检索结果-南通市图书馆

International Journal of Coal Science & technology 2024年第1期11卷 103-118页

作者： Zhiming Sun Xinlin Wang Shaoran Jia Jialin Liang Xiaotian Ning Chunquan Li School of Chemical and Environmental Engineering China University of Mining and Technology(Beijing)Beijing100083China Key Laboratory of Coal Processing and Efficient Utilization (China University of Mining and Technology)Ministry of EducationXuzhou221116China

Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).The phase transformation of the prepared materials and gas products during the heating process are thoroughly *** is suggested that ferrous chloride participated in the phase transformation and formed Si-O-Fe *** the main gaseous products are H_(2)O,H_(2),and HCl during the heating ***,the ability of CG-FeCl_(2) to activate peroxymonosulfate(PMS)for catalytic degradation of polycyclic aromatic hydrocarbons(PAHs)and phenol was deeply *** than 95%of naphthyl,phenanthrene and phenol were removed under optimizied *** addition,1O_(2),·OH,and SO_(4)·−were involved in the CG-FeCl_(2)/PMS system from the free radical scavenging experiment,where 1O_(2) played a major role during the oxidation ***,CG-FeCl_(2)/PMS system exhibited superior stability in a relatively wide pH range and the presence of common anion from related degradation ***,the novel CG-FeCl_(2) is an efficient and environmentally friendly catalyst,displaying potential application prospect in the field of PAHs and phenol-contaminated wastewater treatment.

关键词： Coal gangue Persulfate activation Advanced oxidation processes Polycyclic aromatic hydrocarbons Phenol Ferrous chloride

Evolution mechanism and quantitative characterization of initial micro-cracks in marble under triaxial compression

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang university-Science A(Applied Physics & Engineering) 2024年第7期25卷 586-595页

作者： Zhiliang WANG Songyu LI Jianguo WANG Ao LI Weixiang WANG Chenchen FENG Jingjing FU School of Civil Engineering Hefei University of TechnologyHefei230009China School of Mechanics and Civil Engineering China University of Mining and TechnologyXuzhou221116China

The initial micro-cracks affect the evolution characteristics of macroscopic deformation and failure of rock but are often ignored in theoretical calculation,numerical simulation,and mechanical *** this study,we propose a quantitative analysis model to investigate the effects of initial micro-cracks on the evolution of marble deformation and *** relationship between the micro-crack propagation and the marble failure characteristics was comprehensively studied by combining theoretical analysis with a micro-computed tomography(micro-CT)scanning *** found that with the increase of confining pressure,the matrix elastic modulus of the marble first increased and then tended to be stable,while the micro-cracks increased *** sensitivity ranges of the marble sample matrix elastic modulus and micro-cracks to confining pressure were 0–30 MPa and 30–50 MPa,*** porosity and Poisson’s ratio decreased *** increasing proportion of internal micro-cracks led to an increase in the sample *** samples presented mainly shear failure under triaxial compression,and the failure angle decreased linearly with the increase of confining *** convergence direction of cracks decreased *** quantitative analysis model could accurately portray the relationship between the overall macroscopic deformation and the deviatoric stress of the samples at the compaction and the linear elastic stages,thus deepening the understanding of the stress–strain behavior of rocks.

关键词： Marble Initial micro-cracks Triaxial compression Constitutive relationship Crack evolution

Instability mechanism of mining roadway passing through fault at different angles in kilometre-deep mine and control measures of roof cutting and NPR cables

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第1期21卷 236-251页

作者： SUN Xiaoming WANG Jian ZHAO Wenchao MING Jiang ZHANG Yong LI Zhihu MIAO Chengyu GUO Zhibiao HE Manchao State Key Laboratory for Geomechanics and Deep Underground Engineering China University of Mining and Technology(Beijing)Beijing 100083China School of Mechanics and Civil Engineering China University of Mining and Technology(Beijing)Beijing 100083China

The angle α between the fault strike and the axial direction of the roadway produces different damage characteristics. In this paper, the research methodology includes theoretical analyses, numerical simulations and field experiments in the context of the Daqiang coal mine located in Shenyang, China. The stability control countermeasure of "pre-splitting cutting roof + NPR anchor cable"(PSCR-NPR) is simultaneously proposed. According to the different deformation characteristics of the roadway, the faults are innovatively classified into three types, with α of type I being 0°-30°, α of type II being 30°-60°, and α of type III being 60°-90°. The full-cycle stress evolution paths during mining roadway traverses across different types of faults are investigated by numerical simulation. Different pinch angles α lead to high stress concentration areas at different locations in the surrounding rock. The non-uniform stress field formed in the shallow surrounding rock is an important reason for the instability of the roadway. The pre-cracked cut top shifted the high stress region to the deep rock mass and formed a low stress region in the shallow rock mass. The high prestressing NPR anchor cable transforms the non-uniform stress field of the shallow surrounding rock into a uniform stress field. PSCR-NPR is applied in the fault-through roadway of Daqiang mine. The low stress area of the surrounding rock was enlarged by 3-7 times, and the cumulative convergence was reduced by 45%-50%. It provides a reference for the stability control of the deep fault-through mining roadway.

关键词： Kilometre-deep mine Fault mining roadway Failure mechanism Pre-splitting cutting roof High pre-stress NPR anchor cable

Gyroid Triply Periodic Minimal Surface Lattice Structure Enables Improved Superelasticity of CuAlMn Shape Memory Alloy

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1047-1065页

作者： Mengwei Wu Chunmei Ma Ruiping Liu Huadong Fu Department of Materials Science and Engineering China University of Mining and Technology(Beijing)Beijing100083China Institute for Advanced Materials and technology University of Science and Technology BeijingBeijing100083China

Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many *** work systematically investigates the effects of Gyroid triply periodic minimal surface(TPMS)lattice structures with different unit sizes and volume fractions on the manufacturing viability,compressive mechanical response,superelasticity and heating recovery properties of CuAlMn *** results show that the increased specific surface area of the lattice structure leads to increased powder adhesion,making the manufacturability proportional to the unit size and volume *** compressive response of the CuAlMn SMAs Gyroid TPMS lattice structure is negatively correlated with the unit size and positively correlated with the volume *** superelastic recovery of all CuAlMn SMAs with Gyroid TPMS lattice structures is within 5%when the cyclic cumulative strain is set to be 10%.The lattice structure shows the maximum superelasticity when the unit size is 3.00 mm and the volume fraction is 12%,and after heating recovery,the total recovery strain increases as the volume fraction *** study introduces a new strategy to enhance the superelastic properties and expand the applications of CuAlMn SMAs in soft robotics,medical equipment,aerospace and other fields.

关键词： Shape memory alloys Superelasticity Gyroid triply periodic minimal surface(TPMS)lattice structure Selective laser melting(SLM)

Mechanical responses of anchoring structure under triaxial cyclic loading

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 545-560页

作者： Peng Wang Nong Zhang Qun Wei Xingliang Xu Guangzhen Cui Aoran Li Sen Yang Jiaguang Kan State Key Laboratory of Coal Resources and Safe mining School of MinesChina University of Mining and TechnologyXuzhou221116China School of Civil Engineering Xuzhou University of TechnologyXuzhou221116China School of Mechanical Engineering Jiangsu University of TechnologyChangzhou213001China

Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and *** study develops an experimental device designed to test AS under triaxial *** device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress *** results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive *** bearing capacity decreases significantly when the anchorage direction is severely *** free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation ***,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity *** is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward *** cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway ***,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.

关键词： Triaxial stress Dynamic-static combination load Cyclic loading Anchoring structure(AS) Cumulative damage

Actively tuning anisotropic light-matter interaction in biaxial hyperbolic materialα-MoO_(3) using phase change material VO_(2) and graphene

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第4期33卷 631-638页

作者：周昆胡杨吴必园仲晓星吴小虎 School of Safety Engineering China University of Mining and TechnologyXuzhou 221116China Key Laboratory of Gas and Fire Control for Coal Mines China University of Mining and TechnologyXuzhou 221116China Shandong Institute of Advanced technology Jinan 250100China School of Power and Energy Northwestern Polytechnical UniversityXi'an 710072China

Anisotropic hyperbolic phonon polaritons(PhPs)in natural biaxial hyperbolic materialα-MoO_(3) has opened up new avenues for mid-infrared nanophotonics,while active tunability ofα-MoO_(3) PhPs is still an urgent problem necessarily to be *** this study,we present a theoretical demonstration of actively tuningα-MoO_(3) PhPs using phase change material VO_(2) and *** is observed thatα-MoO_(3) PhPs are greatly dependent on the propagation plane angle of *** insulator-to-metal phase transition of VO_(2) has a significant effect on the hybridization PhPs of theα-MoO_(3)/VO_(2) structure and allows to obtain actively tunableα-MoO_(3) PhPs,which is especially obvious when the propagation plane angle of PhPs is ***,when graphene surface plasmon sources are placed at the top or bottom ofα-MoO_(3) inα-MoO_(3)/VO_(2)structure,tunable coupled hyperbolic plasmon-phonon polaritons inside its Reststrahlen bands(RB s)and surface plasmonphonon polaritons outside its RBs can be *** addition,the above-mentionedα-MoO_(3)-based structures also lead to actively tunable anisotropic spontaneous emission(SE)*** study may be beneficial for realization of active tunability of both PhPs and SE ofα-MoO_(3),and facilitate a deeper understanding of the mechanisms of anisotropic light-matter interaction inα-MoO_(3) using functional materials.

关键词： light-matter interaction hyperbolic material phase change material graphene

Machine learning-assisted efficient design of Cu-based shape memory alloy with specific phase transition temperature

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 773-785页

作者： Mengwei Wu Wei Yong Cunqin Fu Chunmei Ma Ruiping Liu Department of Materials Science and Engineering China University of Mining&Technology(Beijing)Beijing 100083China Institute for Advanced Materials and technology University of Science and Technology BeijingBeijing 100083China

The martensitic transformation temperature is the basis for the application of shape memory alloys(SMAs),and the ability to quickly and accurately predict the transformation temperature of SMAs has very important practical *** this work,machine learning(ML)methods were utilized to accelerate the search for shape memory alloys with targeted properties(phase transition temperature).A group of component data was selected to design shape memory alloys using reverse design method from numerous unexplored *** modeling and feature modeling were used to predict the phase transition temperature of the shape memory *** experimental results of the shape memory alloys were obtained to verify the effectiveness of the support vector regression(SVR)*** results show that the machine learning model can obtain target materials more efficiently and pertinently,and realize the accurate and rapid design of shape memory alloys with specific target phase transition *** this basis,the relationship between phase transition temperature and material descriptors is analyzed,and it is proved that the key factors affecting the phase transition temperature of shape memory alloys are based on the strength of the bond energy between *** work provides new ideas for the controllable design and performance optimization of Cu-based shape memory alloys.

关键词： machine learning support vector regression shape memory alloys martensitic transformation temperature

Experimental investigation on coal pore-fracture variation and fractal characteristics synergistically affected by solvents for improving clean gas extraction

在线全文

学校读者我要写书评

暂无评论

International Journal of mining Science and technology 2024年第3期34卷 413-425页

作者： Feilin Han Sheng Xue Chunshan Zheng Zhongwei Chen Guofu Li Bingyou Jiang Key Laboratory of Safe and Effective Coal mining of Ministry of Education Anhui University of Science and TechnologyHuainan 232001China School of Safety Science and Engineering Anhui University of Science and TechnologyHuainan 232001China School of Mechanical and mining Engineering University of QueenslandQLD 4072Australia State Key Laboratory of Coal and Coalbed Methane Co-mining Jincheng 048012China

Chemical solvents instead of pure water being as hydraulic fracturing fluid could effectively increase permeability and improve clean methane extraction ***,pore-fracture variation features of lean coal synergistically affected by solvents have not been fully *** testing,nuclear magnetic resonance analysis,liquid phase mass spectrometry was adopted to comprehensively analyze pore-fracture change characteristics of lean coal treated by combined solvent(NMP and CS_(2)).Meanwhile,quantitative characterization of above changing properties was conducted using geometric fractal *** model between permeability,fractal dimension and porosity were *** indicate that the end face fractures of coal are well developed after CS2and combined solvent treatments,of which,end face box-counting fractal dimensions range from 1.1227 to *** decreases in ultrasonic longitudinal wave velocity of coal affected by NMP,CS_(2)and combined solvent are 2.700%,20.521%,22.454%,*** treatments could lead to increasing amount of both mesopores and *** ratio of fractal dimension Dsis 0.259%–2.159%,while permeability increases ratio of NMR ranges from 0.1904 to ***,combined solvent could dissolve coal polar and non-polar small molecules and expand flow *** could provide reference for solvent selection and parameter optimization of permeability-enhancement technology.

关键词： Clean gas extraction Chemical solvent Experimental investigation Fractal characteristics Pore fracture

Effect of Cryogenic Treatment on Microstructure and Tribological Property Evolution of Electron Beam Melted Ti6Al4V

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan university of technology(Materials Science) 2024年第4期39卷 1010-1017页

作者：黄西娜 MA Xiaowen XU Tianyi School of Mechanical and Electrical Engineering China University of Mining and Technology-BeijingBeijing 100083China School of Engineering and technology China University of GeosciencesBeijing 100083China

Cryogenic treatment was used to improve the tribological properties of Ti6Al4V artificial hip joint *** treatment at-196℃with different holding time were carried out on Ti6Al4V specimens fabricated using electron beam melting(EBM),and their microstructure and tribological properties evolution were systematically analyzed by scanning electron microscopy(SEM),vickers hardness,and wear *** experimental results show that the as-fabricated specimen consists of lamellarαphase andβcolumnar ***,the thickness of lamellarαphase decreased after cryogenic *** addition,it can be found that the fineαphase was precipitated and dispersed between the lamellarαphase with the holding time *** hardness shows a trend of first increasing and then *** wear rate of the specimen cryogenic treated for 24 h is the minimum and the average friction coefficient is 0.50,which is reduced by 14.61%compared with the *** wear mechanism of the as-fabricated specimen is severe exfoliation,adhesive,abrasive,and slight fatigue ***,the specimen cryogenic treated for 24 h shows slight adhesive and abrasive *** can be concluded that it is feasibility of utilizing cryogenic treatment to reduce the wear of EBMed Ti6Al4V.

关键词： electron beam melting(EBM) cryogenic treatment microstructure vickers hardness tribological property

Quasi-three-dimensional hydrodynamics of the corona region of laser irradiation of a slab

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第8期33卷 351-360页

作者：董晓梅关本金李英骏 State Key Laboratory for Tunnel Engineering China University of Mining and TechnologyBeijing 100083China

This paper introduces and establishes a quasi-three-dimensional physical model of the interaction between a laser and a slab *** contrast to previous one-dimensional analytical models,this paper innovatively fits the real laser conditions based on an isothermal,homogeneous expansion similarity solution of the ideal hydrodynamic *** this simple model,the evolution law and analytical formulae for key parameters(e.g.,temperature,density and scale length)in the corona region under certain conditions are *** analytical solutions agree well with the relevant results of computational hydrodynamics *** constant laser irradiation,the analytical solutions provide a meaningful power-law scaling *** model provides a set of mathematical and physical tools that give theoretical support for adjusting parameters in experiments.

关键词： plasma self-similarity method fluid dynamics calculations