensitivity and threshold pressure gradient of various types of reservoirs are quantitatively evaluated through reservoir seepage *** the basis of these experiments,a numerical simulation model(based on the special seepage mechanism)and an inverse dynamic reserve algorithm(with different equivalent drainage areas)were *** well spacing ranges of Classes I,II,and III wells in the Q gas field are determined to be 802–1,000,600–662,and 285–400 m,respectively,with their average ranges as 901,631,and 342.5 m,*** considering both the pairs of parallel well groups and series well groups as examples,the reliability of the calculation results is *** is shown that the combination of the two models can reduce errors and provide accurate results.

关键词： Well spacing for primary development tight gas reservoir fractured horizontal well threshold pressure gradient stress sensitivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Auto-tuning PVT data using multi-objective optimization: Application of NSGA-Ⅱ algorithm

引用

Petroleum 2024年第1期10卷 135-149页

作者： Abdolhadi Zarifi Mohammad Madani Mohammad Jafarzadegan Reservoir Engineering Systems Petroleum Engineering Department Main Office Building of National Iranian South Oil Company (NISOC) Combined Planning Management National Iranian Oil Company (NIOC) Reservoir Engineering Division Petroleum Engineering Department Petroleum Engineering and Development Company (PEDEC)

Reservoir simulation is known as perhaps the most widely used, accurate, and reliable method for field development in the petroleum industry. An integral part of a reliable reservoir simulation process is to consider robust and rigorous tuned EOS models. Traditionally, EOS models are tuned iteratively through arduous workflows against experimental PVT data. However, this comes with a number of drawbacks such as forcingly using weight factors, which upon alteration adversely affects the optimization *** objective of the current work is thus to introduce an auto-tune PVT matching tool using NSGA-II multi-objective optimization. In order to illustrate the robustness of the presented technique, three different PVT samples are used, including two black-oil and one gas condensate sample. We utilize PengRobinson EOS during all the manual and auto-tuning processes. Comparison of auto-tuned EOS-generated results with those of experimental and computed statistical error values for these samples clearly show that the proposed method is robust. In addition, the proposed method, contrary to the manual matching process, provides the engineer with several matched solutions, which allows them to select a match based on the engineering background to be best amenable to the problem at hand. In addition, the proposed technique is fast, and can output several solutions within less time compared to the traditional manual matching method.

关键词： Auto-tuning PVT Equation of state NSGA-II Multi-objective optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of fracture fluid flowback on shale microfractures using CT scanning

引用

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 426-436页

作者： Jiale He Zhihong Zhao Yiran Geng Yuping Chen Jianchun Guo Cong Lu Shouyi Wang Xueliang Han Jun Zhang State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an710049China Drilling Test Engineering Department of Longdong oil and Gas Development company Changqing OilfieldPetroChina Company LimitedQingyang745000China Tight oil and Gas Exploration and Development Project Department PetroChina Southwest Oil and Gas Field CompanyChengdu610056China No.11 oil Production Plant Changqing Oilfield CompanyPetroChina Company LimitedQingyang745000China

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional *** the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not *** this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is ***,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface *** flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

关键词： Shale Flowback of fracturing fluid Microfracture Lattice Boltzmann method(LBM)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Application status and research progress of CO2 fracturing fluid in petroleum engineering: A brief review

引用

Petroleum 2024年第1期10卷 1-10页

作者： Jinzhou Zhao Tong Wu Wanfen Pu Du Daijun Qingyuan Chen Bowen Chen Jintao Li Yitao Huang State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University Shale Gas Research Institute of PetroChina Southwest oil & Gas Field company

This paper comprehensively reviews the application and research progress of CO2fracturing fluids in China, highlights the existing issues and puts forward suggestions for future development. Three types of fracturing fluid systems containing CO2, namely, CO2dry fracturing fluid, CO2energized fracturing fluid,and CO2foam fracturing fluid, are categorized based on the mass ratio and process difference between CO2, water, and treatment agents. Field applications in China reveal several problem to be resolved:（1）The application scope of CO2fracturing fluids is restricted to depleted reservoirs, re-fracturing of old wells, and medium-deep reservoirs with low formation pressure coefficients;（2） different types of CO2fracturing fluids require different processes and ground supporting equipment;（3） optimization of CO2compatibility, functionality, temperature and salt tolerance, as well as the cost of treatment agents is necessitated;（4） existing CO2fracturing fluid system fail to perform well with low friction, low filtration,and high sand-carrying capacity.（5） there lacks a targeted industry standard for evaluation of performance of CO2fracturing fluid system and treatment agents. Therefore, in order to meet the goals of CCUS-EOR, CCUS-EGR, or integration of fracturing, displacement and burial by CO2, efforts should be made in the aspects that followed, including in-depth investigation of the mechanism of CO2fracturing fluids, the adaptability and compatibility between existing equipment, different CO2fracturing fluid systems and processes, and construction of treatment agents, low-density proppants and highperformance systems of recyclability and industrial-grade. In addition, optimization of CO2fracturing fluid system based fracturing design is also crucial taking such related factors such as overall reservoir geological conditions, petrophysical properties, CO2transportation, and well site layout into consideration.

关键词： Reservoir reconstruction CO 2 fracturing fluid Fracturing fluid system Fracturing displacement burial integration

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An optimal flow rate allocation model of the oilfield treated oil pipeline network

引用

Petroleum 2024年第1期10卷 93-100页

作者： Hai Li Tianyou Fan Kun Wang Xueyuan Long Yu He Meng Wang Wen Cheng Qian Huang Huirong Huang Weichao Yu PetroChina Southwest oil & Gasfield company China Petroleum Planning & Engineering Institute School of Petroleum Engineering Chongqing University of Science and Technology PipeChina oil & Gas Control Center

oilfield treated oil pipeline network is the link connecting the upstream oilfields and the downstream refineries. Due to the differences in operating costs and transportation fee between different pipelines and the fluctuation in the demand and sales prices of the treated oil, there is an optimal flow allocation plan for the pipeline network to make the oilfield company obtain the highest social and economic benefit. In this study, a mixed integer nonlinear programming(MINLP) model is developed to determine the optimal flow rate allocation plan of the large-scale and complex treated oil pipeline network, and both the social and economic benefits are considered simultaneously. The optimization objective is the multi-objective which includes the largest user satisfaction and the highest economic benefit. The model constraints include the oilfield production capacity, refinery demand, pipeline transmission capacity,flow, pressure, and temperature of the node and station, and the pipeline hydraulic and thermal calculations. Python 3.7 is utilized for the programming of the off-line calculation procedure and the MINLP model, and GUROBI 9.0.2 is served as the MINLP solver. Moreover, the model is applied to a real treated oil pipeline network located in China, and three optimization scenarios are analyzed. For social benefit,the values of the user satisfaction of each refinery and the total network are 1 before and after optimization for scenarios 1, 2, and 3. For economic benefit, the annual revenue can be increased by 0.227,0.293, and 0.548 billion yuan after the optimization in scenario 1, 2, and 3, respectively.

关键词： Treated oil pipeline network Flow rate allocation Optimal User satisfaction Economic benefit

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Mottled dolomite in the lower Cambrian Longwangmiao formation in the Northern Sichuan Basin, South China

引用

Petroleum 2024年第1期10卷 19-29页

作者： Xuefei Yang Hao Tang Junyi Zhang Yao Du Ruifeng Tang Shuang Pan Xiang Zhou Yan Xu State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University Sichuan Provincial Key Laboratory of Gas Geology Southwest Petroleum University CCDC Chuandong Drilling company Exploration Department Petrochina Southwest Oil& Gasfield Company

At the end of Early Cambrian time, the Sichuan basin（South China） was located in a wide carbonate platform, with hundreds of meters of carbonate deposited. The Longwangmiao Formation carbonate in Sichuan basin is partially to completely dolomitized, displaying a mottled texture in the northern area of the exposure. The mottled dolomitic limestone developed parallel to bedding, with shape irregular boundaries with limestone that has not been dolomitized. The mottled dolomite is composed of powder crystalline and finely crystalline dolomite, while the matrix limestone is composed of micritic calcite. the isotopic composition of mottled dolomite(δ13C = +0.29‰PDB, δ18O =-1.15‰PDB) is similar to that of micrite calcite(δ13C =-0.49‰PDB, δ18O =-1.45‰PDB). Both isotopic values and trace element data indicate that the dolomitized fluid is originated from sea water. Some beds contain gypsum pseudomorphs and mud cracks, indicating a shallow and evaporative environment with local high salinity during deposition. Dolomitization likely took place early, in part as a result of sea water salinity concentration. Trace fossils thalassinoides horizontalis, thalassinoides callianassa and planolites developed in the Longwangmiao Formation, and the sharp edges of mottled dolomite are similar to these trace fossils. The beds are intensely bioturbated. In the burrow network, the sediments and burrow fill were coarse and loose with little clay, and it is interpreted here as being easier to be dolomitized than the surrounding *** dolomitization is thus interpreted to have occurred in the burrow system, and the degree of dolomitization was related to the degree of bioturbation, which is controlled by the trace-making creatures.

关键词： Mottled dolomite Dolomitization Longwangmiao Formation Early Cambrian Northern Sichuan basin

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：