检索结果-南通市图书馆

Study of inter-well interference in shale gas reservoirs by a robust production data analysis method based on deconvolution

引用

Petroleum Science 2024年第4期21卷 2502-2519页

作者： Wen-Chao Liu Cheng-Cheng Qiao Ping Wang Wen-Song Huang Xiang-Wen Kong Yu-Ping Sun He-Dong Sun Yue-Peng Jia School of Civil and Resource Engineering University of Science and Technology Beijing PetroChina research Institute of Petroleum Exploration and development

In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering, this study proposes a robust production data analysis method based on deconvolution, which is used for multi-well inter-well interference research. In this study, a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established, and its Laplace solutions under two different outer boundary conditions were obtained. Then, an improved pressure deconvolution algorithm was used to normalize the scattered production data. Furthermore, the typical curve fitting was carried out using the production data and the seepage model solution. Finally,some reservoir parameters and fracturing parameters were interpreted, and the intensity of inter-well interference was compared. The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area. The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging. Besides, by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions, the strength of the interference between wells on the same well platform was well judged. This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.

关键词： Shale gas Inter-well interference Deconvolution Production data analysis Typical curves Multi-stage fractured horizontal well

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Active disturbance rejection distributed secondary control for DC microgrids

引用

High Voltage 2024年第1期9卷 241-251页

作者： Jianlin Li Honghao You Shuo Liu Xingchen Li Ziyang Ding Fei Zou National User-Side Energy Storage Innovation research and development Center North China University of TechnologyBeijingChina

A novel control scheme is presented to eliminate the negative effects of communication disturbances,which introduces active disturbance rejection control(ADRC)in the control strategy design to achieve the objectives of the restoration of the bus voltage and the sharing of the power even in the presence of disturbances and delays in ***,its dynamic disturbance decoupling feature is used to realise the decoupling between power and voltage,so that the proposed controller only exchanges power information with its neighbours,reducing the communication burden and simplifying control *** control performance of the strategy is verified by employing steady-state *** impact of controller parameters is studied by establishing a small signal ***,both simulation cases and experimental tests prove the feasibility of this scheme.

关键词： Active disturbance establishing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of syngas components and ash particles on the radiative heat transfer in a radiant syngas cooler

引用

Chinese Journal of Chemical Engineering 2024年第4期68卷 203-215页

作者： Chen Han Youmin Situ Huaxing Zhu Jianliang Xu Zhenghua Dai Guangsuo Yu Haifeng Liu National Energy Coal Gasification technology research and development Center East China University of Science and TechnologyShanghai 200237China Shanghai Engineering research Center of Coal Gasification East China University of Science and TechnologyShanghai 200237China

Radiant syngas cooler(RSC)is widely used as a waste heat recovery equipment in industrial *** this work,an RSC with radiation screens is established and the impact of gaseous radiative property models,gas components,and ash particles on heat transfer is investigated by the numerical simulation *** the syngas components and the pressure environment of the RSC,a modified weighted-sum-of-gray-gases model was *** modified model shows high accuracy in *** computational fluid dynamics simulation,the calculated steam production is only 0.63%in error with the industrial *** with Smith's model,the temperature decay along the axial direction calculated by the modified model is *** components are of great significance to heat recovery capacity,especially when the absorbing gas fraction is less than 10%.After considering the influence of particles,the outlet temperature and the proportion of radiative heat transfer are less affected,but the difference in steam output reaches 2.7 t·h^(-1).The particle deposition on the wall greatly reduces the heat recovery performance of an RSC.

关键词： Radiant syngas cooler Weighted-sum-of-gray-gases model Numerical simulation Particle radiation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimizing temperature coefficient of Sm2Co17-type magnets through adjusting the isothermal aging process

引用

Journal of Rare Earths 2024年第11期42卷 2097-2104页

作者： Chao Wang Die Hu Qiangfeng Li Yikun Fang Meng Zheng Lei Wang Hongsheng Chen Lei Zhao Haizhou Wang Minggang Zhu Wei Li Division of Functional Materials research Central Iron and Steel Research Institute Shanghai Aerospace Control technology Institute Beijing Advanced Innovation Center for Materials Genome Engineering Central Iron and Steel Research Institute Beijing Key Laboratory of Metal Materials Characterization Central Iron and Steel Research Institute

The high-temperature magnetic perfo rmance and micro structure of Sm1-xGdx(CobalFe0.09Cu0.09Zr0.025)7.2（x=0.3,0.5） magnets were *** the isothermal aging time decreasing from 11 to 3 h,the temperature coefficient of intrinsic coercivity in the temperature range of 25-500℃,β25-500℃,was optimized from -0,167%/℃ to-0.112%/℃ for x=0.3 *** noticeable enhancement（～33%） of temperature stability is correlated with the increased content of 1:5H cell boundary phase and its relatively high Curie temperature as ***,for the x=0.5 magnet,it is found that the presence of Sm5Co19phases and wider nanotwin variants hinder the formation of 1:5H cell boundary *** insufficient 1:5H is not beneficial to the proper redistribution of Cu in cell boundary,making the x=0.5 magnet difficult to achieve higher temperature ***,the approach of adjusting the isothermal aging process can offer guidance for attaining superior magnetic performance in the temperature range from 25 to 500℃ for Gd-substituted Sm2Co17-type magnets.

关键词： Isothermal aging process Rare earths Sm2Co17-type magnets Temperature coefficient of intrinsic coercivity

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fracture behavior and mechanism of highly fragmented steel cylindrical shell under explosive loading

引用

Defence technology（防务技术） 2024年第6期36卷 122-132页

作者： Kang Wang Peng Chen Xingyun Sun Yufeng Liu Jiayu Meng Xiaoyuan Li Xiongwei Zheng Chuan Xiao Xi'an Modern Chemistry research Institute Xi'an 710065China Shanxi Jiangyang Chemical Company Limited Taiyuan 030051China Central Iron&steel research Institute Company Limited Beijing 100081China China research and development Academy of Machinery Equipment Beijing 100089China

An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments *** study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery *** with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution *** fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high *** the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell *** the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical *** results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.

关键词： Projectile fragmentation Fragment mass distribution Fracture mode Metallographic structure Damage power

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

research progress in CALPHAD assisted metal additive manufacturing

引用

China Foundry 2024年第4期21卷 295-310页

作者： Ya-qing Hou Xiao-qun Li Wei-dong Cai Qing Chen Wei-ce Gao Du-peng He Xue-hui Chen Hang Su China Iron&steel research Institute Group Beijing 100081China Thermo-Calc Software AB SolnaSE-169Sweden KTH Royal Institute of technology StockholmSE-100Sweden Central Iron and steel research Institute Beijing 100081China

Metal additive manufacturing(MAM)technology has experienced rapid development in recent *** both equipment and materials progress towards increased maturity and commercialization,material metallurgy technology based on high energy sources has become a key factor influencing the future development of *** calculation of phase diagrams(CALPHAD)is an essential method and tool for constructing multi-component phase diagrams by employing experimental phase diagrams and Gibbs free energy models of simple *** combining with the element mobility data and non-equilibrium phase transition model,it has been widely used in the analysis of traditional metal *** development of CALPHAD application technology for MAM is focused on the compositional design of printable materials,the reduction of metallurgical imperfections,and the control of microstructural *** endeavor carries considerable theoretical and practical *** paper summarizes the important achievements of CALPHAD in additive manufacturing(AM)technology in recent years,including material design,process parameter optimization,microstructure evolution simulation,and properties ***,the limitations of applying CALPHAD technology to MAM technology are discussed,along with prospective research directions.

关键词： metal additive manufacturing CALPHAD integrated computational material engineering powder bed fusion material design microstructure simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Wireless semantic communication based on semantic matching multiple access and intent bias multiplexing

引用

The Journal of China Universities of Posts and Telecommunications 2024年第1期31卷 26-36页

作者： Ren Chao He Zongrui Sun Chen Li Haojin Zhang Haijun University of Science and technology Beijing Beijing 100083China research and development Center Sony(China)LimitedBeijing 100027China

This paper proposes a multi-access and multi-user semantic communication scheme based on semantic matching and intent deviation to address the increasing demand for wireless users and *** scheme enables flexible management of long frames,allowing each unit of bandwidth to support a higher number of *** leveraging semantic classification,different users can independently access the network through the transmission of long concatenated sequences without modifying the existing wireless communication *** overcome the potential disadvantage of incomplete semantic database matching leading to semantic intent misunderstanding,the scheme proposes using intent deviation as an *** allows different receivers to interpret the same semantic information differently,enabling multiplexing where one piece of information can serve multiple users with distinct *** results show that at a bit error rate(BER)of 0.1,it is possible to reduce the transmission by approximately 20 semantic basic units.

关键词： semantic communication multiple access multiplexing multimodal communication

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancing Strength-Ductility Synergy of CoCrNi-Based Medium-Entropy Alloy Through Coherent L1_(2)Nanoprecipitates and Grain Boundary Precipitates

引用

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 78-88页

作者： Leilei Li Kaikai Song Qingwei Gao Changshan Zhou Xiaoming Liu Yaocen Wang Xiaojun Bai Chongde Cao School of Physical Science and technology Northwestern Polytechnical UniversityXi’an710016China Weihai research Institute of Industrial technology Shandong UniversityWeihai264209China research and development Institute of Northwestern Polytechnical University in ShenzhenShenzhen518057China

The L1_(2)-strengthened Co_(34)Cr_(32)Ni_(27)Al_(4)Ti_(3)medium-entropy alloy(MEA)with precipitations of grain boundaries has been developed through selective laser melting(SLM)followed by cold rolling and annealing,exhibiting excellent strength-ductility *** as-printed alloy exhibits low yield strength(YS)of~384 MPa,ultimate tensile strength(UTS)of~453 MPa,and uniform elongation(UE)of 1.5%due to the existence of the SLM-induced *** cold rolling and annealing,the YS,UTS,and UE are significantly increased to~739 MPa,~1230 MPa,and~47%,*** enhancement primarily originates from the refined grain structure induced by cold rolling and *** presence of coherent sphericalγ'precipitates(L1_(2)phases)and Al/Ti-rich precipitates at the grain boundaries,coupled with increased lattice defects such as dislocations,stacking faults,and ultrafine deformation twins,further contribute to the property’s *** study highlights the potential of SLM in producing high-strength and ductile MEA with coherent L1_(2)nanoprecipitates,which can be further optimized through subsequent rolling and annealing *** findings offer valuable insights for the development of high-performance alloys for future engineering applications.

关键词： Medium-entropy alloy Selective laser melting Precipitation Strength Ductility

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Automatic modulation recognition of radio fuzes using a DR2D-based adaptive denoising method and textural feature extraction

引用

Defence technology（防务技术） 2024年第4期34卷 328-338页

作者： Yangtian Liu Xiaopeng Yan Qiang Liu Tai An Jian Dai Science and technology on Electromechanical Dynamic Control Laboratory School of Mechatronical EngineeringBeijing Institute of TechnologyBeijing 100081China China research and development Academy of Machinery Equipment Beijing 100089China

The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference ***,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio *** solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is ***,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)***,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for *** DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical *** trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.

关键词： Automatic modulation recognition Adaptive denoising Data rearrangement and the 2D FFT(DR2D) Radio fuze

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selective core-shell doping enabling high performance 4.6 V-LiCoO2

引用

Journal of Energy Chemistry 2024年第8期95卷 684-693页

作者： Yueming Xia Jianrui Feng Jinhui Li Yan Li Zhengfeng Zhang Xiaoqi Wang Jianli Shao Manling Sui Pengfei Yan Beijing Key Laboratory of Microstructure and Property of Solids College of Materials Science & Engineering Beijing University of Technology Petro China research Institute of Petroleum Exploration & development State Key Laboratory of Explosion Science and technology Beijing Institute of Technology

Constructing robust surface and bulk structure is the prerequisite for realizing high performance high voltage LiCoO2（LCO）.Herein,we manage to synthesize a surface Mg-doping and bulk Al-doping coreshell structured LCO,which demonstrates excellent cycling ***-cell shows 94.2% capacity retention after 100 cycles at 3.0-4.6 V（***/Li+） cycling,and no capacity decay after 300 cycles for fullcell test（3.0-4.55 V）.Based on comprehensive microanalysis and theoretical calculations,the degradation mechanisms and doping effects are systematically *** the undoped LCO,high voltage cycling induces severe interfacial and bulk degradations,where cracks,stripe defects,fatigue H2 phase,and spinel phase are identified in grain *** the doped LCO,Mg-doped surface shell can suppress the interfacial degradations,which not only stabilizes the surface structure by forming a thin rock-salt layer but also significantly improves the electronic conductivity,thus enabling superior rate *** Al-doping can suppress the lattice "breathing" effect and the detrimental H3 to H1-3 phase transition,which minimizes the internal strain and defects growth,maintaining the layered structure after prolonged *** theoretical calculations,this work deepens our understanding of the doping effects of Mg and Al,which is valuable in guiding the future material design of high voltage LCO.

关键词： Doping effect Electron microscopy Failure mechanism High-voltage LiCoO2 Lithium-ion battery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：