检索结果-南通市图书馆

Enrichment of anammox biomass during mainstream wastewater treatment driven by achievement of partial denitrification through the addition of bio-carriers

引用

Journal of Environmental Sciences 2024年第3期137卷 181-194页

作者： Yuqing Ma Bo Wang Xiaodi Li Shuo Wang Wen Wang Yongzhen Peng national engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse technology Engineering Research Center of BeijingBeijing University of TechnologyBeijing 100124China

Anammox is widely considered as the most cost-effective and sustainable process for nitrogen removal.However,how to achieve the enrichment of anammox biomass remains a challenge for its large-scale application,especially in mainstream wastewater treatment.In this study,the feasibility of enrichment of anammox biomass was explored through the realization of partial denitrification and the addition of bio-carriers.By using ordinary activated sludge,a sequencing batch reactor(SBR)followed by an up-fow anaerobic sludge bed(UASB)was operated at 25±2℃ for 214 days.The long-term operation was divided into five phases,in which SBR and UASB were started-up in Phases I and II,respectively.By eliminating oxygen and adjusting the infow ratios in Phases III-V,advanced nitrogen removal was achieved with the effuent total nitrogen being 4.7 mg/L and the nitrogen removal efficiency being 90.5%in Phase V.Both in-situ and ex-situ activity tests demonstrated the occurrence of partial denitrification and anammox.Moreover,16S rRNA high-throughput sequencing analysis revealed that Candidatus Brocadia was enriched from below the detection limit to in biofilms(0.4%in SBR,2.2%in UASB)and the foc sludge(0.2%in SBR,1.3%in UASB),while Thauera was mainly detected in the foc sludge(8.1%in SBR,8.8%in UASB),which might play a key role in partial denitrification.Overall,this study provides a novel strategy to enrich anammox biomass driven by rapid achievement of partial denitrification through the addition of bio-carriers,which will improve large-scale application of anammox processes in mainstream wastewater treatment.

关键词： Enrichment Anammox biomass Bio-carriers Partial denitrification Mainstream wastewater

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent progress in functional modification and crosslinking of bioprosthetic heart valves

引用

Regenerative Biomaterials 2024年第1期3卷 1-16页

作者： Cheng Zheng Li Yang Yunbing Wang national engineering research center for Biomaterials Sichuan UniversityChengdu 610064China

Valvular heart disease(VHD),clinically manifested as stenosis and regurgitation of native heart valve,is one of the most prevalent cardiovascular diseases with high mortality.Heart valve replacement surgery has been recognized as golden standard for the treatment of VHD.Owing to the clinical application of transcatheter heart valve replacement technic and the excellent hemodynamic performance of bioprosthetic heart valves(BHVs),implantation of BHVs has been increasing over recent years and gradually became the preferred choice for the treatment of VHD.However,BHVs might fail within 10-15 years due to structural valvular degeneration(SVD),which was greatly associated with drawbacks of glutaraldehyde crosslinked BHVs,including cytotoxicity,calcification,component degradation,mechanical failure,thrombosis and immune response.To prolong the service life of BHVs,much effort has been devoted to overcoming the drawbacks of BHVs and reducing the risk of SVD.In this review,we summarized and analyzed the research and progress on:(i)modification strategies based on glutaraldehyde crosslinked BHVs and(ii)nonglutaraldehyde crosslinking strategies for BHVs.

关键词： bioprosthetic heart valves modification crosslinking anticalcification antithrombosis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Near-field wideband beam training for ELAA with uniform circular array

引用

Science China(Information Sciences) 2024年第6期67卷 370-383页

作者： Yuhao CHEN Linglong DAI Department of Electronic engineering Tsinghua UniversityBeijing National Research Center for Information Science and Technology (BNRist)

Extremely large-scale antenna array(ELAA) at millimeter wave(mmWave) and Terahertz(THz)band has been considered a key technology for combating high attenuation in high-frequency bands in future6G communications. Uniform circular arrays(UCAs) have attracted much attention because of their ability to provide flat beamforming gain at all angles. To realize efficient beamforming, beam training is widely used to acquire channel state information. However, with a large antenna number, the beam training overhead in ELAA systems becomes overwhelming. Moreover, with a large bandwidth, the beam defocus effect severely degrades beam training accuracy. To address these issues, this paper proposes a frequency-dependent focusing(FDF)-based beam training scheme to realize effective beam training in near-field wideband ELAA systems with UCA. Specifically, we first analyze the FDF property of UCA, where signals at different subcarriers can simultaneously focus on different distances. Then, by exploiting the FDF property to search different distances using different subcarriers simultaneously, we design a hierarchical codebook and propose an FDFbased beam training scheme. To reveal the effectiveness of the proposed scheme, we compare its necessary beam training overhead with that of existing schemes. Finally, the simulation results demonstrate that the proposed scheme can achieve accurate beam training in near-field wideband UCA systems with a low beam training overhead.

关键词： extremely large-scale antenna array (ELAA) uniform circular array (UCA) near-field wideband beam training

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

引用

Nano-Micro Letters 2024年第8期16卷 268-308页

作者： Yiding Li Li Wang Youzhi Song Wenwei Wang Cheng Lin Xiangming He Institute of Nuclear and New Energy technology Tsinghua UniversityBeijing 100084People’s Republic of China national engineering research center of Electric Vehicles Beijing Institute of Technology(BIT)Beijing 100081People’s Republic of China Shenzhen Automotive research Institute of BIT(Shenzhen research Institute of national engineering research center of Electric Vehicles) Shenzhen 518118People’s Republic of China

The battery technology progress has been a contradictory process in which performance improvement and hidden risks coexist.Now the battery is still a“black box”,thus requiring a deep understanding of its internal state.The battery should“sense its internal physical/chemical conditions”,which puts strict requirements on embedded sensing parts.This paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed,focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition,electrolyte degradation,electrode-electrolyte interface dynamics to three-dimensional macro-safety evolution.The paper contributes to understanding how to use optical fiber sensors to achieve“real”and“embedded”monitoring.Through the inherent advantages of the advanced optical fiber sensor,it helps clarify the battery internal state and reaction mechanism,aiding in the establishment of more detailed models.These advancements can promote the development of smart batteries,with significant importance lying in essentially promoting the improvement of system consistency.Furthermore,with the help of smart batteries in the future,the importance of consistency can be weakened or even eliminated.The application of advanced optical fiber sensors helps comprehensively improve the battery quality,reliability,and life.

关键词： Smart battery Advanced embedded optical fiber sensor Battery internal physical/chemical state Quality-reliability-life characteristic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dragonfly Interaction Algorithm for Optimization of Queuing Delay in Industrial Wireless Networks

引用

Journal of Bionic engineering 2024年第1期21卷 447-485页

作者： Sanjay Bhardwaj Da-Hye Kim Dong-Seong Kim Department of IT Convergence engineering ICT Convergence Research CenterKumoh National Institute of TechnologyGumiSouth Korea

In industrial wireless networks,data transmitted from source to destination are highly repetitive.This often leads to the queuing of the data,and poor management of the queued data results in excessive delays,increased energy consumption,and packet loss.Therefore,a nature-inspired-based Dragonfly Interaction Optimization Algorithm(DMOA)is proposed for optimization of the queue delay in industrial wireless networks.The term“interaction”herein used is the characterization of the“flying movement”of the dragonfly towards damselflies(female dragonflies)for mating.As a result,interaction is represented as the flow of transmitted data packets,or traffic,from the source to the base station.This includes each and every feature of dragonfly movement as well as awareness of the rival dragonflies,predators,and damselflies for the desired optimization of the queue delay.These features are juxtaposed as noise and interference,which are further used in the calculation of industrial wireless metrics:latency,error rate(reliability),throughput,energy efficiency,and fairness for the optimization of the queue delay.Statistical analysis,convergence analysis,the Wilcoxon test,the Friedman test,and the classical as well as the 2014 IEEE Congress of Evolutionary Computation(CEC)on the benchmark functions are also used for the evaluation of DMOA in terms of its robustness and efficiency.The results demonstrate the robustness of the proposed algorithm for both classical and benchmarking functions of the IEEE CEC 2014.Furthermore,the accuracy and efficacy of DMOA were demonstrated by means of the convergence rate,Wilcoxon testing,and ANOVA.Moreover,fairness using Jain’s index in queue delay optimization in terms of throughput and latency,along with computational complexity,is also evaluated and compared with other algorithms.Simulation results show that DMOA exceeds other bio-inspired optimization algorithms in terms of fairness in queue delay management and average packet loss.The proposed algorithm is also evaluated for the conflicting o

关键词： Dragonfly Damselfly Interaction Queuing delay Optimization Industrial wireless networks

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation center for Materials Genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China national engineering research center for Advanced Rolling technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel

引用

Journal of Iron and Steel research(International) 2024年第3期31卷 688-699页

作者： Wen-quan Sun Sheng-yi Yong Tie-heng Yuan Ting-song Yang An-rui He Chao Liu Rui-chun Guo national engineering research center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 100083China

The slow phase transformation of microalloyed dual phase steel makes the nonuniform stress and temperature fields during the post rolling cooling process have a significant impact on the phase transformation process.Given the relatively slow phase transformation of DP780 steel within the microalloyed dual phase steel series,the influence of stress on the phase transformation behavior of DP780 steel was investigated.To quantify the nonuniform thermal and stress conditions in the steel coil,a thermo-mechanical coupled finite element model of the hot-rolled strip cooling process was established.Based on the simulation data,DP780 steel was chosen as the research material,and Gleeble 3500 thermal simulation equipment was used for experimental validation.The thermal expansion curves were analyzed through regression to establish the dynamic model of DP780 steel phase transformation under stress.Subsequently,metallographic analysis was conducted to determine phase transformation type and grain size of DP780 steel.The results confirmed that the stress promotes the occurrence of semi-diffusion-type bainite transformation.Furthermore,an appropriate level of stress facilitates the growth of bainitic grains,while the increased stress inhibits the growth of ferritic grains.

关键词： Microalloyed dual phase steel Stress Bainitic transformation Grain Finite element method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

引用

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook Kim Yunho Kim Jiwoong Yang Moon Kee Choi Graduate School of Semiconductor Materials and Devices engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Science and engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy Science and engineering research center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Materials Science and engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea center for Nanoparticle research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution processability.Despite recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color displays.To integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous efficiency.Herein,we present state-of-the-art patterning technologies for the development of full-color PeLEDs.First,we highlight recent advances in the development of efficient PeLEDs.Second,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated displays.These patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite nanocrystals.This review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of syngas components and ash particles on the radiative heat transfer in a radiant syngas cooler

引用

Chinese Journal of Chemical engineering 2024年第4期68卷 203-215页

作者： Chen Han Youmin Situ Huaxing Zhu Jianliang Xu Zhenghua Dai Guangsuo Yu Haifeng Liu national Energy Coal Gasification technology research and Development center East China University of Science and TechnologyShanghai 200237China Shanghai engineering research center of Coal Gasification East China University of Science and TechnologyShanghai 200237China

Radiant syngas cooler(RSC)is widely used as a waste heat recovery equipment in industrial gasification.In this work,an RSC with radiation screens is established and the impact of gaseous radiative property models,gas components,and ash particles on heat transfer is investigated by the numerical simulation method.Considering the syngas components and the pressure environment of the RSC,a modified weighted-sum-of-gray-gases model was developed.The modified model shows high accuracy in validation.In computational fluid dynamics simulation,the calculated steam production is only 0.63%in error with the industrial data.Compared with Smith's model,the temperature decay along the axial direction calculated by the modified model is faster.Syngas components are of great significance to heat recovery capacity,especially when the absorbing gas fraction is less than 10%.After considering the influence of particles,the outlet temperature and the proportion of radiative heat transfer are less affected,but the difference in steam output reaches 2.7 t·h^(-1).The particle deposition on the wall greatly reduces the heat recovery performance of an RSC.

关键词： Radiant syngas cooler Weighted-sum-of-gray-gases model Numerical simulation Particle radiation

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Factors hindering the degradation of pharmaceuticals from human urine in an iron-activated persulfate system

引用

Journal of Environmental Sciences 2024年第1期135卷 130-148页

作者： Yiruiwen Xie Dao Guan Yangfan Deng Yugo Sato Yu Luo Guanghao Chen Department of Civil and Environmental engineering Water Technology LabHong Kong Branch of Chinese National Engineering Research Center for Control&Treatment of Heavy Metal PollutionThe Hong Kong University of Science&TechnologyHong Kong 999077China

This study investigated the degradation of clofibric acid(CFA),bezafibrate(BZF),and sulfamethoxazole(SMX)in synthetic human urine using a novel mesoporous iron powderactivated persulfate system(mFe-PS system),and identified the factors limiting their degradation in synthetic human urine.A kinetic model was established to expose the radical production in various reaction conditions,and experiments were conducted to verify the modeling results.In the phosphate-containing mFe-PS system,the 120 min removal efficiency of CFA decreased from 95.1%to 76.6%as the phosphate concentration increased from 0.32 to 6.45 mmol/L,but recovered to 90.5%when phosphate concentration increased to 16.10 mmol/L.Meanwhile,the increased concentration of phosphate from 0.32 to 16.10mmol/L reduced the BZF degradation efficacy from 91.5%to 79.0%,whereas SMX removal improved from 37.3%to 62.9%.The m Fe-PS system containing(bi)carbonate,from 4.20 to166.70 mmol/L,reduced CFA and BZF removal efficiencies from 100%to 76.8%and 80.4%,respectively,and SMX from 83.5%to 56.7%within a 120-min reaction time.In addition,alkaline conditions(pH≥8.0)inhibited CFA and BZF degradations,while nonacidic pH(pH≥7.0)remarkably inhibited SMX degradation.Results of the kinetic model indicated the formation of phosphate(H_(2)PO_(4)^(·)/HPO_(4)^(·-))and/or carbonate radicals(CO_(3)^(·-))could limit pharmaceutical removal.The transformation products(TPs)of the pharmaceuticals revealed more incompletely oxidized TPs occurred in the phosphate-and(bi)carbonate-containing m Fe-PS systems,and indicated that H_(2)PO_(4)^(·)/HPO_(4)^(·-)mainly degraded pharmaceuticals via a benzene ring-opening reaction while CO_(3)^(·-)preferentially oxidized pharmaceuticals via a hydroxylation reaction.

关键词： Pharmaceutical degradation Human urine Iron-activated persulfate system Phosphate radicals Carbonate radicals Transformation products

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：