检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2233-2243页

作者： Guonan Ma Shize Zhu Dong Wang Peng Xue BolüXiao Zongyi Ma Shi-changxu Innovation center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Centre of Excellence for Advanced materials Dongguan 523808China

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion *** effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively *** with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform *** to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was *** the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile *** fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu *** regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the *** compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

关键词： metal matrix composites heat treatment interfacial reaction mechanical properties fracture mechanism

Thermal properties and high-temperature ablation of high-entropy (Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) coating on graphite substrate

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第8期13卷 1268-1281页

作者： Ana C.Feltrin Daniel Hedman Farid Akhtar Division of materials Science Lulea University of TechnologyLulea 97187Sweden center for Multidimensional Carbon materials(CMCM) Institute for Basic Science(IBS)Ulsan 44919Republic of Korea

An entropy-stabilized multicomponent ultrahigh-temperature ceramic(UHTC)coating,(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2),on a graphite substrate was in-situ sintered by spark plasma sintering(SPs)from constituent transition metal diboride ***(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) coating had a hardness of 31.2±2.1 GPa and resisted 36.9 GPa of stress before delamination,as observed at the *** temperature-dependent thermal properties of the multicomponent diboride(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) were obtained by molecular dynamics(MD)simulations driven by a machine learning force field(MLFF)trained on density functional theory(DFT)*** thermal conductivity,density,heat capacity,and coefficient of thermal expansion obtained by the MD simulations were used in time-dependent thermal stress finite element model(FEM)*** low thermal conductivity(materials in engineering components under extreme environments.

关键词： entropy-stabilized diborides ultrahigh temperature ceramics molecular dynamics(MD)simulations density functional theory(DFT) ablation properties

The first chiral cerium halide towards circularly-polarized luminescence in the UV region

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第6期67卷 1961-1968页

作者： Xinyi Niu Zhichao Zeng Zhaoyu Wang Haolin Lu Bing Sun Hao-Li Zhang Yongsheng Chen Yaping Du Guankui Long Tianjin Key Lab for Rare Earth materials and Applications Renewable Energy Conversion and Storage CenterSmart Sensing Interdisciplinary Science CenterSchool of Materials Science and EngineeringNational Institute for Advanced MaterialsNankai UniversityTianjin300350China Tianjin Key Lab for Rare Earth materials and Applications Center for Rare Earth and Inorganic Functional MaterialsHaihe Laboratory of Sustainable Chemical TransformationsSmart Sensing Interdisciplinary Science CenterSchool of Materials Science and EngineeringNational Institute for Advanced MaterialsNankai UniversityTianjin300350China State Key Laboratory of Applied Organic Chemistry Key Laboratory of Special Function Materials and Structure Design(Ministry of Education)College of Chemistry and Chemical EngineeringLanzhou UniversityLanzhou730000China The Centre of Nanoscale Science and Technology and State Key Laboratory of Elemento-Organic Chemistry Frontiers Science Center for New Organic MatterCollege of ChemistryNankai UniversityTianjin300071China

Chiral organic-inorganic hybrid metal halides(OIHMHs)have attracted broader scientific community recently in spin lightemitting diodes,and circularly polarized light-emitting ***,the emission peaks of the reported chiral OIHMHs mainly locate in the visible region,and chiral OIHMH with ultraviolet(UV)circularly polarized luminescence(CPL)has been rarely *** fill this gap,cerium,a unique rare-earth(RE)element with tunable luminescence from UV to the visible region owing to the 4 f-related electronic transition,was introduced to construct the first RE-based chiral OIHMHs,R/*** chirality is successfully transferred from the chiral organic cations to the inorganic cerium chloride framework in R/S-MCC,as confirmed by the single crystal structures,circular dichroism,and *** emission spectra of R/S-MCC are in the UV region,originating from the characteristic d-f transition of Ce^(3+),which making the Ce-based metal halides are ideal candidates towards CPL light sources in the UV ***,R-and S-MCC are the first RE-based OIHMHs,also the first chiral metalhalides with UV *** work opens a new avenue for the development of the chiral OIHMH family towards RE-based chiral *** RE-based chiral metal halides couple the unique and superior optical,electrical,magnetic,and spintronic properties of RE elements with chirality could accelerate the development of chiral optoelectronics and spintronics toward real applications.

关键词： chiral rare-earth halide ultraviolet circularly-polarized luminescence d-f transition rare-earth halide perovskite chiral perovskite

Removing trace oxygen to obtain truly intrinsic transport in organic semiconductors

在线全文

学校读者我要写书评

暂无评论

Science China materials 2024年第5期67卷 1668-1669页

作者： Hans Kleemann Dresden Integrated center for Applied Physics and Photonic materials Technische UniversitätDresdenGermany

Organic semiconductor is an emerging generation semiconductor material,which has a broad application prospect in the field of flexible and large-area *** now,tens of thousands of organic semiconductor molecules with diverse functions have been developed through elaborate molecular *** molecules are often classified into n-type and ptype,depending on whether the prevalent charge carriers are electrons or holes[1].

关键词： transport intrinsic moving

Magnetism and Superconductivity in the t–J Model of La_(3)Ni_(2)O_7 Under Multiband Gutzwiller Approximation

在线全文

学校读者我要写书评

暂无评论

Chinese Physics Letters 2024年第5期41卷 97-106页

作者：薛洁然王垡 International center for Quantum materials School of PhysicsPeking UniversityBeijing 100871China Collaborative Innovation center of Quantum Matter Beijing 100871China

The recent discovery of possible high temperature superconductivity in single crystals of La_(3)Ni_(2)O_(7) under pressure renews the interest in research on *** density functional theory calculations reveal that both d_(z^(2)) and d_(x^(2)-y^(2)) orbitals are active,which suggests a minimal two-orbital model to capture the low-energy physics of this *** this work,we study a bilayer two-orbital t–J model within multiband Gutzwiller approximation,and discuss the magnetism as well as the superconductivity over a wide range of the hole *** to the inter-orbital super-exchange process between d_(z^(2)) and d_(x^(2)-y^(2)) orbitals,the induced ferromagnetic coupling within layers competes with the conventional antiferromagnetic coupling,and leads to complicated hole doping dependence for the magnetic properties in the *** increasing hole doping,the system transfers to A-type antiferromagnetic state from the starting G-type antiferromagnetic(G-AFM)*** also find the inter-layer superconducting pairing of d_(x^(2)-y^(2)) orbitals dominates due to the large hopping parameter ofd_(z^(2)) along the vertical inter-layer bonds and significant Hund’s coupling between d_(z^(2)) and d_(x^(2)-y^(2)) ***,the G-AFM state and superconductivity state can coexist in the low hole doping *** take account of the pressure,we also analyze the impacts of inter-layer hopping amplitude on the system properties.

关键词： properties doping orbital

A new Keggin-type polyoxometallate-based bifunctional catalyst for trace detection and pH-universal photodegradation of phenol

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第8期35卷 335-340页

作者： Shuang Li Jiayu Sun Guocheng Liu Shuo Zhang Zhong Zhang Xiuli Wang College of Chemistry and materials Engineering Professional Technology Innovation Center of Liaoning Province for Conversion Materials of Solar CellBohai UniversityJinzhou 121013China

The widespread application of phenolic substances in the field of food,medicine and industry,is harmful to the environment and human ***,it is very important to develop a con-venient and effective method to detect and degrade phenolic ***,we report a new keggin-type polyoxometallate-based metal-organic complex self-assembled under solvothermal condition,{[Cu(dap)(3-PA)]4(SiW_(12)O_(40))(H_(2)O)_(2)}·2H_(2)O(1,dap=1,2-diaminopropane,3-HPA=3-pyridineacrylic acid).1 shows an interesting 1D ladder-like *** a bifunctional catalyst,1 can be employed as a colori-metric sensor toward phenol with the relatively low detection limit(LOD)of 0.36μmol/L(S/N=3)in the wide range(0.001-0.1 mmol/L).The title colorimetric sensor is applied to determine phenol in various water environment with good recoveries ranging from 95%-105%.In addition,1 also exhibits excellent photocatalytic degradation toward phenol under visible light with the highest removal efficiency at 96%for 100 min and wide pH *** selectivity,stability and reliability of the detection of 1 towards phenol,as well as the detection for 4-chlorophenol,o-cresol,4-nitrophenol and phloroglucinol were ***,the photocatalytic reaction kinetics and the mechanisms of photodegradation of phenol were also investigated in detail.

关键词： POM-based metal-organic complex Bifunctional catalyst Phenolic colorimetric sensor Low detection limit pH-universal photocatalysis Photodegraded phenol

Influence of erbium addition on microstructure and performances of AlSi10Mg alloy prepared by selective laser melting

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第10期42卷 1988-1994页

作者： Bin Chen Fuzhu Wang Shiming Ren Peng Xia Zhipeng Wang Jianfei Hao Zhiping Chen Runxia Li Hongxiang Jiang Research Institute of Interdisciplinary Science & School of materials Science and Engineering Dongguan University of Technology College of materials Science and Engineering Shenzhen University Shi-Changxu Innovation center for Advanced materials Institute of Metal ResearchChinese Academy of Sciences School of materials Science and Engineering University of Science and Technology of China

The effect of rare earth addition on the microstructure and mechanical performances of as-cast and wrought Al alloys has been attracting increasing attention *** earth addition has great potential in modifying the structure and improving the properties of ***,there are currently few reports about the effect of rare earth addition on the microstructure and performances of Al alloys prepared via selective laser ***,AlSi10Mg alloys were manufactured using selective laser melting,and the effect of Er addition was *** results indicate that Er addition leads toα-Al refinement and modifies the minority Si *** formation of the Al3Er phase induced by Er addition enhances the stren gth of the *** of the Si phase also increases *** strategy can help improve the mechanical performance of alum inum alloys prepared via selective laser melting.

关键词： Aluminum alloy Er Microstructure Rare earths Selective laser melting Tensile performance

High-strength,stretchable,and NIR-induced rapid self-healing polyurethane nanocomposites with bio-inspired hybrid crosslinked network

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6353-6361页

作者： Tianbo Deng Junyuan Zhu He Zhao Binbin Xu Ling Zhang Chunzhong Li Key Laboratory for Ultrafine materials of Ministry of Education Shanghai Engineering Research Center of Hierarchical NanomaterialsFrontiers Science Center for Materiobiology and Dynamic ChemistrySchool of Materials Science and EngineeringEast China University of Science&TechnologyShanghai 200237China

Stretchable and self-healable materials with excellent mechanical performance hold great promise for applications in flexible functional *** rapid developments,achieving high mechanical strength,extreme stretchability,and rapid selfhealing capability in self-healing materials remains ***,inspired by the hierarchical structure and unique network of connective tissue,we fabricated a class of bionic nanocomposites with high stretchability,outstanding mechanical strength,and rapid self-healing ability by integrating the bottlebrush copolymer functionalized graphene oxide(BCP@GO)into a polyurethane(PU)matrix via in-situ *** bottlebrush copolymer(BCP)acted as a bond bridge for linking the GO nanosheets(noncovalent interaction)and PU chains(covalent and hydrogen-bond interaction).The covalent interactions were responsible for providing high mechanical strength,and the abundant hydrogen-bond-based cross-links realized extreme stretchability and rapid self-healing *** resultant BCP@GO/PU nanocomposite with only 0.5 wt.%GO loading exhibited excellent mechanical properties(tensile strength increased by 52.1%,up to 28.6 MPa;toughness increased by 70.8%,up to 256.9 MJ/m^(3);elongation at break increased by 12.8%,up to 1847.2%),exceptional rapid and efficient self-healing ability(~99%with 20 s NIR irradiation),as well as superior shape memory and recyclable *** study develops a new strategy for designing highperformance self-healing nanocomposites and unfolds broad application prospects in smart materials.

关键词： self-healing materials smart nanocomposite high mechanical property shape memory recyclability

Tailoring the texture and mechanical properties of 3%Y_(2)O_(3)p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1479-1495页

作者： Xihai Li Hong Yan Zhiwei Shan Rongshi Chen Shi-changxu Innovation center for Advanced materials Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of materials Science and Engineering University of Science and Technology of China72 Wenhua RoadShenyang 110016China School of materials Science and Engineering Shandong University of Science and TechnologyQingdaoShandong 266590China center for Advancing materials Performance from the Nanoscale(CAMP-Nano)and Hysitron Applied Research center in China(HARCC) State Key Laboratory for Mechanical Behavior of MaterialsXi’an Jiaotong UniversityXi’an 710049China

3%Y_(2)O_(3)p/ZGK200 composites were subjected to unidirectional rolling(UR)and cross rolling(CR)at 400℃and 350℃followed by annealing at 300℃for 1 *** microstructure,texture and mechanical properties of rolled and annealed composites were systematically *** rolled composites exhibited a heterogeneous microstructure,consisting of deformed grains elongated along rolling direction(RD)and Y_(2)O_(3)particles bands distributed along *** annealing,static recrystallization(SRX)occurred and most deformed grains transformed into equiaxed grains.A non-basal texture with two strong T-texture components was obtained after UR while a non-basal elliptical/circle texture with circle multi-peaks was obtained after CR,indicating that rolling path had great influences on texture of the *** annealing process,R-texture component disappeared or weakened,as results,a non-basal texture with double peaks tilting from normal direction(ND)to transverse direction(TD)and a more random non-basal texture with circle multi-peaks were obtained for UR and CR composites,*** yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after *** Y_(2)O_(3)particles broke during *** fracture of the composites was attributed to the existence of Y_(2)O_(3)clusters and interfacial debonding between particles and matrix during tension,as a result,the ductility was not as superior as matrix alloy.

关键词： Magnesium matrix composites Unidirectional rolling Cross rolling Texture Mechanical properties

Toluene Processed All-Polymer Solar Cells with 18% Efficiency and Enhanced Stability Enabled by Solid Additive:Comparison Between Sequential-Processing and Blend-Casting

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental materials 2024年第4期7卷 247-254页

作者： Guoping Zhang Chaoyue Zhao Liangxiang Zhu Lihong Wang Wenzhao Xiong Huawei Hu Qing Bai Yaping Wang Chen Xie Peng You He Yan Dan Wu Tao Yang Mingxia Qiu Shunpu Li Guangye Zhang College of New materials and New Energies Shenzhen Technology University Department of Chemistry and Hong Kong Branch of Chinese National Engineering Research center for Tissue Restoration and Reconstruction The Hong Kong University of Science and Technology State Key Laboratory for Modification of Chemical Fibers and Polymer materials Center for Advanced Low-dimension Materials College of Materials Science and Engineering Donghua University Julong College Shenzhen Technology University

The emergence of polymerized small molecule acceptors (PSMAs) has significantly improved the performance of all-polymer solar cells (all-PSCs).However,the pace of device engineering lacks behind that of materials deve... 详细信息

关键词： all-polymers solar cells sequential processing solid additive