检索结果-南通市图书馆

Turbulent Agglomeration of Microparticles in a Cylinder Wake Flow Using LES-DEM:Focusing on the Effect of the Reynolds Number

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 34-49页

作者： WANG Shuang MU Lin LI Xue XIE Jun DONG Ming School of energy and Power Engineering Dalian University of Technology School of Optical Information and energy Engineering Wuhan Institute of Technology School of energy and Environment Shenyang Aerospace University

Turbulent agglomeration is viewed as a promising technology for enhancing fine particle removal *** better understand particle transport,agglomeration behaviors,and fluid-particle interactions,we numerically explored these phenomena under cylindrical vortex wake influence using a coupled large eddy simulation and discrete element method（LES-DEM） *** validity of the LES approach was verified by comparison with available direct numerical simulation（DNS） *** adopted the Johnson-Kendall-Roberts（JKR） contact model for particle-particle *** particle dispersion and agglomeration characteristics of particles with different diameters（dp=2-20 μm） in the laminar and transition of shear layer（TrSL） flow regimes were *** particles were concentrated at the vortex centers,while larger particles accumulated around the *** agglomeration efficiency exhibited an M-shaped profile spanwise（y-direction）.With increasing Reynolds number,the agglomeration efficiency and turbulence intensity *** particle agglomeration efficiency peaks at a certain Reynolds ***,at higher Reynolds numbers,reducing the residence time of particles in the flow field decreases the agglomeration efficiency.

关键词： discrete element method large eddy simulation microparticle particle agglomeration

Recent Advancements in the Optimization Capacity Configuration and Coordination Operation Strategy of Wind-Solar Hybrid Storage System

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

energy Engineering 2025年第1期122卷 285-306页

作者： Hongliang Hao Caifeng Wen Feifei Xue HaoQiu Ning Yang Yuwen Zhang Chaoyu Wang Edwin E.Nyakilla Department of New energy Storage Peking University Ordos Research Institute of EnergyOrdos017010China School of energy and Power Engineering Inner Mongolia University of TechnologyHohhot010080China Key Laboratory of Wind energy and Solar energy Utilization technology Inner Mongolia University of TechnologyHohhot010051China

Present of wind power is sporadically and cannot be utilized as the only fundamental load of energy *** paper proposes a wind-solar hybrid energy storage system(HESS)to ensure a stable supply grid for a longer period.A multi-objective genetic algorithm(MOGA)and state of charge(SOC)region division for the batteries are introduced to solve the objective function and configuration of the system capacity,***/Simulink was used for simulation *** optimization results show that for a 0.5 MW wind power and 0.5 MW photovoltaic system,with a combination of a 300 Ah lithium battery,a 200 Ah lead-acid battery,and a water storage tank,the proposed strategy reduces the system construction cost by approximately 18,000 ***,the cycle count of the electrochemical energy storage systemincreases from4515 to 4660,while the depth of discharge decreases from 55.37%to 53.65%,achieving shallow charging and discharging,thereby extending battery life and reducing grid voltage fluctuations *** proposed strategy is a guide for stabilizing the grid connection of wind and solar power generation,capability allocation,and energy management of energy conservation systems.

关键词： Electric-thermal hybrid storage modal decomposition multi-objective genetic algorithm capacity optimization allocation operation strategy

Pulsed dynamic electrolysis enhanced PEMWE hydrogen production:Revealing the effects of pulsed electric fields on protons mass transport and hydrogen bubble escape

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2025年第1期100卷 201-214页

作者： Xuewei Zhang Wei Zhou Yuming Huang Liang Xie Tonghui Li Huimin Kang Lijie Wang Yang Yu Yani Ding Junfeng Li Jiaxiang Chen Miaoting Sun Shuo Cheng Xiaoxiao Meng Jihui Gao Guangbo Zhao School of energy Science and Engineering Harbin Institute of Technology China Datang technology Innovation Co. Ltd

The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis （PEMWE） emerging as the preeminent pathway for hydrogen *** remarkable advancements in this field,confronting the sluggish electrochemical kinetics and inherent high-energy consumption arising from deteriorated mass transport within PEMWE systems remains a formidable *** impediment stems primarily from the hindered protons mass transfer and the untimely hydrogen bubbles *** address these challenges,we harness the inherent variability of electrical energy and introduce an innovative pulsed dynamic water electrolysis *** to constant voltage electrolysis (hydrogen production rate:51.6 m L h-1,energy consumption:5.37 kWh Nm-3H2),this strategy (hydrogen production rate:66 m L h-1,energy consumption:3.83 kWh Nm-3H2) increases the hydrogen production rate by approximately 27%and reduces the energy consumption by about 28%.Furthermore,we demonstrate the practicality of this system by integrating it with an off-grid photovoltaic （PV） system designed for outdoor operation,successfully driving a hydrogen production current of up to 500 mA under an average voltage of approximately 2 *** combined results of in-situ characterization and finite element analysis reveal the performance enhancement mechanism:pulsed dynamic electrolysis （PDE） dramatically accelerates the enrichment of protons at the electrode/solution interface and facilitates the release of bubbles on the electrode *** such,PDE-enhanced PEMWE represents a synergistic advancement,concurrently enhancing both the hydrogen generation reaction and associated transport *** promising technology not only redefines the landscape of electrolysis-based hydrogen production but also holds immense potential for broadening its application across a diverse spectrum of electrocatalytic endeavors.

关键词： Electrolysis

Engineering nanoparticle structure at synergistic Ru-Na interface for integrated CO2 capture and hydrogenation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2025年第1期100卷 779-791页

作者： Hanzi Liu Ling Cen Xinlin Xie Lei Liu Zhao Sun Zhiqiang Sun Hunan Engineering Research Center of Clean and Low-Carbon energy technology School of Energy Science and Engineering Central South University

The development of dual functional material for cyclic CO2capture and hydrogenation is of great significance for converting diluted CO2into valuable fuels,but suffers from kinetic limitation and deactivation of adsorbent and ***,we engineered a series of RuNa/γ-Al2O3materials,varying the size of ruthenium from single atoms to clusters/*** coordination environment and structure sensitivity of ruthenium were quantitatively investigated at atomic *** findings reveal that the reduced Ru nanoparticles,approximately 7.1 nm in diameter with a Ru-Ru coordination number of 5.9,exhibit high methane formation activity and selectivity at 340°*** Ru-Na interfacial sites facilitate CO2migration through a deoxygenation pathway,involving carbonate dissociation,carbonyl formation,and ***-situ experiments and theoretical calculations show that stable carbonyl intermediates on metallic Ru nanoparticles facilitate heterolytic C–O scission and C–H bonding,significantly lowering the energy barrier for activating stored CO2.

关键词： Carbon capture and utilization

A Wind Tunnel Experimental Study on the Wake Characteristics of a Horizontal Axis Wind Turbine

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 145-158页

作者： GUO Xingduo LI Yinran LI Rennian MA Yulong WEI Kui College of energy and Power Engineering Lanzhou University of Technology Key Laboratory of Fluid Machinery and Systems Gansu Provincial technology Centre for Wind Turbines

The characteristics of wind turbine wakes are influenced by multiple factors,including the atmospheric boundary layer(ABL) wind and wind turbine operating conditions(e.g.,tip speed ratio and yaw angle).In this study,two types of ABL winds with different velocity gradients and turbulence intensities are generated in a wind tunnel through configurations of spires,baffles,and various numbers of roughness elements.A wind turbine with a rotor diameter of 0.8 m and a hub height of 0.6 m is tested under varying tip speed ratios,yaw angles,and ABL wind *** results indicate that the streamwise velocity deficit in the near-wake region becomes more pronounced with an increase in the tip speed ratio,while the far-wake velocity deficit remains largely unaffected by changes in the tip speed *** the yaw angle increases,the wake deflection becomes more prominent and the wake narrows;the offset of the wake center at various downstream positions grows linearly,reaching a maximum value of approximately half the rotor ***,the turbulence level and influence range in the wake region are reduced when the turbine is *** ABL wind conditions,high turbulence intensity in the incoming flow accelerates wake recovery,and the Reynolds stress at different lateral positions tends to become consistent with increasing longitudinal ***,turbulence has a significant impact on the meandering characteristics of the wind turbine wake,with greater fluctuations in the wake center observed under higher turbulence ***,this study provides insights that could inform the optimal operation of wind farms.

关键词： horizontal axis wind turbine turbulence wind tunnel experiment wind turbine wake

Flexible molecules dedicate to release strain of inverted inorganic perovskite solar cell

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2025年第1期100卷 87-93页

作者： Hongrui Sun Sanlong Wang Pengyang Wang Yali Liu Shanshan Qi Biao Shi Ying Zhao Xiaodan Zhang Institute of Photoelectronic Thin Film Devices and technology Renewable Energy Conversion and Storage Center State Key Laboratory of Photovoltaic Materials and CellsNankai University Key Laboratory of Photoelectronic Thin Film Devices and technology of Tianjin Haihe Laboratory of sustainable Chemical Transformations Engineering Research Center of Thin Film Photoelectronic technology of Ministry of Education Collaborative Innovation Center of Chemical Science and Engineering (Tianjin)

The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells （IPSCs）,which reduces the defect formation ***,a flexible molecule 5-maleimidovaleric acid （5-MVA） was introduced as a strain buffer to release the residual strain of *** anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb2+through Lewis acid-base reaction,thus tightly“pull”the perovskite *** in-between soft carbon chain increased the structural flexibility of CsPbI2.85Br0.15perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI2.85Br0.15,resisted the corrosion of external strain,and also reduced the formation of defects such as VIand *** addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level ***,power conversion efficiency （PCE） of NiOxbased inverted IPSCs increased from 19.25% to 20.82% with the open-circuit voltage enhanced from 1.164 V to 1.230 *** release of strain also improved the stability of CsPbI2.85Br0.15perovskite films and devices.

关键词： Perovskite solar cells

Constructing Pr-doped CoOOH catalytic sites for efficient electrooxidation of 5-hydroxymethylfurfural

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2025年第1期100卷 234-244页

作者： Botao Fan Hao Zhang Bang Gu Feng Qiu Qiue Cao Wenhao Fang School of Chemical Science and technology Yunnan University National Center for International Research on Photoelectric and energy Materials School of Materials and Energy Yunnan University

Electrocatalytic conversion of renewable biomass is emerging as a promising route for sustainable chemical production;hence it urgently calls for developing efficient electrocatalysts with low potentials and high current ***,a Pr-doped Co（OH）2hexagonal sheet （Pr/Co=1/9,in mole） is synthesized by electrodeposition as highly performant catalyst for 5-hydroxymethylfurfural （HMF） oxidation reaction（HMFOR） to produce 2,5-furandicarboxylic acid （FDCA）.This novel and low-cost catalyst possesses a rather low onset potential of 1.05 V （***） and requires only 1.10 V （***） to reach a current density of 10 mA cm-2for HMFOR,significantly outperforming Co（OH）2benchmark (i.e.,210 mV higher to reach10 m A cm-2).The origin of Pr promotion effect as well as the evolution of CoOOH catalytic sites and HMFOR process has been deeply elucidated by physical characterizations,kinetic experiments,in situ electrochemical techniques,and theoretical *** unique Pr-ameliorated CoOOH active centers enable 100%conversion of HMF,99.6%selectivity of FDCA,and 99.7%Faraday efficiency,with a superior cycling durability toward *** can be one of the most outstanding results for Co-based HMFOR catalysts to date in the *** this work can help open up new horizons for constructing novel and efficient Co-based electrocatalysts by the utilization of lanthanide elements.

关键词： Bioconversion

Numerical Study of Flow and Heat Transfer Characteristics of Shell-and-Tube Molten Salt Electric Heater with Circularly Perforated Baffles

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 24-33页

作者： LIN Yongjie ZHANG Cancan WU Yuting ZHANG Yi LU Yuanwei Key Laboratory of Heat Transfer and energy Conversion National User-Side Energy Storage Innovation Research and Development CenterBeijing University of Technology

Numerical simulations of the flow and heat transfer characteristics of four shell-and-tube molten salt electric heaters with different perforation rates was ***-and-tube electric heaters have the same geometry and tube arrangement,and all of them use single segmental baffles,but there exist four different baffle openings（φ）,i.e.,0%,2.52%,4.06%,and 6.31%.The results indicated that the reasonable baffle opening could significantly reduce the shell-side pressure drop,effectively decreasing the shell-side flow dead zone *** can eliminate the local high-temperature phenomenon on the surface of electric heating tubes,but the heat transfer coefficient is slightly *** perforated schemes significantly reduce shell-side pressure drop compared to the baseline solution without open *** particular,the φ=6.31% scheme exhibits the optimal performance among all the schemes,with a maximum reduction of up to 50.50% in shell-side pressure drop relative to the unopened holes *** heat transfer coefficient is the highest for φ=0%,exhibiting a range of5.26% to 5.73%,5.14% to 5.99%,and 7.31% to 8.54% higher than φ=2.52%,4.06%,and 6.31%,respectively,within the calculated *** composite index h/（Δp）1/3was higher for all open-hole solutions than that for the unopened-hole *** best overall performance was for φ=6.31%,which improved the composite index by15.29% to 17.18% over the unopened-hole solution.

关键词： molten salt electric heater perforated baffles heat transfer

Dynamic behaviors of graphene platelets-reinforced metal foam piezoelectric beams with velocity feedback control

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 63-80页

作者： Jie CHEN Xinyue ZHANG Mingyang FAN School of Mathematics Statistics and Mechanics Beijing University of Technology College of Mechanical & energy Engineering Beijing University of Technology

Graphene platelets(GPLs)-reinforced metal foam structures enhance the mechanical properties while maintaining the lightweight characteristics of metal foams. Further bonding piezoelectric actuator and sensor layers on the surfaces of GPLs-reinforced metal foam beams enables active vibration control, greatly expanding their applications in the aerospace industry. For the first time, this paper investigates the vibration characteristics and active vibration control of GPLs-reinforced metal foam beams with surfacebonded piezoelectric layers. The constant velocity feedback scheme is used to design the closed-loop controller including piezoelectric actuators and sensors. The effects of the GPLs on the linear and nonlinear free vibrations of the beams are numerically *** Newmark-β method combined with Newton's iteration technique is used to calculate the nonlinear responses of the beams under different load forms including harmonic loads,impact loads, and moving loads. Additionally, special attention is given to the vibration reduction performance of the velocity feedback control on the responses of the beam.

关键词： Piezoelectric actuators