检索结果-南通市图书馆

International Journal of Mining Science and technology 2025年第1期35卷 101-120页

作者： Zhenyu Wang Bo Wang Xinxin Guo Jinjin Li Zhenwang Ma State Key Laboratory of Intelligent Geotechnics and Tunnelling Southwest Jiaotong UniversityChengdu 610031China State Key Laboratory of Geohazard Prevention and Geoenvironmental Protection Chengdu University of TechnologyChengdu 610059China China Design group Co. Ltd.Nanjing 210001China

To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is *** yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding *** and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical *** main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.

关键词： Compact yielding anchor cables Working state Yielding resistance enhancement effect Yielding mechanical performance Pull-out test

Flammable carbon nanotube transistors on a nitrocellulose paper substrate for transient electronics

在线全文

学校读者我要写书评

暂无评论

Nano Research 2017年第1期10卷 87-96页

作者： Jinsu Yoon Juhee Lee Bongsik Choi Dongil Lee Dae Hwan Kim Dong Myong Kim Dong-II Moon Meehyun Lim Sungho Kim Sung-Jin Choi School of Electrical Engineering Kookmin University Seou102707 Republic of Korea School of Electrical Engineering Korea Advanced Institute of Science and Technology (KAIST) Daejeon 3414 I Republic of Korea Center for Nanotechnology NASA Ames Research Center Moffett Field CA 94035 USA test&package technology group Mechatronics R&D Center Samsung Electronics Gyeonggi-do 18448 Repubfic of Korea Department of Electrical Engineering Sejong University Seou105006 Republic of Korea

Transient electronics represent an emerging class of technology comprising materials that can vanish in a controlled manner in response to stimuli. In contrast to conventional electronic devices that are designed to operate over the longest possible period, transient electronics are defined by operation typically over a short and well-defined period; when no longer needed, transient electronics undergo self-deconstruction and disappear completely. In this work, we demonstrate the fabrication of thermally triggered transient electronic devices based on a paper substrate, specifically, a nitrocellulose paper. Nitrocellulose paper is frequently used in acts of magic because it consists of highly flammable components that are formed by nitratil^g cellulose by exposure to nitric acid. Therefore, a complete and rapid destruction of electronic devices fabricated on nitrocellulose paper is possible without producing any residue （i.e., ash）. The transience rates can be modified by controlling radio frequency signal-induced voltages that are applied to a silver （Ag） resistive heater, which is stamped on the backside of the nitrocellulose paper. The Ag resistive heater was prepared by a simple, low-cost stamping fabrication, which requires no harsh chemicals or complex thermal treatments. For the electronics on the nitrocellulose paper substrate, we employed semiconducting carbon nanotube （CNT） network channels in the transistor for superior electrical and mechanical properties.

关键词： carbon nanotube,paper substrate,flammable,transient security

A facile data-driven battery capacity estimation framework for on-road plug-in hybrid electric vehicle

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2025年第01期 166-176页

作者： Jianlu Li Yanming Chen Tongxing Lei Jianguo Liu Guizheng Liu Zhaoyang Deng Xuebiao Wu Zhiyu Ding Yinghe Zhang Junwei Wu Yanan Chen Guangzhou Automobile group Co. Ltd. School of Materials Science and Engineering Harbin Institute of Technology School of Materials and Environmental Engineering Shenzhen Polytechnic University School of Science Shenzhen Key Laboratory of Flexible Printed Electronics Technology Shenzhen Key Laboratory of Advanced Functional Carbon Materials Research and Comprehensive Application Harbin Institute of Technology School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education Tianjin Key Laboratory of Composite and Functional Materials Tianjin University

A data-driven framework with strong generalization capabilities is proposed to effectively extract features and easily access battery capacity. This framework can make highly accurate predictions for the battery capacities of plug-in electric vehicles. The feature extraction process is entirely based on statistics, which are always available and can be generalized to various types of battery data. An improved ampere-hour integral method can easily access battery capacity with just short-charging segments lasting 500 s. Several machine-learning models are trained to verify the framework's effectiveness, with the best model achieving a test error of 0.84 % based on leave-one-out validation. SHAP values are used to provide a reasonable interpretation of the relationships between the constructed features and model outputs. The proposed framework offers advantages such as reduced computational resources, wide generalization, and high prediction accuracy, showing great potential for battery management.

关键词：

Influence of ultrafine cement on cement-soil in peat soil environment of Dianchi Lake

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

土木与环境工程学报(中英文) 2025年第2期47卷 1-12页

作者： CAO Jing SUN Huafeng HUANG Siyang KONG Cheng LIU Fangyi LIU Fuhua TIAN Lin ZHU Weiming Faculty of Civil Engineering and Mechanics Kunming University of Science and TechnologyKunming 650500P.R.China China Power Construction group Kunming Survey Design&Research Institute Co. LtdKunming 650500P.R.China Zhejiang Wanning technology Co. LtdHangzhou 310000P.R.China

Treatment of peat soil foundation in Yunnan surrounding Dianchi and Erhai Lakes poses complex problems for engineering *** is insufficient to rely on ordinary cement to reinforce peat *** order to make the reinforcement reliable,this experiment mixed(ultrafine cement)UFC into ordinary cement to form a composite solidify *** study aimed to analyze the influence of UFC proportion on the strength of cement-soil in the peat soil *** compressive strength(UCS)and scanning electron microscope(SEM)tests were conducted on samples soaked for 28 and 90 days,*** test results show that without considering the effects of Humic Acid(HA)and Fulvic Acid(FA),incorporating UFC can significantly improve the UCS of *** rapid hydration of the fine particles generates a large number of cementitious products,improves the cohesion of the soil skeleton,and fills the ***,when the proportion of UFC increases,the aggregate structure formed by a larger quantity of fine particles reduces the hydration rate and degree of cement hydration,making the UCS growth rate of cement-soil *** the peat soil environment,HA significantly weakened the UCS of cement-soil in both physical and chemical ***,UFC can mitigate the adverse effect of HA on cement-soil by its small particle size,high surface energy,and solid binding *** addition,FA has a positive effect on the UCS of cement-soil soaked for 28 days and 90 *** UFC addition could promote the enhancement effect of FA on cement-soil *** test results showed that cement hydration products increased significantly with the increase of UFC proportion,and cementation between hydration products and soil particles was *** size and connectivity of cement-soil pores were significantly reduced,thereby improving cement-soil structural integrity.

关键词： peat soil environment ultrafine cement(UFC) cement-soil strength test microstructure

Effect of initial microstructure on microstructure evolution and mechanical properties of 0.12C martensitic steels during quenching and tempering

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2025年第1期32卷 260-269页

作者： Ya-ru Wang Zi-yong Hou He Yang Jun Zhao Zhi-yuan Chang Fan-mao Meng Ling Zhang Gui-lin Wu Xiao-xu Huang State Key Laboratory of Vanadium and Titanium Resource Comprehensive Utilization Panzhihua 617000SichuanChina State Key Laboratory of Advanced Special Steel Shanghai Key Laboratory of Advanced FerrometallurgySchool of Materials Science and EngineeringShanghai UniversityShanghai 200444China International Joint Laboratory for Light Alloys(Ministry of Education) College of Materials Science and EngineeringChongqing UniversityChongqing 400044China Institute of Steel technology for Automobile and Household Appliance Pangang Group Co.Ltd.Panzhihua 617000SichuanChina ATB Motor(Shanghai)Co. Ltd.Keen International CenterShanghai 200041China Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China

The microstructure evolution and mechanical properties of a Fe-0.12C-0.2Si-1.6Mn-0.3Cr-0.0025B(wt.%)steel with different initial microstructures,i.e.,hot rolled(HR)and cold rolled-annealed(CRA),were studied through optical microscopy,scanning electron microscopy,electron channeling contrast imaging,microhardness and room temperature uniaxial tensile *** water quenching from 930℃ to room temperature,a fully martensitic microstructure was obtained in both as-quenched HR and CRA specimens,which shows a microhardness of 480±5 HV,and no significant difference in microstructure and microhardness was *** test results show that the product of tensile strength and total elongation(UTS×TE)of the as-quenched HR specimen,i.e.,24.1 GPa%,is higher than that of the as-quenched CRA specimen,i.e.,18.9 GPa%.While,after being tempered at 300℃,the martensitic microstructures and mechanical properties of the two as-quenched specimens change significantly due to the synergy role of the matrix phase softening and the precipitation *** the maximum UTS×TE,it is 18.9 GPa%obtained in the as-quenched CRA one,while that is 24.4 GPa%obtained in the HR specimen after tempered at 300℃ for 5 min.

关键词： Initial microstructure Lath martensite Quenching Tempering Mechanical property

Analysis of asphalt pavement structural response from an accelerated loading test

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Harbin Institute of technology(New Series) 2007年第4期14卷 501-505页

作者：陈少幸张肖宁孟书涛徐全亮 Guangdong Transportation and Communication group test Center Road Engineering Institute South China University of Technology Research Institute of Highway Ministry of Communications

This study was to compare theoretical calculation and practical measurement structure response of asphalt pavement. Analysis of the pavement layer moduli was determined from a Back-calculation of Falling Weight Deflectometer (FWD) data and the measured stiffness moduli of asphalt layer cores. The pavement response was calculated using a theoretical model and the measured strain response at the bottom different layers. Layered elastic theory was used to back-calculate the layer moduli and three different theory models were used to forward calculate the strain and deflection. The models were: Layered Elastic Theory (LET), the Method of Equivalent Thicknesses (MET) with linear elastic and the Finite Element Method (FEM) where asphalt layer may be viscoelastic. The results showed that the calculation structure response from FEM was consistent with measured results.

关键词： asphalt pavement accelerated loading facility response analysis

Drilling Power Consumption and Soil Conveying Volume Performances of Lunar Sampling Auger

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2015年第3期28卷 451-459页

作者： TIAN Ye TANG Dewei DENG Zongquan JIANG Shengyuan QUAN Qiquan State Key Laboratory of Robotics and System Harbin Institute of Technology University Research Center of package Mechanical Design Harbin University of Commerce

The sampling auger used in lunar sampling and return mission is to transmit power and convey soil, and its performance is the key factor of the whole mission. However, there is currently a lack of the optimization research on soil conveying volume and power consumption models in auger structure design. To provide the drilled object, the simulation lunar soil, whose physical and mechanical property is the same as the real soil, is made by reducing soil void ratio. The models are formulated to analyze the influence of auger structure parameters on power consumption and soil conveying volume. To obtain the optimized structure parameters of auger, the multi-objective optimization functions of the maximum soil conveying volume and minimum power consumption are developed. To verify the correctness of the models, the performances of different augers drilling simulation soil are tested. The test results demonstrate that the power consumption of optimized auger is the lowest both in theory and test, and the experimental results of soil conveying volume are in agreement with theoretical analysis. Consequently, a new method for designing a lunar sampling auger is proposed which includes the models of soil conveying volume and transportation power consumption, the optimization of structure parameters and the comparison tests. This method provides a reference for sampling auger designing of the Chinese Lunar Sample Mission.

关键词： lunar sampling optimal design auger soil conveying volume model structure parameter

A high-efficient triboelectric-electromagnetic hybrid nanogenerator for vibration energy harvesting and wireless monitoring

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2022年第4期65卷 229-237页

作者： Jian HE Xueming FAN Dongyang ZHAO Min CUI Bing HAN Xiaojuan HOU Xiujian CHOU Science and technology on Electronic test and Measurement Laboratory North University of China College of Mechatronic Engineering North University of China Beijing Institute of Computer Application China North Industries Group Corporation Limited

Scavenging mechanical vibration energy by combining triboelectric nanogenerators(TENGs) and electromagnetic generators(EMGs) is a renewable and low-carbon way to generate electric power. In this paper, we fabricate a cylindrical structure hybrid nanogenerator based on spring structure to effectively scavenge vibration energy. The introduction of spring structure not only enhances the space utilization, but also supports the moving magnet. Owing to its innovative structure, the instantaneous output power of TENG and EMG are 0.88 mW at a load of 10 MΩ and 216.7 mW at a load of 60 Ω, respectively. With the aids of a power management circuit, the hybrid nanogenerator can provide continuous power for two hygrothermographs connected in series. In addition, a self-powered wireless acceleration sensing monitoring system(SWAM) is developed to measure the acceleration signals of vibration sources. This study provides a novel guideline for harvesting mechanical vibration energy.

关键词： mechanical vibration energy spring structure triboelectric electromagnetic wireless monitoring system

Measurement of wireless pressure sensors fabricated in high temperature co-fired ceramic MEMS technology

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science C(Computers and Electronics) 2013年第4期14卷 258-263页

作者： Ji-jun XIONG Shi-jun ZHENG Ying-ping HONG Jun LI Ying-lin WANG Wei WANG Qiu-lin TAN Key Laboratory of Instrumentation Science & Dynamic Measurement North University of China MOE Science and technology on Electronic test & Measurement Laboratory North University of China The Second Research Institute of China Electronics technology group Corporation

High temperature co-fired ceramics(HTCCs) have wide applications with stable mechanical properties,but they have not yet been used to fabricate *** introducing the wireless telemetric sensor system and ceramic structure embedding a pressure-deformable cavity,the designed sensors made from HTCC materials(zirconia and 96% alumina) are fabricated,and their capacities for the pressure measurement are tested using a wireless interrogation *** the fabricated sensor,a study is conducted to measure the atmospheric pressure in a sealed *** experimental sensitivity of the device is 2 Hz/Pa of zirconia and 1.08 Hz/Pa of alumina below 0.5 MPa with a readout distance of 2.5 *** described sensor technology can be applied for monitoring of atmospheric pressure to evaluate important component parameters in harsh environments.

关键词： High temperature co-fired ceramic (HTCC) Wireless Micro-electro-mechanical systems (MEMS)

Catalytic Performance of Carbon Smoke over Ag-LSCF Composite Catalysts

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(Materials Science) 2025年第1期40卷 30-34页

作者： GUO Guanlun HAN Ming LU Shaomin YU Jing JU Hongling 无 Hubei Key Laboratory of Advanced technology for Automotive Components&Hubei Collaborative Innovation Center for Automotive Components technology Wuhan University of TechnologyWuhan 430070China College of Mechanical and Transportation Southwest Forestry UniversityKunming 650000China

To improve the catalytic performance of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)towards carbon soot,we utilized the impregnation method to incorporate Ag into the prepared LSCF *** conducted a series of characterization tests and evaluated the soot catalytic activity of the composite catalyst by comparing it with the LaCoO_(3) group,LaFeO_(3) group,and catalyst-free *** results indicate that the Ag-LSCF composite catalyst exhibits the highest soot catalytic activity,with the characteristic temperature values of 376.3,431.1,and 473.9℃at 10%,50%,and 90%carbon soot conversion,*** values are 24.8,20.2,and 23.1℃lower than those of the LSCF *** also shows that LSCF can improve the catalytic activity of soot after compounding with Ag,and reflects the necessity of using catalysts in soot combustion *** characterization and BET test show that Ag-LSCF has more abundant surface-adsorbed oxygen species,larger specific surface area and pore volume than LSCF,which also proves that Ag-LSCF has higher soot catalytic activity.

关键词： metallic composites carbon smoke oxidation perovskite catalyst soot