检索结果-南通市图书馆

Si-C Foam Porous-Medium Combustion Power-Generation System for Low-Calorific-Value Biomass Syngas

Journal of Thermal Science 2025年第1期34卷 206-222页

作者： YANG Jianwen CHEN Wei CAO Bingwei LIU Xinhui LI Hang College of mechanical and Aerospace engineering Jilin University school of mechanical and Vehicle engineering Changchun University

Syngas produced from the gasification of organic feedstocks from biomass is one of the clean and sustainable sources of *** advantages of simple access and renewability of biomass energy can meet the energy needs of temporary power *** study presents a biomass power-generation system for vehicular *** biomass and a free-piston Stirling engine generator（FPSEG） as the primary material and prime mover,respectively,biomass energy is converted into electricity by combusting the syngas to heat the *** and key parameter design for biomass gasification and thermoelectric conversion systems within a power generation system were performed.A porous medium area was constructed using Si-C foam ceramics to obtain an energy-conversion experimental *** effects of bed height,porosity,porous-region diameter,and air-intake conditions on the power-generation performance were investigated,and optimisations were performed for the thermoelectric conversion *** rate of increase during FPSEG power generation first increased and then decreased with increasing bed height,peaking at a bed height of 40 *** increasing porous-region diameter accelerated FPSEG power generation,whereas porosity changes in the porous media did not significantly affect the rate of change during FPSEG power *** increasing air intake,the rate of increase during power generation first increased and then *** maximum change rate and the highest thermoelectric conversion efficiency of the power-generation system occurred at 9.5 m3/h and 6.5 m3/h（～45.1%）air intakes,*** the thermal inertia and combustion structure of the thermoelectric conversion system significantly increased the power-generation rate of the system,with 1.8 W/s being observed at a 9.7 m3/h air intake.

关键词： biomass combined heat and power (CHP) gasification porous media combustion power generation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Melting Evaluation of Phase Change Materials Impregnated into Cascaded Metal Foams with Regionalized Enhancement

引用

Journal of Thermal Science 2025年第1期34卷 223-241页

作者： WEI Xinyi ZHANG Nan ZHANG Zhaoli CAO Xiaoling YUAN Yanping school of mechanical engineering Southwest Jiaotong University

Metal foam promotes the heat transfer of phase change materials(PCMs) in the penalty of reducing the energy storage density of the composite *** this work,the effects of constant porosity(0.96,0.94,0.92,or 0.90) and pore density(PPI) of metal foam on heat transfer of composite PCMs are *** rate could be enhanced by employing with low porosity copper ***,aiming to the right bottom phase changing "dead region",a regionalized enhancement strategy of cascaded metal foams is *** dynamic melting performances of all the composite PCMs are comprehensively *** results reveal that the cascaded configuration is beneficial for *** show that the horizontal strategy enhances melting performance:a maximum of 17.98% reduction in total melting time could be reached when the rear part porosity is 90%.The energy storage density rate could be raised by 5.48%.Besides,the vertical strategy performs with a better average temperature uniformity of 0.441 and brings a lower temperature in the heated *** sum up,the regionalized enhancement of copper foam provides better performance in the phase change *** shows significant potential for solar heat storage and thermal protection.

关键词： copper metal foam heat transfer enhancement phase change materials regionalized enhancement

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fabrication and Mechano-sensing Characteristics of Bending Polypyrrole Actuator

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 240-245页

作者： CHEN Jinyou HU Wei school of Automotive engineering Hunan Financial&Industrial Vocational-technical CollegeHengyang 421002China College of mechanical and Electrical engineering Hunan Agricultural UniversityChangsha 410128China

To prepare a conductive polymer actuator with decent performance,a self-built experimental platform for the preparation of polypyrrole film is *** of the essential goals is to examine the mechanical characteristics of the actuator in the presence of various combinations of process parameters,combined with the orthogonal test method of"four factors and three levels".The bending and sensing characteristics of actuators of various sizes are methodically examined using a self-made bending polypyrrole *** functional relationship between the bending displacement and the output voltage signal is established by studying the characteristics of the actuator sensor subjected to various degrees of *** experimental results reveal that the bending displacement of the actuator tip almost exhibits a linear variation as a function of length and *** the voltage reaches 0.8 V,the bending speed of the actuator tends to be ***,the mechanical properties of the self-assembled polypyrrole actuator are verified by the design and fabrication of the microgripper.

关键词： conductive polymer polypyrrole mechanical characteristics actuators sensing characteristics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparative Evaluation and Performance Analysis of Heat Exchangers Featured with Peened Surface

引用

Journal of Thermal Science 2025年第1期34卷 50-61页

作者： DINESHBABU Chinnadurai SHIVA SANKARAN Nallasamy VENKATESH RAJA Krishnan VENKATESH Rathinavelu Department of mechanical engineering Kongunadu College of Engineering and Technology Department of mechanical engineering Selvam College of Technology Department of mechanical engineering Sona College of Technology Department of mechanical engineering Saveetha School of EngineeringSaveetha Institute of Medical and Technical Sciences (SIMATS)Saveetha University

Heat exchangers have the potential for various engineering applications,and their performance is enriched by surface *** proposed system enriches the heat exchanger's performance by adapting a peened stainless steel（SS） surface blasted with copper,grinding,sand,and *** influences peened SS surface modified with a copper blast,grinding,sandblast,and iron blast on the surface morphology of shell and tube heat exchanger surface（STHE） is analyzed via tungsten heated cathode electron gun featured scanning electron microscope and observed coarse grain *** SS surface featured STHE performance is experimentally evaluated by different flow rates（30,60,90,and 120 L/min） underwater fluid medium functioned by the temperature ranges of 25-75℃ and its results are compared with computational fluid dynamic（CFD）/heat transfer research（HTRI） analyzed *** 60 L/min flow rate was spotted as an optimum value for both shell and tube side *** STHE is operated with a 60 L/min flow rate under the different peened surfaces and evaluated its Stanton number,Nusselt number,logarithmic mean temperature difference（LMTD）,overall heat transfer coefficient,number of transfer units（NTU）,effectiveness,and exergy *** iron blasted SS peened surface was observed to have better SHTE performance like Stanton number（0.0012）,Nusselt number（2180）,reduced LMTD of 31℃,improved overall heat transfer co-efficient of 2400 W/（m2·K）,better NTU of 0.5532,good effectiveness value of 0.451 62,and hiked exergy efficiency of 10% respectively.

关键词： penned surface performance analysis shell and tube heat exchanger stainless steel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical Simulation of Radiation Transport to Improve Microalgae Cultivation in an Air-Lift Photobioreactor

引用

Journal of Thermal Science 2025年第1期34卷 62-76页

作者： ZHANG Xianbin LI Mingjia HUNG Tzuchen ZHANG Zixun Key Laboratory of Thermo-Fluid Science and engineering of Ministry of Education School of Energy and Power EngineeringXi'an Jiaotong University school of mechanical engineering Beijing Institute of Technology Department of mechanical engineering Taipei University of Technology

A comprehensive numerical model is developed to simulate the growth of microalgae under light/dark cycling *** purpose of this study is to predict the growth rate of Chlorella vulgaris cultivated in photobioreactors(PBRs) in order to improve the light conditions for microalgae and enhance the photosynthetic *** fluid dynamics(CFD) is used to simulate its internal hydrodynamic *** Lagrangian method is employed to track the movement of microalgae *** radiative transfer equation(RTE)is used to obtain light intensity *** combination of light radiation field and microalgae cell motions is used to construct the light history and they are integrated into the model of the photosynthetic units(PSU) to calculate the microalgae growth *** numerical results demonstrate that enhanced light/dark cycling frequency with ordered mixing can promote efficient microalgae *** effect of the vortex flow field generated by the baffles in an air-lift PBR is analyzed for increasing microalgae growth *** using the 1:1 baffle spacing,the biomass production of microalgae is increased by 41.8% compared to the original PBR.

关键词： light distribution particle tracking photobioreactor structure optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Potassium ions and cyano group modified g-C3N4 for effective generation of H2O2 through two-electron oxygen reduction

引用

Science China Chemistry 2025年第1期68卷 192-200页

作者： Dongying Wang Shulan Pu Yongmin Chen Ke Lei Yujie Duan Linjiao Mao Xuhui Zeng Xi Luo Yuntao Zhang Yuqin Dong Jin Zhong Zhang Yan Sun school of mechanical engineering Chengdu University Department of Chemistry and Biochemistry University of California

Potassium ions （K+） doped graphitic carbon nitride （g-C3N4） was prepared by a thermal etching method using potassium hydroxide （KOH） as an ion *** transform infrared spectroscopy （FTIR） and X-ray photoelectron spectroscopy （XPS）results showed that the generation of the cyano group was detected while introducing K+.Under simulated sunlight irradiation,the sample with a K+doping amount of 10%showed the highest hydrogen peroxide （H2O2） generation rate of2,140.2μmol *** apparent quantum yield （AQY） at 400 nm and the solar-to-chemical conversion （SCC） are 4.35%and1.23%,respectively.K+acted as a bridge between g-C3N4layers,which enhanced charge transfer ***,the cyano group enhanced the adsorption capacity of protons （H+） and promoted the yield of *** catalyst exhibited excellent photocatalytic stability based on four-cycle *** addition,a mechanism study showed that superoxide radicals （·O2-）were the most important active species in the reaction *** production of H2O2was achieved through consecutive single-electron *** study deepens the understanding of the oxygen reduction reaction process and opens up a new venue for improving H2O2generation.

关键词： photocatalysis hydrogen peroxide oxygen reduction reaction potassium doping cyano group

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A comprehensive investigation on nonlinear vibration and bending characteristics of bio-inspired helicoidal laminated composite structures

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 81-100页

作者： S.SAURABH R.KIRAN D.SINGH R.VAISH V.S.CHAUHAN school of mechanical and Materials engineering Indian Institute of Technology Mandi

Bio-inspired helicoidal composite laminates, inspired by the intricate helical structures found in nature, present a promising frontier for enhancing the mechanical properties of structural designs. Hence, this study provides a comprehensive investigation into the nonlinear free vibration and nonlinear bending behavior of bio-inspired composite plates. The inverse hyperbolic shear deformation theory(IHSDT) of plates is employed to characterize the displacement field, with the incorporation of Green-Lagrange nonlinearity. The problem is modeled using the C0finite element method(FEM), and an in-house code is developed in the MATLAB environment to solve it numerically. Various helicoidal layup configurations including helicoidal recursive(HR), helicoidal exponential(HE), helicoidal semi-circular(HS), linear helicoidal(LH), and Fibonacci helicoidal(FH)with different layup sequences and quasi-isotropic configurations are studied. The model is validated, and parametric studies are conducted. These studies investigate the effects of layup configurations, side-to-thickness ratio, modulus ratios, boundary conditions, and loading conditions at different load amplitudes on the nonlinear vibration and nonlinear bending behaviors of bio-inspired composite plates. The results show that the laminate sequence exerts a substantial impact on both nonlinear natural frequencies and nonlinear bending behaviors. Moreover, this influence varies across different side-to-thickness ratios and boundary conditions of the bio-inspired composite plate.

关键词： Inverse problems

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ammonia pyrolysis oxidation excited by nanosecond pulsed discharge:Global/fluid models hybrid solution

引用

Journal of Energy Chemistry 2025年第1期100卷 385-396页

作者： Mingming Zhang Hanyu Wu Qi Chen Jiaxin Yang Bonan Liu school of mechanical Electronic and Control Engineering Beijing Jiaotong University China University of Petroleum

The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution ***,the stable products of plasma-assisted oxidative pyrolysis of ammonia are *** results show that the consumption of NH3/O2and the production of N2/H2change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low ***,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is *** on the reaction path analysis,the simplified mechanism is *** detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified ***,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key *** results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of *** consumption of NH3by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O（1S）.However,within the sheath,almost all reactions do not ***,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and ***,the discharge interval has little effect on the sheath structure and gas mixture *** research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore th

关键词： Nanosecond pulsed discharge Ammonia Oxidative pyrolysis Fluid model Global model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Multi-model ensemble learning for battery state-of-health estimation:Recent advances and perspectives

引用

Journal of Energy Chemistry 2025年第1期100卷 739-759页

作者： Chuanping Lin Jun Xu Delong Jiang Jiayang Hou Ying Liang Zhongyue Zou Xuesong Mei State Key Laboratory for Manufacturing Systems engineering Xi'an Jiaotong University Shaanxi Key Laboratory of Intelligent Robots School of Mechanical Engineering Xi'an Jiaotong University Department of Electrical engineering and Automation Luoyang Institute of Science and Technology school of mechanical engineering Hangzhou Dianzi University

The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational performance. Despite numerous data-driven methods reported in existing research for battery SOH estimation, these methods often exhibit inconsistent performance across different application scenarios. To address this issue and overcome the performance limitations of individual data-driven models,integrating multiple models for SOH estimation has received considerable attention. Ensemble learning(EL) typically leverages the strengths of multiple base models to achieve more robust and accurate outputs. However, the lack of a clear review of current research hinders the further development of ensemble methods in SOH estimation. Therefore, this paper comprehensively reviews multi-model ensemble learning methods for battery SOH estimation. First, existing ensemble methods are systematically categorized into 6 classes based on their combination strategies. Different realizations and underlying connections are meticulously analyzed for each category of EL methods, highlighting distinctions, innovations, and typical applications. Subsequently, these ensemble methods are comprehensively compared in terms of base models, combination strategies, and publication trends. Evaluations across 6 dimensions underscore the outstanding performance of stacking-based ensemble methods. Following this, these ensemble methods are further inspected from the perspectives of weighted ensemble and diversity, aiming to inspire potential approaches for enhancing ensemble performance. Moreover, addressing challenges such as base model selection, measuring model robustness and uncertainty, and interpretability of ensemble models in practical applications is emphasized. Finally, future research prospects are outlined, specifically noting that deep learning ensemble is poised to advance ens

关键词： Contrastive Learning

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Bearing Fault Diagnosis Based on the Markov Transition Field and SE-IShufflenetV2 Model

引用

Structural Durability & Health Monitoring 2025年第1期19卷 125-144页

作者： Chaozhi Cai Tiexin Xu Jianhua Ren Yingfang Xue school of mechanical and Equipment engineering Hebei University of EngineeringHandan056038China

A bearing fault diagnosis method based on the Markov transitionﬁeld(MTF)and SEnet(SE)-IShufﬂenetV2 model is proposed in this paper due to the problems of complex working conditions,low fault diagnosis accuracy,and poor generalization of rolling ***,MTF is used to encode one-dimensional time series vibration sig-nals and convert them into time-dependent and unique two-dimensional feature ***,the generated two-dimensional dataset is fed into the SE-IShufﬂenetV2 model for training to achieve fault feature extraction and classiﬁ*** paper selects the bearing fault datasets from Case Western Reserve University and Paderborn University to experimentally verify the effectiveness and superiority of the proposed *** generalization performance of the proposed method is tested under the variable load condition and different signal-to-noise ratios(SNRs).The experimental results show that the average accuracy of the proposed method under different working conditions is 99.2%without adding *** accuracy under different working conditions from 0 to 1 HP is 100%.When the SNR is 0 dB,the average accuracy of the proposed method can still reach 98.7%under varying working ***,the bearing fault diagnosis method proposed in this paper is characterized by high accuracy,strong anti-noise ability,and ***,the proposed method can also overcome the inﬂuence of variable working conditions on diagnosis accuracy,providing method support for the accurate diagnosis of bearing faults under strong noise and variable working conditions.

关键词： Bearings Markov transitionﬁeld SE-IShufﬂenetV2

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：