检索结果-南通市图书馆

The effects of deformation parameters and cooling rates on the aging behavior of AZ80+0.4%Ce

Journal of Magnesium and Alloys 2024年第2期12卷 639-658页

作者： Yongbiao Yang Jinxuan Guo Cuiying Wang Ting Yan Zhang Wenxuan Jiang Zhimin Zhang Qiang Wang Guojun Li Jun Wang College of Materials Science and Engineering North University of ChinaLane 3Xueyuan RoadTaiyuanShanxiChina030051 State Key Laboratory of Advanced stainless steel Materials Taiyuan Iron Steel(Group)Co.Ltd.Taiyuan 030003China technology center Shanxi Taigang Stainless Steel Co.Ltd.Taiyuan 030003China

The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion *** deformed cylindrical specimens were cooled at a cooling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was *** continuous and discontinuous dynamic recrystallization mechanisms were involved in contributing to the grain refinement for all specimens *** a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow cooling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface *** specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were *** aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those decorating the grain boundaries,changed the competition pictures for the LPS and precipitates of other shapes after ***,LPS dominated the areas for the center section of the specimens after aging regardless of deformation *** temperature deformation with high SRPC followed by rapid cooling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.

关键词： AZ80+0.4%Ce magnesium alloy Hot torsion Deformation parameters Cooling rate Aging Micro hardness

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Ni content on the weldability of middle-chromium hyperpure ferritic stainless steels 00Cr21Ti

引用

Baosteel Technical Research 2024年第2期18卷 19-26页

作者： ZHANG Xinbao WANG Zhibin SUN Mingshan YAN Zhifeng WANG Wenxian R&D center for stainless steel Research InstituteChina Baowu Steel Group CorporationTaiyuan 030003China School of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China

Excellent weldability substantially contributes to the intrinsic quality of steels,while appropriate chemical composition plays a primary role in the essential weldability of *** poor weldability of ferritic stainless steels could be improved through modification with minor alloy elements while minimally increasing the ***,studying the effect of minor alloy elements on the weldability of steels is of considerable *** this study,several steels of middle-chromium hyperpure ferritic stainless 00Cr21Ti with different Ni content(0.3%,0.5%,0.8%,and 1.0%)were developed,and their weldabilities of butt joint samples welded using the metal inert gas welding process,including the influence of welded joints on the microstructure,tensile performance,corrosion resistance,and fatigue property,were *** show that the steels with w(Ni)≥0.8%exhibit excellent mechanical properties compared with those with low-Ni content steels,further,their impact toughness at normal atmospheric temperature meets the industrial application standard and the fatigue property is similar to that of 304 austenitic stainless ***,results show that the corrosion resistance of all the samples is almost at the same *** results acquired in this study are supposed to be useful for the optimization of the chemical composition of stainless steels aiming to improve weldability.

关键词： 00Cr21Ti ferritic stainless steel SUS443 welded joint mechanical properties fatigue property Ni content

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Unveiling the cellular microstructure-property relations in martensitic stainless steel via laser powder bed fusion

引用

International Journal of Minerals,Metallurgy and Materials 2024年第11期31卷 2476-2487页

作者： Lingzhi Wu Cong Zhang Dil Faraz Khan Ruijie Zhang Yongwei Wang Xue Jiang Haiqing Yin Xuanhui Qu Geng Liu Jie Su Collaborative Innovation center of steel technology University of Science and Technology BeijingBeijing 100083China Department of Physics University of Science and Technology BannuBannu 28100Pakistan Beijing Advanced Innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Beijing Key Laboratory of Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Institute for Advanced Materials and technology University of Science and Technology BeijingBeijing 100083China Institute for Special steel Research Central Iron and Steel Research InstituteBeijing 100081China

Laser powder bed fusion(LPBF)is a widely recognized additive manufacturing technology that can fabricate complex components rapidly through layer-by-layer ***,there is a paucity of research on the effect of laser scanning speed on the cellular microstructure and mechanical properties of martensitic stainless *** study systematically investigated the influence of laser scanning speed on the cellular microstructure and mechanical properties of a developed Fe11Cr8Ni5Co3Mo martensitic stainless steel produced by *** results show that increasing the laser scanning speed from 400 to 1000 mm/s does not lead to a noticeable change in the phase fraction,but it reduces the average size of the cellular microstructure from 0.60 to 0.35μ*** scanning speeds of 400 and 1000 mm/s both had adverse effects on performances of sample,resulting in inadequate fusion and keyhole defects *** optimal scanning speed for fabricating samples was determined to be 800 mm/s,which obtained the highest room temperature tensile strength and elongation,with the ultimate tensile strength measured at(1088.3±2.0)MPa and the elongation of(16.76±0.10)%.Furthermore,the mechanism of the evolution of surface morphology,defects,and energy input were clarified,and the relationship between cellular microstructure size and mechanical properties was also established.

关键词： laser powder bed fusion martensitic stainless steel cellular microstructure mechanical properties strengthening mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation

引用

Journal of Iron and steel Research International 2024年第2期31卷 475-487页

作者： Shi-guang Xu Jin-shan He Run-ze Zhang Fu-cheng Zhang Xi-tao Wang Collaborative Innovation center of steel technology University of Science and Technology BeijingBeijing100083China State Key Laboratory of Metastable Materials Science and technology Yanshan UniversityQinhuangdao066004HebeiChina Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan250353ShandongChina

Static recrystallization(SRX)behaviors and corresponding recrystallization mechanisms of 7Mo super-austenitic stainless steel were studied under different deformation *** order of influence of deformation parameters on static recrystallization behaviors,from high to low,is followed by temperature,first-stage strain and strain ***,the effect of holding time on static recrystallization behaviors is significantly controlled by *** addition,with the increase in temperature from 1000 to 1200°C,the static recrystallization mechanism evolves from discontinuous static recrystallization and continuous static recrystallization(cSRX)to metadynamic recrystallization and cSRX,and finally to *** cSRX exists at all *** is because high stacking fault energy(56 mJ m−2)promotes the movement of dislocations,making the deformation mechanism of this steel is dominated by planar slip of *** undissolved sigma precipitates promote static recrystallization through particle-stimulated ***,small strain-induced precipitates at grain boundaries hinder the nucleation of conventional SRX and the growth of recrystallized grains,while the hindering effect decreases with the increase in temperature.

关键词： 7Mo super-austenitic stainless steel Double-stage hot deformation Conventional static recrystallization Metadynamic recrystallization Strain-induced precipitation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prediction of Hot Deformation Behavior of 7Mo Super Austenitic stainless steel Based on Back Propagation Neural Network

引用

材料导报 2024年第17期38卷 165-171页

作者： WANG Fan WANG Xitao XU Shiguang HE Jinshan Collaborative Innovation center of steel technology University of Science and Technology BeijingBeijing 100083China Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan 250353China

The hot compression tests of 7Mo super austenitic stainless(SASS)were conducted to obtain flow curves at the temperature of 1000-1200℃and strain rate of 0.001 s^(-1)to 1 s^(-1).To predict the non-linear hot deformation behaviors of the steel,back propagation-artificial neural network(BP-ANN)with 16×8×8 hidden layer neurons was *** predictability of the ANN model is evaluated according to the distribution of mean absolute error(MAE)and relative *** relative error of 85%data for the BP-ANN model is among±5%while only 42.5%data predicted by the Arrhenius constitutive equation is in this ***,at high strain rate and low temperature,the MAE of the ANN model is 2.49%,which has decreases for 18.78%,compared with conventional Arrhenius constitutive equation.

关键词： 7Mo super austenitic stainless steel hot deformation behavior flow stress BP-ANN Arrhenius constitutive equation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cr Release from stainless steels

引用

Journal of Iron and steel Research International 2014年第1期21卷 131-134页

作者： Ru-meng WANG Su-zhen LUO Lai-zhu JIANG technology center for stainless steel Research InstituteBaoshan Iron and Steel Co.Lt

Cr release from stainless steels in different simulant fluids according to different test conditions is carried out with emphasis on ferritic stainless steels. Effects of Cr content and surface roughness on Cr release are discussed specially with a relation to corrosion resistant and passive film formation. Some primary results are attained：（1） higher Cr content means better corrosion resistance including higher potential and lower corrosion rate and less amount of Cr release from base metal; （2） decreasing surface roughness is in favor of the formation of passive film which can re- train Cr release from base metal effectively; （3） Cr content and surface roughness have synthetical effects on Cr release with a narrow innoxious field referring to surface roughness with decreasing Cr content in stainless steels.

关键词： Cr release stainless steel Cr content surface roughness

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure Evolution,Tribological and Corrosion Properties of Amorphous Alloy Strengthening stainless steel Fabricated by Selective Laser Melting in NaCl Solution

引用

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 825-839页

作者： Pengwei Jiang Gang Wang Yaosha Wu Zhigang Zheng Zhaoguo Qiu Tongchun Kuang Jibo Huang Dechang Zeng School of Materials Science and Engineering South China University of TechnologyGuangzhou 510640China Zhongshan R&D center for Materials Surface and Thin Films technology of the South China University of technology Gent Materials Surface Technology(Guangdong)Co.Ltd.Zhongshan 528437China Zhongshan Torch Polytechnic Zhongshan 528436China Yangjiang Branch Guangdong Laboratory Materials Science and Technology Yangjiang Advanced Alloys LaboratoryYangjiang 529599China

As a type of austenitic stainless steel,316L stainless steel has excellent plasticity,corrosion resistance,and biocompatibility,making it widely used in industries,especially in the marine ***,its lower yield strength and wear resistance are the obvious disadvantages that restrict its application in more *** this work,an Fe-based amorphous alloy(Fe^(am))was selected as reinforcement to enhance the 316L stainless steel prepared by selective laser melting(SLM),and microstructure evolution,mechanical properties,tribological and corrosion performance of the SLMed samples were investigated in *** relative density values of both 316L stainless steel and Fe^(am)-reinforced samples are above 99%,which suggests that Fe^(am)-reinforced samples also have outstanding *** the as-etched micrograph,all of the SLMed samples exhibit cellular ***^(am)-reinforced samples have thicker sub-grain boundaries,and retained amorphous phase can be observed in the samples reinforced with 10 wt%and 15 wt%Fe^(am).As the addition of Fe^(am) increases,the microhardness and compression strength of the Fe^(am)-reinforced samples gradually improve and reach 449.2 HV and 2181.9 MPa,*** wear morphologies show that the 316L stainless steel and Fe^(am)-reinforced samples both experience abrasive wear and corrosion wear in a 3.5 wt%NaCl ***,as the amount of Fe^(am) added increases,the coefficient of friction and wear rate of SLMed samples gradually *** to the unreinforced sample,Fe^(am)-reinforced samples have lower corrosion current density and higher pitting potential according to the potentiodynamic polarization curves and also exhibit superior corrosion resistance in the salt spray *** work suggests that the addition of Fe-based amorphous alloy can improve the mechanical properties and wear resistance of 316L stainless steel,as well as its ability to withstand salt spray corrosion.

关键词： Selective laser melting 316L stainless steel Amorphous alloy Tribology Corrosion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

引用

Journal of Iron and steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong Lin Kai-jie Song Zhen Sun Zi-qian Zhu Xue-feng Zhao Constantinos Goulas Wei Ya Xing-hua Yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of technology Chongqing Innovation center Chongqing 401120China Department of Design Production and Management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

引用

Journal of Wuhan University of technology(Materials Science) 2024年第4期39卷 854-862页

作者：闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of TechnologyWuhan 430068China Col-laborative Innovation center of Green Light-weight Materials and Processing Hubei University of TechnologyWuhan 430068China School of Materials and Chemical Engineering Hubei University of TechnologyWuhan 430068China School of Industrial Design Hu-bei University of TechnologyWuhan 430068China State Key Laboratory of Advanced technology for Materials Synthesis and Process-ing Wuhan University of TechnologyWuhan 430070China Science and technology on Thermal Energy and Power Laboratory Wuhan Second Ship Design&Research InstituteWuhan 430205China

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron *** coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to *** surface of the deposited coatings is flat without obvious *** absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is *** heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the *** absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is *** coatings do not fail under this condition and have certain thermal stability.

关键词： AlMoON coating preparation thermal stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interactive effect of thermal aging and proton irradiation on microstructural evolution and hardening ofδ-ferrite in 308L stainless steel weld metal

引用

Journal of Materials Science & technology 2024年第3期170卷 140-155页

作者： Xiaodong Gao Xiaodong Lin Tao Guo Lining Xu Yaolei Han Baolong Jiang Xingyuan Mei Qunjia Peng Lijie Qiao Beijing Advanced Innovation center for Materials Genome Engineering Institute of Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China Institute of Materials Shanghai UniversityShanghai 200072China School of Materials Science and Engineering University of Science and Technology BeijingBeijing 100083China Suzhou Nuclear Power Research Institute Suzhou 215004China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

In the harsh service environment of high temperature and intense neutron irradiation in water-cooled nuclear reactors,the austenitic stainless steel weld overlay cladding on the inner surface of the reactor pressure vessel suffers from thermal aging and irradiation damage simultaneously,which can induce microstructural evolution and hardening of the *** it is quite difficult to achieve this simul-taneous process out of the pile,two kinds of combined experiments,i.e.,post-irradiation thermal aging and post-aging irradiation were performed on 308 L stainless steel weld metals in this *** interactive effect of thermal aging and proton irradiation on microstructural evolution and hardening ofδ-ferrite in 308 L weld metal was investigated by combining atom probe tomography,transmission elec-tron microscopy and nanoindentation *** results revealed that thermal aging could eliminate the dislocation loops induced by irradiation and affect the phase transition process by accelerating spinodal decomposition and G-phase precipitation,thus enhancing hardening of irradiatedδ-*** the effect of irradiation on the microstructure and hardening of thermally agedδ-ferrite,however,intensive collision cascades can intensify G-phase precipitation and dislocation loop formation but decrease spinodal decomposition,leading to a limited effect on hardening of thermally agedδ-***,the interaction of thermal aging and irradiation can promote G-phase ***,the interaction can causeδ-ferrite hardening,which is mainly influenced by spinodal decomposition,followed by G-phase and dislocation loops,where spinodal decomposition and G-phase cause hardening by inducing strain fields.

关键词： Austenitic stainless steel weld metals Thermal aging Proton irradiation Interaction Microstructural evolution Hardening

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：