检索结果-南通市图书馆

Study on the performance of lightweight roadway wall thermal insulation coating containing EP-GHB mixed ceramsite

Building Simulation 2024年第5期17卷 785-798页

作者： Yongliang Zhang Shili Yin Hongwei Mu Xilong Zhang Qinglei Tan Bing Shao key lab of Industrial Fluid Energy Conservation and Pollution Control Ministry of EducationQingdao University of TechnologyQingdaoShandong266520China College of Mechanical and Automotive engineering Qingdao University of TechnologyQingdaoShandong266520China

As the mining depth increases,the problem of high-temperature thermal damage mainly caused by heat dissipation of surrounding rock is becoming more and more *** is very important to solve the environmental problem of mine heat damage to improve the efficiency of mineral resource exploitation and protect the physical and mental health of *** can apply thermal insulation coating on the walls of mine roadways as a means of implementing active heat *** this paper,expanded perlite(EP)and glazed hollow bead(GHB)are used as the main thermal insulation materials,ceramsite and sand as aggregate,plus glass fiber and sodium dodecyl sulfate to develop a new lightweight composite thermal insulation coating through orthogonal experiment *** to the plate heat flow meter method and mechanical test method,the thermal insulation and mechanical properties of EP-GHB mixed ceramsite coating were studied by making specimens with different parameter ratios,and according to the analysis of the experimental results,the optimal mix ratio of the coating was *** addition,Fluent numerical simulation software was used to establish the roadway model,and the thermal insulation effect of the coating in the roadway under different working conditions was *** results show that the thermal conductivity of the prepared composite thermal insulation coating material is only 8.5% of that of ordinary cement mortar,and the optimal thickness of adding thermal insulation coating is 0.2 m,which can reduce the outlet air temperature of the roadway with a length of 1000 m by 4.87 K at this *** thermal insulation coating developed in this study has the advantages of simple technology and strong practicability,and has certain popularization and application value in mine heat damage control.

关键词： high-temperature mine thermal insulation coating orthogonal experimental optimal fit ratio numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flexural behavior of textile reinforced mortar-autoclaved lightweight aerated concrete composite panels

引用

Frontiers of Structural and Civil engineering 2024年第5期18卷 776-787页

作者： Liying GUO Mingke DENG Wei ZHANG Tong LI Yangxi ZHANG Mengyu CAO Xian HU Department of Civil engineering Xi’an University of Architecture and TechnologyXi’an 710055China key lab of Structural engineering and Earthquake Resistance Ministry of Education(XAUAT)Xi’an 710055China Scene engineering design institute Xi’an 710016China Dahua Group Shang hai 200062China

To improve the deficiencies of prefabricated autoclaved lightweight aerated concrete(ALC)panel such as susceptibility to cracking and low load-bearing capacity,a textile-reinforced mortar-autoclaved lightweight aerated concrete(TRM-ALC)composite panel was developed in this *** group of reference ALC panels and five groups of TRM-ALC panels were fabricated and subjected to four-point flexural *** was applied on the tensile side of the ALC panels to create *** variable parameters were the plies of textile(one or two),type of textile(basalt or carbon),and whether the matrix(without textile)was applied on the compression side of *** results showed that a bonding only 8-mm-thick TRM layer on the surface of the ALC panel could increase the cracking load by 180%−520%.The flexural capacity of the TRM-ALC panel increased as the number of textile layers *** reinforcement of the matrix on the compressive side could further enhance the stiffness and ultimate loadbearing capacity of the TRM-ALC *** panels with basalt textile failed in flexural mode,with the rupture of fabric *** with carbon textile failed in shear mode due to the ultra-high tensile strength of *** addition,analytical models related to the different failure modes were presented to estimate the ultimate load-carrying capacity of the TRM-ALC panels.

关键词： prefabricated autoclaved lightweight aerated concrete panel textile-reinforced mortar cracking load flexural capacity stiffness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Syntheses of new di-nuclear and tetra-nuclear lanthanide 9-anthracenecarboxylates:Magnetocaloric effect,slow magnetic relaxation and luminescent properties

引用

Journal of Rare Earths 2024年第6期42卷 1101-1109,I0004页

作者： Xing Liu Ruonan Yang Lu Zhang Jian Zhou Chunmei Huang Huahong Zou Zunhong Xiao Chongqing key laboratory of Inorganic Functional Materials College of ChemistryChongqing Normal UniversityChongqing401331China key laboratory for the Chemistry and molecular engineering of Medicinal Resources(ministry of education of China) School of Chemistry and Chemical Engineering of Guangxi Normal UniversityGuilin541004China School of Chemistry and Materials Guizhou Normal UniversityGuiyang550025China

Lanthanide complex-based materials with magnetic and luminescent properties have received a great deal of attention,owing to their importantly potential applications in diverse *** this work,the 9-anthracenecarboxylic acid(9-Haca)as bridging ligand was applied in combination with optically activeπ-conjugated 2,4,6-tri(2-pyridyl)-1,3,5-triazine(tptz)to construct a series of new di-nuclear and tetranuclear lanthanide 9-anthracenecarboxylates[La_(2)(9-aca)_(6)(tptz)_(2)(μ-H_(2)O)]·0.25H_(2)O(1),[Ln_(2)(9-aca)_(6)(tptz)_(2)(H_(2)O)_(2)]·0.5AQ·CH_(3)COOH_(2)H_(2)O[Ln=Sm(2a),Eu(2b),Gd(2c),Tb(2d),Dy(2e),Tm(2f);AQ=9,10-anthracenedione]and[Ln_(4)(9-aca)_(10)(tptz)_(2)(CH3COO)2]·H_(2)O[Ln=Eu(3a),Gd(3b),Dy(3c)].1 displays a di-nuclear centrosymmetric moiety[La_(2)(9-aca)_(6)(tptz)_(2)(μ-H_(2)O)]built up from two complex[La(9-aca)_(2)(tptz)]groups bridged by one H_(2)O molecule and two syn-syn-μ2-η1:η1-9-aca-bridging ligands,while 2a-2f are isostructural and co mprise another di-nuclear centrosymmetric moieties[Ln_(2)(9-aca)_(6)(tptz)_(2)(H_(2)O)_(2)]based on two complex[Ln(9-aca)_(2)(tptz)(H_(2)O)]groups connected by two syn-syn-μ2-η1:η1-9-aca-bridging ligands,3a-3c are isostructural and show tetra-nuclear centro symmetric moieties[Ln4(9-aca)10(tptz)2(CH3COO)2]containing three types of coordination modes of *** present compounds offer the only examples of lanthanide 9-anthracenecarboxylates decorated by optically active *** investigations of 2a,2c-2f,and 3b-3c indicate that 3c is typical of slow relaxation of the magnetization,while 2c and 3b show significant magnetocaloric effect(MCE)with the value of-ΔSm of 5.26 J/(kg·K)at 4 K and 15.65 J/(kg·K)at 2 K(ΔH=7 T),*** luminescent properties were also studied and reveal that the characteristic luminescent properties of the 7r-conjugated aromatic ligands are introduced into magnetic lanthanide 9-anthracenecarboxylates,simultaneously exhibiting slow magnetic relaxation(or MCE)and luminescen

关键词： Lanthanide complexes Luminescence Magnetic properties Magnetocaloric effect Slow magnetic relaxation Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Manipulating guest-responsive spin transition to achieve switchable fluorescence in a Hofmann-type framework

引用

Science China Chemistry 2024年第10期67卷 3339-3346页

作者： Xue-Ru Wu Shu-Qi Wu Zhi-Kun Liu Ming-Xing Chen Jun Tao Osamu Sato Hui-Zhong Kou engineering Research Center of Advanced Rare Earth Materials(ministry of education) Department of ChemistryTsinghua UniversityBeijing 100084China Institute for Materials Chemistry and engineering&IRCCS Kyushu University744 MotookaNishi-kuFukuoka 819-0395Japan key laboratory of Cluster Science of ministry of education School of Chemistry and Chemical EngineeringLiangxiang CampusBeijing Institute of TechnologyBeijing 102488China Analytical Instrumentation Center College of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China

The change of fluorescence emission manipulated by spin state transition attracts considerable attention owing to its potential applications in magneto-optical switching ***,we report two two-dimensional(2D)Hofmann-type spin crossover(SCO)metal-organic frameworks(MOFs)[Fe^(Ⅱ)(PNI)_(2){Ag^(Ⅰ)(CN)_(2)}_(2)]·CHCl_(3)(3Ag·CHCl_(3))and[FeⅡ(PNI)_(2){AuⅠ(CN)_(2)}_(2)]·CHCl_(3)(3Au·CHCl_(3))based on the fluorescent ligand N-(4-pyridylmethyl)-1,8-naphthalimide(PNI).Both complexes exhibit interesting SCO behaviors switched by guest solvent molecules,namely three-step transitions for the solvated complexes and complete onestep hysteretic SCO for the desolvated ones,verified by temperature-dependent magnetic susceptibility measurements,Mossbauer spectra,structural analyses,and differential scanning calorimetry ***,temperature-dependent fluorescence spectra exhibit double peaks(monomer and excimer emission)with both emission peaks change consistent with the change in SCO properties during the solvent molecule *** this study,we integrated guest-responsive SCO behavior into MOFs to manipulate the multistability of spin state and fluorescence switching,providing a rational strategy for the development of stimuli-responsive multifunctional materials.

关键词： spin crossover fluorescence multifunctional materials metal-organic frameworks Hofmann-type

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Co-Harvest Phase-Change Enthalpy and Isomerization Energy for High-Energy Heat Output by Controlling Crystallization of Alkyl-Grafted Azobenzene Molecules

引用

Energy & Environmental Materials 2024年第3期7卷 415-424页

作者： Jian Gao Yiyu Feng Wenyu Fang Hui Wang Jing Ge Xiaoyu Yang Huitao Yu Mengmeng Qin Wei Feng School of Materials Science and engineering Tianjin UniversityTianjin 300350China key laboratory of Materials Processing and Mold Ministry of EducationZhengzhou UniversityZhengzhou 450002China

Photoisomerization-induced phase change are important for co-harvesting the latent heat and isomerization energy of azobenzene *** optimizing heat output and energy delivery at alternating temperatures are challenging because of the differences in crystallizability and *** article reports two series of asymmetrically alkyl-grafted azobenzene(Azo-g),with and without a methyl group,that have an optically triggered phase *** exothermic modes were designed to utilize crystallization enthalpy(△H_(c))and photothermal(isomerization)energy(△H_(p))at different temperatures determined by the ***-g has high heat output(275-303 J g^(-1))by synchronously releasing△H_(c)and△H_(p)over a wide temperature range(-79℃to 25℃).We fabricated a new distributed energy utilization and delivery system to realize a temperature increase of 6.6℃at a temperature of-8℃.The findings offer insight into selective utilization of latent heat and isomerization energy by molecular optimization of crystallization and isomerization processes.

关键词： crystallizability distributed energy utilization system energy density exothermic modes isomerization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Reversible aqueous aluminum metal batteries enabled by a water-in-salt electrolyte

引用

Green Energy & Environment 2024年第7期9卷 1183-1191页

作者： Wenjing Tang Lijun Deng Longyuan Guo Shoubin Zhou Qinhai Jiang Jiayan Luo Shanghai key lab of Advanced High-Temperature Materials and Precision Forming State School of Materials Science and Engineering Shanghai Jiao Tong University School of Science Harbin Institute of Technology key laboratory for Green Chemical Technology of ministry of education School of Chemical Engineering and Technology Tianjin University HuaFu High Technology Energy Storage CO. LTD Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and molecular engineering

Aluminum（Al）, the most abundant metallic element on the earth crust, has been reckoned as a promising battery material for its the highest theoretical volume capacity(8046 mAh cm-3). Being rechargeable in ionic liquid electrolytes, however, the Al anode and battery case suffer from corrosion. On the other hand, Al is irreversible in aqueous electrolyte with severe hydrogen evolution reaction. Here, we demonstrate a water-in-salt aluminum ion electrolyte（WISE） based on Al and lithium salts to tackle the above challenges. In the WISE system, water molecules can be confined within the Li+solvation structures. This diminished Al3+-H2O interaction essentially eliminates the hydrolysis effect, effectively protecting Al anode from corrosion. Therefore, long-term Al plating/stripping can be realized. Furthermore, two types of high-performance full batteries have been demonstrated using copper hexacyanoferrate（CuHCF, a Prussian Blue Analogues） and LiNi0.8Co0.1Mn0.1O2（NCM） as cathodes. The reversibility of Al anode laid the foundation for low cost rechargeable batteries suffering for large-scale energy *** context: Al batteries are expected to become a safe and sustainable alternative to lithium batteries. For decades, chase for a feasible Al secondary battery has not been successful. The key challenge is to find suitable cathode and electrolyte materials, together with which Al anode battery can function reversibly. Currently, fatal drawbacks have impeded the practical application of Al metal batteries（AMBs）, such as sustained corrosion of Al anode and battery case in ionic liquid electrolytes, irreversibility issues as well as severe hydrogen evolution reaction during cycling in aqueous electrolyte. Therefore, electrolyte and their electrochemical kinetics play a vital role in the performance and environmental operating limitations of high-energy Al metal batteries. In this work, we demonstrate a nearly neutral Al ion water-in-salt electrolyte（WISE） to tackle th

关键词： Water-in-salt electrolyte Rechargeable aluminum anode Solvation sheath Hybrid battery Abundance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

From charge storage mechanism to performance:A strategy toward boosted lithium/sodium storage through heterostructure optimization

引用

Journal of Energy Chemistry 2024年第1期88卷 112-124,I0003页

作者： Xiaoke Zhang Guangfa Deng Mianying Huang Zhaohui Xu Jianlin Huang Xuan Xu Zhiguang Xu Maochan Li Lei Hu Xiaoming Lin key laboratory of Theoretical Chemistry of Environment Ministry of EducationSchool of ChemistrySouth China Normal UniversityGuangzhou 510006GuangdongChina Anhui laboratory of Functional Coordinated Complexes for Materials Chemistry and Application School of Chemical and Environmental EngineeringAnhui Polytechnic UniversityWuhu 241000AnhuiChina National engineering Research Center for Carbohydrate Synthesis Key Lab of Fluorine and Silicon for Energy Materials and Chemistry of Ministry of EducationJiangxi Normal UniversityNanchang 330022JiangxiChina

Solving the problems of low electrical conductivity and poor cycling durability in transition metal oxidesbased anode materials for lithium-ion batteries(LIBs)and sodium-ion batteries(SIBs)has already turned into an urgent *** this paper,we successfully synthesized Co_(2)VO_(4)/Co compounds with Co-VMOF(metal-organic framework)as a sacrificial template and investigated their electrochemical mechanism in order to improve the electrochemical properties of LIBs and *** optimized heaping configuration and the existence of metallic Co catalyzed the formation of radical ions,thereby facilitating higher conductivity,shortening Li+and Na+transport paths,and providing more active ***_(2)VO_(4)/Co constructed with 2-methylimidazole as a ligand showed a discharge capacity of 1605.1 mA h g^(-1)after 300 cycles at 0.1 A g^(-1)in LIB and 677.2 mA h g^(-1)in *** functional theory(DFT)calculation emphasizes the crucial role of Co_(2)VO_(4)/Co in enhancing electrode conductivity,decreasing the migratory energy barrier,and thereby strengthening electrochemical *** heterostructure building technique may pave the way for the development of high-performance LIBs and ***,the problem of the low first-loop coulombic efficiency faced by transition metal oxides is improved.

关键词： Metal-organic framework Heterostructure Lithium-ion batteries Sodium-ion batteries DFT calculation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dynamic Sulfur-Rich Polymers from Elemental Sulfur and Epoxides

引用

Chinese Journal of Polymer Science 2024年第10期42卷 1479-1487,I0010页

作者： Ke-Xiang Chen Chen-Hui Cui Zhen Li Ting Xu Hao-Qing Teng Zhi-Yuan He Yin-Zhou Guo Xiao-Qing Ming Zhi-Shen Ge Yan-Feng Zhang Tie-Jun Wang School of Chemistry Engineering Research Center of Energy Storage Materials and DevicesMinistry of EducationXi’an Jiaotong UniversityXi’an710049China State key lab for Strength and Vibration of Mechanical Structures Department of Engineering MechanicsXi’an Jiaotong UniversityXi’an710049China

Sulfur-containing dynamic polymers had attracted significant attention due to their unique chemical structures with high *** sulfur, an inexpensive industrial waste product, to synthesize dynamic polysulfide polymers through reverse vulcanization has been a notable approach. However, this method required high temperatures and resulted in the release of unpleasant oders. In this study, we presented a robust method for the preparation of sulfur-rich polymers with dynamic polysulfide bonds from elemental sulfur and inexpensive epoxide monomers via a one-pot strategy at the mild room temperature. Different types of polysulfide molecules and polymers were synthesized by reacting various epoxide compounds with sulfur, along with the investigation of their structures and dynamic behaviors. It was noteworthy that the obatined polymers prepared from m-(2,3-epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline and elemental sulfur exhibit multiple dynamic behaviors, including polysulfide metathesis and polysulfide-thiol exchange, enabling their rapid stress relaxation, self-healing, reprocessing and degradable properties of the cross-linked polymer. More importantly, the hydroxyl groups at the side chains from epoxide ring opening exhibited potential transesterification. This work provided a facile strategy for designing dynamic sulfur-rich polymers via a mild synthesis route.

关键词： Elemental sulfur Sulfur-containing polymer Dynamic covalent bond Dynamic polymer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-efficiency crystalline carbon nitride photocatalysts:Status and perspectives

引用

Nano Research 2024年第9期17卷 7840-7863页

作者： Wenji Pu Yunqiao Zhou Lingfeng Yang Haifeng Gong Yuhan Li Qingyu Yang Dieqing Zhang engineering Research Center for Waste Oil Recovery Technology and Equipment Ministry of EducationChongqing Key Laboratory of Catalysis and New Environmental MaterialsChongqing Technology and Business UniversityChongqing 400067China The education ministry key lab of Resource Chemistry Joint International Research Laboratory of Resource Chemistry of Ministry of EducationShanghai Key Laboratory of Rare Earth Functional Materialsand Shanghai Frontiers Science Center of Biomimetic CatalysisShanghai Normal UniversityShanghai 200234China State key laboratory of Tibetan Plateau Earth System Resources and EnvironmentInstitute of Tibetan Plateau ResearchChinese Academy of SciencesBeijing 100101China

Crystallinity and crystal structure greatly influence the photocatalytic behavior of *** g-C3N4 produced by traditional thermal-induced polycondensation reaction bears low crystallinity and thus poor photoactivity,which originates from the incomplete polymerization of the precursor containing amine groups,abundant hydrogen bonds,and unreacted amino,as well as cyanide functional groups in the *** photocatalytic process,these residual functional groups often work as electron trap sites,which may hinder the transfer of electrons on the plane,resulting in low ***,crystalline carbon nitride(CCN)was reported as a promising photocatalyst because its increased crystallinity not only reduces the number of carriers recombination centers,but also increases charge conductivity and improves light utilization due to extendedπ-conjugated systems and delocalizedπ-*** such,we summarize the recent studies on CCN-based photocatalysts for the photoactivity ***,the unique structure and properties of CCN materials are ***,the preparation methods and modification strategies are well *** also sum up the applications of CCN-based materials in the environmental purification and energy ***,this review concerning CNN materials ends with prospects and challenges in the obtainment of high crystallinity by effective techniques,and the deep understanding of photocatalytic mechanism.

关键词： crystalline carbon nitride preparation method modification strategy photocatalytic application

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Active Template Synthesis of Protein[n]Catenanes Using Engineered Peptide–Peptide Ligation Tools

引用

CCS Chemistry 2024年第2期6卷 377-389页

作者： Fan Zhang Yajie Liu Yu Shao Wen-Bin Zhang Beijing National laboratory for molecular Sciences Key Laboratory of Polymer Chemistry and Physics of Ministry of EducationCenter for Soft Matter Science and EngineeringCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871 Beijing Academy of Artificial Intelligence Beijing 100084

The expansion of protein topological diversity requires new and efficient synthetic ***,we report the second and third generations of the SpyStapler-mediated SpyTag/BDTag ligation system for the efficient synthesis of 4-arm star proteins and the repurposing of the third generation as an active template to enable the synthesis of higher-order protein[n]catenanes(n=3,4,and 5).SpyStapler003 has a higher affinity to its cognate SpyTag and BDTag reactive pairs relative to the original ***,it can overcome much more profound steric hindrance in protein ligation and improve the efficiency of the resulting active template tool to facilitate the construction of radial protein[n]*** proteins of interest,such as dihydrofolate reductase and the nanobody KN035,can be modularly incorporated into the[n]catenanes with intact *** of passive and active template strategies gives rise to linear protein[4]catenanes,which further expands the current topological ***,higher-order protein catenation not only leads to enhanced thermal stability and proteolytic resistance but also higher affinity of the nanobody via multivalent *** study provides tools useful for bioconjugation and new topological protein scaffolds for the multivalent display of enzymes and antibodies.

关键词： SpyTag SpyCatcher catenane topology active template ligation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：