检索结果-南通市图书馆

Energy Engineering 2024年第4期121卷 1007-1026页

作者： Zhuo Chen Ningning Wang Wenbo Jin Dui Li The Second Oil production Plant Sinopec Northwest Oilfield CompanyUrumqi830011China Yingmaili Oil and Gas production management Area PetroChina Tarim Oilfield CompanyKorla841001China College of Petroleum Engineering Xi’an Shiyou UniversityXi’an710065China

A hard problem that hinders the movement of waxy crude oil is wax deposition in oil *** ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil *** at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is *** validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil *** two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,***,it shows a higher prediction accuracy compared to the ENN prediction *** fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.

关键词： Waxy crude oil wax deposition rate chaotic map improved reptile search algorithm Elman neural network prediction accuracy

Prediction on Failure Pressure of Pipeline Containing Corrosion Defects Based on ISSA-BPNNModel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第3期121卷 821-834页

作者： Qi Zhuang Dong Liu Zhuo Chen PetroChina Changqing Oilfield company The Second Gas Production PlantXi’an710000China PetroChina Changqing Oilfield company Safety and Environmental Supervision Department Co.Ltd.Xi’an710000China Sinopec Northwest Oilfield company The Second Oil Production Plant Co.Ltd.Urumqi830016China

Oil and gas pipelines are affected by many factors,such as pipe wall thinning and pipeline *** prediction of failure pressure of oil and gas pipelines can provide technical support for pipeline safety *** at the shortcomings of the BP Neural Network(BPNN)model,such as low learning efficiency,sensitivity to initial weights,and easy falling into a local optimal state,an Improved Sparrow Search Algorithm(ISSA)is adopted to optimize the initial weights and thresholds of BPNN,and an ISSA-BPNN failure pressure prediction model for corroded pipelines is *** 61 sets of pipelines blasting test data as an example,the prediction model was built and predicted by MATLAB software,and compared with the BPNN model,GA-BPNN model,and SSA-BPNN *** results show that the MAPE of the ISSA-BPNN model is 3.4177%,and the R2 is 0.9880,both of which are superior to its comparison *** the ISSA-BPNN model has high prediction accuracy and stability,and can provide support for pipeline inspection and maintenance.

关键词： Oil and gas pipeline corrosion defect failure pressure prediction sparrow search algorithm BP neural network logistic chaotic map

Auto-tuning PVT data using multi-objective optimization: Application of NSGA-Ⅱ algorithm

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum 2024年第1期10卷 135-149页

作者： Abdolhadi Zarifi Mohammad Madani Mohammad Jafarzadegan Reservoir Engineering Systems Petroleum Engineering Department Main Office Building of National Iranian South Oil Company (NISOC) Combined Planning management National Iranian Oil Company (NIOC) Reservoir Engineering Division Petroleum Engineering Department Petroleum Engineering and Development Company (PEDEC)

Reservoir simulation is known as perhaps the most widely used, accurate, and reliable method for field development in the petroleum industry. An integral part of a reliable reservoir simulation process is to consider robust and rigorous tuned EOS models. Traditionally, EOS models are tuned iteratively through arduous workflows against experimental PVT data. However, this comes with a number of drawbacks such as forcingly using weight factors, which upon alteration adversely affects the optimization *** objective of the current work is thus to introduce an auto-tune PVT matching tool using NSGA-II multi-objective optimization. In order to illustrate the robustness of the presented technique, three different PVT samples are used, including two black-oil and one gas condensate sample. We utilize PengRobinson EOS during all the manual and auto-tuning processes. Comparison of auto-tuned EOS-generated results with those of experimental and computed statistical error values for these samples clearly show that the proposed method is robust. In addition, the proposed method, contrary to the manual matching process, provides the engineer with several matched solutions, which allows them to select a match based on the engineering background to be best amenable to the problem at hand. In addition, the proposed technique is fast, and can output several solutions within less time compared to the traditional manual matching method.

关键词： Auto-tuning PVT Equation of state NSGA-II Multi-objective optimization

The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第2期5卷 53-61页

作者： Qing Bian Jibiao Zhang Cheng Huang SINOPEC Petroleum Exploration and production Research Institute BeijingChina SINOPEC Northwest Oilfield company UrumuqiChina

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a *** this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian *** quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic *** decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

关键词： Tarim Basin Salt tectonics Strike-slip fault Structural analysis Seismic interpretation of decoupling zone

An approach of the internal friction-dependent temperature changes for conventional and pure biogenic lubricating greases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 780-795页

作者： Leif AHME Erik KUHN MiguelÁngel DELGADO department of Mechanical Engineering and production management Hamburg University of Applied SciencesHamburg 20099Germany department of Chemical Engineering Research in Product Technology and Chemical Processes(Pro2TecS)University of HuelvaHuelva 21071Spain

This work investigated the temperature changes inside the bulk of lubricating greases under controlled high-shear stress conditions(250-500 s-1).For this purpose,a newly developed temperature-measuring cell called Calidus was successfully *** temperature changes(ΔT)have been related to the greases'components(thickener,base oil-type,and composition)and the structural degradation of the lubricating ***,a theoretical approach was proposed for calculating the internal temperature change of lubricating greases during shear *** greases showed an internal temperature profile characterised by a sudden rise inΔT within the first 4 h from starting the test and subsequentΔT decay until it reaches the steady state ***,it was found that greases C1 and C5,formulated with lithium and calcium soap,respectively,with different soap content(16.1 wt%and 9.7 wt%,respectively),but the same base castor oil,showed the highest value of the maximumΔT,c.a.3.2 K,and the most drastic drop ofΔ*** greases showed both the highest specific densities and heat *** addition,they showed the lowest ratio of expended energies(Rtee),which means more structural degradation in the stressed *** the contrary,the grease C3,with 13 wt%of Li-soap but the lowest base oil's viscosity,showed the lowest maximumΔT and the temperature profile was characterised by a moderate variation ofΔT along the *** biogenic grease B3 developed a low-temperature change in the group of pure bio-genic greases close to grease C3.

关键词： shear-induced structural degradation rheology temperature measurements lubricating greases density lubricating greases specific heat capacities

Geochemical characteristics and exploration significance of ultra-deep Sinian oil and gas from Well Tashen 5,Tarim Basin,NW China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第1期5卷 24-36页

作者： Zicheng Cao Anlai Ma Qinqi Xu Quanyong Pan Kai Shang Fan Feng Yongli Liu Northwest Petroleum Oilfield company SINOPECUrumqi830011China Petroleum Exploration and production Research Institute SINOPEC102260BeijingChina

The Well Tashen 5(TS5),drilled and completed at a vertical depth of 9017 m in the Tabei Uplift of the Tarim Basin,NW China,is the deepest well in *** has been producing both oil and gas from the Sinian at a depth of 8780e8840 m,also the deepest in Asia in terms of oil *** this paper,the geochemical characteristics of Sinian oil and gas from the well were investigated and compared with those of Cambrian oil and gas discovered in the same *** oil samples,with Pr/Ph ratio of 0.78 and a whole oil carbon isotopic value of31.6‰,have geochemical characteristics similar to those of Ordovician oils from the No.1 fault in the North Shuntuoguole area(also named Shunbei area)and the Middle Cambrian oil from wells Zhongshen 1(ZS1)and Zhongshen 5(ZS5)of Tazhong *** maturity of light hydrocarbons,diamondoids and aromatic fractions all suggest an approximate maturity of 1.5%e1.7%Ro for the ***(4-+3-)methyldiamantane concentration of the samples is 113.5 mg/g,indicating intense cracking with a cracking degree of about 80%,which is consistent with the high bottom hole temperature(179℃).The Sinian gas samples are dry with a dryness coefficient of *** gas is a mixture of kerogen-cracking gas and oil-cracking gas and has Ro values ranging between 1.5%and 1.7%,and methane carbon isotopic values of41.6‰.Based on the equivalent vitrinite reflectance(R_(eqv)=1.51%e1.61%)and the thermal evolution of source rocks from the Cambrian Yu'ertusi Formation of the same well,it is proposed that the Sinian oil and gas be mainly sourced from the Cambrian Yu'ertusi Formation during the Himalayan period but probably also be joined by hydrocarbon of higher maturity that migrated from other source rocks in deeper *** discovery of Sinian oil and gas from Well TS5 suggests that the ancient ultra-deep strata in the northern Tarim Basin have the potential for finding volatile oil or condensate reservoirs.

关键词： Ultra-deep Sinian oil and gas Oil-cracking Well Tashen 5 Tarim Basin

Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1034-1046页

作者： Iman Ansarian Reza Taghiabadi Saeid Amini Mohammad Hossein Mosallanejad Luca Iuliano Abdollah Saboori department of Materials Science and Metallurgy Imam Khomeini International University(IKIU)QazvinIran department of Mechanical Engineering University of KashanKashanIran Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Multi-pass ultrasonic impact treatment(UIT)was applied to modify the microstructure and improve the mechanical and tribological characteristics at the near-surface region of commercially pure Ti(CP-Ti)specimens produced by the laser powder bed fusion(L-PBF)*** considerably refined the L-PBF process-related acicular martensites(α′-M)and produced a well-homogenized and dense surface microstructure,where the porosity content of 1-,3-,and 5-pass UITed samples was reduced by 43,60,and 67%,*** UITed samples showed an enhancement in their near-surface mechanical properties up to a depth of about 300μ*** nanoindentation results for the 3-pass UITed sample revealed an increase of about 53,45,and 220%in its nanohardness,H/E_(r),and H_(3)/E_(r)^(2)indices,*** stylus profilometry results showed that performing the UIT removed the L-PBF-related features/defects and offered a smooth *** roughness average(R_(a))and the skewness(R_(sk))of the 3-pass UITed sample were found to be lower than those of the L-PBFed sample by 95 and 223%,*** the UIT also enhanced the material ratio,where the maximum load-bearing capacity(~100%)in as-L-PBFed(as-built)and 3-pass UITed samples was obtained at 60-and 10-µm depths,*** tribological investigations showed that applying the UIT resulted in a significant reduction of wear rate and average coefficient of friction(COF)of *** instance,under the normal pressures of 0.05 and 0.2 MPa,the wear rate and COF of the 3-pass UITed sample were lower than those of the L-PBFed sample by 65 and 58%,and 20 and 17%,respectively.

关键词： Laser powder bed fusion Ultrasonic impact treatment Commercially pure Ti(CP-Ti) Surface mechanical properties Tribological properties

Effect of fracture fluid flowback on shale microfractures using CT scanning

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 426-436页

作者： Jiale He Zhihong Zhao Yiran Geng Yuping Chen Jianchun Guo Cong Lu Shouyi Wang Xueliang Han Jun Zhang State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an710049China Drilling Test Engineering department of Longdong Oil and Gas Development company Changqing OilfieldPetroChina Company LimitedQingyang745000China Tight Oil and Gas Exploration and Development Project department PetroChina Southwest Oil and Gas Field CompanyChengdu610056China No.11 Oil production Plant Changqing Oilfield CompanyPetroChina Company LimitedQingyang745000China

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional *** the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not *** this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is ***,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface *** flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

关键词： Shale Flowback of fracturing fluid Microfracture Lattice Boltzmann method(LBM)

The Lambert-G Family:Properties,Inference,and Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第7期140卷 513-536页

作者： Jamal N.Al Abbasi Ahmed Z.Afify Badr Alnssyan Mustafa S.Shama Accounting department Ashur UniversityBaghdad10011Iraq department of Statistics Mathematics and InsuranceBenha UniversityBenha13511Egypt department of management Information Systems and production management College of Business and EconomicsQassim UniversityBuraydah51452Saudi Arabia department of Basic Sciences Common First Year(CFY)King Saud UniversityRiyadh11362Saudi Arabia department of Mathematics and Statistics Osim Higher Institute of Administrative ScienceOsim12961Egypt

This study proposes a new flexible family of distributions called the Lambert-G *** Lambert family is very flexible and exhibits desirable *** three-parameter special sub-models provide all significantmonotonic and non-monotonic failure rates.A special sub-model of the Lambert family called the Lambert-Lomax(LL)distribution is *** expressions for the LL statistical properties are *** of the LL distribution are addressed mathematically based on its hazard *** estimation of the LL parameters is discussed using six estimation *** performance of this estimation method is explored through simulation *** usefulness and flexibility of the LL distribution are demonstrated empirically using two real-life data *** LL model better fits the exponentiated Lomax,inverse power Lomax,Lomax-Rayleigh,power Lomax,and Lomax distributions.

关键词： Lambert function Lomax distribution maximum likelihood hazard function statistical model simulation

Effect of Preparations of Bamboo Vinegar and Copper Sulfate on Green Algae and tobacco Seedling Growth

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian Agricultural Research 2017年第6期9卷 89-91,95页

作者： Tingqing WANG Lingjie XU Qianhua YUAN Xiuhai ZHANG Weiqian ZHONG Kun QIU Chuanren MA tobacco production and management department of qiandongnan tobacco company Cengong Branch of qiandongnan tobacco company

To provide theoretical and technical basis for the application of preparations of bamboo vinegar and copper sulfate in the prevention of green algae in floating system for tobacco seeding,the soaking and spraying methods were employed to study the effect of different concentrations of preparations of bamboo vinegar and copper sulfate on green algae and tobacco seedling growth. The results showed that the preparations of bamboo vinegar and copper sulfate of different concentrations played a strong role in inhibiting green algae growth and had better effect than copper sulfate. Spraying 1∶ 200 preparations of bamboo vinegar and copper sulfate could significantly promote tobacco seedling growth,and the leaf fresh weight increased by 15. 80% compared with CK,with significant difference; spraying 1∶ 50 preparations was not conducive to tobacco seedling growth. It was recommended to spray 1∶ 200 preparations of bamboo vinegar and copper sulfate in floating system for tobacco seeding,which could promote tobacco seedling growth and reduce green algae to varying degrees.

关键词： Preparations of bamboo vinegar and copper sulfate Green algae tobacco seedlings Agronomic traits Fresh matter