检索结果-南通市图书馆

Journal of Environmental Sciences 2024年第5期139卷 12-22页

作者： Yi Yuan Wen-Long Wang Zhi-Wei Wang Jin Wang Qian-Yuan Wu Key laboratory of Microorganism Application and Risk Control of Shenzhen Guangdong Provincial Engineering Research Center for Urban Water Recycling and Environmental SafetyInstitute of Environment and EcologyShenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China Shenzhen Environmental Science and New energy Technology Engineering laboratory Tsinghua-Berkeley Shenzhen InstituteShenzhen 518055China College of Materials Science and Engineering Shenzhen UniversityShenzhen 518071China

Carbon nitride has been extensively used as a visible-light photocatalyst,but it has the disadvantages of a low specific surface area,rapid electron-hole recombination,and relatively low light *** this study,single-atom Ag was successfully anchored on ultrathin carbon nitride(UTCN)via thermal polymerization,the catalyst obtained is called *** Ag hardly changed the carbon nitride's layered and porous physical *** exhibited efficient visible-light photocatalytic performances in the degradation of various recalcitrant pollutants,eliminations of 85% were achieved by visible-light irradiation for *** with Ag improved the photocatalytic performance of UTCN by narrowing the forbidden band gap from 2.49 to 2.36 e V and suppressing electron-hole pair *** addition,Ag doping facilitated O_(2) adsorption on UTCN by decreasing the adsorption energy from -0.2 to -2.22 e V and favored the formation of O_(2)^(·-).Electron spin resonance and radical-quenching experiments showed that O_(2)^(·-)was the major reactive species in the degradation of Acetaminophen(paracetamol,APAP).

关键词： Ag single atom Carbon nitride Photocatalysis Visible light Adsorption energy Reactive species

Tribological Behaviors of Electroless Nickel-Boron Coating on Titanium Alloy Surface

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第1期37卷 309-320页

作者： Yao Jia Jianping Lai Jiaxin Yu Huimin Qi Yafeng Zhang Hongtu He Key laboratory of Testing Technology for Manufacturing Process in Ministry of Education State Key Laboratory of Environment-Friendly Energy MaterialsSouthwest University of Science and TechnologyMianyang 621010China

Titanium alloys are excellent structural materials in engineering fields,but their poor tribological properties limit their further *** plating is an effective method to enhance the tribological performance of alloys,but it is difficult to efficiently apply to titanium alloys,due to titanium alloy’s strong chemical *** this work,the electroless Nickel-Boron(Ni-B)coating was successfully deposited on the surface of titanium alloy(Ti-6AL-4V)via a new pre-treatment ***,linearly reciprocating sliding wear tests were performed to evaluate the tribological behaviors of titanium alloy and its electroless Ni-B *** was found that the Ni-B coatings can decrease the wear rate of the titanium alloy from 19.89×10^(−3)mm^(3)to 0.41×10^(−3)mm^(3),which attributes to the much higher hardness of Ni-B *** heat treatment,the hardness of Ni-B coating further increases corresponding to coating crystallization and hard phase ***,heat treatment does not improve the tribological performance of Ni-B coating,due to the fact that higher brittleness and more severe oxidative wear exacerbate the damage of heat-treated ***,the Ni-B coatings heat-treated both in air and nitrogen almost present the same tribological *** finding of this work on electroless coating would further extend the practical applications of titanium alloys in the engineering fields.

关键词： Electroless coating Titanium alloy Tribology Wear Heat treatment Nanoindentation

Photoredox catalytic alkylarylation of alkynes with arylsulfonylacetate as bifunctional reagent

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第6期67卷 2022-2028页

作者： Chonglong He Min Wang Yulong Wang Lirong Zhao Youkang Zhou Keyuan Zhang Shenyu Shen Yaqiong Su Xin-Hua Duan Le Liu School of Chemistry Engineering Research Center of Energy Storage Materials and DevicesMinistry of EducationXi’an Key Laboratory of Sustainable Energy Material ChemistryXi’an Jiaotong UniversityXi’an710049China

Difunctionalization of alkynes represents a powerful and straightforward approach to the synthesis of complex ***,the radical difunctionalization of alkynes mediated by bifunctional reagents remains challenging and underexplored,despite significant progress having been made in alkene ***,we report a novel arylsulfonylacetate skeleton in which aryl rings are attached to acetates through SO_(2),serving as a powerful bifunctional reagent for the alkylarylation of alkynes via vinyl-radical intermediate under photoredox *** modular bifunctional reagent enables the simultaneous incorporation of a wide range of functional groups,including(hetero)aryl ring and alkyl carboxylate into alkynes,resulting in synthetically valuable all-carbon tetrasubstituted alkene *** transformation is distinguished by its redox-neutral nature,readily accessible starting materials,compatibility with diverse functional groups and its capacity to facilitate convergent *** utility of this approach was further demonstrated by the late-stage functionalization of complex molecules and the preparation of fluorescent molecules and anti-cancer drugs.

关键词： bifunctional reagent photoredox catalysis Smiles rearrangement alkylarylation tetrasubstituted acyclic all-carbon olefins

A novel dandelion-based bionic proppant and its transportation mechanism in different types of fractures

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2583-2599页

作者： Jun Li Ming-Yi Wu Xu Han Si-Yuan He Ze-Yu Lin State Key laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University Sichuan Particles energy and Technology Co. Ltd Chongqing Industry Polytechnic College Petroleum systems Engineering Faculty of Engineering and Applied Science University of Regina

Low-permeability reservoirs are generally characterized by low porosity and low permeability. Obtaining high production using the traditional method is technologically challenging because it yields a low reservoir recovery factor. In recent years, hydraulic fracturing technology is widely applied for efficiently exploiting and developing low-permeability reservoirs using a low-viscosity fluid as a fracturing ***, the transportation of the proppant is inefficient in the low-viscosity fluid, and the proppant has a low piling-up height in fracture channels. These key challenges restrict the fluid(natural gas or oil) flow in fracture channels and their functional flow areas, reducing the profits of hydrocarbon *** study aimed to explore and develop a novel dandelion-bionic proppant by modifying the surface of the proppant and the fiber. Its structure was similar to that of dandelion seeds, and it had high transport and stacking efficiency in low-viscosity liquids compared with the traditional ***, the transportation efficiency of this newly developed proppant was investigated experimentally using six different types of fracture models(tortuous fracture model, rough fracture model,narrow fracture model, complex fracture model, large-scale single fracture model, and small-scale single fracture model). Experimental results indicated that, compared with the traditional proppant, the transportation efficiency and the packing area of the dandelion-based bionic proppant significantly improved in tap water or low-viscosity fluid. Compared with the traditional proppant, the dandelionbased bionic proppant had 0.1-4 times longer transportation length, 0.3-5 times higher piling-up height, and 2-10 times larger placement area. The newly developed proppant also had some other extraordinary features. The tortuosity of the fracture did not influence the transportation of the novel proppant. This proppant could easily enter the branch fracture and n

关键词： Dandelion-based bionic proppant Low-viscosity fracturing fluid Unconventional reservoir Volumetric fracturing stimulation

Solid-state synthesis and ion transport characteristics of the β-KSbF_(4) for all-solid-state fluoride-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第7期94卷 758-767页

作者： Jiali Liu Huahui Zhao Jingcheng Xia Lingguang Yi Xiaoyi Chen Dongdu Li Shuhan Ni Xinyi Su Yixuan Chen Min Liu Xianyou Wang National Base for International Science&Technology Cooperation National Local Joint Engineering Laboratory for Key Materials of New Energy Storage BatteryHunan Province Key Laboratory of Electrochemical Energy Storage&ConversionSchool of ChemistryXiangtan UniversityXiangtan 411105HunanChina College of New energy Ningbo University of TechnologyNingbo 315336ZhejiangChina

All-solid-state fluoride ion batteries(FIBs)have been recently considered as a post-lithium-ion battery system due to their high safety and high energy *** like all solid-state lithium batteries,the key to the development of FIBs lies in room-temperature electrolytes with high ionic conductivity.β-KSbF_(4) is a kind of promising solid-state electrolyte for FIBs owing to its rational ionic conductivity and relatively wide electrochemical stability window at room ***,the previous synthesis routes ofβ-KSbF_(4) required the use of highly toxic hydrofluoric acid and the ionic conductivity of as-prepared product needs to be further ***,the β-KSbF_(4) sample with an ionic conductivity of 1.04×10^(-4)s cm^(-1)(30°C)is synthesized through the simple solid-state *** order to account for the high ionic conductivity of the as-synthesizedβ-KSbF_(4),X-ray diffraction(XRD),scanning electron microscopy(SEM),and energy dispersive X-ray spectroscopy(EDS)are used to characterize the physic-ochemical *** results show that the as-synthesizedβ-KSbF_(4) exhibits higher carrier concentra-tion of 1.0×10^(-6)S cm-Hz^(-1)K and hopping frequency of 1.31×10^(6)Hz at 30°C due to the formation of the fluorine ***,the hopping frequency shows the same trend as the changes of ionic conductivity with the changes of temperature,while the carrier concentration is found to be almost *** two different trends indicate the hopping frequency is mainly responsible for the ionic conduc-tion behavior withinβ-KSbF_(4).Furthermore,the all-solid-state FIBs,in which Ag and Pb+PbF_(2) are adopted as cathode and anode,andβ-KSbF_(4) as fluoride ion conductor,are capable of reversible charge and *** assembled FIBs show a discharge capacity of 108.4 mA h g^(-1) at 1st cycle and 74.2 mA h g^(-1) at 50th *** on an examination of the capacity decay mechanism,it has been found that deterioration of the electrolyte/electrode int

关键词： Solid-state electrolyte Carrier concentration Hopping frequency β-KSbF_(4) All-solid-state fluoride ion batteries

A clean disposal method of carbide slag with carbon emission reduction:Used as a flux for iron ore sintering Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 303-314页

作者： Hanxiao Meng Jiankang Wang Xiang Liu Kelang Jin Lei Zhang Hao Zhou State Key laboratory of Clean energy Utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou310027China

Limestone or quicklime is a necessary flux in the iron ore sintering *** production and application process will cause CO_(2) emissions and various environmental pollution,but this has not attracted enough *** slag(CS)is a calcium-rich solid waste produced in acetylene production,the harmless disposal of which is still incomplete,resulting in soil and groundwater *** study investigated the granulation characteristics and sintering performance of the sintering mixture with different proportions of *** results show that replacing limestone with an appropriate proportion of CS is promising and beneficial to the formation of high-quality bonding *** CS accounts for 75%of the total mass of CS and limestone,the tumbler index increases by 8.10%and the comprehensive index decreases only from 100 to 96.16,which is within the acceptable *** application of CS in iron ore sintering can achieve a clean disposal of it and a considerable carbon emission reduction,as the main component of which is Ca(OH)2.

关键词： Ironore sintering Carbide slag Flux Carbon emission Comprehensive index

Experimental Study on the Molten Salt at Micron Scale during the Melting Process

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 70-85页

作者： TIAN Ziqian LIAO Zhirong XU Chao FANG Yongzhe JIANG Kaijun YUAN Mengdi Key laboratory of Power Station energy Transfer Conversion and System Ministry of Education of ChinaSchool of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing 102206China

The investigation of the melting behaviors of the molten salt at micron scale during the melting process is critical for explaining the solid-liquid phase transition *** this paper,a novel experimental system and analysis method were proposed to study the melting process with three heating rates in the range of1-10℃/min of the solar salt at micron *** solid-liquid boundary morphology and phase transition kinetics of molten salt particles were focused ***,the correlations between liquid fraction,temperature and time under different heating rates were *** solid-liquid boundary morphology was depicted by the visualized experimental set-up,and the instantaneous liquid volume fraction during the non-isothermal phase transition was ***,the correlation between temperature and liquid volume fraction was proposed to reveal the evolution of the solid-liquid boundary with temperature at different heating ***,the non-isothermal phase transition kinetic equation was established by introducing a constant parameter(V_(a,b)),and more kinetic parameters such as 1g V_(a,b) and-lg V_(a,b)/b were *** results showed that the exponent b is not sensitive to the heating rate with a range of 3-5 for solar salt ***,the heating rate influences the value of V_(a,b) and presents a positive ***,the non-isothermal phase transition kinetic equations at different heating rates in the range of 1-10℃/min can be quickly predicted by the proposed improved experimental test *** study could fill the research insufficiency and provide significant guidance for future research on the solid-liquid transition mechanism of molten salts at micron scale.

关键词： molten salt non-isothermal phase transition solid-liquid boundary morphology liquid volume fraction micron scale melting process

Strong hetero-interface interaction in 2D/2D WSe2/ZnIn2S4 heterostructures for highly-efficient photocatalytic hydrogen generation

在线全文

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第10期97卷 379-387页

作者： Xu Guo Xing Liu Jing Shan Zhuo Xu Zhiming Fang Lu Wang Shengzhong Liu School of energy Power and Mechanical Engineering North China Electric Power University Shaanxi Key laboratory for Advanced energy Devices School of Materials Science and Engineering Shaanxi Normal University Qinghai Advanced energy Storage laboratory SPIC Qinghai Photovoltaic Industry Innovation Center Co. Ltd.State Power Investment Corporation Key laboratory of Photoelectric Conversion and Utilization of Solar energy Dalian Institute of Chemical Physics Chinese Academy of Sciences Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences

Green hydrogen is urgently required for sustainable development of human beings and rational construction of heterostructures holds great promising for photocatalytic hydrogen ***,2D/2D WSe2/ZnIn2S4heterostructures with strong hetero-interface interaction and abundant contact were constructed via an impregnation-annealing *** charge transfer from ZnIn2S4to WSe2was evidenced by transient absorption spectroscopy in crafted heterostructures owing to the tight and2D face-to-face *** a result,the prepared WSe2/ZnIn2S4heterostructures exhibited boosted photocatalytic performance and a highest hydrogen evolution rate of 3.377 mmol/（g h） was achieved with an apparent quantum yield of 45.7% at 420 *** work not only provides new strategies to achieve efficient 2D/2D heterostructures but also paves the way for the development of green hydrogen in the future.

关键词： Indium compounds

Machine learning enabled film pressure sensor to identify surface contacts:An application in surface transmission of infectious disease

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第6期17卷 1023-1036页

作者： Baotian Chang Jianchao Zhang Yingying Geng Jiarui Li Doudou Miao Nan Zhang Beijing Key laboratory of Green Built Environment and energy Efficient Technology Beijing University of TechnologyBeijing100124China

The global prevalence of infectious diseases has emerged as a significant challenge in recent *** transmission is a potential transmission route of most gastrointestinal and respiratory infectious diseases,which is related to surface touch *** observation,the traditional method of surface touching data collection,is characterized by limited accuracy and high labor *** this work,we proposed a methodology based on machine learning technologies aimed at obtaining high-accuracy and low-labor-cost surface touch behavioral data by means of sensor-based contact *** touch sensing device,primarily utilizing a film pressure sensor and Arduino board,is designed to automatically detect and collect surface contact data,encompassing pressure,duration and *** make certain the surface touch behavior and to describe the behavioral data more accurately,six classification algorithms(*** Vector Machine and Random Forest)have been trained and tested on an experimentally available dataset containing more than 500 surface *** classification results reported the accuracy of above 85%for all the six classifiers and indicated that Random Forest performed best in identifying surface touch behaviors,with 91.8%accuracy,91.9%precision and 0.98 *** study conclusively demonstrated the feasibility of identifying surface touch behaviors through film pressure sensor-based data,offering robust support for the calculation of viral load and exposure risk associated with surface transmission.

关键词： surface transmission touch behavior film pressure sensor random forest infectious disease

Promoting effect of FeOx addition on the mechanochemically prepared vanadium-based catalyst for real PCDD/Fs removal and mechanism insight

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 478-487页

作者： Minghui Tang Ling Wang Hongxian Li Xinlei Huang Cuicui Du Shengyong Lu State Key laboratory for Clean energy Utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou 310027China

Industrial-use VOx-based catalysts usually have a higher active temperature window (>250-300℃),which becomes a“bottleneck”for the practical application of PCDD/Fs catalytic degradation *** this work,VO_(x)-FeO_(x)/TiO_(2) catalyst prepared via mechanochemically method was investigated for the catalytic removal of PCDD/*** removal efficiency of 1,2-DCBz,pure PCDD/Fs gas generated in the lab,PCDD/Fs from actual fue gas,long-term were studied,and the degradation mechanism was explored using FTIR and *** degradation efficiency of 1,2-DCBz and PCDD/Fs on VO_(x)-FeO_(x)/TiO_(2) were higher than that of VO_(x)/TiO_(2)catalyst,and the optimal FeOx addition ratio was 3 wt.%.The characterization results show that the addition of FeOx can effectively improve the pore structure,surface acidity,and VOx dispersion of the catalyst,thus contributing to increasing the V^(5+)content and surface-active oxygen,which is conducive to the improvement of adsorption and redox performance of the *** the actual MSWI (municipal solid waste incineration)fue gas,the PCDD/Fs removal efficiency over VTi-3Fe-MC maintained long-term stability,higher than 85%for 240 *** result was not significantly reduced compared with the data obtained in the *** to the analysis results of intermediate products by FTIR and GC-TOFMS,it can be inferred that the epoxidation fracture of benzene ring is the rate-limiting step of dioxin catalytic degradation *** work gives an in-depth view into the PCDD/Fs removal over VO_(x)-FeO_(x)/TiO_(2) catalysts and could provide guidelines for the rational design of reliable catalysts for industrial applications.

关键词： PCDD/F removal MSWI fue gas VO_(x)-FeO_(x)/TiO_(2) Mechanochemical GC-TOFMS