检索结果-南通市图书馆

Development and performance evaluation of high temperature resistant strong adsorption rigid blocking agent

Petroleum Science 2024年第4期21卷 2650-2662页

作者： Zhe Xu Jin-Sheng Sun Jing-Ping Liu Kai-He Lv Xiao-Dong Dong Zong-Lun Wang Tai-Feng Zhang Yuan-Wei Sun Zhi-Wen Dai School of Petroleum engineering China University of Petroleum (East China) CNPC engineering Technology R&D Company limited

As drilling wells continue to move into deep ultra-deep layers, the requirements for temperature resistance of drilling fluid treatments are getting higher and higher. Among them, blocking agent, as one of the key treatment agents, has also become a hot spot of research. In this study, a high temperature resistant strong adsorption rigid blocking agent(QW-1) was prepared using KH570 modified silica,acrylamide(AM) and allyltrimethylammonium chloride(TMAAC). QW-1 has good thermal stability,average particle size of 1.46 μm, water contact angle of 10.5., has a strong hydrophilicity, can be well dispersed in water. The experimental results showed that when 2 wt% QW-1 was added to recipe A(4 wt% bentonite slurry+0.5 wt% DSP-1(filtration loss depressant)), the API filtration loss decreased from 7.8to 6.4 m L. After aging at 240.C, the API loss of filtration was reduced from 21 to 14 m L, which has certain performance of high temperature loss of filtration. At the same time, it is effective in sealing 80-100mesh and 100-120 mesh sand beds as well as 3 and 5 μm ceramic sand discs. Under the same conditions,the blocking performance was superior to silica(5 μm) and calcium carbonate(2.6 μm). In addition, the mechanism of action of QW-1 was further investigated. The results show that QW-1 with amide and quaternary ammonium groups on the molecular chain can be adsorbed onto the surface of clay particles through hydrogen bonding and electrostatic interaction to form a dense blocking layer, thus preventing further intrusion of drilling fluid into the formation.

关键词： High adsorption Rigid microsphere High temperature resistance Blocking performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Novel ISSA–DELM Model for Predicting Rock Mass Permeability

引用

Computer Modeling in engineering & Sciences 2024年第9期140卷 2825-2848页

作者： Chen Xing Leihua Yao Yingdong Wang School of engineering and Technology China University of Geosciences(Beijing)Beijing100083China Beijing engineering Corporation limited Beijing100024China

In pumped storage projects,the permeability of rock masses is a crucial parameter in engineering design and *** rock mass permeability coefficient(K)is influenced by various geological parameters,and previous studies aimed to establish an accurate relationship between K and geological *** study uses the improved sparrow search algorithm(ISSA)to optimize the parameter settings of the deep extreme learning machine(DELM),constructing a prediction model with flexible parameter selection and high ***,the Spearman method is applied to analyze the correlation between geological parameters.A sample database is built by comprehensively selecting four geological indexes:burial depth,rock quality designation(RQD),fracture density characteristic index(FD),and rock mass integrity designation(RID).Hence,the defects of the sparrow search algorithm(SSA)are enhanced using the improved strategy,and the initial input weights of the DELM are ***,the proposed ISSA–DELM model is employed to predict the permeability coefficient of rock mass in the entire study *** results showed that the predictive performance of the model is superior to that of the DELM and SSA–***,this model successfully provides insights into the distribution characteristics of rock mass permeability at engineering sites.

关键词： ISSA DELM rock mass permeability coefficient geological parameter correlation analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-efficiency ultrasonic assisted drilling of CFRP/Ti stacks under non-separation type and dry conditions

引用

Journal of Zhejiang University-Science A(Applied Physics & engineering) 2024年第4期25卷 275-291页

作者： Enze YING Zehua ZHOU Daxi GENG Zhenyu SHAO Zhefei SUN Yihang LIU Lianxing LIU Xinggang JIANG Deyuan ZHANG School of Mechanical engineering and Automation Beihang UniversityBeijing 100191China Beijing Chenjing Electronics Company limited Beijing 100015China Aerospace Times Feihong Technology Company limited Beijing 100094China

In this study,to address the low efficiency for conventional ultrasonic-assisted drlling(UAD)of carbon fiber-reinforced plastic and titanium alloy(CFRP/Ti)stacks,feasibility experiments of non-separation UAD,in which continuous cutting between the tool and the workpiece occurs at a high feed rate,are carried *** experimental results indicate that,compared to conventional separation UAD,the non-separation UAD effectively reduces the cutting forces by 24.2%and 1.9%for CFRP stage and 22.1%and 2.6%for the Ti stage at the feed rates of 50 and 70μm/r,***,the non-separation UAD significantly improves hole quality,including higher hole diameter accuracy,lower hole surface roughness,and less hole *** addition,the non-separation UAD can decrease adhesive tool *** study demonstrates that,compared to conventional drilling(CD),the non-separation UAD can effectively improve drilling quality and tool life while maintaining high efficiency.

关键词： Carbon fiber-reinforced plastic and titanium alloy(CFRP/Ti)stacks Ultrasonic-assisted drlling(UAD) Cutting force Surface integrity Tool wear

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Investigation of cracking mechanism of the first tunnel lining during double-arch tunnel construction

引用

Underground Space 2024年第1期14卷 1-17页

作者： Yi Sui Xiaohui Cheng Zuozhou Zhao Weibin Ma Railway engineering Research Institute China Academy of Railway Sciences Corporation LimitedBeijing 100081China School of Civil engineering Tsinghua UniversityBeijing 100084China

To solve the engineering problem of the first tunnel lining cracking caused by the second tunnel construction of double-arch highway tunnels,a research method combining distributed optical-fibre monitoring,inversion analysis and numerical simulation that can reflect lining cracking was *** fibres were laid on opposite sides of the steel arches inside the first tunnel *** optical-fibre monitoring was conducted continuously during the second tunnel *** on the fibre-optic strain profile,the lining cracking was deduced and warned in *** mechanical behaviour of the steel arch was investigated by the inversion analysis,which took into consideration the integrated impact of axial force and flexural moment.A two-dimensional(2D)load-structure method–based numerical model was established,considering the influence of different load distributions in each construction *** total strain rotating crack constitutive model was applied to reflect the cracking behaviour of concrete lining in the simulation,and the model was calibrated and verified in the *** analysis between the simulated strain distribution and the distributed optical-fibre monitoring results was carried *** deformation mode and crack distribution of the lining were *** cracking mechanism was ***,the second tunnel construction led to the loading at the top of the middle partition wall and the release of rock pressure in the first *** these load changes,the secondary lining of the first tunnel cracked on the inner side of the top of the middle partition wall owing to tension,and compression-bending failure occurred near the right arch ***,the influence of the parameters on the lining force was analysed,and a construction optimisation scheme was proposed.

关键词： Double-arch tunnel Cracking mechanism Distributed optical-fibre sensing Inversion analysis Total strain rotating crack model Loadstructure method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Natural rubber latex as a potential additive for water-based drilling fluids

引用

Petroleum Science 2024年第4期21卷 2677-2687页

作者： Jun Yang Guan-Cheng Jiang Jing-Tian Yi Yin-Bo He Li-Li Yang Teng-Fei Dong Guo-Shuai Wang College of Petroleum engineering China University of Petroleum (Beijing) National engineering Research Center of Oil & Gas Drilling and Completion Technology Changqing Drilling General Company CNPC Chuanqing Drilling Engineering Company Limited

The environmental hazards and "carbon footprint" of oil and gas drilling can be significantly reduced by replacing traditional petroleum-based chemical additives with natural materials derived from plants and animals. This paper explored for the first time the interaction mechanism between natural rubber latex(NRL) and bentonite suspensions(BTs) through a series of characterization experiments, as well as the potential applications in water-based drilling fluids(WBDF). The gel viscoelasticity experiments showed that NRL could decrease the consistency coefficient(k) and flow index(n) of BTs, and enhance the shear thinning performance of BTs as pseudo-plastic fluids. In addition, 0.5 w/v% NRL not only increased the critical yield stress and strengthened the structural strength between the bentonite particles, but also facilitated the compatibility of pressure loss and flow efficiency. The evaluation of colloidal stability and WBDF performance indicated that NRL particles could promote the hydration and charge stability on the surface of BTs particles, and optimize the particle size distribution and flow resistance of WBDF under the "intercalation-exfoliation-encapsulation" synergistic interaction. Moreover, NRL can improve the rheological properties of WBDF at high temperatures(<150.C), and form a dense blocking layer by bridging and sealing the pores and cracks of the filter cake, which ultimately reduces the permeability of the cake and the filtration loss of WBDF.

关键词： Natural materials Water-based drilling fluids Natural rubber latex Bentonite suspensions Filtration loss

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Three-dimensional hydro-mechanical coupling numerical simulation of shield-driven cross-river twin tunnels:A case study

引用

Underground Space 2024年第3期16卷 106-125页

作者： Chengwen Wang Xiaoli Liu Danqing Song Enzhi Wang Guohui Yan Ran Zhou Department of Hydraulic engineering State Key Laboratory of Hydroscience and EngineeringTsinghua UniversityBeijing 100084China YSD Rail Transit Construction Company limited Guangzhou 510630China

With the rapid development of urban underground space,the construction of shield-driven cross-river twin tunnels is increasing,and the complex hydro-mechanical coupling effects and twin-tunnel interactions bring huge construction risks to such projects,which have attracted more and more *** study aims to understand the excavation effects induced by shield driving of cross-river twin tunnels through numerical simulation.A refined three-dimensional numerical model based on the fully coupled hydro-mechanical theory is *** model considers the main components of the slurry pressure balance shield(SPBS)machine,including support force,jacking thrust,grouting pressure,shield-rock interaction and lining-grouting interaction,as well as the detailed construction *** purpose is to examine the excavation effects during construction,including rock deformation around tunnels,the change in pore pressure,and the response of the *** results show the influence range of twin-tunnel excavation on rock deformation and pore pressure,as well as the modes of lining *** addition,this study also systematically investigates the effects of water level fluctuation and burial depth on twin-tunnel *** results indicate that the increase of water level or burial depth will enhance the excavation effects and strengthen the twin-tunnel *** results provide useful insights for estimating the construction impact range and degree of twin tunnels,and serve as basic references for the design of cross-river twin tunnels.

关键词： Numerical modeling Twin tunnels Crossing river Hydro-mechanical coupling Lining response

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thickening progression mechanism of silica fume-oil well cement composite system at high temperatures

引用

Petroleum Science 2024年第4期21卷 2793-2805页

作者： Hang Zhang Miao-Miao Hu Peng-Peng Li Guo-Qing Liu Qing-Lu Chang Jie Cao Ming Liu Wen-Hua Xu Xiu-Jian Xia Jin-Tang Guo School of Chemical engineering and Technology Tianjin University Zhejiang Institute of Tianjin University Haihe Laboratory of Sustainable Chemical Transformations CNPC engineering Technology R&D Company limited

This work studied the thickening progression mechanism of the silica fume-oil well cement composite system at high temperatures(110-180.C) in order to provide a theoretical guidance for the rational application of silica fume in the cementing engineering. Results showed that silica fume seldom affected the thickening progression of oil well cement slurry at 110-120.C, but when temperature reached above130.C, it would aggravate the bulging degree of thickening curves and significantly extend the thickening time, meanwhile causing the abnormal “temperature-based thickening time reversal” and“dosage-based thickening time reversal” phenomena in the range of 130-160.C and 170-180.C respectively. At 130-160.C, the thickening time of oil well cement slurry was mainly associated with the generation rate of calcium hydroxide(CH) crystal. The introduced silica fume would be attracted to the cement minerals' surface that were hydrating to produce CH and agglomerate together to form an“adsorptive barrier” to hinder further hydration of the inner cement minerals. This “adsorptive barrier”effect strengthened with the rising temperature which extended the thickening time and caused the occurrence of the “temperature-based thickening time reversal” phenomenon. At 170-180.C, the pozzolanic activity of silica fume significantly enhanced and considerable amount of C-S-H was generated, thus the “temperature-based thickening time reversal” vanished and the “dosage-based thickening time reversal” was presented.

关键词： Silica fume Oil well cement Thickening time reversal Pozzolanic reaction Adsorptive barrier CH and C−S−H

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Development of a DFN-based probabilistic block theory approach for bench face angle design in open pit mining

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第8期16卷 3047-3062页

作者： Jianhua Yan Xiansen Xing Zhihai Li Weida Ni Liuyuan Zhao Chun Zhu Yuanyuan He School of Earth Sciences and engineering Hohai UniversityNanjing210098China POWERCHINA Huadong engineering Corporation limited Hangzhou311122China Zhejiang Huadong Construction Corporation limited Hangzhou310004China The Seventh Geological Brigade of Hubei Geological Bureau Yichang443000China

In open pit mining,uncontrolled block instabilities have serious social,economic and regulatory consequences,such as casualties,disruption of operation and increased regulation *** this reason,bench face angle,as one of the controlling parameters associated with block instabilities,should be carefully designed for sustainable *** study introduces a discrete fracture network(DFN)-based probabilistic block theory approach for the fast design of the bench face angle.A major advantage is the explicit incorporation of discontinuity size and spatial distribution in the procedure of key blocks *** proposed approach was applied to a granite mine in ***,DFN models were generated from a multi-step modeling procedure to simulate the complex structural characteristics of pit ***,a modified key blocks searching method was applied to the slope faces modeled,and a cumulative probability of failure was obtained for each ***,a bench face angle was determined commensurate with an acceptable risk level of *** simulation results have shown that the number of hazardous traces exposed on the slope face can be significantly reduced when the suggested bench face angle is adopted,indicating an extremely low risk of uncontrolled block instabilities.

关键词： Open pit mine Bench face angle Block theory Probabilistic approach Discrete fracture network modeling Fractured rock slope

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthetic polymers:A review of applications in drilling fluids

引用

Petroleum Science 2024年第1期21卷 475-518页

作者： Shadfar Davoodi Mohammed Al-Shargabi David A.Wood Valeriy S.Rukavishnikov Konstantin M.Minaev School of Earth Sciences&engineering Tomsk Polytechnic UniversityLenin AvenueTomskRussia DWA Energy limited LincolnUnited Kingdom

With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various ***,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling ***,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization *** provide substantial flexibility in their ***,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling *** can be classified based on chemical ingredients,type of reaction,and their responses to ***,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep ***,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling *** contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in *** mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also *** typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also *** issues also impact the applications of SPs in drilling ***,the cost of the most relevant SPs,and the monomers used in their synthesis,are *** impacts of SPs when deployed in drilling fluids,and t

关键词： Synthetic versus natural polymers Nanopolymers Drilling fluid additives Lubricity Clay swelling Hole cleaning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Parameter Estimation of Sub-/Super-synchronous Oscillation Based on Interpolated All-phase Fast Fourier Transform with Optimized Window Function

引用

Journal of Modern Power Systems and Clean Energy 2024年第4期12卷 1031-1041页

作者： Bo Sun Xi Wu Xi Chen Zixiao Zou Qiang Li Bixing Ren School of Electrical engineering Southeast UniversityNanjingChina State Grid Jiangsu Electric Power Company limited Research Institute NanjingChina

In recent years,with increasing amounts of renew-able energy sources connecting to power grids,sub-/super-syn-chronous oscillations(SSOs)occurred more *** to the time-variant nature of SsO magnitudes and frequencies,as well as the mutual interferences among SsO modes with close frequencies,the accurate parameter estimation of SsO has be-come a particularly challenging *** solve this issue,this paper proposes an improved spectrum analysis method by im-proving the window function and a spectrum correction method to achieve higher ***,by aiming at the sidelobe characteristics of the window function as evaluation criteria,a combined cosine function is optimized using a genetic algorithm(GA).Furthermore,the obtained window function is self-con-volved to extend its excellent characteristics,which have better performance in reducing mutual interference from other SSO ***,a new form of interpolated all-phase fast Fourier transform(IpApFFT)using the optimized window func-tion is proposed to estimate the parameters of *** meth-od allows for phase-unbiased estimation while maintaining algo-rithmic simplicity and *** performance of the pro-posed method is demonstrated under various conditions,com-pared with other estimation *** results vali-date the effectiveness and superiority of the proposed method.

关键词： Sub-/Super-synchronous oscillation(SSO) window function parameter estimation interpolated all-phase fast Fourier transform(ApFFT)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：